Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Trigger”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Effects of Trigger Method on Fire Propagation during the Thermal Runaway Process in Li-ion Batteries

Lithium-ion batteries are prone to fire hazards due to the possibility of thermal runaway propagation. During battery product development and subsequent safety tests for design validation and safety certification, the thermal runaway onset is triggered by various test methods such as nail penetration, thermal ramp, or external short circuit. This failure initiation method affects the amount of heat contributions and the composition of gas generations. This study compares two such trigger methods, external heating and using a thermally-activated internal short circuit device (ISCD). The effects of the trigger method on total heat generation are experimentally investigated within 18650 cylindrical cells at single cell level as well as at multiple cell configuration level. The severity of failure was observed to be worse for cells with ISCDs at single cell level, whereas quite the opposite results were observed at multiple cell configuration level. A preliminary numerical analysis was performed to better understand the battery safety performance with respect to thermal runaway trigger methods and heat transfer conditions.

25 ENERGY STORAGE↗

Dual Triggered Beam Extraction Kicker (Rev. 1)

A Blumlein modulator is a relatively inexpensive pulsed power device that can deliver highly repeatable pulses that can be used to change the path of beam pulses. The modulator is primarily built with transmission line cable which is relatively inexpensive. Due to the highly repeatable nature of a Blumlein modulator it is a great tool for kicking beam pulses while producing very little spill or losses in beam current. One of the challenges with a Blumlein kicker is that the length of the kicking pulse output by the modulator is determined by the length of the cables. Cable lengths are set prior to implementation for the desired kicking pulse width. The Blumlein modulator at LANSCE uses a single thyratron which can deliver two 50-kilovolt 1,000-amp pulses of opposite polarity to kicking plates at the same time. This method makes for a very strong kick that is highly repeatable. A method that has been discussed, to deliver a different pulse width, is to add a second trigger that would be fired, once the desired pulse width has been delivered, cutting out the remaining pulse. The second trigger would offer a lot of variability with the pulse width of the kicker. This method has only ever been attempted using low current and relatively low voltages compared to the scale needed to properly kick a beam pulse. This in turn allows for the use of power supplies with a higher repetition rate. The advancement of this standard kicker technology in the accelerator facilities would attract attention within the scientific and engineering communities. The project detailed within will investigate the capabilities of different triggering topologies and design a prototype dual triggered Blumlein kicker modulator capable of variable kicking pulse width.

43 PARTICLE ACCELERATORS↗

Efficiency of ML Anomaly Detection Triggers for Emerging Jets

Novel machine learning-based anomaly detection Level 1 (L1) triggers are currently under development at CMS, namely AXOL1TL and CICADA. The former employs a variational autoencoder, while the latter utilizes a convolutional autoencoder. These triggers aim to balance rate reduction with model independence, enabling the selection of potentially significant events that might be overlooked by traditional triggers relying on basic kinematic variable selections. Consequently, they have the potential to enhance signals indicative of physics beyond the Standard Model, such as those associated with emerging jets. Such signals are predicted by models featuring a composite dark sector where long-lived particles decay into Standard Model jets with displaced tracks and numerous vertices. This study evaluates the efficiency of these anomaly detection triggers in selecting events with emerging jets produced via the s-channel production of two dark quarks.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A New Track Trigger for Characterization of the Antiproton-Induced Background in the Mu2e Experiment

The Mu2e experiment at Fermilab will enable the search for the neutrinoless muon to electron conversion in the field of an Al nucleus, a charged lepton flavor violating process. If observed, there would be a clear indication of physics beyond the Standard Model. Mu2e aims to reach a single event sensitivity of $3 /times 10^{-17}$, improving from the previous limit by 4 orders of magnitude. This improvement relies on the development of trigger selection systems, designed to discard data from background-induced events by placing kinematic, topological cuts on a particle’s reconstructed track. One of the largest sources of background Mu2e faces is proton-antiproton annihilation. These annihilations produce a 2 GeV shower of particles, among which there could be an electron that mimics the conversion electron signal, with an expected number of 0.010 ± 0.010. The large uncertainty on this number is dominated by the systematic uncertainty associated with the theoretical production model. To better characterize this background, we have developed an antiproton trigger selection by taking advantage of the track multiplicity and topology of these events. We discuss the steps taken in this development and the first performance study of this trigger, evaluating the signal efficiency and background rate. This trigger is essential to enable a data-driven analysis targeting the reduction of the systematic uncertainty of the antiproton-induced background in the Mu2e experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Commissioning of the trigger system for the ICARUS T600 LAr-TPC detector in SBN Program

The ICARUS experiment at Fermilab is the far detector of the Short Baseline Neutrino Program (SBN), aimed at studing the neutrino oscillation to find a fourth type of neutrino, called sterile neutrino. A key component for this detector is the trigger system, which aims to identify and isolate the physical interactions from the background events. In this framework my internship program was dedicated to the development of trigger logic and trigger inhibit mechanism in order to select the genuine neutrino interaction and to guarantee a correct functioning of the readout system. These two steps, that represent a part of the commissioning of the trigger system, were implemented with LabVIEW Software. The obtained results are a fundamental step towards a succesful activation of the detector in the next few months.

43 PARTICLE ACCELERATORS↗

Kilonova Luminosity Function Constraints Based on Zwicky Transient Facility Searches for 13 Neutron Star Merger Triggers during O3

We present a systematic search for optical counterparts to 13 gravitational wave (GW) triggers involving at least one neutron star during LIGO/Virgo's third observing run (O3). We searched binary neutron star (BNS) and neutron star black hole (NSBH) merger localizations with the Zwicky Transient Facility (ZTF) and undertook follow-up with the Global Relay of Observatories Watching Transients Happen (GROWTH) collaboration. The GW triggers had a median localization area of 4480 deg 2 , a median distance of 267 Mpc, and false-alarm rates ranging from 1.5 to 10 -25 yr -1 . The ZTF coverage in the g and r bands had a median enclosed probability of 39%, median depth of 20.8 mag, and median time lag between merger and the start of observations of 1.5 hr. The O3 follow-up by the GROWTH team comprised 340 UltraViolet/Optical/InfraRed (UVOIR) photometric points, 64 OIR spectra, and three radio images using 17 different telescopes. We find no promising kilonovae (radioactivity-powered counterparts), and we show how to convert the upper limits to constrain the underlying kilonova luminosity function. Initially, we assume that all GW triggers are bona fide astrophysical events regardless of false-alarm rate and that kilonovae accompanying BNS and NSBH mergers are drawn from a common population; later, we relax these assumptions. Assuming that all kilonovae are at least as luminous as the discovery magnitude of GW170817 (-16.1 mag), we calculate that our joint probability of detecting zero kilonovae is only 4.2%. If we assume that all kilonovae are brighter than-16.6 mag (the extrapolated peak magnitude of GW170817) and fade at a rate of 1 mag day -1 (similar to GW170817), the joint probability of zero detections is 7%. If we separate the NSBH and BNS populations based on the online classifications, the joint probability of zero detections, assuming all kilonovae are brighter than -16.6 mag, is 9.7% for NSBH and 7.9% for BNS mergers. Moreover, no more than <57% (<89%) of putative kilonovae could be brighter than -16.6 mag assuming flat evolution (fading by 1 mag day -1 ) at the 90% confidence level. If we further take into account the online terrestrial probability for each GW trigger, we find that no more than <68% of putative kilonovae could be brighter than -16.6 mag. Comparing to model grids, we find that some kilonovae must have M ej < 0.03 M ⊙ , X lan > 10 -4 , or φ > 30° to be consistent with our limits. We look forward to searches in the fourth GW observing run; even 17 neutron star mergers with only 50% coverage to a depth of-16 mag would constrain the maximum fraction of bright kilonovae to <25%.

79 ASTRONOMY AND ASTROPHYSICS↗

ISEE-1 observations in the magnetosphere of VLF emissions triggered by nonducted coherent VLF waves during VLF wave-injection experiments

It is noted that recent data from the ISEE-1 spacecraft indicate that VLF emissions triggered by conducted coherent VLF waves often possess spectral characteristics markedly different from those of emissions triggered by ducted waves. Emission triggering by nonducted waves is found to involve a strong path selectiveness. It is also established that emission triggering by nonducted waves can take place over a wide L-range and may involve inner radiation belt particles of energy up to 200 keV. It is concluded that the VLF emission generation process can occur under much more general conditions than previously believed on the basis of the results of ground-to-ground wave-injection experiments.

Bell, T. F.↗

Triggered Jovian radio emissions

Certain Jovian radio emissions seem to be triggered from outside, by much weaker radio waves from the sun. Recently found in the Voyager observations near Jupiter, such triggering occurs at hectometric wavelengths during the arrival of solar radio bursts, with the triggered emissions lasting sometimes more than an hour as they slowly drifted toward higher frequencies. Like the previous discovery of similar triggered emissions at the earth, this suggests that Jupiter's emissions might also originate from natural radio lasers.

Calvert, W.↗

Whistler-triggered VLF noise bursts observed on the DE-1 satellite and simultaneously at Antarctic ground stations

Simultaneous observations of whistler-triggered very low-frequency noise bursts on the ground at Anarctic stations, Halley and Siple, and on the high-altitude satellite DE-1 are reported. Results of a case study from June 25, 1982 in which the satellite data were recorded near 25 deg south magnetic latitude and the L = 4.7 magnetic shell, are presented. Analysis indicates that the chorus bursts that are triggered in whistler ducts travel downwards in the ducts to low altitudes in the ionosphere, and that propagation to DE-1 is by upward reflection into a nonducted mode. A means of estimating the propagation characteristics of the wave bursts is provided by comparisons of nonducted signals from the Siple transmitter and discrete periodic emissions. The ducted-nonducted mode conversion process is a mechanism for the large-scale spreading into the magnetosphere of coherent whistler-mode wave energy which is generated, amplified, or triggered in small localized ducts. The DE-1 data show that a strong interaction exists between whistler-triggered noise bursts and prevailing hiss levels.

Smith, A. J.↗

VLF noises triggered by whistlers as observed in the topside ionosphere

ISIS-1, ISIS-2, and DE-1 VLF electric field data from Kashima station, Japan are used to investigate characteristics of whistler triggered emissions in the topside ionosphere. The occurrence rate for nonducted whistler triggered emission is shown to be distributed randomly between L = 2.0 and 4.2, while the occurrence rate of ducted whistler triggered emissions increases with latitudes between L = 1.5 and 2.9, attains a maximum at L = 2.7, and abruptly drops off at L = 3.0. The findings indicate that some whistler triggered emissions may be generated by the interaction of whistlers with magnetospheric electrons.

Nakamura, Yoshikatsu↗

Hand trigger system for bi-lateral gripping control in teleoperation

A device for human operator control of a robotic gripper has been developed and preliminary evaluation has been performed. The JPL Force Reflecting Hand Trigger system features an instrumented index finger trigger with load cell detection of finger force, a servo-controlled, lead-screw-driven backdrive capability by which the trigger's position can be made to follow that of the remotely controlled gripper, and a novel feedback mechanism by which clamping force or some other signal can be fed back by a swiveling motion, also servo-controlled, of the trigger surface (force reflection). This system has undergone preliminary testing in which the amount of force reflection is varied and dynamic force-tracking response is observed.

Fiorini, Paolo↗

Triggering of longitudinal combustion instabilities in solid rocket motors: Nonlinear combustion response

Pulsed oscillations in solid rocket motors are investigated with emphasis on nonlinear combustion response. The study employs a wave equation governing the unsteady motions in a two-phase flow, and a solution technique based on spatial- and time-averaging. A wide class of combustion response functions is studied to second-order in fluctuation amplitude to determine if, when, and how triggered instabilities arise. Conditions for triggering are derived from analysis of limit cycles, and regions of triggering are found in parametric space. Based on the behavior of model dynamical systems, introduction of linear cross-coupling and quadratic self-coupling among the acoustic modes appears to be the manner in which the nonlinear combustion response produces triggering to a stable limit cycle. Regions of initial conditions corresponding to stable pulses were found, suggesting that stability depends on initial phase angle and harmonic content, as well as the composite amplitude, of the pulse.

Wicker, J. M.↗

Fast Plasma Investigation for MMS: Simulation of the Burst Triggering System

The Magnetospheric Multiscale (MMS) mission will study small-scale reconnection structures and their rapid motions from closely spaced platforms using instruments capable of high angular, energy, and time resolution measurements. To meet these requirements, the Fast Plasma Instrument (FPI) consists of eight (8) identical half top-hat electron sensors and eight (8) identical ion sensors and an Instrument Data Processing Unit (IDPU). The sensors (electron or ion) are grouped into pairs whose 6 degree x 180 degree fields-of-view (FOV) are set 90 degrees apart. Each sensor is equipped with electrostatic aperture steering to allow the sensor to scan a 45 degree x 180 degree fan about the its nominal viewing (0 deflection) direction. Each pair of sensors, known as the Dual Electron Spectrometer (DES) and the Dual Ion Spectrometer (DIS), occupies a quadrant on the MMS spacecraft and the combination of the eight electron/ion sensors, employing aperture steering, image the full-sky every 30-ms (electrons) and 150-ms (ions), respectively. To probe the diffusion regions of reconnection, the highest temporal/spatial resolution mode of FPI results in the DES complement of a given spacecraft generating 6.5-Mb (raised dot) per second of electron data while the DIS generates 1.1-Mb (raised dot) per second of ion data yielding an FPI total data rate of 6.6-Mb (raised dot) per second. The FPI electron/ion data is collected by the IDPU then transmitted to the Central Data Instrument Processor (CIDP) on the spacecraft for science interest ranking. Only data sequences that contain the greatest amount of temporal/spatial structure will be intelligently down-linked by the spacecraft. This requires a data ranking process known as the burst trigger system. The burst trigger system uses pseudo physical quantities to approximate the local plasma environments. As each pseudo quantity will have a different value, a set of two scaling factors is employed for each pseudo term. These pseudo quantities are then combined at the instrument, spacecraft, and observatory level leading to a final ranking of data based on expected scientific interest. Here, we present simulations of the fixed point burst trigger system for the FPI. A variety of data sets based on previous mission data as well as analytical formulations are tested. Comparisons of floating point calculations versus the fixed point hardware simulation are shown. Analysis of the potential sources of error from overflows, quantization, etc. are examined and mitigation methods are presented. Finally a series of calibration curves are presented, showing the expected error in pseudo quantities based solely on the scale parameters chosen and the expected data range. We conclude with a presentation of the current base-lined FPI burst trigger approach.

Barrie, A. C.↗

Meteorological Aspects of Two Modes of Lightning Triggered Upward Lightning (LTUL) Events in Sprite-Producing MCSs

During the 2013 convective storm season, a high resolution 3-D Lightning Mapping Array was deployed to north central Kansas (Cummins et al, this conference.) In conjunction with fixed and mobile camera systems and electric field mills, this allowed for detailed investigations of lightning induced upward lighting (LTUL) discharges from tall objects in the region, including wind turbines. Also, concurrent observations using a network of low-light cameras deployed over the central U.S. as part of the PhOCAL program detected transient luminous events (TLEs) above the Kansas LMA (KSLMA). During the night of 29-30 May 2013, waves of precipitation associated with several large MCSs traversing Kansas moved through the KSLMA domain. We focus on two LTUL events that exemplify two modes of upward lightning production from tall structures. At 0859Z, 30 May 2013, a nearby + 92 kA CG, with extensive in-cloud branching passing overhead a wind farm, was followed by complex LTUL discharges from four turbines. In addition, a sprite was confirmed by the Bennett, CO SpriteNet camera. The parent flash covered a very large area. It initiated near the MCS convective leading line ~150 km to the south, and traveled into a stratiform precipitation maximum over the KSLMA. Typically when a +CG precedes an LTUL, the triggering component is either 1) the return stroke that traverses the leader network which initially forms near the towers or 2) new negative leader activity that develops once the return stroke reaches the end of the initial leader network that may not have initially been near the tower. In the latter case, the new leader development passes near the towers and triggers upward positive leaders similar to those associated with only an intracloud flash. The +CG return stroke may hit >10 km from the towers and the new leader development may travel extensive distances before getting close enough to the towers to trigger upward lightning. In this case, there was the typical long delay between the +CG return stroke and LTUL initiation (10s to 100s of ms). The parent lightning discharges for both sprites and LTULs have many common aspects and tend to occur in similar meteorological regimes, with the two phenomena often occurring together. An earlier LUTL, at 2320Z, 29 May 2013 was captured at 9900 fps by a Phantom camera in the PhOCAL mobile Lightning Investigation Vehicle (LIV). This discharge, exhibiting numerous recoil leaders, also occurred in a stratiform region some ~50-100 km north of an MCS convective core. While there was no preceding +CG, there was an extensive network of IC channels, one of which passed overhead close to the turbine. These observations are consistent with the ongoing UPLIGHTS studies of LTULs from tall towers in Rapid City. While a +CG is usually involved (~85% of the time), the LTUL occurs because of the associated extensive in cloud components passing over towers. The earlier case without a +CG typifies this second mode where the triggering component is a negative leader associated with the IC activity passing near the towers initiates the upward positive leaders. We will discuss the parent discharges, shown in their meteorological (radar and satellite) context, and attempt to better understand the charge structures present in both the convective and stratiform regions of the MCS. The sprite and its relationship to the parent discharge will similarly be discussed

Lyons, W. A.↗

Swift Follow-Up of IceCube Triggers, and Implications for the Advanced-LIGO Era

Between 2011 March and 2014 August Swift responded to 20 triggers from the IceCube neutrino observatory, observing the IceCube 50 per cent confidence error circle in X-rays, typically within 5 h of the trigger. No confirmed counterpart has been detected. We describe the Swift follow-up strategy and data analysis and present the results of the campaign. We discuss the challenges of distinguishing the X-ray counterpart to a neutrino trigger from serendipitous uncatalogued X-ray sources in the error circle, and consider the implications of our results for future strategies for multimessenger astronomy, with particular reference to the follow-up of gravitational wave triggers from the advanced-era detectors.

Evans, P. A.↗

Triggering TR in Li-ion Cells with Laser Radiation

Final Paper, not the Abstract, is attached. Johnson Space Center has been experimenting with various methods of igniting Li-ion cells into thermal runaway (TR). Recently, it was demonstrated that using a high power IR laser, an Li-ion cell can be successfully triggered into TR without perforating its can wall. This method creates a zone of highly localized heat energy that transfers through the can wall and melts nearby layers of the cell separator. Using this method, we are able to trigger various cell designs into a TR response. With unique test conditions, we've been able trigger TR in an elliptical cylindrical cell design without perforating its aluminum can. The method holds promise as an effective single cell TR trigger method in battery assemblies with minimal thermal biasing to adjacent cells.

Li-ion↗

Review of opportunities for new long-lived particle triggers in Run 3 of the Large Hadron Collider

Long-lived particles (LLPs) are highly motivated signals of physics Beyond the Standard Model (BSM) with great discovery potential and unique experimental challenges. The LLP search programme made great advances during Run 2 of the Large Hadron Collider (LHC), but many important regions of signal space remain unexplored. Dedicated triggers are crucial to improve the potential of LLP searches, and their development and expansion is necessary for the full exploitation of the new data. The public discussion of triggers has therefore been a relevant theme in the recent LLP literature, in the meetings of the LLP@LHC Community workshop and in the respective experiments. This paper documents the ideas collected during talks and discussions at these Workshops, benefiting as well from the ideas under development by the trigger community within the experimental collaborations. We summarise the theoretical motivations of various LLP scenarios leading to highly elusive signals, reviewing concrete ideas for triggers that could greatly extend the reach of the LHC experiments. We thus expect this document to encourage further thinking for both the phenomenological and experimental communities, as a stepping stone to further develop the LLP@LHC physics programme.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Efficiency of ML Anomaly Detection Triggers for Emerging Jets

Novel machine learning-based anomaly detection Level 1 (L1) triggers are currently under development at CMS, namely AXOL1TL and CICADA. The former employs a variational autoencoder, while the latter utilizes a convolutional autoencoder. These triggers aim to balance rate reduction with model independence, enabling the selection of potentially significant events that might be overlooked by traditional triggers relying on basic kinematic variable selections. Consequently, they have the potential to enhance signals indicative of physics beyond the Standard Model, such as those associated with emerging jets. Such signals are predicted by models featuring a composite dark sector where long-lived particles decay into Standard Model jets with displaced tracks and numerous vertices. This study evaluates the efficiency of these anomaly detection triggers in selecting events with emerging jets produced via the s-channel production of two dark quarks.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗