Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transition metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Synthesis of organosiloxy: Transition metal polymers

The new compound, Mo(OSiPH3)4 (where Ph is C6H5) was synthesized. An overall chemical reaction which accounts for the observed products is given by the redox approach. Results indicate that Mo(OSiPH3)4 is thermally stable up to 230 C and relatively unreactive toward most common acids and bases even at elevated temperatures. Its behavior is not unlike that of Ti(OSiPH3)4.

Marano, G. A.↗
NASA NTRS1976

Silicon solar cells from transition metal doped Czochralski and web crystals

The influence of metallic impurities on solar cell characteristics has been examined to establish the cost sensitive purity versus performance trade-offs. Solar cells were fabricated on 2 to 4 ohm-cm p-type substrates obtained by Czochralski and dendritic web growth processes. Controlled amounts of metallic impurities were introduced into the melt during growth and included Fe, Cr, Mn, Ni, Cu, Ti, V, Zr, Mg, Zn, and Al. Impurity concentrations in the crystals were determined using emission and mass spectrographic techniques and in some cases by neutron activation analysis. The solar cells were characterized by means of a computer program to curve-fit measured voltage-current data. The principal effect of the added impurities is a degradation of lifetime and diffusion length.

Davis, J. R.↗
NASA NTRS1983

CASSCF/CI calculations for first row transition metal hydrides - The TiH(4-phi), VH(5-delta), CrH(6-sigma-plus), MnH(7-sigma-plus), FeH(4,6-delta) and NiH(2-delta) states

Calculations are performed for the predicted ground states of TiH(4-phi), VH(5-delta), CrH(6-sigma-plus), MnH(7-sigma-plus), Fett(4,6-delta) and NiH(2-delta). For FeH both the 6-delta and 4-delta states are studied, since both are likely candidates for the ground state. The ground state symmetries are predicted based on a combination of atomic coupling arguments and coupling of 4s(2)3d(n) and 4s(1)3d(n+1) terms in the molecular system. Electron correlation is included by a CASSCF/CI (SD) treatment. The CASSCF includes near-degeneracy effects, while correlation of the 3d electrons in included at the CI level.

Walch, S. P.↗
NASA NTRS1986

The importance of diffuse f functions for transition metals

The importance of a diffuse f function for determining the dissociation energy (De) of Cu2 and the 3F-3D energy separation in Ni atom is investigated. It is found that the diffuse f contributes at most 0.05 eV to the De of Cu2 when added to a basis containing tight f functions and a flexibly contracted d basis. The diffuse f function is found to decrease the 3F-3D separation in Ni, but by substantially less than the tight f functions.

Langhoff, S. R.↗
NASA NTRS1985

Damping and modulus measurements in B2 transition metal aluminides

The polycrystalline intermetallic alloys FeAl (50.9 to 58.2 percent Fe), NiAl (49.2 to 55.9 percent Ni) and CoAl (48.5 to 52.3 percent Co) have the B2 structure and are of interest for high temperature applications. The PUCOT (piezoelectric ultrasonic composite oscillator technique) has been used to measure mechanical damping or internal friction and Young's modulus has been used as a function of temperature and composition for these materials. The modulus data for six CoAl alloys at temperatures up to 1300 K are presented. Examples are given of the strain amplitude dependence of internal friction for four CoAl alloys. The curves showed the break away phenomenon and are interpreted in terms of a theory dealing with the pinning of dislocation lines and their eventual break away at large strain amplitudes. The dislocation density was calculated to be about 10 to the 8th per sq m. For all the compositions (X1) of CoAl studied, a single equation could be fitted to the data.

Harmouche, M. R.↗
NASA NTRS1987

On nd bonding in the transition metal trimers: Comparison of Sc3 and Y3

CASSCF/CCI calculations are presented for the low-lying states of Y3. Comparison of the wave functions for Y3 and Sc3 indicates substantial 4d-5p hybridization in Y3, but little 3d-4p hybridization in Sc3. The increased 4d-5p hybridization leads to stabilization of 4dpi bonding with respect to 4dsigma bonding for equilateral triangle Y3, and also leads to 4d-5p bonding for linear geometries. These effects lead to a different ordering of states for equilateral triangle geometries and a smaller excitation energy to the linear configuration for Y3 as compared to Sc3.

Walch, Stephen P.↗
NASA NTRS1986

OH-transition metal bonding

The bonding in both CuOH and AgOH has a covalent component that leads to a bent structure. The larger electrostatic stabilization in CuOH leads to a larger D(e) (2.83 eV) compared with AgOH (2.20 eV). Using Ni5OH to model chemisorption of OH on a Ni surface, it is found that OH adsorption in the fourfold hollow of Ni(100) leads to an OH normal to the surface, while adsorption directly above a Ni atom leads to a tilted OH. These qualitative Ni5OH calculations allow for speculation on the observed variation of OH on metal surfaces.

Bauschlicher, Charles W., Jr.↗
NASA NTRS1991

Rapid solidification of polymorphic transition metals induced by nanosecond laser pulses

An Nd-YAG laser giving 5 ns, 266 nm pulses was used to melt and subsequently quench thin, pure metallic films on a liquid Al/Al2O3 substrate at 10 to the 10th - 10 to the 12th K/s. Transmission electron microscopy together with electron diffraction was used to study the competitive nucleation and growth behavior of the crystals from the undercooled melt. In the case of Fe and Co, the high-temperature bcc and fcc structures were retained after laser quenching. Ti and Zr in spite of the structural similarities exhibit different preferences for nucleation from the undercooled melt. In all the metals the solid-state transformations were completely suppressed and the crystal growth was found to be limited by the collisional frequency of the atoms onto the growing interface.

Vitta, Satish↗
NASA NTRS1994

Supported transition metal catalysts for para- to ortho-hydrogen conversion

The main goal of this study was to develop and improve on existing catalysts for the conversion of ortho- to para-hydrogen. Starting with a commercially available Air Products nickel silicate, which had a beta value of 20, we were trying to synthesize catalysts that would be an improvement to AP. This was accomplished by preparing silicates with various metals as well as different preparation methods. We also prepared supported ruthenium catalysts by various techniques using several metal precursors to improve present technology. What was also found was that the activation conditions prior to catalytic testing was highly important for both the silicates and the supported ruthenium catalysts. While not the initial focus of the research, we made some interesting observations into the adsorption of H2 on ruthenium. This helped us to get a better understanding of how ortho- to para-H2 conversion takes place, and what features in a catalyst are important to optimize activity. Reactor design was the final area in which some interesting conclusions were drawn. As discussed earlier, the reactor catalyst bed must be constructed using straight 1/8 feet OD stainless steel tubing. It was determined that the use of 1/4 feet OD tubing caused two problems. First, the radius from the center of the bed to the wall was too great for thermal equilibrium. Since the reaction of ortho- to para-H2 is exothermic, the catalyst bed center was warmer than the edges. Second, the catalyst bed was too shallow using a 1/4 feet tube. This caused reactant blow-by which was thought to decrease the measured activity when the flow rate was increased. The 1/8 feet tube corrected both of these concerns.

Brooks, Christopher J.↗
NASA NTRS2003

Novel Route to Transition Metal Isothiocyanate Complexes Using Metal Powders and Thiourea

A new synthetic route to isothiocyanate-containing materials is presented. Eight isothiocyanate- 4-methylpyridine (y-picoline) compounds were prepared by refluxing metal powders (Mn, Fe, Co, Ni, and Cu) with thiourea in y-picoline. With the exception of compound 5,prepared with Co, the isothiocyanate ligand was generated in situ by the isomerization of thiourea to NH4+SCN- at reflux temperatures. The complexes were characterized by x-ray crystallography. Compounds 1,2, and 8 are the first isothiocyanate- 4-methylpyridine anionic compounds ever prepared and structurally characterized. Compounds 1 and 2 are isostructural with four equatorially bound isothiocyanate ligands and two axially bound y-picoline molecules. Compound 8 is a five-coordinate copper(II) molecule with a distorted square-pyramidal geometry. Coordinated picoline and two isothiocyanates form the basal plane and the remaining isothiocyanate is bound at the apex. Structural data are presented for all compounds.

Harris, Jerry D.↗
NASA NTRS2003

Difference in Icosahedral Short-Range Order in Early and Late Transition Metals Liquids

New short-range order data are presented for equilibrium and undercooled liquids of Ti and Ni. These were obtained from in-situ synchrotron x-ray diffraction measurements of electrostatically-levitated droplets. While the short-range order of liquid Ni is icosahedral, consistent with Frank's hypothesis, significantly distorted icosahedral order is observed in liquid Ti. This is the first experimental observation of distorted icosahedral short-range order in any liquid, although this has been predicted by theoretical studies on atomic clusters.

Lee, G. W.↗