SEARCH · Engineering Papers

Results for “Transfer Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Influence of oscillation-induced diffusion on heat transfer in a uniformly heated channel

An analysis of the effect of flow oscillations on laminar flow heat transfer in a channel with uniform heat addition is presented. It is shown that the effect of flow oscillations will be to reduce the channel heat transfer coefficient. This effect is due to the fact that the heat addition along the channel wall produces an increasing fluid temperature along the channel length. The flow oscillations interacting with this positive temperature gradient will induce a heat flow back toward the channel inlet. This will tend to inhibit the heat transfer process and will raise the wall temperature required to transfer away a given amount of heat at the channel wall.

Siegel, R.↗

NASA NTRS1990

Evaluation of water cooled supersonic temperature and pressure probes for application to 2000 F flows

The development of water cooled supersonic probes used to study high temperature jet plumes is addressed. These probes are: total pressure, static pressure, and total temperature. The motivation for these experiments is the determination of high temperature supersonic jet mean flow properties. A 3.54 inch exit diameter water cooled nozzle was used in the tests. It is designed for exit Mach 2 at 2000 F exit total temperature. Tests were conducted using water cooled probes capable of operating in Mach 2 flow, up to 2000 F total temperature. Of the two designs tested, an annular cooling method was chosen as superior. Data at the jet exit planes, and along the jet centerline, were obtained for total temperatures of 900 F, 1500 F, and 2000 F, for each of the probes. The data obtained from the total and static pressure probes are consistent with prior low temperature results. However, the data obtained from the total temperature probe was affected by the water coolant. The total temperature probe was tested up to 2000 F with, and without, the cooling system turned on to better understand the heat transfer process at the thermocouple bead. The rate of heat transfer across the thermocouple bead was greater when the coolant was turned on than when the coolant was turned off. This accounted for the lower temperature measurement by the cooled probe. The velocity and Mach number at the exit plane and centerline locations were determined from the Rayleigh-Pitot tube formula.

Lagen, Nicholas T.↗

NASA NTRS1989

Interaction of surface radiation with convection in crystal growth by physical vapor transport

Growth of single crystals from vapor in closed ampoules is governed by an intricate interplay between mass, momentum and heat transfer processes. The objective of this study is to examine and isolate the effects of surface radiation heat transfer on the vapor transport process using a mathematical model. The model consists of a set of coupled nonlinear partial differential equations for conservation of mass, momentum, energy and species, and the integrodifferential equations which represent radiative exchange. It depends on five important physical parameters. These are Grashof number, Prandtl number, Schmidt number, aspect ratio and the radiation-conduction number. The effects of these dimensionless groupings are systematically investigated. From the cases examined, it is concluded that surface radiation can change the flow structure appreciably. This is especially true in microgravity environment where radiation competes primarily with conduction in modifying the thermal profiles. The numerical results also show that in the presence of radiation, the top heating configuration (source on top) is no longer stable and that near the growing crystal, radiation-induced vortices can introduce significant nonuniformities in the growth flux.

Kassemi, Mohammad↗

NASA NTRS1978

Manufacturing process applications team (MATeam)

Activities of the manufacturing applications team (MATeam) in effecting widespread transfer of NASA technology to aid in the solution of manufacturing problems in the industrial sector are described. During the program's first year of operation, 450 companies, industry associations, and government agencies were contacted, 150 manufacturing problems were documented, and 20 potential technology transfers were identified. Although none of the technology transfers has been commercialized and put in use, several are in the applications engineering phase, and others are in the early stages of implementation. The technology transfer process is described and guidelines used for the preparation of problems statements are included.

Bangs, E. R.↗

NASA NTRS2003

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud-Resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution on the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes, and with surface processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulate squall lines that developed in the western Pacific, South China Sea, eastern Atlantic, South America and central U.S. For the cloud ensemble, the GCE model was integrated for several days in order to have good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolution will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1- to 5-kilometers) and vertical resolutions (from 20- to 200-meters in the lower troposphere to 200- to 500-m in the middle and upper troposphere). Sensitivity tests using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The PBL and diurnal variation of precipitation processes will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kao↗

NASA NTRS2003

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud-resolving Model

Tao, Wei-Kuo↗

NASA NTRS2003

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud-Resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution on the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes, and with surface processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulate squall lines that developed in the western Pacific, eastern Atlantic and central US. For the cloud ensemble, the GCE model was integrated for several days in order to have good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolution will be examined.

Tao, Wei-Kuo↗

NASA NTRS2003

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud Resolving Model

The Goddard Cumulus Ensemble (GCE) model examines the impact of various microphysical schemes, and vertical and horizontal resolution in the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing rations of all water phases (vapor, liquid and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes and with surface processes. For idealized hurricanes, an axisymmetric version of the GCE model was developed and used to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was use to simulate squall lines that developed in the western Pacific, South China Sea, eastern Atlantic, South America and central U.S. FOr the cloud ensemble, the GCE model was integrated for several days in order to have a good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolutio will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1-to 5-km) and vertical resolutions (from 20- to 200-m in the lower troposphere to 200- to 500m in the middle and upper troposphere). Sensitivity test using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The thermodynamic and water budget associated with various types of precipitation systems will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kuo↗

NASA NTRS2003

Sensitivity of Precipitation Processes of Microphysics and Resolution in a Cloud-Resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution ion the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble f clouds. The model variables include horizontal and vertical velocities, potential temperatures, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes, and with surface processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulated squall lines that developed in the western Pacific, eastern Atlantic and central US. For the cloud ensemble, the GCE model was integrated for several days in order to have good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolution will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1- to 5-km) and vertical resolutions (from 20- to 200-m in the lower troposphere to 200- to 500-m in the middle and upper troposphere). Sensitivity tests using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The thermodynamic and water budget associated with various types of precipitation systems will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kuo↗

NASA NTRS2006

Transferring Technology to Industry

This slide presentation reviews the technology transfer processes in which JPL has been involved to assist in transferring the technology derived from aerospace research and development to industry. California Institute of Technology (CalTech), the organization that runs JPL, is the leading institute in patents for all U.S. universities. There are several mechanisms that are available to JPL to inform industry of these technological advances: (1) a dedicated organization at JPL, National Space Technology Applications (NSTA), (2) Tech Brief Magazine, (3) Spinoff magazine, and (4) JPL publications. There have also been many start-up organizations and businesses from CalTech.

Industry Day↗

NASA NTRSDate not supplied

Numerical Simulation of No-Vent Chill and Fill of a Large Liquid Hydrogen Tank

To enable the design of future in-space cryogenic propellant transfer vehicles, high accuracy models of the cryogenic propellant transfer process are desired. For in-space refueling applications, accurate simulations are desired of the propellant tank chilldown and no-vent fill (NVF) process in order to estimate the amount of propellant required, to determine the maximum sustainable flow rate to fill the tank, and to establish a timeline for the filling process. NVF is a complex process that involves numerous two-phase heat and mass transfer phenomena, such as boiling at the wall and evaporation and condensation at the liquid/vapor interface. In recent years, progress has been made in developing a numerical modeling technique using the Generalized Fluid System Simulation Program (GFSSP) that has been validated against several small-scale liquid nitrogen NVF tests. This paper presents GFSSP numerical model validation against three liquid hydrogen NVF tests on a large-scale propellant tank. Comparing the GFSSP model to the data for pressure, fill level, and wall temperature, the mean absolute percentage error is below 20% across the range of simulated conditions, indicating very good predictive agreement for this large-scale hydrogen NVF test series.

Alok Majumdar↗

NASA NTRSDate not supplied

Numerical Simulation of No-Vent Chill and Fill of a Large Liquid Hydrogen Tank

Alok Majumdar↗

NASA NTRS1993

Technology utilization office data base analysis and design

NASA Headquarters is placing a high priority on the transfer of NASA and NASA contractor developed technologies and expertise to the private sector and to other federal, state and local government organizations. The ultimate objective of these efforts is positive economic impact, an improved quality of life, and a more competitive U.S. posture in international markets. The Technology Utilization Office (TUO) currently serves seven states with its technology transfer efforts. Since 1989, the TUO has handled over one-thousand formal requests for NASA related technologies assistance. The technology transfer process requires promoting public awareness of NASA related soliciting requests for assistance, matching technologies to specific needs, assuring appropriate technology transfer, and monitoring and evaluating the process. Each of these activities have one very important aspect in common: the success of each is dissemination of appropriate high quality information. The purpose of the research was to establish the requirements and develop a preliminary design for a database system to increase the effectiveness and efficiency of the TUO's technology transfer function. The research was conducted following the traditional systems development life cycle methodology and was supported through the use of modern structured analysis techniques. The next section will describe the research and findings as conducted under the life cycle approach.

Floyd, Stephen A.↗

NASA NTRS1994

An applications-oriented approach to the development of virtual environments

The field of Virtual Reality (VR) is diverse, ranging in scope from research into fundamental enabling technologies to the building of full-scale entertainment facilities. However, the concept of virtual reality means many things to many people. Ideally, a definition of VR should derive from how it can provide solutions to existing challenges in building advanced human computer interfaces. The measure of success for VR lies in its ability to enhance the assimilation of complex information, whether to aid in difficult decision making processes, or to recreate real experiences in a compelling way. This philosophy is described using an example from a VR-based advertising project. The common and unique elements of this example are explained, though the fundamental development process is the same for all virtual environments that support information transfer. In short, this development approach is an applications oriented approach that begins by establishing and prioritizing user requirements and seeks to add value to the information transfer process through the appropriate use of VR technology.

Crowe, Michael X.↗

NASA NTRS2012

KSC Tech Transfer News, Volume 5, No. 1

In October 2011, the White House released a presidential memorandum titled "Accelerating Technology Transfer and Commercialization of Federal Research in Support of High-Growth Businesses." It emphasized the importance of technology transfer as a driver of successful innovation to fuel economic growth, create jobs, and make U.S. industries more competitive in a global market. In response to this memorandum, NASA developed a 5-year plan for accelerating its own technology transfer activities. This plan outlines key objectives for enhancing NASA's ability to increase the rate, volume, and quality of technology transfers to industry, academia, and other Government agencies. By doing so, we are increasing the economic impact and public benefit of Federal technology investments. In addition, NASA established technology transfer as a key element of one of its Agency High Priority Performance Goals: "Enable bold new missions and make new technologies available to Government agencies and U.S. industry."What does this mean to you? In the broadest sense, NASA defines technology transfer as the utilization of NASA's technological assets- technologies, innovations, unique facilities and equipment, and technical expertise- by public and private sectors to benefit the Nation. So, if your job involves developing new technologies, writing new software, creating innovative ways to do business, performing research, or developing new technical capabilities, you could be contributing to Kennedy Space Center's (KSC) technology transfer activities by creating the technological assets that may one day be used by external partners. Furthermore, anytime you provide technical expertise to external partners, you're participating in technology transfer. The single most important step you can take to support the technology transfer process is to report new technologies and innovations ro the Technology Transfer Office. This is the critical first step in fueling the technology transfer pipeline. This is also a requirement for all Federal employees (see NPD 2091.1 B) and most NASA contractors. Detailed information on when, where, and how ro report new technology is provided on the following page. In addition, it's important that all detailed-oriented discussions about technology between NASA and external partners are documented or that they occur under formal agreements such as Space Act Agreements and Nondisclosure Agreements. Our office can assist you in putting these agreements into place, protecting NASA's interests, and providing the means to accurately measure the Agency's technology transfer activities. Technology transfer is everyone's responsibility. We need your help to ensure that NASA remains the leader in Federal technology transfer, and that the great work done at KSC provides the maximum economic and societal benefit to the Nation.

Buckingham, Bruce↗

NASA NTRS1964

Liquid-metal corrosion as a solution phenome- non

Liquid metal corrosion as dissolution phenomenon - mass transfer processes

CORROSION↗

NASA NTRS1987

Local structure of intercomponent energy transfer in homogeneous turbulent shear flow

Intercomponent energy transfer by pressure-strain-rate was investigated for homogeneous turbulent shear flow. The rapid and slow parts of turbulent pressure (decomposed according to the influence of the mean deformation rate) are found to be uncorrelated; this finding provides strong justification for current modeling procedure in which the pressure-strain-rate term is split into the corresponding parts. Issues pertinent to scales involved in the intercomponent energy transfer are addressed in comparison with those for the Reynolds-stress and vorticity fields. A physical picture of the energy transfer process is described from a detailed study of instantaneous events of high transfer regions. It was found that the most significant intercomponent energy transfer events are highly localized in space and are imbedded within a region of concentrated vorticity.

Brasseur, James G.↗

NASA NTRS1990

The COLD-SAT Experiment for Cryogenic Fluid Management Technology

Future national space transportation missions will depend on the use of cryogenic fluid management technology development needs for these missions. In-space testing will be conducted in order to show low gravity cryogenic fluid management concepts and to acquire a technical data base. Liquid H2 is the preferred test fluid due to its propellant use. The design of COLD-SAT (Cryogenic On-orbit Liquid Depot Storage, Acquisition, and Transfer Satellite), an Expendable Launch Vehicle (ELV) launched orbital spacecraft that will perform subcritical liquid H2 storage and transfer experiments under low gravity conditions is studied. An Atlas launch vehicle will place COLD-SAT into a circular orbit, and the 3-axis controlled spacecraft bus will provide electric power, experiment control, and data management, attitude control, and propulsive accelerations for the experiments. Low levels of acceleration will provide data on the effects that low gravity might have on the heat and mass transfer processes used. The experiment module will contain 3 liquid H2 tanks; fluid transfer, pressurization and venting equipment; and instrumentation.

Schuster, J. R.↗