Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Detection of soil erosion within pinyon-juniper woodlands using Thematic Mapper (TM) data

Multispectral measurements collected by Landsat Thematic Mapper (TM) were correlated with field measurements, direct soil loss estimates, and Universal Soil Loss Equation (USLE) estimates to determine the sensitivity of TM data to varying degrees of soil erosion in pinyon-juniper woodland in central Utah. TM data were also evaluated as a predictor of the USLE Crop Management C factor for pinyon-juniper woodlands. TM spectral data were consistently better predictors of soil erosion factors than any combination of field factors. TM data were more sensitive to vegetation variations than the USLE C factor. USLE estimates showed low annual rates of erosion which varied little among the study sites. Direct measurements of rate of soil loss using the SEDIMENT (Soil Erosion DIrect measureMENT) technique, indicated high and varying rates of soil loss among the sites since tree establishment. Erosion estimates from the USLE and SEDIMENT methods suggest that erosion rates have been severe in the past, but because significant amounts of soil have already been eroded, and the surface is now armored by rock debris, present erosion rates are lower. Indicators of accelerated erosion were still present on all sites, however, suggesting that the USLE underestimated erosion within the study area.

Price, Kevin P.↗
NASA NTRS1993

Predicting LANDSAT MSS endmember signatures from corresponding higher resolution TM fraction images

The approach to predicting Landsat Multispectral Scanner System (MSS) endmember signatures from fraction images derived from high resolution Landsat Thematic Mapper (TM) data is presented. The purpose, conducted in the Mogi-Guacu study site located in Sao Paulo State, Brazil, was to determine if information derived from a mixture model applied to higher resolution TM data could serve as ground truth for the lower resolution MSS sensor. The Constrained Least Squares (CLS) method was used to generate vegetation, soil, and shade fraction images from the TM data. The resulting images were then used to estimate the endmember spectral response for MSS data by regressing each MSS spectral channel against the corresponding proportion values estimated for the same resolution cells from the TM mixture model. The evaluation of the predicted signatures was performed by comparing the corresponding fraction images derived from both the MSS and TM data acquired on 14 Sep. 1986. The techniques serves as a potential tool for integrating information in global studies where remote sensors with different spectral and spatial resolutions were used.

Shimabukuro, Yosio E.↗
NASA NTRS1993

The Castor 120 (TM) Motor: Development and Qualification Testing Results

This paper discusses Thiokol Corporation's static test results for the development and qualification program of the Castor 120(TM) motor. The demonstration program began with a 25,000-pound motor to demonstrate the new technologies and processes that would be used on the larger Castor 120(TM) motor. The Castor 120(TM) motor was designed to be applicable as a first stage, second stage, or strap-on motor. Static test results from the Castor 25 and two Castor 120(TM) motors are discussed in this paper. The results verified the feasibility of tailoring the propellant grain configuration and nozzle throat diameter to meet various customer requirements. The first and second motors were conditioned successfully at ambient temperature and 28 F, respectively, to demonstrate that the design could handle a wide range of environmental launch conditions. Furthermore, the second Castor 120(TM) motor demonstrated a systems tunnel and forward skirt extension to verify flight-ready stage hardware. It is anticipated that the first flight motor will be ready by the fall of 1994.

Jack G Hilden↗
NASA NTRS2004

DAG-TM Concept Element 11 CNS Performance Assessment: ADS-B Performance in the TRACON

Distributed Air/Ground (DAG) Traffic Management (TM) is an integrated operational concept in which flight deck crews, air traffic service providers and aeronautical operational control personnel use distributed decision-making to enable user preferences and increase system capacity, while meeting air traffic management (ATM) safety requirements. It is a possible operational mode under the Free Flight concept outlined by the RTCA Task Force 3. The goal of DAG-TM is to enhance user flexibility/efficiency and increase system capacity, without adversely affecting system safety or restricting user accessibility to the National Airspace System (NAS). DAG-TM will be accomplished with a human-centered operational paradigm enabled by procedural and technological innovations. These innovations include automation aids, information sharing and Communication, Navigation, and Surveillance (CNS) / ATM technologies. The DAG-TM concept is intended to eliminate static restrictions to the maximum extent possible. In this paradigm, users may plan and operate according to their preferences - as the rule rather than the exception - with deviations occurring only as necessary. The DAG-TM concept elements aim to mitigate the extent and impact of dynamic NAS constraints, while maximizing the flexibility of airspace operations

Raghavan, Rajesh S.↗
DOE OSTI2020

Materials Data on Tm(MnGe)2 by Materials Project

Tm(MnGe)2 crystallizes in the tetragonal I4/mmm space group. The structure is three-dimensional. Tm is bonded in a 8-coordinate geometry to eight equivalent Ge atoms. All Tm–Ge bond lengths are 3.04 Å. Mn is bonded to four equivalent Ge atoms to form a mixture of corner and edge-sharing MnGe4 tetrahedra. All Mn–Ge bond lengths are 2.42 Å. Ge is bonded in a 9-coordinate geometry to four equivalent Tm, four equivalent Mn, and one Ge atom. The Ge–Ge bond length is 2.55 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Tm(MnSn)6 by Materials Project

TmMn6Sn6 crystallizes in the hexagonal P6/mmm space group. The structure is three-dimensional. Tm is bonded to eight Sn atoms to form distorted edge-sharing TmSn8 hexagonal bipyramids. There are two shorter (2.99 Å) and six longer (3.14 Å) Tm–Sn bond lengths. Mn is bonded in a 12-coordinate geometry to six Sn atoms. There are a spread of Mn–Sn bond distances ranging from 2.73–2.82 Å. There are three inequivalent Sn sites. In the first Sn site, Sn is bonded in a 6-coordinate geometry to six equivalent Mn atoms. In the second Sn site, Sn is bonded in a 8-coordinate geometry to one Tm, six equivalent Mn, and one Sn atom. The Sn–Sn bond length is 3.01 Å. In the third Sn site, Sn is bonded in a 12-coordinate geometry to three equivalent Tm and six equivalent Mn atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Tm(CuS)2 by Materials Project

Tm(CuS)2 crystallizes in the trigonal P-3m1 space group. The structure is three-dimensional. Tm is bonded to six equivalent S atoms to form distorted edge-sharing TmS6 octahedra. All Tm–S bond lengths are 2.80 Å. Cu is bonded in a 4-coordinate geometry to four equivalent S atoms. There are three shorter (2.32 Å) and one longer (2.51 Å) Cu–S bond lengths. S is bonded in a 7-coordinate geometry to three equivalent Tm and four equivalent Cu atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Tm(Ni2As)2 by Materials Project

Tm(Ni2As)2 crystallizes in the tetragonal P4_2/mnm space group. The structure is three-dimensional. Tm is bonded to six equivalent As atoms to form a mixture of distorted edge and corner-sharing TmAs6 octahedra. The corner-sharing octahedral tilt angles are 41°. There are two shorter (2.88 Å) and four longer (2.90 Å) Tm–As bond lengths. Ni is bonded in a 3-coordinate geometry to three equivalent As atoms. All Ni–As bond lengths are 2.39 Å. As is bonded in a 9-coordinate geometry to three equivalent Tm and six equivalent Ni atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Optical coherence and energy-level properties of a Tm 3+ -doped LiNbO 3 waveguide at subKelvin temperatures

We characterize the optical coherence and energy-level properties of the 795-nm 3 H 6 to 3 H 4 transition of Tm 3+ in a Ti 4+ :LiNbO 3 waveguide at temperatures as low as 0.65 K. Coherence properties are measured with varied temperature, magnetic field, optical excitation power and wavelength, and measurement timescale. We also investigate nuclear spin-induced hyperfine structure and population dynamics with varying magnetic field and laser excitation power. Except for accountable differences due to different Ti 4+ - and Tm 3+ -doping concentrations, we find that the properties of Tm 3+ :Ti 4+ :LiNbO 3 produced by indiffusion doping are consistent with those of a bulk-doped Tm 3+ :LiNbO 3 crystal measured under similar conditions. Furthermore, our results, which complement previous work in a narrower parameter space, support using rare-earth ions for integrated optical and quantum signal processing.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1982

Landsat-D TM application to porphyry copper exploration

For a number of years Landsat data have been used to locate areas of iron oxide occurrences which might be associated with hydrothermal alteration zones. However, the usefulness of the Landsat data was restricted because of certain limitations of the spectral information provided by Landsat. A new generation multispectral scanner will, therefore, be carried by the fourth Landsat, which is to be launched in July, 1982. This instrument, called the Thematic Mapper (TM), will have seven channels and provide data with 30 m spatial resolution. Two of the spectral channels (1.6 micron and 2.2 micron) should allow detection of hydrous minerals. Possible applications of Landsat-D TM data for copper exploration were studied on the basis of a comparison of Landsat data with simulated TM data acquired using an aircraft scanner instrument. Three porphyr copper deposits in Arizona were selected for the study. It is concluded that the new Landsat-D TM scanner will provide Exploration geologists with a new improved tool for surveying mineral resources on a global basis.

Abrams, M.↗
NASA NTRS1984

Relative radiometric calibration of LANDSAT TM reflective bands

Raw thematic mapper (TM) calibration data from pre-launch tests and in-orbit acquisitions from LANDSAT 4 and 5 satellites are analyzed to assess the radiometric characteristics of the TM sensor. A software program called TM radiometric and algorithmic performance program (TRAPP) was used for the majority of analyses. Radiometric uncertainty in the final TM image originates from: (1) scene variability (solar irradiance and atmospheric scattering); (2) optical and electrical variability of the sensor; and (3) variability introduced during image processing.

Barker, J. L.↗
NASA NTRS1984

A physically-based transformation of Thematic Mapper data The TM tasseled cap

In an extension of previous simulation studies, a transformation of actual TM data in the six reflective bands is described which achieves three objectives: a fundamental view of TM data structures is presented, the vast majority of data variability is concentrated in a few (three) features, and the defined features can be directly associated with physical scene characteristics. The underlying TM data structure, based on three TM scenes as well as simulated data, is described, as are the general spectral characteristics of agricultural crops and other scene classes in the transformed data space.

Crist, E. P.↗
NASA NTRS1985

Evaluation of the Radiometric Quality of the TM Data Using Clustering, Linear Transformations and Multispectral Distance Measures

The radiometric quality of LANDSAT 4 TM data for the classification and identification of Earth surface features was evaluated. Techniques employed in the evaluation included clustering, data compression (linear transformations), multispectral distance measures, and hierarchical classification methods. TM and MSS data for the Chicago, Illinois test site were studied. In order to determine the radiometric quality of the TM thermal data for temperature mapping of surface water, a test site was selected within the area covered by the TM scene (Scene ID: 40101-16025) gathered over Illinois. This site was chosen because it includes a surface water body with a large range of temperatures, i.e., a cooling pond for the Dresden nuclear power plant and the junction of two rivers.

Bartolucci, L. A.↗
NASA NTRS1985

Investigation of TM Band-to-band Registration Using the JSC Registration Processor

When the Thematic Mapper (TM) imagery was first received and displayed in the fall of 1982, its radiometric lucidity and geometric fidelity was judged far superior to the multispectral scanner (MSS) imagery. The MSS data from the LANDSAT series of satellites have served well as the mainstay of satellite imagery for the remote sensing community up to now. Therefore, there is great anticipation as to the utility of this new IM imagery to advance the field of remote sensing. The thematic mapper (TM) band to band registration accuracy evaluation was discussed. In particular, the band to band registration accuracies of the TM data in the subpixel region were evaluated using the Johnson Space Center (JSC) registration processor which is ideally suited for this task. The JSC registration processor was also used to register one acquisition to another acquisition of multitemporal TM data acquired over the same ground track. The approach and the rationale behind the task, the description of the data set, the evaluation results, and the preliminary conclusions are discussed.

Yao, S. S.↗
NASA NTRS1985

Overview of TM Applications Research Reports

Applications-oriented users of TM data have every reason to be excited about the possibility of opening up other horizons using TM data. The data appear to be of excellent quality, and the investigations conducted to date, although preliminary, substantiate the findings of earlier research conducted with simulated TM data. Techniques used for sensor/data quality evaluation; data processing, analysis, and display; and comparisons of TM versus MSS data are summarized.

Williams, D. L.↗
NASA NTRS1985

Geologic Utility of LANSDAT-4 TM Data

The performance of the TM vis-a-vis various geological applications was quantified by analyzing: (1) the geological utility of the data with respect to the increased spatial resolution and number of bands (compared to the MSS); (2) the geometric accuracy; (3) the radiometric performance of the TM scanner. Preliminary analyses were performed on TM scenes: over Death Valley, California, and over southern Arizona. Both scenes were acquired in CCT-PT format, where the data were geometrically and radiometrically corrected. Overall, the TM data appears to contain a marked increase in geologically useful information; however, a number of instrumental or processing artifacts may well limit the ability of the geologist to fully extract this information.

Abrams, M.↗
NASA NTRS1985

Relative Accuracy Assessment of LANDSAT-4 MSS and TM Data for Level 1 Land Cover Inventory

Digital data for the Washington, DC scene simultaneously acquired by the LANDSAT-4 Multispectral Scanner (MSS) and the LANDSAT-4 thematic mapper (TM) was compared. Classification success for the TM and MSS data sets was determined by a per pixel comparison with digitized ground verification data (GVD). These GVD were comprised of Level 7 land cover (developed, agriculture, forest, water, wetlands, and barren) for four USGS 7.5 minute topographic quadrangle maps. The relative improvement in classification success for TM was between 11% and 14%, or about a factor of 1.3, for these data. This represents a meaningful improvement in accuracy for Level 7 land cover categorization for TM relative to MSS, particularly when errors of omission and commission were considered.

Middleton, E. M.↗
NASA NTRS1985

A comparison of LANDSAT TM to MSS imagery for detecting submerged aquatic vegetation in lower Chesapeake Bay

LANDSAT Thematic Mapper (TM) and Multispectral Scanner (MSS) imagery generated simultaneously over Guinea Marsh, Virginia, are assessed in the ability to detect submerged aquatic, bottom-adhering plant canopies (SAV). An unsupervised clustering algorithm is applied to both image types and the resulting classifications compared to SAV distributions derived from color aerial photography. Class confidence and accuracy are first computed for all water areas and then only shallow areas where water depth is less than 6 feet. In both the TM and MSS imagery, masking water areas deeper than 6 ft. resulted in greater classification accuracy at confidence levels greater than 50%. Both systems perform poorly in detecting SAV with crown cover densities less than 70%. On the basis of the spectral resolution, radiometric sensitivity, and location of visible bands, TM imagery does not offer a significant advantage over MSS data for detecting SAV in Lower Chesapeake Bay. However, because the TM imagery represents a higher spatial resolution, smaller SAV canopies may be detected than is possible with MSS data.

Ackleson, S. G.↗