Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermodynamic limit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Catalytic hydrogenation of HMF to BHMF over copper catalysts

2,5-Bis(hydroxymethyl)furan (BHMF) is a bio-derived building block for polyester production, obtained via the hydrogenation of 5-hydroxymethylfurfural (HMF). First-principles thermodynamic equilibrium calculations indicate that this reaction is not thermodynamically limited under relevant conditions (e.g., 100 °C and high H 2 partial pressure). In this work, crude HMF was employed as the feedstock for BHMF synthesis. Initially, acidic impurities and humins were removed from unrefined HMF through filtration using a packed bed of γ-alumina. A comprehensive study of the filtration process is presented, including filtration kinetics, breakthrough curve analysis, and mathematical modeling. The purified HMF was subsequently hydrogenated over a 10 wt% CuZrO 2 catalyst, using ethanol as the reaction solvent. Batch reactions were first performed for collection of kinetic data to guide the transition to continuous flow operation. Kinetic data was collected in a fixed bed reactor at varying contact time, time on stream, temperature, and HMF concentration. This data was used to develop a kinetic model for HMF hydrogenation. Maximum BHMF production rates were achieved at 130 °C, accompanied by minor formation of byproducts from BHMF ring-opening reactions. The BHMF selectivity was 100 % at 100 °C although with lower reaction rates. Furthermore, catalyst stability tests revealed a loss of up to 50 % in catalytic activity within the first 24 h, likely due to the adsorption of HMF-derived oligomers that are not easily removed by filtration.

Crude HMF filtration↗
DOE OSTI2026

Hydrogen uptake in graphite matrix at high temperature

Tritium management is a critical challenge for the next generation of nuclear reactors, such as Fluoride Salt Cooled High Temperature Reactors (FHRs) and High Temperature Gas-cooled Reactors (HTGRs), due to the higher production rate (up to 10,000 times) than conventional Light Water Reactors (LWRs). Graphitic materials employed as moderator, reflector, and fuel pebbles offer a potential pathway for tritium recovery by serving as a sink for tritium. Prediction of uptake capacity under reactor relevant conditions remains a challenge due to a lack of low partial pressure data and significant inter-grade variability of graphite. This study addresses these gaps by providing a comprehensive characterization of hydrogen (as a tritium surrogate) uptake and release behavior in the A3-3 graphite matrix (GM) used in fuel pebbles. Uptake measurements are performed at reactor relevant temperatures of 600- 800 °C, 1-200 Torr hydrogen pressure, and 15-120 min equilibration time, followed by thermal desorption spectroscopy up to 1100 °C. Uptake experiments at different equilibration times demonstrate the role of kinetics in hydrogen uptake, which can be modeled as a diffusion-with-trapping process. In the thermodynamics limit, the Sips adsorption model is shown to capture the uptake in A3-3 GM well. Our campaign provides a set of new results for hydrogen uptake in A3-3, including limiting uptake capacity at 600 °C, apparent diffusion coefficient at 600 °C, and the first estimates of the FHR/HTGR relevant (600 °C, 20 Pa partial pressure) equilibrium uptake capacity and time to saturation. Desorption data highlights a new site for hydrogen uptake, not observed in nuclear graphite, which we attribute to the non-graphitized binder. Using the Kissinger method, we estimate activation energy for release from the desorption peaks, confirming the activation energy for release from the basal planes and providing the first estimate for the activation energy of release from the binder.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Intensified reactive extraction for the acid-catalyzed conversion of fructose to 5-hydroxymethyl furfural

Here we conduct an experimental study of fructose dehydration to 5-hydroxymethyl furfural (HMF) in a biphasic microreactor as a function of residence time, temperature, and sugar loading using methyl butyl iso-ketone (MIBK) and 2-pentanol as extracting solvents. We demonstrate stable operation with maximum HMF yields of 93% and 87% in the two solvents, respectively, at 200 °C and a residence time of 2 s for a 5 wt% fructose aqueous feed. We report the highest optimal HMF space–time yield of 60 kg/L-hr at 200 °C (10 – 2,500-fold higher than published reports). Unexpectedly, an optimum organic-to-water ratio exists that depends on the solvent. Notably, we observe experimentally an increased fructose rate and HMF yield well above the extraction thermodynamic limit and hypothesize that the solvent plays a dual role, that of an extractant to protect HMF from degradation and a modifier of the fundamental chemistry. We expose mass transfer limitations of microreactors at longer residence times and higher temperatures and provide reactivity maps for their design. We show that batch reactors are unfit for high throughput and distributed manufacturing where small, farm-based systems are necessary.

42 ENGINEERING↗
DOE OSTI2022

An experimental and modeling study of the application of membrane contactor reactors to methanol synthesis using pure CO 2 feeds

We describe here a post-combustion CO 2 capture and utilization (CCU) technology that converts the CO 2 into methanol (MeOH), a valuable chemical, thus providing a way to monetize the carbon captured to offset process costs. Methanol synthesis (MeS) has been discussed recently for application to CCU, but thermodynamic limitations make it difficult to convert in a single pass a large CO 2 fraction. Conventional catalysts show slow kinetics in converting CO 2 -rich syngas (or pure CO 2 ) into MeOH. Our Group developed a novel MeS process, employing a membrane contactor reactor (MCR) system that attains carbon conversions significantly higher than equilibrium. Our focus here is to process pure CO 2 streams by combining the MCR with a separate reactor, which converts the CO 2 into a syngas via the reverse water gas shift (RWGS) reaction. In this preliminary effort, the RWGS reactor (RWGSR) is assumed to reach equilibrium. Additional MeS kinetic rate data are generated validating experimentally the ability of the MeS-MCR to process as a feed the RWGSR exit stream. The performance of the combined (RWGSR/MeS-MCR) system is then simulated using a recently developed MeS-MCR model. In conclusion, the findings are encouraging, and research is currently ongoing to experimentally validate the RWGSR/MeS-MCR system performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Biogas Reforming to Syngas: A Review

Interest in novel uses of biogas has increased recently due to concerns about climate change and greater emphasis on renewable energy sources. Although biogas is frequently used in low-value applications such as heating and fuel in engines or even just flared, reforming is an emerging strategy for converting biogas to syngas, which could then be used to obtain high-value-added liquid fuels and chemicals. Interest also exists due to the role of dry, bi-, and tri-reforming in the capture and utilization of CO 2 . New research efforts have explored efficient and effective reforming catalysts, as specifically applied to biogas. In this paper, we review recent developments in dry, bi-, and tri-reforming, where the CO 2 in biogas is used as an oxidant/partial oxidant. The synthesis, characterization, lifetime, deactivation, and regeneration of candidate reforming catalysts are discussed in detail. The thermodynamic limitation and techno-economics of biogas conversion are also discussed.

09 BIOMASS FUELS↗
DOE OSTI2024

Gas-phase surface modification to control catalyst structure and yields in methane dehydroaromatization

Methane dehydroaromatization (MDA) is a promising approach for direct methane transformation to aromatics and hydrogen. The benchmark catalyst Mo/H-ZSM-5 struggles to find commercial adoption because of thermodynamically-limited yields and rapid coking on Brønsted acid and molybdenum carbide species, especially on zeolite external surfaces. Here, gas-phase atomic layer deposition (ALD) overcoats H-ZSM-5 external surfaces with SiO 2 or Al 2 O 3 . NH 3 -TPD, HRTEM, and textural properties show that these overcoats exclusively passivate zeolite external surfaces. Under MDA conditions, SiO 2 gives softer coke and increases cumulative benzene yields by 25%, while Al 2 O 3 strongly decreases yields. H 2 -TPR and UV-visible and Raman spectroscopy show how the overcoats redisperse the MoO x precatalysts, especially over multiple deactivation and isothermal oxidative regeneration cycles. Combined with 27 Al-MAS NMR, MoO x redistribution and dealumination are seen as the causes of long-term deactivation over multiple regeneration cycles, and this process continues to occur regardless of the overcoat. Altogether, the deposition of a small amount of silica on the outer surface of Mo/H-ZSM-5 reduces the formation of hard coke, which could be regenerated by milder methods such as hydrogen treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Edge-Propagation Discharge Mechanism in CFx Batteries—A First-Principles and Experimental Study

Graphite fluoride (CF x ) cathodes coupled with lithium anodes yield one of the highest theoretical specific capacities (>860 mAh/g) among primary batteries. In practice, the observed discharge voltage (~2.5 V) is significantly lower than thermodynamic limits (>4.5 V), the discharge rate is low, and so far Li/CF x has only been used in primary batteries. Understanding the discharge mechanism at atomic length scales will improve practical CFx energy density, rate capability, and rechargeability. So far, purely experimental techniques have not identified the correct discharge mechanism or explained the discharge voltage. In this work, we apply density functional theory calculations to demonstrate that a CF x -edge propagation discharge mechanism based on lithium insertion at the CF/C boundary in partially discharged CF x exhibits a voltage range of 2.5 to 2.9 V—depending on whether solvent molecules are involved. The voltages and solvent dependence agree with our discharge and galvanostatic intermittent titration technique measurements. The predicted discharge kinetics are consistent with CF x operations. Finally, we predict some Li/CF x rechargeability under the application of high potentials, along a charging pathway different from that of discharge. Our work represents a general, quasi-kinetic framework to understand the discharge of conversion cathodes, circumventing the widely used phase diagram approach which most likely does not apply to Li/CF x because equilibrium conditions are not attained in this system.

25 ENERGY STORAGE↗
DOE OSTI2025

Methanogenesis and Acetogenesis in Hydrogenotrophy with Carbonate Minerals: Dependence on Mineral Surface Area, Biofilm Growth, and Microbial Community

The production, storage, and use of hydrogen are anticipated to grow substantially to achieve energy and climate goals. Consequently, microbial communities in many terrestrial and subsurface Earth environments could be exposed to elevated hydrogen concentrations. Hydrogen stimulates metabolic processes that reduce aqueous chemical species, such as bicarbonate or sulfate, that can exchange with solid mineral phases, but the controls on microbial hydrogenotrophy with mineral sources of electron acceptors are not fully understood. Herein, we applied laboratory experiments and biogeochemical modeling to study the response of a natural microbial community to an elevated partial pressure of hydrogen in the presence of carbonate minerals of varying composition, solubility, and size. Experimental incubations and simulation results showed that hydrogen consumption by microbial communities was initially dominated by sulfate reduction and, subsequently, transitioned to acetogenesis and methanogenesis. The rates of acetogenesis and methanogenesis were not correlated with the solubility of carbonate minerals. Instead, we observed strong linear correlations between the rates and surface area of carbonate minerals. Methane and acetate production slowed down in all incubations after about 2 weeks of incubation, although biogeochemical modeling predicted that the metabolic processes were not thermodynamically limited. Electron microscopy and infrared spectroscopy showed that biofilms with diverse microorganisms grew on the carbonates during this period. The methane δ13C value significantly increased, consistent with slower growth at elevated pH. This work highlights that microbial communities form biofilm on carbonate mineral surfaces as a response to hydrogen and that biofilm formation could pose a strong kinetic limitation to hydrogenotrophic metabolism utilizing carbonate minerals.

Acetobacterium↗
DOE OSTI2022

Extracting Inelastic Scattering Cross Sections for Finite and Aperiodic Materials from Electronic Dynamics Simulations

Explicit time-dependent electronic structure theory methods are increasingly prevalent in the areas of condensed matter physics and quantum chemistry, with the broad-band optical absorptivity of molecular and small condensed-phase systems nowadays routinely studied with such approaches. Here, in this paper, it is demonstrated that electronic dynamics simulations can similarly be employed to study cross sections for the scattering-induced electronic excitations probed in nonresonant inelastic X-ray scattering and momentum-resolved electron energy loss spectroscopies. A method is put forth for evaluating the electronic dynamic structure factor, which involves the application of a momentum boost-type perturbation and transformation of the resulting reciprocal space density fluctuations into the frequency domain. Good agreement is first demonstrated between the dynamic structure factor extracted from these electronic dynamics simulations and the corresponding transition matrix elements from linear response theory. The method is then applied to some extended (quasi)one-dimensional systems, for which the wave vector becomes a good quantum number in the thermodynamic limit. Finally, the dispersion of many-body excitations in a series of hydrogen-terminated graphene flakes (and twisted bilayers thereof) is investigated to highlight the utility of the presented approach for capturing morphology-dependent effects in the inelastic scattering cross sections of nanostructured and/or noncrystalline materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Even Faster Exact Exchange for Solids via Tensor Hypercontraction

Hybrid density functional theory (DFT) remains intractable for large periodic systems due to the demanding computational cost of exact exchange. We apply the tensor hypercontraction (THC) (or interpolative separable density fitting) approximation to periodic hybrid DFT calculations with Gaussian-type orbitals using the Gaussian plane wave approach. This is done to lower the computational scaling with respect to the number of basis functions (N) and k-points (N k ) at a fixed system size. Additionally, we propose an algorithm to fit only occupied orbital products via THC (i.e., a set of points, N ISDF ) to further reduce computation time and memory usage. This algorithm has linear scaling cost with k-points, no explicit dependence of N ISDF on basis set size, and overall cubic scaling with unit cell size. Significant speedups and reduced memory usage may be obtained for moderately sized k-point meshes, with additional gains for large k-point meshes. Adequate accuracy can be obtained using THC-oo-K for self-consistent calculations. In conclusion, we perform illustrative hybrid density function theory calculations on the benzene crystal in the basis set and thermodynamic limits to highlight the utility of this algorithm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhanced Twist-Averaging Technique for Magnetic Metals: Applications Using Quantum Monte Carlo

In this study, we propose an improved twist-averaging (TA) scheme for quantum Monte Carlo methods that use converged Kohn–Sham or Hartree–Fock orbitals as the reference. This TA technique is tailored to sample the Brillouin zone of magnetic metals, although it naturally extends to nonmagnetic (NM) conducting systems. The proposed scheme aims to reproduce the reference magnetization and achieves charge neutrality by construction, thus avoiding the large energy fluctuations and the postprocessing needed to correct the energies. It shows the most robust convergence of total energy and magnetism to the thermodynamic limit (TDL) when compared to four other TA schemes. Diffusion Monte Carlo applications are shown on NM Al and ferromagnetic α-Fe. The cohesive energy of Al in the TDL shows an excellent agreement with the experimental result. Furthermore, the magnetic moments in α-Fe exhibit rapid convergence with an increasing number of twists.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Optimized Auxiliary Functions for Robust Mitigation of Finite-Size Errors in Periodic Hybrid Density Functional Theory

When calculating properties of periodic systems at the thermodynamic limit (TDL), the dominant source of finite size error (FSE) arises from the long-range Coulomb interaction, and can manifest as a slowly converging quadrature error when approximating an integral in the reciprocal space by a finite sum. The singularity subtraction (SS) method offers a systematic approach for reducing this quadrature error and thus the FSE. Here, in this work, we first investigate the performance of the SS method in the simplest setting, aiming at reducing the FSE in exact exchange calculations by subtracting the Coulomb contribution with a single, adjustable Gaussian auxiliary function. We demonstrate that a simple fitting method can robustly estimate the optimal Gaussian width and leads to rapid convergence toward the TDL. Furthermore, we suggest new forms of the auxiliary function, whose optimal parameters could also be determined through least-squares fitting. For a range of semiconductors and insulators, the proposed auxiliary functions achieve robust, millihartree-level accuracy in hybrid density functional theory calculations, including cases with sparse k-meshes and large basis sets.

Quiton, Stephen Jon [University of California, Ber↗
DOE OSTI2026

SAP-X2C: Optimally-Simple Two-Component Relativistic Hamiltonian with Size-Intensive Picture Change

We present a simple relativistic exact 2-component (X2C) Hamiltonian that models two-electron picture-change effects using Lehtola’s superposition of atomic potentials (SAP) [S. Lehtola, J. Chem. Theory Comput. 15, 1593−1604 (2019)]. The SAP-X2C approach retains the low cost and technical simplicity of the popular 1-electron X2C (1eX2C) predecessor but is significantly more accurate and has a well-defined thermodynamic limit, making it applicable to extended systems (such as large molecules and periodic crystals). The assessment of the SAP-X2C-based Hartree−Fock total and spinor energies, spin−orbit splittings, equilibrium bond distances, and harmonic vibrational frequencies suggests that SAP-X2C is similar to the more complex atomic meanfield (AMF) X2C counterparts in its ability to approximate the 4-component Dirac−Hartree−Fock reference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Water–Hydrocarbon Interactions in Anionic Pyrene Monohydrate

Interactions between water and polycyclic aromatic hydrocarbons are essential in many aspects of chemistry, from interstellar and atmospheric processes to interfacial hydrophobicity and wetting phenomena. Despite their growing importance, the intermolecular potentials of the water-hydrocarbon interactions are underdeveloped compared to water-water potentials, and there are similarly few experimental probes that are sensitive to the details of the water-hydrocarbon potential. We present a combined experimental and computational study of anionic pyrene monohydrate, one of the simplest water/hydrocarbon clusters. The action spectrum in the OH region of the mass-selected cluster ion provides a rigorous benchmark for intermolecular potentials and computational methodologies. We identify missing intermolecular interactions and shortcomings in conventional dynamics calculations by comparing experimental data to density functional theory and classical molecular dynamics calculations. Kinetic trapping is prevalent, even for one water molecule and one pyrene molecule, leading to slow equilibration in conventional molecular dynamics calculations, even on nanosecond timescales and at low temperatures (50 K). At constant energy, temperature fluctuations for the pair of molecules are substantial. Immersing the system in a bath of soft spheres and employing parallel tempering alleviates kinetic trapping and dampens temperature fluctuations, bringing the system closer to the thermodynamic limit. With such augmented sampling, a simple, flexible water model reproduces the linewidth and the asymmetric broadening of the symmetric OH stretching mode, which we assign to spectral diffusion. In the OH stretching region, dynamics calculations predict a more intense antisymmetric peak than experiments observe but do not predict the bimodal split symmetric peak that the experiments show. Furthermore, our work suggests that electronic polarization, missing in the empirical force field, is responsible for the first discrepancy and that quantum nuclear effects, captured neither in density functional theory nor in classical dynamics, may be responsible for the second.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Kinetics of Hydride Transfer from Catalytic Metal-Free Hydride Donors to CO2

Selective reduction of CO 2 to formate represents an ongoing challenge in photoelectrocatalysis. To provide mechanistic insights, we investigate the kinetics of hydride transfer (HT) from a series of metal-free hydride donors to CO 2 . The observed dependence of experimental and calculated HT barriers on the thermodynamic driving force was modeled by using the Marcus hydride transfer formalism to obtain the insights into the effect of reorganization energies on the reaction kinetics. Our results indicate that even if the most ideal hydride donor were discovered, the HT to CO 2 would exhibit sluggish kinetics (<100 turnovers per second at -0.1 eV driving force), indicating that the conventional HT may not be an appropriate mechanism for solar conversion of CO 2 to formate. We propose that the conventional HT mechanism should not be considered for CO 2 reduction catalysis and argue that the orthogonal HT mechanism, previously proposed to address thermodynamic limitations of this reaction, may also lead to lower kinetic barriers for CO 2 reduction to formate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Optical Properties of Neutral F Centers in Bulk MgO with Density Matrix Embedding

The optical spectra of neutral oxygen vacancies (F 0 centers) in the bulk MgO lattice are investigated using density matrix embedding theory. The impurity Hamiltonian is solved with the complete active space self-consistent field and second-order n-electron valence state perturbation theory (NEVPT2-DMET) multireference methods. Here, to estimate defect-localized vertical excitation energies at the nonembedding and thermodynamic limits, a double extrapolation scheme is employed. The extrapolated NEVPT2-DMET vertical excitation energy value of 5.24 eV agrees well with the experimental absorption maxima at 5.03 eV, whereas the excitation energy value of 2.89 eV at the relaxed triplet defect-localized state geometry overestimates the experimental emission at 2.4 eV by only nearly 0.5 eV, indicating the involvement of the triplet–singlet decay pathway.

embedding↗
DOE OSTI2023

Modular Solar-to-Fuel Electrolysis at Low Cell Potentials Enabled by Glycerol Electrooxidation and a Bipolar Membrane Separator

Solar fuel generation through water electrolysis or electrochemical CO 2 reduction is thermodynamically limited when paired with the oxygen evolution reaction (OER). The glycerol electrooxidation reaction (GEOR) is an alternative anodic reaction with lower anodic electrochemical potential that utilizes a renewable coproduct produced during biodiesel synthesis. We show that GEOR on a Au-Pt-Bi ternary metal electrocatalyst in a model alkaline crude glycerol solution can provide significant cell potential reductions even when paired to reduction reactions in seawater and acidic catholytes via a bipolar membrane (BPM). We showed that the combination of GEOR electrooxidation and a BPM separator lowers the total cell potential by 1 V at an electrolysis current of 10.0 mA cm -2 versus to an anode performing OER when paired with hydrogen evolution and CO 2 reduction cathodes. The observed voltage reduction was steady for periods of up to 80 hours, with minimal glycerol crossover observed through the membrane. Furthermore, these results motivate new, high-performance cell designs for photoelectrochemical solar fuels integrated systems based on glycerol electrooxidation.

25 ENERGY STORAGE↗
DOE OSTI2026

Grand Challenges and Opportunities in Stimulated Dynamic and Resonant Catalysis

Traditional heterogeneous catalysis is constrained by kinetic and thermodynamic limits, such as the Sabatier principle and reaction equilibrium. Dynamic and resonant catalysts hold promise to overcome these limitations by actively oscillating a catalyst’s physical or electronic structure at the time scale of the catalytic cycle, allowing programmable control over reaction pathways, and leading to improved rate and selectivity. External stimuli such as temperature swing, mechanical strain, electric charge, and light can perturb catalyst surfaces in different ways, altering adsorbate coverage, binding energies, and transition states beyond what steady-state catalysis allows. This work surveys the current state of dynamic catalysis, introduces the concept of “ stimulando ” characterization for observing transient dynamics, and outlines key modeling, mechanistic, and benchmarking strategies to advance the field toward improved chemical transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗