SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Interaction of plane, oblique, incident reflecting shock wave with turbulent boundary layer on cooled surface - tables
Cross sections for hydrogen and helium particles produced by 62 MeV and 29 MeV protons on aluminum-27
Differential cross sections for hydrogen and helium particles from proton irradiation of Sn-120
An experimental wind-tunnel investigation to determine the aerodynamic interference and the jet-wake interference associated with the wing, pylon, and high-bypass-ratio, powered, fan-jet model engines has been conducted on a typical high-wing logistics transport airplane configuration. Pressures were measured on the wing and pylons and on the surfaces of the engine fan cowl, turbine cowl, and plug. Combinations of wing, pylons, engines, and flow-through nacelles were tested, and the pressure coefficients are presented in tabular form. Tests were conducted at Mach numbers from 0.700 to 0.825 and angles of attack from -2 to 4 deg.
A computer program was developed that selects, from a list of candidate functions, the approximating functions and associated coefficients which result in the best curve fit of a given set of numerical data. The advantages of the approach used here are: (1) Multivariable approximations can be performed. (2) Flexibility with respect to the type of approximations used is available. (3) The program is designed to choose the best terms to be used in the approximation from an arbitrary list of possible terms so that little knowledge of the proper approximating form is required. (4) Recursion relations are used in determining the coefficients of the approximating functions, which reduces the computer execution time of the program.
Special tests to determine the importance of transition fixing and Reynolds number variation on forces produced by thin delta wings are discussed. Transition fixing was achieved by applying cement to models and sprinkling grit on wet adhesive. Strips were applied along lines emanating from the apex located along sixty-five percent semi-span rays. Tests were made with grit on both surfaces, upper surface only, lower surface only, and on clean surfaces. Reynolds number varied by testing at three dynamic pressures. Correspondence between dynamic pressure and Reynolds number based on the mean aerodynamic chord are shown. No significant changes are noted due to either Reynolds number variation or transition fixing, within the range of Reynolds numbers used for the test.
Noise and wake structure measurements in a ducted fan were conducted. The tip speed was kept at subsonic levels. The anechoic platform used during the test is described. The following conditions are reported: (1) one third octave band analyses of the fan noise data, (2) narrow band analyses of the fan noise for selected test conditions, (3) narrow band sound power level data for all fan test conditions, and (4) velocity and air angle evaluation of blade wake data.
Calibration data are presented for heat flux and pressure profiles, model temperature histories, and model weight and thickness changes.
A tablulation is given of rawinsonde data for NASA's first Atmospheric Variability Experiment (AVE 1) conducted during the period February 19-22, 1964. Methods of data handling and processing, and estimates of error magnitudes are also given. Data taken on the AVE 1 project in 1964 enabled an analysis of a large sector of the eastern United States on a fine resolution time scale. This experiment was run in February 1964, and data were collected as a wave developed in the East Gulf on a frontal system which extended through the eastern part of the United States. The primary objective of AVE 1 was to investigate the variability of parameters in space and over time intervals of three hours, and to integrate the results into NASA programs which require this type of information. The results presented are those from one approach, and represent only a portion of the total research effort that can be accomplished.
Summaries are presented of all the force and moment data acquired during the RSRA Sixth Scale Wind Tunnel Test. These data include and supplement the data presented in curve form in previous reports. Each summary includes the model configuration, wing and empennage incidences and deflections, and recorded balance data. The first group of data in each summary presents the force and moment data in full scale parametric form, the dynamic pressure and velocity in the test section, and the powered nacelle fan speed. The second and third groups of data are the balance data in nondimensional coefficient form. The wind axis coefficient data corresponds to the parametric data divided by the wing area for forces and divided by the product of the wing area and wing span or mean aerodynamic chord for moments. The stability axis data resolves the wind axis data with respect to the angle of yaw.
Explore the source record for details and available documents.
For abstract, see N77-17060.
The raw-acoustic data corrected to standard day, from acoustic tests performed on a 0.508-scale fan vehicle of a 111,300 newton thrust, full-size engine, which has application on an advanced transport aircraft, are presented. The single-stage advanced technology fan was designed to a pressure ratio of 1.8 at a tip speed of 503 m/sec to achieve the desired pressure ratio in a single-stage fan with low radius ratio, and to maintain adequate stall margin. The two basic approaches taken in the acoustic design were: (1) minimization of noise at the source, and (2) suppression of the generated noise in the inlet and bypass exhaust duct. Suppression of the generated noise was accomplished in the inlet through use of the hybrid concept (wall acoustic treatment plus airflow acceleration suppression) and in the exhaust duct with extensive acoustic treatment including a splitter. The goal of the design was attainment of twenty effective perceived noise decibels. The suppression goal of FAR 36-20 was not reached, but improvements in the technology of both front and aft fan-noise suppression were realized.
Basic pressure measurements were made on a 0.087-scale model of a supercritical wing research airplane in the Langley 8 foot transonic pressure tunnel at Mach numbers from 0.25 to 1.00 to determine the effects on the local aerodynamic loads over the wing and rear fuselage of area-rule additions to the sides of the fuselage. In addition, pressure measurements over the surface of the area-rule additions themselves were obtained at angles of sideslip of approximately - 5 deg, 0 deg, and 5 deg to aid in the structural design of the additions. Except for representative figures, results are presented in tabular form without analysis.
Wind tunnel studies are reported on both the canard and wing surfaces of a model that is geometrically identical to one used in several force and moment tests to provide insight into the various aerodynamic interference effects. In addition to detailed pressures measurements, the pressures were integrated to illustrate the effects of Mach number, canard location, and canard-wing interference on various aerodynamic parameters. Transonic pressure tunnel Mach numbers ranged from 0.70 to 1.20 for data taken from 0 deg to approximately 16 deg angle-of-attack at 0 deg sideslip.
Volume 3 of this three volume report is presented. This volume presents power spectral density in tabular form for the convenience of those who might wish to perform additional analysis. Some of the information contained in Volume 1 is again repeated (as in volume 2) in this volume to allow the reader to identify the specific conditions appropriate to each tabular listing and for further analysis.
Power spectral density (PSD) data for all of the flight points examined during the Phase 2 flight data analysis are presented in tabular form. Detailed descriptions of the aircraft, the flight instrumentation and the analysis techniques are given. Measured and calculated vibration mode frequencies are also presented to assist in further interpretation of the PSD data.