Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIME SIGNAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

On time scales and time synchronization using LORAN-C as a time reference signal

The long term performance of the eight LORAN-C chains is presented in terms of the Coordinated Universal Time (UTC) of the U.S. Naval Observatory (USNO); and the use of the LORAN-C navigation system for maintaining the user's clock to a UTC scale is described. The atomic time scale and the UTC of several national laboratories and observatories relative to the international atomic time are reported. Typical performance of several NASA tracking station clocks, relative to the USNO master clock, is also presented.

Chi, A. R.↗
NASA NTRS1985

Relationship between scattered power and correlation time in VHF radar signals

Equations describing the wave number spectra of wind shear-generated turbulent velocities and refractive index irregularities are discussed, and relations between radar echo power and signal correlation time are derived. If the radar backscatter wavelength is within the inertial subrange of the spectrum, a positive correlation between the scattered power and the signal correlation time is expected. For radar Bragg wavelengths within the dissipative subrange of turbulence, the correlation between scattered power and signal correlation time will be negative as usually expected in turbulence.

Royrvik, O.↗
NASA NTRS1972

Utilization of FSK communications for time

The method of time control at a radio station for time signal transmission using frequency shift keying, is discussed. Methods for extracting a recovered clock at the receiver are described. Results of a test involving the methods of processing time signals are presented. The requirements for adapting Precise Time and Time Interval control to a communications system are analyzed. A method for reducing the time required for synchronization or identification of messages and the fallout from the communication system to passive timekeeping users are reported.

Stone, R. R., Jr.↗
NASA NTRS1981

Performance of the real-time array signal combiner during the Voyager mission

During the Voyager Mission each Deep Space Station used its 64 meter antenna together with a 34 meter antenna to form an array. Data were selected from the Saturn encounter period from November 2 to November 13, 1980, to analyze the signal combiner performance. A statistical analysis of the residual gain data from all of the arrayed Deep Space Stations indicates that the Real Time Combiner is operating within the designed accuracy range of 0.2 + or - 0.05 dB around the theoretical gain. A decrease in the residual gain value appears to correlate with an increase in antenna elevation, which may be directly related to the changing antenna gain with elevation. Overall, the combined signal to noise ratio is improved by an average of 0.62 + or - 0.15 dB over the 64 meter signal to noise ratio alone.

Bartok, C. D.↗
NASA NTRS1979

Satellite time transfer via TDRSS and applications

The satellite time transfer terminal design concept for the Tracking and Data Relay Satellite System (TDRSS) and the application of the time signal in autonomously operated spacecraft clock are presented. Some pertinent TDRSS parameters and corrections for the propagation delay measurement as well as the time code used to transfer the time signal are given.

Chi, A. R.↗
DOE OSTI2019

PMU Holdover Performance Enhancement Using Double-Oven Controlled Oscillator

Phasor Measurement Units (PMUs) rely on high-precision timing signals obtained from Global Positioning System (GPS) to guarantee the accuracy of measurements. Unfortunately, GPS receivers inside the PMUs cannot lock to satellite signals frequently, leaving PMUs operating under a holdover condition with degraded accuracy. In this paper, a Double-Oven Controlled Oscillator (DOCO) is proposed to be utilized as a solution for PMU holdover reliability enhancement. Furthermore, it can generate timing signal within 1μs drift to maintain measurement accuracy level for more than 1.5 hours in holdover state. Experimental tests are conducted to verify the effectiveness of the DOCO as a reliable alternative time source for PMUs.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Vehicle trajectory prediction near or at traffic signal

A system and method for determining a predicted trajectory of a human-driven host vehicle as the human-driven host vehicle approaches a traffic signal. The method includes: obtaining a host vehicle-traffic light distance d x and a longitudinal host vehicle speed v x that are each taken when the human-driven host vehicle approaches the traffic signal; obtaining a traffic light signal phase P t and an traffic light signal timing T t ; obtaining a time of day TOD; providing the host vehicle-traffic light distance d x , the longitudinal host vehicle speed v x , the traffic light signal phase P t , the traffic light signal timing T t , and the time of day TOD as input into an artificial intelligence (AI) vehicle trajectory prediction application, wherein the AI vehicle trajectory prediction application implements an AI vehicle trajectory prediction model; and determining the predicted trajectory of the human-driven host vehicle using the AI vehicle trajectory prediction application.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1978

Time synchronization via the transit satellite at Mizusawa

Time signals emitted from Transit satellites and received by the NAVICODE type receiver at Mizusawa, Japan are presented. The International Latitude Observatory of Mizusawa and the U. S. Naval Observatory were compared using the time signals. Propagation delays, a receiver delay, effects of relative motion of satellites, and effects of the ionosphere are discussed.

Hara, J.↗
NASA NTRS1984

The time and frequency comparisons via Loran-C and National TV Network in Yugoslavia

Time comparisons were made between cesium clocks in Yugoslavia and other cesium clocks in the country by the Laboratory of Federal Bureau of Measures and Precious Metals. Regional standard frequency and time signals dissemination is over National TV network by so called active TV system. International comparisons are performed via Loran-C system and by clock transportation. The method of calculation and approximation of the time signal propagation delays is given. Settled comparison results of the cesium clocks via TV network, Loran-C, and by clock transportation are also discussed in this paper.

Markovic, Z. M.↗
NASA NTRS1979

Time coded distribution via broadcasting stations

The distribution of standard time signals via AM and FM broadcasting stations presents the distinct advantages to offer a wide area coverage and to allow the use of inexpensive receivers, but the signals are radiated a limited number of times per day, are not usually available during the night, and no full and automatic synchronization of a remote clock is possible. As an attempt to overcome some of these problems, a time coded signal with a complete date information is diffused by the IEN via the national broadcasting networks in Italy. These signals are radiated by some 120 AM and about 3000 FM and TV transmitters around the country. In such a way, a time ordered system with an accuracy of a couple of milliseconds is easily achieved.

Leschiutta, S.↗
DOE OSTI2021

Pulsar Based Timing for Grid Synchronization

Existing synchronization systems in the power grid, such as the global positioning system, are susceptible to temporary or permanent failures due to various unpredictable and uncontrollable factors such as cyber-attack and electromagnetic interferences, thus affecting the accuracy and reliability of generated timing signal. In this article, a pulsar astronomy-based timing system is proposed to provide an alternative synchronization signal. Further, this clock will offer significant security improvements to power grid applications, such as a wide-area monitoring system, which depends on a precise timing signal. The hardware and software frameworks are described in detail. First, a high-speed sampling hardware platform is designed to collect signals from radio telescopes. Then a periodic pulse extraction method with three steps is proposed to process the pulsar signal, including polyphase filterbanks, incoherent de-dispersion, and sliding window folding. Lastly, three experiments are conducted to verify the effectiveness of the frameworks. The generated pulsar timing pulse is presented, and the factors affecting its accuracy are also discussed. The analysis results demonstrate that the pulsar signals can provide high-accurate timing pulses for grid synchronization.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2016

Far-infrared tangential interferometer/polarimeter design and installation for NSTX-U

The Far-infrared Tangential Interferometer/Polarimeter (FIReTIP) system has been refurbished and is being reinstalled on the National Spherical Torus Experiment—Upgrade (NSTX-U) to supply real-time line-integrated core electron density measurements for use in the NSTX-U plasma control system (PCS) to facilitate real-time density feedback control of the NSTX-U plasma. Inclusion of a visible light heterodyne interferometer in the FIReTIP system allows for real-time vibration compensation due to movement of an internally mounted retroreflector and the FIReTIP front-end optics. Real-time signal correction is achieved through use of a National Instruments CompactRIO field-programmable gate array.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Learning-based traffic signal control algorithms with neighborhood information sharing: An application for sustainable mobility

Here, this research applies R-Markov Average Reward Technique based reinforcement learning (RL) algorithm, namely RMART, for vehicular signal control problem leveraging information sharing among signal controllers in connected vehicle environment. We implemented the algorithm in a network of 18 signalized intersections and compare the performance of RMART with fixed, adaptive, and variants of the RL schemes. Results show significant improvement in system performance for RMART algorithm with information sharing over both traditional fixed signal timing plans and real time adaptive control schemes. Additionally, the comparison with reinforcement learning algorithms including Q learning and SARSA indicate that RMART performs better at higher congestion levels. Further, a multi-reward structure is proposed that dynamically adjusts the reward function with varying congestion states at the intersection. Finally, the results from test networks show significant reduction in emissions (CO, CO 2 , NO x , VOC, PM 10 ) when RL algorithms are implemented compared to fixed signal timings and adaptive schemes.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS2020

Interpreting Solar Wind Turbulent Spectra beyond Taylor’s Hypothesis

In this Letter we apply a methodology, recently proposed by Bourouaine & Perez (BP19), to interpret solar wind turbulent power spectra beyond the Taylor approximation (TA). The turbulent power spectra were measured using Helios spacecraft data near 0.6 au. We use the model proposed in BP19 to reproduce the field-perpendicular power spectrum E(k(sub ⊥)) of antisunward Alfvénic fluctuations in the plasma frame (where k(sub ⊥) is the field-perpendicular wavenumber) from the corresponding measured frequency power spectrum P(sub sc)(ω,θ(sub b)) along the sampling angle ,θ(sub b), which is the angle between the local magnetic field and the sampling direction. Here ω = 2πf and f is the frequency of the time signal. Interestingly enough, we found that for all corresponding measured frequency power spectrum P(sub sc)(ω,θ(sub b)) the reproduced field-perpendicular power spectrum E(k(sub ⊥)) is the same and independent of the considered sampling angle θ(sub b). This finding is consistent with the fact that the analyzed turbulence is strong and highly anisotropic with k(sub ∥) ≪ k(sub ⊥) (where k(sub ∥) is the field-parallel wavenumber). Furthermore, for this specific time signal we found that the commonly used TA is still approximately valid with the important difference that a broadening in k(sub ⊥) for each angular frequency ω is present. This broadening can be described in the context of the methodology proposed in BP19.

Solar magnetic fields↗
DOE OSTI2018

Brightness and uniformity measurements of plastic scintillator tiles at the CERN H2 test beam

Here, we study the light output, light collection efficiency and signal timing of a variety of organic scintillators that are being considered for the upgrade of the hadronic calorimeter of the CMS detector. The experimental data are collected at the H2 test-beam area at CERN, using a 150 GeV muon beam. In particular, we investigate the usage of over-doped and green-emitting plastic scintillators, two solutions that have not been extensively considered. We present a study of the energy distribution in plastic-scintillator tiles, the hit efficiency as a function of the hit position, and a study of the signal timing for blue and green scintillators.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Optimizing Traffic Signal Control to Enhance Transportation Efficiency and Maximize Pedestrian Benefits in the Road Network

Increasing urban mobility requirements demand efficient transportation system strategies for both vehicular and pedestrian movement. This study enhances the Decentralized Graph-based Multi-Agent Reinforcement Learning (DGMARL) approach, originally tailored for vehicular traffic signal timing, to incorporate pedestrian traffic dynamics. The improved algorithm considers crucial metrics such as Eco_PI, assesses vehicle fuel consumption by factoring in stops and delays, and addresses pedestrian waiting time, crucial for system efficiency while acknowledging driver waiting time impact. Utilizing Digital Twin simulation along the MLK Smart Corridor in Chattanooga, Tennessee, the algorithm's performance is compared for various pedestrian control scenarios. To evaluate the effectiveness of DGMARL, this study compared DGMARL-enabled signal management with automated pedestrian traffic detection and an actuated signal management system (real-word baseline) with pedestrian recall, which predetermingly enforces a pedestrian phase every cycle. Findings indicate substantial improvements with DGMARL, showing a 28.29% enhancement in vehicle Eco_PI, a 60.55 % reduction in pedestrian waiting time, and a 55.74% decrease in driver stop delay, on average, compared to the baseline actuated signal timing plan.

Kumarasamy, Vijayalakshmi K [The University of Ten↗
DOE OSTI2025

PMT calibration for the JSNS^2-II far detector with an embedded LED system

The JSNS^2-II (the second phase of JSNS^2, J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment aimed at searching for sterile neutrinos. Here, this experiment has entered its second phase, employing two liquid scintillator detectors located at near and far positions from the neutrino source. Recently, the far detector of the experiment has been completed and is currently in the calibration phase. The following properties of all functioning Photo-Multiplier-Tubes (PMTs) to detect the neutrino events in the far detector have been calibrated: PMT gain, its dependence of supplied High Voltage (HV), Peak-to-Valley (PV), and signal timing. This paper presents a detailed description of the calibration process utilizing the LED system. The LED system of the far detector uses two Ultra-Violet (UV) LEDs, which are effective in calibrating all of the PMTs at once. The UV light is converted into the visible light wavelengths inside liquid scintillator via the wavelength shifters, providing pseudo-isotropic light. To achieve a good energy resolution for physics events, a relative gain adjustment of up to 10% is required for all functioning PMTs. This will be achieved using the HV curves measured and the results of the LED calibration. The Peak-to-Valley (PV) ratio values, which distinguish the single photo-electron signal from the pedestal, are similar to those from the production company. Additionally, the precision of the PMT signal timing is measured to be 2.1 ns. This meets the event reconstruction requirement of 10 ns.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

On the timing performance of thin planar silicon sensors

We report on the signal timing capabilities of thin silicon sensors when traversed by multiple simultaneous minimum ionizing particles (MIP). Three different planar sensors, with depletion thicknesses 133, 211, and 285 µm, have been exposed to high energy muons and electrons at CERN. We describe signal shape and timing resolution measurements as well as the response of these devices as a function of the multiplicity of MIPs. We compare these measurements to simulations where possible. We achieve better than 20 ps timing resolution for signals larger than a few tens of MIPs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗