Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMAL RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Development of a Thermal Radiator Optimization Tool with Alternate Coolants

The development of a modeling tool to optimize the design of a thermal radiator based on capacity, rejection temperature, geometry, type and coolant is presented. The radiator size is determined from the desired capacity, environmental conditions and rejection temperature. Flow through the radiator is derived from the overall heat load and prescribed inlet to outlet delta temperature for a given coolant. The tool considers radiator geometry (i.e., tube spacing and diameter, face-sheet thickness, overall size, etc.) and general type (i.e., parallel/manifold versus serpentine) in the optimization. Selection from a handful of potential coolants is also available in the tool which primarily affects necessary tube diameter to maintain turbulent flow and minimize pressure drop. An Equivalent System Mass (ESM) approach is utilized to include pump power in the optimization. Results from the tool and potential future enhancements are also discussed.

Coolant↗
DOE OSTI2025

Surface Heat Load Analysis Due to Plasma Thermal Radiation on Equatorial Port 09

This paper reports calculated surface heat load owing to plasma thermal radiation, which will be applied to the surfaces of Equatorial Port 09 (EP09) diagnostic shield modules (DSMs) for thermal analysis during normal operation. The calculation assumes that the thermal energy will deposit uniformly in all directions from the plasma to the adjacent components and environment (i.e. gray body radiation). Assuming the temperature for the plasma surface, calculated view factors are used to determine the allocation of thermal energy to each component. The analysis provides an initial assessment of the thermal radiation heat load on the DSMs to be checked in structural/thermal analyses to verify significance. In conclusion, the designs of the EP09 components are still in the early preliminary phase, and changes are expected in the future.

ANSYS↗
NASA NTRS1975

The photon gas formulation of thermal radiation

A statistical consideration of the energy, the linear momentum, and the angular momentum of the photons that make up a thermal radiation field was presented. A general nonequilibrium statistical thermodynamics approach toward a macroscopic description of thermal radiation transport was developed and then applied to the restricted equilibrium statistical thermostatics derivation of the energy, linear momentum, and intrinsic angular momentum equations for an isotropic photon gas. A brief treatment of a nonisotropic photon gas, as an example of the results produced by the nonequilibrium statistical thermodynamics approach, was given. The relativistic variation of temperature and the invariance of entropy were illustrated.

Ried, R. C., Jr.↗
NASA NTRS1962

Measurement of Thermal Radiation Properties of Solids

The overall objectives of the Symposium were to afford (1) an opportunity for workers in the field to describe the equipment and procedures currently in use for measuring thermal radiation properties of solids, (2) an opportunity for constructive criticism of the material presented, and (3) an open forum for discussion of mutual problems. It was also the hope of the sponsors that the published proceedings of the Symposium would serve as a valuable reference on measurement techniques for evaluating thermal radiation properties of solids, partic.ularly for those with limited experience in the field. Because of the strong dependence of emitted flux upon temperature, the program committee thought it advisable to devote the first session to a discussion of the problems of temperature measurement. All of the papers in Session I were presented at the request of and upon topics suggested by the Committee. Because of time and space limitations, it, was impossible to consider all temperature measurement problems that might arise--the objective was rather to call to the attention of the reader some of the problems that might be encountered, and to provide references that might provide solutions.

EMISSION↗
NASA NTRSDate not supplied

Sensitivity Study of Impact Risk Model Results to Thermal Radiation Damage Model for Large Objects

NASA’s Probabilistic Asteroid Impact Risk (PAIR) assessment model assesses the likelihood of potential damage for asteroid impact scenarios. Fast-running models are used to capture the effects of different hazards. This paper looks specifically at local ground damage hazards, including blast overpressure and thermal radiation damage, for large object impact scenarios. A sensitivity study is conducted to determine which parameters, and over what ranges, cause impact risks to become sensitive to thermal damage. Two additional thermal models with different approaches are used for comparison. The study determined the current thermal model is most sensitive to the luminous efficiency parameter that reflects the model’s uncertainty in the amount of energy contributing to the thermal radiation damage. This sensitivity was most apparent for the highest severity damage levels. Comparisons of the three models showed that in addition to sensitivities within the models, the impact risks are also sensitive to the choice of thermal model. The study results were applied to the 2023 PDC hypothetical asteroid impact scenario and parameter ranges of interest determined. At the serious damage level, luminous efficiencies above 0.006 showed a small chance of thermal playing an important role, while luminous efficiencies above 0.0008 led to thermal playing a significant role at the unsurvivable damage severity level. Study results are used to identify key areas where additional model refinement and better knowledge of asteroid properties may be important for improving damage estimates.

SMD↗
NASA NTRS2024

Sensitivity Study of Impact Risk Model Results to Thermal Radiation Damage Model for Large Objects

NASA’s Probabilistic Asteroid Impact Risk (PAIR) assessment model assesses the likelihood of potential damage for asteroid impact scenarios. Fast-running models are used to capture the effects of different hazards. This paper looks specifically at local ground damage hazards, including blast overpressure and thermal radiation damage, for large object impact scenarios. A sensitivity study is conducted to determine which parameters, and over what ranges, cause impact risks to become sensitive to thermal damage. Two additional thermal models with different approaches are used for comparison. The study determined the current thermal model is most sensitive to the luminous efficiency parameter that reflects the model’s uncertainty in the amount of energy contributing to the thermal radiation damage. This sensitivity was most apparent for the highest severity damage levels. Comparisons of the three models showed that in addition to sensitivities within the models, the impact risks are also sensitive to the choice of thermal model. The study results were applied to the 2023 Planetary Defense Conference hypothetical asteroid impact scenario and parameter ranges of interest determined. At the serious damage level, luminous efficiencies above 0.006 showed a small chance of thermal playing an important role, while luminous efficiencies above 0.0008 led to thermal playing a significant role at the unsurvivable damage severity level. Study results are used to identify key areas where additional model refinement and better knowledge of asteroid properties may be important for improving damage estimates.

SMD↗
NASA NTRS1994

High-energy astrophysics: A theoretical analysis of thermal radiation from neutron stars

The unambiguous detection of thermal radiation from the surface of a cooling neutron star was one of the most anxiously awaited results in neutron star physics. This particular Holy Grail was found by Halpern and Holt, who used ROSAT to detect pulsed X-rays from the gamma-ray source Geminga and demonstrate that it was a neutron star, probably a radio pulsar beamed away from us. At an age of approximately 3.4 x 10(exp 5) years, Geminga is in the photon cooling era. Its surface temperature of 5.2 x 10(exp 5) K can be explained within the contexts of both the slow and fast cooling scenarios. In the slow cooling scenario, the surface temperature is too high unless the specific heat of the interior is reduced by extensive baryon pairing. In the fast cooling scenario, the surface temperature will be much too low unless the fast neutrino cooling is shut off by baryon pairing. Two other pulsars, PSR 0656+14 and PSR 1055-52, have also been detected in thermal X-rays by ROSAT. They are also in the photon cooling era. All of this research's neutron star cooling models to date have used the unmagnetized effective temperature-interior temperature relation for the outer boundary condition. Models are being improved by using published magnetic envelope calculations and assumed geometried for the surface magnetic field to determine local interior temperature-emitted flux relations for the surface of the star.

Applegate, James H.↗