Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TERNARY FISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Phase Equilibria in Systems Relevant to Pyroprocessing

Pyroprocessing has many advantages for the recovery and recycle of actinides, especially the transuranic elements, in used nuclear fuel. It has several unique features that distinguish it from other used fuel treatment technologies such as the ability to handle short-cooled fuel, a small process footprint, and production of metallic uranium and uranium - transuranic (U/TRU) products that can be directly fabricated into metallic fuel for advanced reactors. Recovery of the uranium and U/TRU products from the used fuel occurs in an electrorefining step. Uranium and transuranics in the used fuel (metal or reduced oxide) are dissolved at the anode in a molten chloride electrolyte, and electrodeposited at two different cathodes - one for uranium and another for the uranium - transuranic product. During this process, fission products less noble than uranium and transuranics (i.e., lanthanides, alkali and alkaline earth) anodically dissolve into the electrolyte, while only uranium and U/TRU are electrodeposited at the respective cathodes. Thus, there is a buildup of active metal and lanthanide fission products in the molten salt electrolyte. The goal of this work is to improve the fundamental understanding of the chemistry of actinides and transuranics in this complex, multicomponent solution. The fundamental thermodynamic properties of the multi-component molten salt electrolytes are complicated due to the formation of ternary and more complex compounds. As the actinides anodically dissolve at the anode and deposited at the cathode, a gradient in the concentration develops at the anode/electrolyte and the cathode/electrolyte interfaces. Ternary phase formation could impact the performance of the electrorefining system by influencing the chemical activity and thus the redox potentials of the actinide chlorides in the molten salt solution. Literature data on the LiCl-KCl-UCl{sub 3} system is limited, sometimes conflicting, and may reflect the use of older analytical instrumentation, which was less accurate than that currently available. In addition, there has not been any investigation of the low UCl{sub 3} concentration region of the system, which is the region relevant to electrorefining. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigation of Fission Product Transport into Zeolite-A for Pyroprocessing Waste Minimization

Methods to improve fission product salt sorption into zeolite-A have been investigated in an effort to reduce waste associated with the electrochemical treatment of spent nuclear fuel. It was demonstrated that individual fission product chloride salts were absorbed by zeolite-A in a solid-state process. As a result, recycling of LiCl-KCl appears feasible via adding a zone-freezing technique to the current treatment process. Ternary salt molten-state experiments showed the limiting kinetics of CsCl and SrCl2 sorption into the zeolite. CsCl sorption occurred rapidly relative to SrCl2 with no observed dependence on zeolite particle size, while SrCl2 sorption was highly dependent on particle size. The application of experimental data to a developed reaction-diffusion-based sorption model yielded diffusivities of 8.04 × 10-6 and 4.04 × 10-7 cm2 /s for CsCl and SrCl2, respectively. Additionally, the chemical reaction term in the developed model was found to be insignificant compared to the diffusion term.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Summary and Assessment of Metal Fuel Capabilities in Bison

The work described in this report was performed under funding from the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. This report is issued in satisfaction of the level 2 milestone M2MS-18IN0201012 on Release Bison with Initial Metallic Fuel Performance Capability. Metallic fuel development began in Bison a few years after light water reactor development began (~ 2009). The initial development was funded by the Advanced Fuels Campaign. With recent interest from industry, the Nuclear Regulatory Commission, and the Versatile Test Reactor program, the Nuclear Energy Modeling Simulation Program has increased funding for metallic fuel development and validation in FY18. The material models with the most mature development are binary uranium-zirconium and ternary uranium-plutonium-zirconium alloys for fuel and HT9 for cladding. The first material models were incorporated from open literature sources, which include mechanical and thermal material properties that are functions of temperature, porosity, and zirconium concentration, swelling, fission gas release, zirconium diffusion, creep, and sodium coolant channel boundary conditions. These material models have been utilized to simulate ERB-II fuel pins and the results compared to measurements. The EBR-II experiment measurements mostly consist of cladding strain and zirconium redistribution. As such, comparisons to EBR-II measurements are currently limited to these two figures of merit. Simulations and comparisons to experiment measurements have also been done for transient testing of EBR- II fuel pins in TREAT, which included temperature measurements. Preliminary comparisons between Bison calculations and experiment measurements are favorable. These comparisons have also highlighted the importance of the fuel swelling and fission gas release models on cladding strain. Also, Bison metallic fuel simulations are currently being run in support of ATR experiments and VTR exploratory design calculations. Further development and evaluation of individual material models and fuel system models are planned for FY19.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of Natural Organic Matter on Radionuclide Partitioning in Nuclear Fuel Storage Ponds - 17136

One of the nuclear fuel storage ponds at Sellafield is open to the air, and has contained a significant inventory of corroded Magnox fuel and sludge for several decades, with some fission products having been released into solution. The sludge is predominantly composed of brucite (Mg(OH){sub 2}), a corrosion product from the magnesium-based fuel cladding, amongst other corrosion products resulting from the uranium metal fuel. Sr-90 is known to constitute a small mass of the radionuclides present in the pond, but due to its solubility and activity, it is a radionuclide that is at risk of challenging effluent discharge limits. Organic molecules are known to be present also due to the ponds being open to the air, with occasional algal blooms restricting visibility. Understanding the chemical interactions of these components is important to inform ongoing sludge retrievals and effluent management. Batch sorption-desorption experiments have been performed with brucite, Sr-90 and natural organic matter (NOM) (namely humic acid (HA) and Pseudanabaena catenata cyano-bacterial growth supernatant) in both binary and ternary systems at high pH. Ionic strength, pH and order of addition of components were varied. Sr-90 was shown not to interact strongly with the bulk brucite surface in binary or ternary systems under pH conditions relevant to the pond. Humic acid in both binary and ternary systems demonstrated a strong affinity for the brucite surface. In ternary systems HA appeared to enhance sorption of Sr-90, and vice versa, regardless of the order of addition of components. There was no distinct effect of varying ionic strength or pH. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Phase Characteristics of a U-22Pu-4Am-2Np-40Zr Metallic Alloy Containing Rare Earths

Metallic fuel alloys consisting of uranium, plutonium, and zirconium with minor additions of americium and neptunium are under evaluation for potential use to transmute long-lived transuranic actinide isotopes in fast reactors. The current irradiation test series design, designated AFC2, includes minor additions of rare earth elements to simulate expected fission product carryover from the electrochemical molten salt reprocessing technique. The as-cast fuel alloys have been investigated for phase and thermal properties, specifically, enthalpies of transition, transition temperatures, and room temperature phase characteristics. Results and observations related to these characteristics for the “fresh” fuel alloys are provided. The alloy compositions are based on a U 30Pu 5Am-3Np-20Zr alloy, along with additions of 1 and 1.5 wt% RE (at the expense of uranium) where RE denotes rare earth alloy of cerium, lanthanum, praseodymium, and neodymium). Phase behavior and associated transitions have been compared to available U-Pu-Zr ternary diagrams with acceptable agreement. Enthalpies of transition were deconvoluted from heating and cooling thermal traces for relatively reliable values. The rare earth additions to the base alloy have a minimal influence on the room temperature phases present and phase transition temperatures, but the room temperature phases present did impact the enthalpies of transition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Three-cluster model for the {alpha}-accompanied fission of californium nuclei

A three-cluster model is proposed to explain the particle-accompanied binary fission of radioactive nuclei. The model is developed as an extension of the preformed cluster model of Gupta and collaborators. The advantage of this model is that, for a fixed third fragment, we can calculate the fragmentation potential minimized in charge coordinate. For our study we chose the various neutron-deficient to neutron-rich californium nuclei, whose analysis reveals that the closed-shell effect of any one of the fragments in ternary fragmentation presents itself as the most favorable configuration to be observed. As one goes from a neutron-deficient to a neutron-rich californium isotope, the role of the neutron closed shell associated with any one of the preferred fragments changes to that of the proton closed shell, and for very neutron rich isotopes of californium the presence of a double closed shell nucleus enhances the decay probability. The quadrupole deformation of the light fragment (A{sub 2}) associated with the preferred configuration in the symmetric mass region also has a transition from positive to negative deformation as one goes from neutron-deficient to neutron-rich californium isotopes. The calculated relative yields of different fragmentation channels are compared with the available experimental yields for {sup 252}Cf.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Phase Characteristics of a U-20Pu-3Am-2Np-15Zr Metallic Alloy Containing Rare Earths

Metallic fuel alloys consisting of uranium, plutonium, and zirconium with minor additions of americium and neptunium are under evaluation for potential use to transmute long-lived transuranic actinide isotopes in fast reactors. The current irradiation test series design, designated AFC2, includes minor additions of rare earth elements to simulate expected fission product carry-over from the electrochemical molten salt reprocessing technique. The metal fuel alloys have been fabricated by an arc casting technique. The as-cast fuel alloys have been investigated for phase and thermal properties, specifically, enthalpies of transition, transition temperatures, and room temperature phase characteristics. Results and observations related to these characteristics for the “fresh” fuel alloys are provided. The alloy compositions are based on a U-20Pu-3Am-2Np-15Zr alloy, along with additions of 1 and 1.5 wt% RE (at the expense of U) where RE denotes rare earth alloy of cerium, lanthanum, praseodymium and neodymium). Phase behavior and associated transitions have been compared to available U-Pu-Zr ternary diagrams with acceptable agreement. Enthalpies of transition were deconvoluted from heating and cooling thermal traces for relatively reliable values. The rare earth additions to the base alloy have a minimal influence on the room temperature phases present, but the room temperature phases present slightly impacted the enthalpies of transition and transition temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Revisit of Phase Separation of Borosilicate Glass for Vitrification of High Level Radioactive Waste - 19166

Phase separation of glasses for vitrification of high level radioactive waste has been experimentally studied to know uncertainty of the phase separation conditions; temperature and glass compositions as well as to propose possibility of recycling of heavy metals on a longer time scale. Our current results at 700 and 750 deg. C for ternary borosilicate glass system showed that the phase separation region at 700 deg. C spreads along with a direction of increasing Na{sub 2}O composition when compared with the data in literature. On the other hand, at the glass composition employed in the reprocessing plant in Japan, no segregation was observed. Concerning the application of phase separation phenomena, we had previously reported recovery of almost all elements from the vitrified borosilicate glass containing simulated fission products through phase separation of the borosilicate glass and this suggests that we could propose that after vitrification of high-level radioactive waste heavy metals may be retrieved as energy or materials resources when they are required to utilize on a longer time scale. From this standpoint, phase separation of lead borosilicate glass was also studied to seek economical and versatile recycling. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrochemical and Thermodynamic Properties of U in LiCl-KCl-UCl{sub 3} salt system

Pyro-processing technology has been considered and examined by several countries as a promising method for the recovery and recycle of uranium and actinide elements from used nuclear fuel. One of the key processes in pyro-processing is an electro-refiner (ER) where the metallic fission products are loaded into an anode basket and dissolved into lithium-potassium chloride (LiCl-KCl) eutectic salt at 773 K. Many researchers have been exploring the fundamental characterizations of U in LiCl-KCl system by using various electrochemical methods, resulting in several reported values of diffusion coefficient, apparent standard potential, and activity coefficient of U in the salt system. In addition, several researchers measured kinetic parameter of U (exchange current density, i{sub 0}) by using Tafel and linear polarization (LP) methods. Despite available data sets on this ternary salt system, there are discrepancies due to different experimental conditions, design, size of the cell, and measurement techniques. In addition, the i{sub 0} for U/U{sup 3+} reaction has only been measured since 2009; therefore, only few data sets are available to date although the i{sub 0} is critical for the development of dynamic ER model. The value of i{sub 0} is a kinetic characteristic in an ideal equilibrium state; therefore, it is very challenging to be measured by experiments. The authors have estimated the values of i{sub 0} via Tafel and linear polarization methods (LP); however, these methods are lack of maintaining electrode surface area during the measurements. In addition, some data are not following the trends from other literature studies due to its difficulties of the measurement. Therefore, further experimental determinations have to be accomplished to understand the i{sub 0} kinetics and the database for the i{sub 0} of U/U{sup 3+} couple in LiCl-KCl eutectic salt needs to be established systematically. In the present study, an experimental setup was designed and used in a consistent manner to build a meaningful database for U in LiCl-KCl system. LiCl-KCl-UCl{sub 3} salt was prepared at different concentrations and temperatures ranging from 0.5 wt% to 4 wt% and 723 K to 798 K, respectively. Then, CV, open circuit potential (OCP), and electrochemical impedance spectroscopy (EIS) were performed to understand the electrochemical, thermodynamic, and kinetic properties of U. Specially, i{sub 0} values have not been measured via EIS method; therefore, this study provides a good chance to confirm the i{sub 0} values with the new technique.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

25-Pin metallic fuel performance benchmark case based on the EBR-II X430 experiments series

A metallic fuel benchmark case was developed for the fuel performance code BISON based on 25 uranium-zirconium and uranium-plutonium-zirconium pins of the Experimental Breeder Reactor II X430 experiment series. Results of the benchmarks were compared with measurements and calculations made at the time of the experiment as well as subsequent measurements reported in 2019. The comparisons were used to quantify the accuracy of the BISON predictions and to identify patterns in the BISON differences.BISON predicted burnup, plenum pressure, and fission gas release fractions accurately. BISON temperature predictions were somewhat cooler than the temperatures determined at the time of the experiment but appeared to be reasonably accurate considering uncertainties in the legacy temperature calculations, uncertainties in the legacy linear heat rate calculations, and the high sensitivities of the BISON-predicted temperatures to BISON inputs. Fuel axial elongation predictions had errors correlated to fuel composition; BISON tended to underpredict the elongation of binary fuels and overpredict the elongation of ternary fuels. BISON cladding radial dilation predictions were also significantly lower than legacy PIE measurements.Recommendations were made to improve the BISON fuel gaseous swelling model to account for fuel composition, to add additional capabilities to the coolant channel temperature model to ease benchmark development, and to continue developing benchmark cases based on a wide range of experiments in several reactors. Once a wide array of benchmarks is developed, an attempt can be made to enhance or calibrate BISON models to improve the cladding dilation predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Deposition of Ti{sub 2}AlC Thin Film

Future nuclear fission and fusion reactor designs require materials that can withstand long-term operation in extreme environments of high temperature, corrosion intermedia, plasma and fast neutron fluences. MAX phase materials have composition of the form M{sub n+1}AX{sub n} (n = 1-6) where M is an early transition metal, A is often an A-group element, mostly IIIA or IVA, and X is either carbon or nitrogen. They belong to a class of hexagonal structure ternary-layered materials. The main characteristic of the MAX phases is their structure which composes the stacking of n 'ceramic' M-X planes interposed with a 'metallic' A layer. Because of the 'mixed' structure, the MAX phases exhibit a combination of excellent properties of both ceramics and metals: high decomposition temperature, elastic stiffness, high oxidation resistance from ceramics as well as high thermal shock resistance, high thermal and electrical conductivities, and good machinability from metals. MAX phases also show great potential in tolerating radiation damage with both high irradiation tolerance and good self-healing abilities because of its unique structure. MAX phase thin films and coatings have been investigated in recent years. In particular, Ti{sub 2}AlC films have attracted attention because they possess great elastic properties, high temperature oxidation tolerance and excellent corrosion behavior. Therefore, Ti{sub 2}AlC films have been fabricated by several researchers. However, in the deposition of Ti{sub 2}AlC coatings, problems have arisen related to phase purity during sputtering from three elements (Ti, Al, C) targets onto substrates at a high temperature. Recent reports on reactive sputtering deposition of MAX phase carbides and nitrides show that the pure phase films (Ti{sub 2}AlC and Ti{sub 2}AlN) could be deposited at relatively low temperatures.

36 MATERIALS SCIENCE↗

Modeling of Gap Closure in Uranium-Zirconium Alloy Metal Fuel - A Test Problem

Uranium based binary and ternary alloy fuel is a possible candidate for advanced fast spectrum reactors with long refueling intervals and reduced liner heat rating [1]. An important metal fuel issue that can impact the fuel performance is the fuel-cladding gap closure, and fuel axial growth. The dimensional change in the fuel during irradiation is due to a superposition of the thermal expansion of the fuel due to heating, volumetric changes due to possible phase transformations that occur during heating and the swelling due to fission gas retention. The volumetric changes due to phase transformation depend both on the thermodynamics of the alloy system and the kinetics of phase change reactions that occur at the operating temperature. The nucleation and growth of fission gas bubbles that contributes to fuel swelling is also influenced by the local fuel chemistry and the microstructure. Once the fuel expands and contacts the clad, expansion in the radial direction is constrained by the clad, and the overall deformation of the fuel clad assembly depends upon the dynamics of the contact problem. The neutronics portion of the problem is also inherently coupled with microstructural evolution in terms of constituent redistribution and phase transformation. Because of the complex nature of the problem, a series of test problems have been defined with increasing complexity with the objective of capturing the fuel-clad interaction in complex fuels subjected to a wide range of irradiation and temperature conditions. The abstract, if short, is inserted here before the introduction section. If the abstract is long, it should be inserted with the front material and page numbered as such, then this page would begin with the introduction section.

36 MATERIALS SCIENCE↗

Microstructural characterization of as-cast U-20Pu-10Zr-3.86Pd and U-20Pu-10Zr-3.86Pd-4.3Ln

Palladium is being investigated as a potential additive to metallic fuel to bind fission product lanthanides, with the goal of reducing or preventing fuel-cladding chemical interactions (FCCI). A primary cause of FCCI is the lanthanide fission products moving to the fuel periphery and interacting with the cladding. This interaction will lead to wastage of the cladding and eventually to a cladding breach. The current study is a scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigation of as-cast U-20Pu-10Zr-3.86Pd and U-20Pu-10Zr-3.86Pd-4.3Ln in wt%, where Ln = 53Nd-25Ce-16Pr-6La. In U-20Pu-10Zr-3.86Pd, PdZr2 is forming, along with a possible ternary phase between Pu, Zr, and Pd. Pu is also present in the Pd-Ln precipitates formed in U-20Pu-10Zr-3.86Pd-4.3Ln. In the LnPd phase, Pu appears to be substitutional, forming (Ln,Pu)Pd. The other prominent phase, which appears to be Ln7Pd3, has a fine, lamellar structure. As a result, the lanthanides remain essentially constant across this fine structure, but Pu and Pd alternate as to which has the higher concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Assessing High Burnup U-19Pu-10Zr Fuel Performance against Historical and Modeled Behavior

Advancing the deployment of sodium-cooled fast reactors (SFRs) requires thorough testing of metallic fuel pins under accident conditions to establish safe operational limits of high burnup fuel. To conduct transient testing, a comprehensive understanding of steady-state fuel behavior obtained through both experimental characterization and accurate predictive capabilities is needed. This study comparatively assesses the steady-state irradiation performance of two high burnup U-19Pu-10Zr fuel pins, DP-36 and DP-40, irradiated under prototypic fast reactor conditions in preparation for planned safety testing at the Transient Reactor Test Facility. Since DP-40 was designated for use in the test and DP-36 serves as its sibling pin, non-destructive, engineering-scale post-irradiation examinations (PIE) were conducted on both pins while destructive examinations were performed exclusively on DP-36. The results were then assessed against historical performance data from similar fuel pins irradiated in the Experimental Breeder Reactor-II. Additionally, the steady-state irradiation of each pin was modeled using the BISON fuel performance code to assess the accuracy of current modeling capabilities in predicting the baseline irradiation behavior. Non-destructive examinations included neutron radiography to measure fuel column elongation, gamma scanning to verify pin integrity and fission product migration, and profilometry to assess dimensional changes. Benchmarking against existing PIE data revealed consistent patterns in axial fuel column growth and cladding diametral strain, though both pins exhibited longer low-density “fluff” structures, which can have implications for core reactivity and source term calculations. Destructive examinations on DP-36 included fission gas release analysis and sectioning for optical microscopy, which showed more complex constituent redistribution patterns than the traditionally accepted 3-ring model. The axial evolution of fractional areas and porosities of each of the redistributed zones were quantified and presented. Modeling comparisons showed agreement in fractional fission gas release but consistently overestimated axial and radial swelling and disagreed with measured axial porosity patterns. These conservative overpredictions suggested that the pins would appear closer to failure or operational limits at the start of transient tests, potentially leading to higher strain accumulation during the transient. While conservative estimates provide safety margins, they can negatively impact fuel economics. A review of the swelling models identified areas for improvement in the gaseous swelling, solid swelling, and fuel hot-pressing models when applied to ternary fuel. The results of this study highlight the critical importance of conducting pre-test characterization on both test and sibling pins to accurately capture steady-state fuel behavior, providing a precise baseline for post-test evaluations and essential inputs for transient modeling of the planned experiments. The analysis also revealed significant data gaps that require further investigation to enhance the understanding and prediction of fuel swelling and pore dynamics. Collecting comprehensive data across different irradiation conditions, burnup levels, and fuel compositions are essential for refining existing models and developing mechanistic models for both binary and ternary metallic fuels, ultimately improving the integration of modeling and experimental approaches in accident testing.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Osmotic Gradients Induce Bio-Reminiscent Morphological Transformations in Giant Unilamellar Vesicles

We report observations of large-scale, in-plane and out-of-plane membrane deformations in giant uni- and multilamellar vesicles composed of binary and ternary lipid mixtures in the presence of net transvesicular osmotic gradients. The lipid mixtures we examined consisted of binary mixtures of DOPC and DPPC lipids and ternary mixtures comprising POPC, sphingomyelin and cholesterol over a range of compositions – both of which produce co-existing phases for selected ranges of compositions at room temperature under thermodynamic equilibrium. In the presence of net osmotic gradients, we find that the in-plane phase separation potential of these mixtures is non-trivially altered and a variety of out-of-plane morphological remodeling events occur. The repertoire of membrane deformations we observe display striking resemblance to their biological counterparts in live cells encompassing vesiculation, membrane fission and fusion, tubulation and pearling, as well as expulsion of entrapped vesicles from multicompartmental giant unilamellar vesicles through large, self-healing transient pores. These observations suggest that the forces introduced by simple osmotic gradients across membrane boundaries could act as a trigger for shape-dependent membrane and vesicle trafficking activities. We speculate that such coupling of osmotic gradients with membrane properties might have provided lipidmediated mechanisms to compensate for osmotic stress during the early evolution of membrane compartmentalization in the absence of osmoregulatory protein machinery.

59 BASIC BIOLOGICAL SCIENCES↗

Research Needs for Uranium-Zirconium- Based Metallic Fuels

The purpose of this report is to summarize the needs and present recommendations related to the future direction for U-Zr-based metallic fuel research (including binary U-Zr and ternary U-Pu-Zr alloys). These needs and recommendations were determined by subject matter experts from various institutions during a two-day workshop held at the University of Florida in November, 2019. During open-floor discussions, the highest priority gaps in our understanding of U-Zr-based fuels were down-selected, and near- and long-term needs that directly impact the implementation of these metallic fuels were identified. The identified near-term needs include investigation of the following phenomena: i) swelling and fission gas release, ii) fuel-cladding chemical interaction, iii) phase evolution/constituent redistribution, and iv) thermal properties of the fuels. The long-term needs are: i) investigation of fuel creep and plasticity and ii) fission product (lanthanide) transport. In addition, there was general agreement that all institutions and subject matter experts would benefit from an open-source metallic fuels database with thermophysical property and microstructural data, along with fuel operation/irradiation history, which should be regularly updated with vetted information from new experimental and computational investigations and used to advance metallic fuels research and development. Finally, we recommend that metallic fuel research should be ongoing and that fuel qualification and fuel optimization should be equally prioritized; research combining experiments with modeling and simulation has the largest potential impact.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermodynamic evaluation and modeling of the CeF 3 -LaF 3 -LiF-NaF system

The thermodynamic properties of the LiF-NaF-CeF 3 -LaF 3 pseudo-quaternary system have been evaluated, and models for the relevant phases have been revised or newly developed. The solid solubility of NaF in LaF 3 and CeF 3 was described in the model based on reported phase-equilibria observations and results from density functional theory calculations. The Gibbs energy functions for the NaCeF 4 and NaLaF 4 phases have been updated with recently reported thermochemical measurements. The Gibbs energy functions and model relations for the LiF-NaF-LaF 3 and LiF-NaF-CeF 3 pseudo-ternary systems were successfully optimized based on thermochemical properties and phase equilibria observations.

CALPHAD↗

Microstructural characterization of annealed U-20Pu-10Zr-3.86Pd and U-20Pu-10Zr-3.86Pd-4.3Ln

Palladium is being investigated as a potential additive to metallic fuel to bind fission product lanthanides, with the goal of reducing or preventing fuel-cladding chemical interactions (FCCI). A primary cause of FCCI is the lanthanide fission products moving to the fuel periphery and interacting with the cladding. This interaction will lead to wastage of the cladding and eventually to a cladding breach. The current study is the microstructural characterization of annealed U-20Pu-10Zr-3.86Pd and U-20Pu-10Zr-3.86Pd-4.3Ln in wt. %, where Ln = 53Nd-25Ce-16Pr-6La, using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). In both alloys, the matrix is comprised of ζ-U 0.4 Pu 0.6 and δ-(U,Pu)Zr 2 . Based on the matrix compositions, modifications to the room temperature extrapolated U-Pu-Zr ternary phase diagram are suggested. In U-20Pu-10Zr-3.86Pd, there is very little δ phase, due to formation of PdZr 2 . In U-20Pu-10Zr-3.86Pd-4.3Ln, a lanthanide-rich phase is present, although it does not have the crystal structure for 53Nd-25Ce-16Pr-6La. Furthermore this phase cannot be identified based on known compounds. (Ln,Pu)Pd is the primary lanthanide phase, with Pu substituting into the crystal structure in place of Nd.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗