Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stellarator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Stellar populations with MEGARA: The inner regions of NGC 7025

This paper aims to determine the capabilities of the MEGARA spectrograph at the Gran Telescopio Canarias (GTC), which is an optical integral-field unit, for studying stellar populations. We also aim to exploit its combination of high spectral (R ~ 6000, 12 000 and 20 000) and spatial (0.62") resolution within its 12".5 × 11"​​.3 field of view. We do this by analysing the commissioning data of the nearby S0a galaxy NGC 7025. We establish a systematic method through which we can determine the properties of the stellar populations in the observations made with MEGARA, more specifically, within the MEGADES legacy project. For this paper in particular, we determine the properties of the stellar populations of NGC 7025. We used MEGARA observations of galaxy NGC 7025 that were taken during the commissioning phase of the instrument. We applied different approaches to estimate the properties of the stellar populations with the highest possible certainty. In addition to the specific study of NGC 7025 and in the context of the MEGADES survey, we have carried out a number of tests to determine the expected errors (including potential biases) in these star formation history (SFH) derivations as a function of these parameters, namely spectral setup, signal-to-noise ratio, σ, and the SFH itself. All the studies we conduct (both full spectral fitting and absorption line indices) of the stellar populations of NGC 7025 indicate that the stars that form its bulge have supersolar metallicity and considerably old ages (~10 Gyr) in general. Using three different combinations of MEGARA spectral setups, we determined that the bulge of NGC 7025 has smild negative mass-weighted age gradient. For the more detailed SFH, our results indicate that in addition to a rather constant star formation at early epochs, a peak in the formation history of the stars in the bulge is also found 3.5–4.5 Gyr ago. This partly explains the mass-weighted age gradients we measured. The scenario presented in NGC 7025 is that of an isolated galaxy under secular evolution that about 3.5–4.5 Gyr ago likely experienced a minor merger (mass ratio 1/10) that induced an increase in star formation and also perturbed the morphology of its outer disc. In addition to these specific results for NGC 7025, we report different lessons learned for the ongoing exploitation of the MEGADES survey with the GTC, such as the need to obtain combined observations in the LR-B + LR-V setups and a signal-to-noise ratio of at least 20 per Å.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

PM4Stell: A prototype permanent magnet stellarator structure

Permanent magnets provide a possible solution to simplify complicated stellarator coils. Here, a prototype permanent magnet stellarator structure, PM4Stell, has been funded to demonstrate the technical feasibility of using permanent magnets to create the shaping field of a stellarator. Permanent magnets in uniform cubes with three polarization directions will be carefully placed to generate the required magnetic field for a National Compact Stellarator eXperiment-like equilibrium together with planar toroidal field coils. Discrete magnets will be glued together and inserted into a “post-office-box-like” supporting structure. Electromagnetic and structural analyses have been done to validate the design. Error field correction magnets will be used to shim possible error fields. The design efforts of the prototype permanent magnet stellarator structure are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Stellarator fusion systems enabled by arrays of planar coils

We present an overview of a novel electromagnetic coil configuration for stellarators and its application to two near-term fusion systems. The novel coil configuration is the planar coil stellarator, able to implement precisely-quasisymmetric 3D magnetic fields using a set of planar, plasma-encircling coils and a set of planar, field-shaping coils situated on a surface surrounding the plasma. This configuration combines the stellarator’s advantages of steady-state operation, stability, low recirculating power fraction, and a mature physics basis, with the benefits of using simpler, planar coils which allow for a maintenance scheme leveraging large ports, and the ability to control magnets individually. The initial near-term use case considered is a steady state deuterium–deuterium stellarator neutron source, called Eos. The second near-term use case considered is a deuterium–tritium stellarator fusion pilot plant, called Helios, that would be approximately twice the linear dimension of the Eos design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

The topology of non-resonant stellarator divertors

We apply topological methods to better understand how the magnetic field in the stellarator edge can be diverted away from the confined region. Our primary method is calculating the winding numbers of closed contours, which gives information on the number and nature of fixed points within a bounded region. We first apply this to the non-resonant divertor Hamiltonian system, and present a simple explanation for the system’s diversion: trajectories are guided away from the confined region by X-points which are ‘unpaired’ i.e. do not have corresponding O-points and therefore do not resemble an island chain. We show how similar phenomena can occur in a similar, axisymmetric Hamiltonian system. Secondly, we find examples of neoclassically optimised stellarators in the quasi-symmetric stellarator repository database which divert the magnetic field via unpaired X-points. We present and discuss three examples, each containing novel phenomena which might be desirable for stellarator divertors. These examples serve as an illustration of new divertor possibilities which exist in realistic stellarators, which may ultimately have application for future experiments and reactors.

X-points, topology↗
DOE OSTI2021

Data-driven Stellar Models

We developed a data-driven model to map stellar parameters ( T eff , log g , and [Fe/H]) accurately and precisely to broadband stellar photometry. This model must, and does, simultaneously constrain the passband-specific dust reddening vector in the Milky Way, R. The model uses a neural network to learn the (de-reddened) absolute magnitude in one band and colors across many bands, given stellar parameters from spectroscopic surveys and parallax constraints from Gaia. To demonstrate the effectiveness of this approach, we train our model on a data set with spectroscopic parameters from LAMOST, APOGEE, and GALAH, Gaia parallaxes, and optical and near-infrared photometry from Gaia, Pan-STARRS 1, Two Micron All Sky Survey and Wide-field Infrared Survey Explorer. Testing the model on these data sets leads to an excellent fit and a precise—and by construction—accurate prediction of the color–magnitude diagrams in many bands. This flexible approach rigorously links spectroscopic and photometric surveys, and also results in an improved, T eff -dependent R. As such, it provides a simple and accurate method for predicting photometry in stellar evolutionary models. Our model will form a basis to infer stellar properties, distances, and dust extinction from photometric data, which should be of great use in 3D mapping of the Milky Way. Our trained model can be obtained at doi:10.5281/zenodo.3902382.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Wolf-Rayet Galaxies in SDSS-IV MaNGA. II. Metallicity Dependence of the High-mass Slope of the Stellar Initial Mass Function

As hosts of living high-mass stars, Wolf-Rayet (WR) regions or WR galaxies are ideal objects for constraining the high-mass end of the stellar initial mass function (IMF). We construct a large sample of 910 WR galaxies/regions that cover a wide range of stellar metallicity (from Z ~ 0.001 to 0.03) by combining three catalogs of WR galaxies/regions previously selected from the SDSS and SDSS-IV/MaNGA surveys. We measure the equivalent widths of the WR blue bump at ~4650 Å for each spectrum. They are compared with predictions from stellar evolutionary models Starburst99 and BPASS, with different IMF assumptions (high-mass slope α of the IMF ranging from 1.0 to 3.3). Both singular evolution and binary evolution are considered. We also use a Bayesian inference code to perform full spectral fitting to WR spectra with stellar population spectra from BPASS as fitting templates. We then make a model selection among different α assumptions based on Bayesian evidence. These analyses have consistently led to a positive correlation of the IMF high-mass slope α with stellar metallicity Z, i.e., with a steeper IMF (more bottom-heavy) at higher metallicities. Specifically, an IMF with α = 1.00 is preferred at the lowest metallicity (Z ~ 0.001), and an Salpeter or even steeper IMF is preferred at the highest metallicity (Z ~ 0.03). These conclusions hold even when binary population models are adopted.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Early Results from GLASS-JWST. XI. Stellar Masses and Mass-to-light Ratio of z > 7 Galaxies

We exploit James Webb Space Telescope (JWST) NIRCam observations from the GLASS-JWST-Early Release Science program to investigate galaxy stellar masses at z > 7. We first show that JWST observations reduce the uncertainties on the stellar mass by a factor of at least 5–10, when compared with the highest-quality data sets available to date. We then study the UV mass-to-light ratio, finding that galaxies exhibit a a two orders of magnitude range of M / L UV values for a given luminosity, indicative of a broad variety of physical conditions and star formation histories. As a consequence, previous estimates of the cosmic stellar-mass density—based on an average correlation between UV luminosity and stellar mass—can be biased by as much as a factor of ~6. Our first exploration demonstrates that JWST represents a new era in our understanding of stellar masses at z > 7 and, therefore, of the growth of galaxies prior to cosmic reionization.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Merging of the superbanana plateau and $\sqrt{v}$ transport regimes in nearly quasisymmetric stellarators

We report alpha particle confinement is one of the most demanding issues for stellarators. It now seems clear that it is possible to design optimized stellarators that confine the background plasma at near tokamak radial transport levels. Moreover, adequate collisionless alpha particle confinement is possible in the core of a highly optimized stellarator. Here, the collisional confinement of barely trapped alphas in an optimized stellarator is considered by accounting for the resonance due to the reversal in direction of the drift within a flux surface and investigating the sensitive role of magnetic shear in keeping this resonance close to the passing boundary in some nearly quasisymmetric stellarator configurations. The treatment relies on a narrow collisional boundary layer formulation that combines the responses of both these resonant pitch angle alphas and the remaining barely trapped alphas. A novel merged regime treatment leads to explicit expressions for the energy diffusivity for both superbanana plateau (or resonant plateau) and $\sqrt{v}$ transport in the large aspect ratio limit for a slowing down tail alpha distribution function, where v is the effective pitch angle scattering collision frequency of the trapped alphas off the background ions. Depending on the details of the optimization scheme and the sign of the magnetic shear, modest magnetic shear can be used to reduce superbanana (or resonant) plateau transport to below the $\sqrt{v}$ transport level. In addition, a quasilinear equation retaining spatial diffusion is derived for a general alpha distribution function that allows the radial alpha transport to modify the distribution so it is no longer isotropic in velocity space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

J-PLUS: Support vector regression to measure stellar parameters

Stellar parameters are among the most important characteristics in studies of stars which, in traditional methods, are based on atmosphere models. However, time, cost, and brightness limits restrain the efficiency of spectral observations. The Javalambre Photometric Local Universe Survey (J-PLUS) is an observational campaign that aims to obtain photometry in 12 bands. Owing to its characteristics, J-PLUS data have become a valuable resource for studies of stars. Machine learning provides powerful tools for efficiently analyzing large data sets, such as the one from J-PLUS, and enables us to expand the research domain to stellar parameters. The main goal of this study is to construct a support vector regression (SVR) algorithm to estimate stellar parameters of the stars in the first data release of the J-PLUS observational campaign. The training data for the parameter's regressions are featured with 12-waveband photometry from J-PLUS and are crossidentified with spectrum-based catalogs. These catalogs are from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope, the Apache Point Observatory Galactic Evolution Experiment, and the Sloan Extension for Galactic Understanding and Exploration. We then label them with the stellar effective temperature, the surface gravity, and the metallicity. Ten percent of the sample is held out to apply a blind test. We develop a new method, a multi-model approach, in order to fully take into account, the uncertainties of both the magnitudes and the stellar parameters. The method utilizes more than 200 models to apply the uncertainty analysis. We present a catalog of 2 493 424 stars with the root mean square error of 160 K in the effective temperature regression, 0.35 in the surface gravity regression, and 0.25 in the metallicity regression. We also discuss the advantages of this multi-model approach and compare it to other machine-learning methods.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

A giant umbrella-like stellar stream around the tidal ring galaxy NGC 922

Tidal ring galaxies (TRGs) are rarely observed in the local universe due to their intrinsically transient nature. The tidal ring structures are the result of strong interactions between gas-rich stellar disks and smaller galactic systems, and do not last longer than ~500 Myr. Therefore, these are perfect scenarios in which to look for the debris of recently accreted dwarf galactic systems. Our goal is to study the low surface brightness stellar structures around the TRG NGC 922 and to revise the hypothesis of its formation in light of these new data. We present new deep images of the TRG NGC 922 and its surroundings from the DESI Legacy survey data and from our observations with an amateur telescope. These observations are compared with results from high-resolution N-body simulations that were designed to reproduce an alternative formation scenario for this peculiar galaxy. Our new observations unveil that the low surface brightness stellar tidal structures around NGC 922 are much more complex than reported in previous works. In particular, the formerly detected tidal spike-like structure at the north-east of the central galaxy disk is not connected with the dwarf companion galaxy PGC 3080368, which has been suggested as the intruder triggering the ring formation of NGC 922. The deep images reveal that this tidal structure mainly has a fainter giant umbrella-like shape, and thus it was formed from the tidal disruption of a different satellite. Using the broad-band g, r, and z DESI LS images, we measured the photometric properties of this stellar stream, estimating a total absolute magnitude in the r band of M r = -17.0 ± 0.03 mag and a total stellar mass for the stream of between 6.9 and 8.5×10 8 M ⊙ . We performed a set of N-body simulations to reproduce the observed NGC922-intruder interaction, suggesting a new scenario for the formation of its tidal ring from the infall of a gas-rich satellite around 150 Myr ago. Finally, our deep images also reveal a tidal shell around the dwarf galaxy PGC 3080368, a possible fossil of a recent merger with a smaller satellite, which may suggest it is in its first infall towards NGC 922.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Designing stellarators using perpendicular permanent magnets

We have developed a fast method to design perpendicular permanent magnets for simplifying stellarator coils based on existing codes. Coil complexity is one of the main challenges for stellarators. To date, only electromagnetic coils have been used to generate 3D fields for stellarators. Permanent magnets provide an alternative way to produce the desired magnetic field for optimized stellarators. In this paper, we revisit the concept of representing surface current using magnetic dipoles and carry out numerical validations. A surface magnetization is proven to be equivalent to the surface current that can be linearly solved by existing coil design codes. An incremental multi-layer method has been developed to obtain a practical solution that is attainable with present permanent magnets. With this method, we can reproduce a half-Tesla NCSX configuration using specially designed neodymium magnets together with simple planar coils. It shows that stellarator coils could be substantially simplified by adopting permanent magnets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Nonlinear saturation of ballooning modes in stellarators

Ballooning mode saturation is investigated in realistic stellarator configurations using the flux tube approach of Ham et al (2018 Plasma Phys. Control. Fusion 60 075017), Ham et al (2016 Phys. Rev. Lett. 116 235001). The method is adapted to account for the lack of exact force balance in stellarator equilibrium solvers that assume existence of nested flux surfaces. A variational approach for calculating flux tube energy is developed to overcome this force error problem in stellarator numerical equilibria. Saturated (equilibrium) flux tube states that cross 10%–20% of the plasma minor radius are shown to exist for linearly ballooning unstable profiles. It is shown that several features of the displaced flux tube structure in a full nonlinear MHD simulation of Wendelstein 7X are reproduced by our model. Saturated states are found in a compact stellarator equilibrium close but below the marginal ballooning linear instability, i.e. the unperturbed equilibrium is metastable. This suggests that edge-localized-mode-like explosive MHD behavior may be possible in stellarators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Stellar and weak lensing profiles of massive galaxies in the Hyper-Suprime Cam survey and in hydrodynamic simulations

ABSTRACT We perform a consistent comparison of the mass and mass profiles of massive (M⋆ > 1011.4 M⊙) central galaxies at z ∼ 0.4 from deep Hyper Suprime-Cam (HSC) observations and from the Illustris, TNG100, and Ponos simulations. Weak lensing measurements from HSC enable measurements at fixed halo mass and provide constraints on the strength and impact of feedback at different halo mass scales. We compare the stellar mass function (SMF) and the Stellar-to-Halo Mass Relation (SHMR) at various radii and show that the radius at which the comparison is performed is important. In general, Illustris and TNG100 display steeper values of α where $M_{\star } \propto M_{\rm vir}^{\alpha }$. These differences are more pronounced for Illustris than for TNG100 and in the inner rather than outer regions of galaxies. Differences in the inner regions may suggest that TNG100 is too efficient at quenching in situ star formation at Mvir ≃ 1013 M⊙ but not efficient enough at Mvir ≃ 1014 M⊙. The outer stellar masses are in excellent agreement with our observations at Mvir ≃ 1013 M⊙, but both Illustris and TNG100 display excess outer mass as Mvir ≃ 1014 M⊙ (by ∼0.25 and ∼0.12 dex, respectively). We argue that reducing stellar growth at early times in $M_\star \sim 10^{9-10} \, \mathrm{M}_{\odot }$ galaxies would help to prevent excess ex-situ growth at this mass scale. The Ponos simulations do not implement AGN feedback and display an excess mass of ∼0.5 dex at r < 30 kpc compared to HSC which is indicative of overcooling and excess star formation in the central regions. The comparison of the inner profiles of Ponos and HSC suggests that the physical scale over which the central AGN limits star formation is r ≲ 20 kpc. Joint comparisons between weak lensing and galaxy stellar profiles are a direct test of whether simulations build and deposit galaxy mass in the correct dark matter haloes and thereby provide powerful constraints on the physics of feedback and galaxy growth. Our galaxy and weak lensing profiles are publicly available to facilitate comparisons with other simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Structural and stellar-population properties versus bulge types in Sloan Digital Sky Survey central galaxies

ABSTRACT This paper studies pseudo-bulges (P-bulges) and classical bulges (C-bulges) in Sloan Digital Sky Survey (SDSS) central galaxies using the new bulge indicator ΔΣ1, which measures relative central stellar-mass surface density within 1 kpc. We compare ΔΣ1 to the established bulge-type indicator Δ〈μe〉 from Gadotti (2009) and show that classifying by ΔΣ1 agrees well with Δ〈μe〉. ΔΣ1 requires no bulge–disc decomposition and can be measured on SDSS images out to z = 0.07. Bulge types using it are mapped on to 20 different structural and stellar-population properties for 12 000 SDSS central galaxies with masses 10.0 < log M*/M⊙ < 10.4. New trends emerge from this large sample. Structural parameters show fairly linear log–log relations versus ΔΣ1 and Δ〈μe〉 with only moderate scatter, while stellar-population parameters show a highly non-linear ‘elbow’ in which specific star formation rate remains roughly flat with increasing central density and then falls rapidly at the elbow, where galaxies begin to quench. P-bulges occupy the low-density end of the horizontal arm of the elbow and are universally star forming, while C-bulges occupy the elbow and the vertical branch and exhibit a wide range of star formation rates at a fixed density. The non-linear relation between central density and star formation rate has been seen before, but this mapping on to bulge class is new. The wide range of star formation rates in C-bulges helps to explain why bulge classifications using different parameters have sometimes disagreed in the past. The elbow-shaped relation between density and stellar indices suggests that central structure and stellar populations evolve at different rates as galaxies begin to quench.

Luo, Yifei↗
DOE OSTI2020

Can we detect the stellar differential rotation of WASP-7 through the Rossiter–McLaughlin observations?

ABSTRACT The Rossiter–McLaughlin (RM) effect is the radial velocity signal generated when an object transits a rotating star. Stars rotate differentially and this affects the shape and amplitude of this signal, on a level that can no longer be ignored with precise spectrographs. Highly misaligned planets provide a unique opportunity to probe stellar differential rotation via the RM effect, as they cross several stellar latitudes. In this sense, WASP-7, and its hot Jupiter with a projected misalignment of ∼90°, is one of the most promising targets. The aim of this work is to understand if the stellar differential rotation is measurable through the RM signal for systems with a geometry similar to WASP-7. In this sense, we use a modified version of soap3.0 to explore the main hurdles that prevented the precise determination of the differential rotation of WASP-7. We also investigate whether the adoption of the next generation spectrographs, like ESPRESSO, would solve these issues. Additionally, we assess how instrumental and stellar noise influence this effect and the derived geometry of the system. We found that, for WASP-7, the white noise represents an important hurdle in the detection of the stellar differential rotation, and that a precision of at least 2 m s−1 or better is essential.

Serrano, L. M.↗
DOE OSTI2026

Quantifying biases in stellar masses of JWST high- z quasar host galaxies caused by quasar subtraction

The James Webb Space Telescope (JWST) has enabled dozens of high-z quasar host galaxy detections. Many of these observations imply galaxies with black holes that are overmassive compared to their low-z counterparts. However, the bright quasar point source removal can cause significant biases in recovered host magnitudes and stellar mass measurements due to the degeneracy in host galaxy and quasar light. We develop a statistical method to disentangle the quasar host galaxy stellar mass measurements from observational biases during the point source removal assuming the PSF is modelled perfectly. We use the BlueTides simulation to generate mock images and perform point source removal on thousands of simulated high-z quasar host galaxies, constructing corrected host magnitude posteriors. We find that removing a bright quasar in JWST photometry tends to either correctly recover or modestly misestimate host magnitudes, with a maximum magnitude underestimate of 0.2 mag. With our corrected magnitude posteriors, we perform SED fitting on each quasar host galaxy and compare the stellar mass measurement before and after the correction. We find that stellar mass estimates are generally robust, or misestimated by $<$ 0.3 dex. We also find that the stellar masses of a subset of hosts (J0844−0132, J0911+0152, and J1146−0005) remain unconstrained, as key photometric bands provide only flux upper limits. Accounting for observational biases does not resolve the apparent mismatch between black hole and host galaxy growth at high-z, where some quasars appear to host overmassive black holes while others reside in relatively massive galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A Kinematic Perspective on the Formation Process of the Stellar Groups in the Rosette Nebula

Stellar kinematics is a powerful tool for understanding the formation process of stellar associations. Here, we present a kinematic study of the young stellar population in the Rosette nebula using recent Gaia data and high-resolution spectra. We first isolate member candidates using the published mid-infrared photometric data and the list of X-ray sources. A total of 403 stars with similar parallaxes and proper motions are finally selected as members. The spatial distribution of the members shows that this star-forming region is highly substructured. The young open cluster NGC 2244 in the center of the nebula has a pattern of radial expansion and rotation. We discuss its implication on the cluster formation, e.g., monolithic cold collapse or hierarchical assembly. On the other hand, we also investigate three groups located around the border of the H ii bubble. The western group seems to be spatially correlated with the adjacent gas structure, but their kinematics is not associated with that of the gas. The southern group does not show any systematic motion relative to NGC 2244. These two groups might be spontaneously formed in filaments of a turbulent cloud. The eastern group is spatially and kinematically associated with the gas pillar receding away from NGC 2244. This group might be formed by feedback from massive stars in NGC 2244. Our results suggest that the stellar population in the Rosette Nebula may form through three different processes: the expansion of stellar clusters, hierarchical star formation in turbulent clouds, and feedback-driven star formation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

A Systematic Analysis of Stellar Populations in the Host Galaxies of Changing-look AGNs

“Changing-look” active galactic nuclei (CL-AGNs) are a newly discovered class of AGNs that show the appearance (or disappearance) of broad emission lines within short timescales (months to years),and are often associated with dramatic changes in their continuum emissions. They provide us with an unprecedented chance to directly investigate the host galaxy properties with minimal contamination from the luminous central engine during the turn-off state, which is difficult for normal luminous AGNs. In this work, for the first time, we systematically characterize the stellar populations and star formation histories of host galaxies for 26 turn-off CL-AGNs using the stellar population synthesis code STARLIGHT. We find that the stellar populations of CL-AGNs are similar to those of normal AGNs, except that the intermediate stellar populations contribute more fractions. We estimate their stellar velocity dispersions (σ * ) and black hole masses (M BH , vir ), and find that CL-AGNs also follow the overall M BH –σ * relationship. We also confirm the previous claims that CL-AGNs tend to be biased toward lower Eddington ratios, and that their extreme variabilities are more likely due to the intrinsic changes of the accretion rates. In addition, CL-AGNs with recent star formations tend to have higher Eddington ratios. Compared with previous studies, our analysis suggests that there may be a correlation between CL-AGN host galaxy properties and their CL phenomena.

79 ASTRONOMY AND ASTROPHYSICS↗