Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar energy conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Feasibility Study of a Satellite Solar Power Station

A feasibility study of a satellite solar power station (SSPS) was conducted to: (1) explore how an SSPS could be flown and controlled in orbit; (2) determine the techniques needed to avoid radio frequency interference (RFI); and (3) determine the key environmental, technological, and economic issues involved. Structural and dynamic analyses of the SSPS structure were performed, and deflections and internal member loads were determined. Desirable material characteristics were assessed and technology developments identified. Flight control performance of the SSPS baseline design was evaluated and parametric sizing studies were performed. The study of RFI avoidance techniques covered (1) optimization of the microwave transmission system; (2) device design and expected RFI; and (3) SSPS RFI effects. The identification of key issues involved (1) microwave generation, transmissions, and rectification and solar energy conversion; (2) environmental-ecological impact and biological effects; and (3) economic issues, i.e., costs and benefits associated with the SSPS. The feasibility of the SSPS based on the parameters of the study was established.

Glaser, P. E.↗

Development of an economical silicon solar cell

The growth of electronically viable silicon films on inexpensive foreign substrates is studied, with the objective of creating a technology to radically reduce the overall cost of the silicon employed in photovoltaic solar energy conversion. The approach employed is to enhance crystalline ordering during film nucleation by confining arriving silicon atoms to a narrow band traveling across a substrate, i.e., the Lateral Growth Technique (LGT). The efforts have employed physical vapor deposition of silicon in a vacuum evaporator on glass and metal substrates with both slit masks and single defining edges, and subsequent chemical vapor deposition (CVD) of thicker films on these thin film structures by pyrolysis of silane at higher temperatures.

Lindmayer, J.↗

Improved Schottky barrier solar cells

Schottky barrier (SB) solar cells have been fabricated for solar energy conversion using GaAs and GaAs 0.78P0.22. Conversion efficiencies of 9% for air mass zero and 12% for terrestrial sun were observed for antireflection coated GaAs0.78P0.22 SB cells. The corresponding efficiencies for GaAs SB cells were 7% and 10%, respectively. These efficiencies are for cells with no interfacial layer effect. The short circuit current density for GaAs SB cells has been improved. The use of an ellipsometer to determine the optimum antireflection coating parameters is illustrated.

Yeh, Y.-C. M.↗

Studies of silicon p-n junction solar cells

Single crystal silicon p-n junction solar cells made with low resistivity substrates show poorer solar energy conversion efficiency than traditional theory predicts. The physical mechanisms responsible for this discrepancy are identified and characterized. The open circuit voltage in shallow junction cells of about 0.1 ohm/cm substrate resistivity is investigated under AMO (one sun) conditions.

Lindholm, F. A.↗

Critical areas: Satellite power systems concepts

Critical Areas are defined and discussed in the various areas pertinent to satellite power systems. The presentation is grouped into five areas (General, Space Systems, Solar Energy Conversion, Microwave Systems, and Environment/Ecology) with a sixth area (Power Relay) considered separately in an appendix. Areas for Future Consideration as critical areas are discussed in a second appendix.

Source record↗

Survey of quantitative data on the solar energy and its spectra distribution

This paper presents a survey of available quantitative data on the total and spectral solar irradiance at ground level and outside the atmosphere. Measurements from research aircraft have resulted in the currently accepted NASA/ASTM standards of the solar constant and zero air mass solar spectral irradiance. The intrinsic variability of solar energy output and programs currently under way for more precise measurements from spacecraft are discussed. Instrumentation for solar measurements and their reference radiation scales are examined. Insolation data available from the records of weather stations are reviewed for their applicability to solar energy conversion. Two alternate methods of solarimetry are briefly discussed.

Thekaekara, M. P.↗

Hydrogen quantum yields in the 360 nm photolysis of Eu/2+/ solutions and their relationship to photochemical fuel formation

Water decomposition by a cyclic photoredox process is discussed in general terms. Thermodynamics determines the wavelength of the charge-transfer band corresponding to electron transfer to or from water of hydration of a cation. These relationships indicate that it is unlikely that a photoreduction reaction resulting in water decomposition will occur in the sea-level solar range of wavelengths. Such is not the case for photooxidation, and an example is known: the photolysis of Eu(2+) in aqueous solution. Hydrogen quantum yields have been determined for this reaction. They are sufficiently high (about 0.3) as to offer encourangement for the further exploration of photoredox reactions as a means of solar energy conversion.

Ryason, P. R.↗

A low cost high temperature sun tracking solar energy collector

The design and economic evaluation of a low cost high temperature two axis sun tracking solar energy collector are described. The collector design is specifically intended for solar energy use with the freedom of motion about its two control axes being limited only to the amplitude required to track the sun. An examination of the performance criteria required in order to track the sun and perform the desired solar energy conversion is used as the starting point and guide to the design. This factor, along with its general configuration and structural aspect ratios, is the significant contributor to achieving low cost. The unique mechanical design allows the control system to counter wide tolerances that will be specified for the fabrication of the azimuth frame and perform within a small tracking error.

Perkins, G. S.↗

A low cost high temperature sun tracking solar energy collector

The design and economic evaluation of a low cost high temperature two-axis, sun tracking solar energy collector is described. The collector design was specifically intended for solar energy use with the freedom of motion about its two control axes limited only to the amplitude required to track the sun. An examination of the performance criteria required in order to track the sun and perform the desired solar energy conversion was used as the starting point and guide to the design. This factor, along with its general configuration and structural aspect ratios, was the significant contributor to achieving low cost. The unique mechanical design allowed the control system to counter wide tolerances specified for the fabrication of the azimuth frame and to perform within a small tracking error.

Perkins, G. S.↗

The NASA Lewis Research Center program in space solar cell research and technology

Progress in space solar cell research and technology is reported. An 18 percent-AMO-efficient silicon solar cell, reduction in the radiation damage suffered by silicon solar cells in space, and high efficiency wrap-around contact and thin (50 micrometer) coplanar back contact silicon cells are among the topics discussed. Reduction in the cost of silicon cells for space use, cost effective GaAs solar cells, the feasibility of 30 percent AMO solar energy conversion, and reliable encapsulants for space blankets are also considered.

Brandhorst, H. W., Jr.↗

Solar power satellite system definition study. Volume 2, phase 1: Systems analyses tradeoffs.

A systems definition study of the solar power satellite system is presented. The satellite solar energy conversion and microwave power transmission systems are discussed. Space construction and support systems are examined including a series construction and equipment characteristics analysis. Space transportation for the satellite and the ground receiving station are assessed.

Source record↗

Solar power satellite system definition study. Volume 3: Reference system description, phase 1

An analysis of the solar power satellite system is presented. The satellite solar energy conversion and microwave power transmission systems are discussed including the structure, power distribution, thermal control, and energy storage. Space construction and support systems are described including the work support facilities and construction equipment. An assessment of the space transportation system for the satellite and the ground receiving station is presented.

Source record↗

A quinone-assisted photoformation of energy-rich chemical bonds

In a study of biochemical means of solar energy conversion, ADP and inorganic phosphates were converted to ATP by white light in the nonaqueous solvent dimethylformamide in the presence of tetrachloro-p-quinone or ubiquinone. Conversion of ADP to ATP has been accomplished in aqueous suspension by the use of cell-like structures aggregated from poly(aspartic acid, glutamic acid, tyrosine). This is believed to occur through the formation of dopaquinone in the peptide structure during illumination. The way in which the quantitative yield of ATP has been influenced by pH and by added substances, such as FeCl2, was studied.

Fox, S. W.↗

An overview on European SPS activities

The organization of space and energy research in Europe is discussed. The European situation is highlighted with emphasis on the dependency of energy imports and on the energy requirements of Europe. The status of SPS research in the countries that form the European Space Agency was reviewed. It is concluded that in view of the unfavorable geographical and climatic situation of large parts of Europe, terrestrial solar energy conversion is unlikely to make a significant contribution to Europe's future energy supply. Thus, SPS development is of special interest to the European community.

Reinhartz, K. K.↗

Unconventional processes for food regeneration in space - An overview

Alternatives to conventional plant agriculture for the regeneration of food during space missions of extended duration are examined. The options considered, which may be used in combination with conventional agriculture, include the production of food from plant wastes, the chemical synthesis of food from carbon dioxide and other simple molecules or the substitution of edible chemicals, and the use of microrganisms for food and oxygen regeneration, with suitable processing. A comparison of solar energy conversion efficiencies is presented for nonphotosynthetic bacteria grown on hydrogen and algal systems photosynthetically, and it is shown that hydrogen bacteria are potentially more attractive than photosynthetic algae using artificial light. Weight-volume requirements for the conventional plant, algae and hydrogen bacteria systems are also compared to demonstrate the advantages of microbial systems.

Stokes, B. O.↗

Assessing solar energy and water use efficiencies in winter wheat

The water use and solar energy conversion efficiencies of two cultivars of winter wheat (Triticum aestivum L., vars, Centurk and Newton) planted at three densities, were examined during a growing season. Water use, based on soil moisture depletion, was the lowest under the light, and the highest under the heavy planting densities of both cultivars. Water use efficiency of medium and heavy planting densities were greater than the light planting densities in both cultivars. The canopy radiation extinction coefficients of both cultivars increased with increases in planting density. Efficiency of operation interception of photosynthetically active radiation by both cultivars improved from the time of jointing until anthesis, and then decreased during senescence. The efficiency of the conversion of intercepted radiation to dry matter (biochemical efficiency) decreased throughout the growing season both cultivars. The interception, biochemical, and photosynthetic efficiencies improved as planting density increased.

Asrar, G.↗

Advanced module development overview

Crystalline silicon solar power modules are examined for reliability and cost effectiveness. A goal of 12% solar energy conversion efficiency is considered feasible at a cost of 12/kWh, and a decision is made to limit consideration to float zone silicon wafer and dendritic web silicone modules. A preliminary module packaging configuration of glass/ethylene vinyl acetate/plastic film is selected. Anticipated module efficiency levels are 12.6% at 25 C and 11.5% at NOCT (Nominal Operating Cell Temperature).

Smokler, M. I.↗