Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Snow water equivalent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Mountain Basin Controls on the Snow-to-Streamflow Signal: An AIC-Weighted Multiple Linear Regression Framework

A regression-based analysis quantifies how basin characteristics modulate the snow-to-streamflow signal. First, we use the ERA5-Land reanalysis gridded product (European Centre for Medium Range Weather Forecasts reanalysis 5 -Land component) for 4,655 hydrologic unit code - 10 (HUC10) mountain basins across the western United States (US) for water years 1987–2024. Linear regressions are performed for peak snow water equivalent (SWE) and annual streamflow for each mountain basin. Models use ordinary least squares in Python’s statsmodels package. After which, an Akaike Information Criterion (AIC)–weighted ensemble multiple linear regression (MLR) framework with 47 watershed traits is used to predict the linear regression coefficient of determination (r-squared) defining the ability of peak SWE to predict annual streamflow across all mountain basin. Predictor sets are constrained to avoid multicollinearity by excluding models with variance inflation factors (VIF) greater than 5. Mountain basin traits included in the MLR include seasonal climate, topography, vegetation type and structure, and bedrock geology. Accepted models are considered if their AIC is within 2.0 of the model with the minimum AIC, or best model. To compare predictor influence across acceptable models, we computed standardized regression coefficients. To evaluate structural redundancy among models, we constructed binary inclusion vectors for each acceptable model, denoting whether a predictor was present (1) or absent (0). Core predictor variables are defined as occurring in at least 67% of the acceptable models. For this regional analysis, only one model was found acceptable, with higher snow-to-streamflow translation (higher r-squared) occurring in colder mountain basins with higher relative winter precipitation, more snow accumulation and a lower fraction of annual precipitation that falls in the spring and summer. The second component of the data package uses previously published, high-resolution output from an integrated hydrological model of the East River watershed using the U.S. Geological Survey Groundwater and Surface water Flow model (GSFLOW, doi:10.15485/1998576). East River MLR expands upon the approach described above to explore the response of five streamflow metrics—annual streamflow, runoff efficiency, 7-day minimum flow, low-flow duration, and non-perennial stream fraction to snow system indicators including peak SWE, snow-covered area, snow disappearance date, and the fraction of basin area characterized by low-to-no snow, as well as seasonal precipitation and temperature, and annual hydrologic variables representing soil moisture, evapotranspiration (ET), the partitioning of incoming precipitation to evapotranspiration (ET/P), groundwater storage, and groundwater inflow to streams. MLR was done on all water years (P0: 1987-2024) and for each period as determined in the split analysis using pooled regression techniques (P1: 1987-2011 and P2: 2012-2024) to evaluate shifting predictor variable emphasis on streamflow generation. Results indicate that since 2012, peak SWE has lost statistical strength in its prediction of annual streamflow and runoff efficiency, and the indirect influence of spring temperature has emerged as critically important. Low-flow metrics remain largely influenced by soil moisture, vegetation water use and groundwater inflows with summer precipitation becoming a direct influence on minimum summer flow. Together, these data and Python-based analysis tools provide a framework for identifying the key watershed characteristics that control how streamflow responds to snow from year to year. The package also helps quantify uncertainty in statistical models and assess how snow–streamflow relationships vary across regions and over time. This dataset contains comma-separated values files (.csv), text files (.txt), python code files (.py), figure files (.png), and shapefiles (.cpg, .dbf, .prj, .sbn, .sbx, .shp, .xml). Further details on file contents and MLR execution can be found in the readme file and the FLMD files. Work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

54 ENVIRONMENTAL SCIENCES↗

The DMRT-ML Model: Numerical Simulations of the Microwave Emission of Snowpacks Based on the Dense Media Radiative Transfer Theory

Microwave radiometer observations have been used to retrieve snow depth and snow water equivalent on both land and sea ice, snow accumulation on ice sheets, melt events, snow temperature, and snow grain size. Modeling the microwave emission from snow and ice physical properties is crucial to improve the quality of these retrievals. It also is crucial to improve our understanding of the radiative transfer processes within the snow cover, and the snow properties most relevant in microwave remote sensing. Our objective is to present a recent microwave emission model and its validation. The model is named DMRT-ML (DMRT Multi-Layer).

Microwave radiometer↗

The DMRT-ML Model: Numerical Simulations of the Microwave Emission of Snowpacks Based on the Dense Media Radiative Transfer Theory

Microwave radiometer observations have been used to retrieve snow depth and snow water equivalent on both land and sea ice, snow accumulation on ice sheets, melt events, snow temperature, and snow grain size. Modeling the microwave emission from snow and ice physical properties is crucial to improve the quality of these retrievals. It also is crucial to improve our understanding of the radiative transfer processes within the snow cover, and the snow properties most relevant in microwave remote sensing. Our objective is to present a recent microwave emission model and its validation. The model is named DMRT-ML (DMRT Multi-Layer), and is available at http:lgge.osug.frpicarddmrtml.

ice sheet↗

Deriving Snow-Cover Depletion Curves for Different Spatial Scales from Remote Sensing and Snow Telemetry Data

During the melting of a snowpack, snow water equivalent (SWE) can be correlated to snow-covered area (SCA) once snow-free areas appear, which is when SCA begins to decrease below 100%. This amount of SWE is called the threshold SWE. Daily SWE data from snow telemetry stations were related to SCA derived from moderate-resolution imaging spectro radiometer images to produce snow-cover depletion curves. The snow depletion curves were created for an 80,000 sq km domain across southern Wyoming and northern Colorado encompassing 54 snow telemetry stations. Eight yearly snow depletion curves were compared, and it is shown that the slope of each is a function of the amount of snow received. Snow-cover depletion curves were also derived for all the individual stations, for which the threshold SWE could be estimated from peak SWE and the topography around each station. A stations peak SWE was much more important than the main topographic variables that included location, elevation, slope, and modelled clear sky solar radiation. The threshold SWE mostly illustrated inter-annual consistency.

snow depletion curves↗

Estimating Terrestrial Snow Mass via Multi-sensor Assimilation of Synthetic AMSR-E Brightness Temperature Spectral Differences and Synthetic GRACE Terrestrial Water Storage Retrievals

This study explores multi-sensor data assimilation (DA) using synthetic Advanced Microwave Scanning Radiometer (AMSR-E) passive microwave brightness temperature spectral differences (∆T(B)) and synthetic Gravity Recovery and Climate Experiment (GRACE) terrestrial water storage (TWS) retrievals to improve estimates of snow water equivalent (SWE), subsurface water storage, and TWS across snow-covered terrain. Results show that multi-sensor DA improves SWE estimates by reducing the RMSE by 14.1% relative to a model-only simulation. Multi-sensor assimilation also yields the smallest TWS RMSE (reduced by 13.0% relative to a model-only simulation). However, multi-sensor DA does not always yield complementary updates, and can sometimes lead to conflicting changes to SWE, where the assimilation of synthetic ∆T(b) generates positive SWE increments while the assimilation of synthetic TWS removes SWE, which can ultimately degrade the posterior SWE estimates. This synthetic experiment provides useful insight for future DA experiments using real-world AMSR-E/AMSR-2 ∆T(b) observations and GRACE/GRACE-FO TWS retrievals to better characterize terrestrial freshwater storage across regional scales.

Jing Wang↗

Development and Evaluation of a Cloud-Gap-Filled MODIS Daily Snow-Cover Product

The utility of the Moderate Resolution Imaging Spectroradiometer (MODIS) snow-cover products is limited by cloud cover which causes gaps in the daily snow-cover map products. We describe a cloud-gap-filled (CGF) daily snowcover map using a simple algorithm to track cloud persistence, to account for the uncertainty created by the age of the snow observation. Developed from the 0.050 resolution climate-modeling grid daily snow-cover product, MOD10C1, each grid cell of the CGF map provides a cloud-persistence count (CPC) that tells whether the current or a prior day was used to make the snow decision. Percentage of grid cells "observable" is shown to increase dramatically when prior days are considered. The effectiveness of the CGF product is evaluated by conducting a suite of data assimilation experiments using the community Noah land surface model in the NASA Land Information System (LIS) framework. The Noah model forecasts of snow conditions, such as snow-water equivalent (SWE), are updated based on the observations of snow cover which are obtained either from the MOD1 OC1 standard product or the new CGF product. The assimilation integrations using the CGF maps provide domain averaged bias improvement of -11 %, whereas such improvement using the standard MOD1 OC1 maps is -3%. These improvements suggest that the Noah model underestimates SWE and snow depth fields, and that the assimilation integrations contribute to correcting this systematic error. We conclude that the gap-filling strategy is an effective approach for increasing cloud-free observations of snow cover.

Hall, Dorothy K.↗

Systematic Evaluation of Atmospheric Forcing, Surface Datasets, and Mesh Effects on Kilometer-Scale Land Surface and River Modeling

Earth system models are advancing toward kilometer-scale resolution to capture local climate impacts and extremes. High-resolution land and river modeling depends on multiple factors, including mesh, surface datasets, and atmospheric forcing, but their relative effects at kilometer scales remain unquantified. We evaluated five Energy Exascale Earth System Model land and river configurations over the Mid-Atlantic region using two mesh (1/8° structured versus variable-resolution unstructured mesh), two surface datasets (default versus newly developed), and three atmospheric forcings (NLDAS2, MSWX, GSWP). Evaluation against satellite, reanalysis, and in situ benchmarks across water, energy, and carbon cycles quantifies how these factors affect model performance. Forcing selection produces the largest bias reductions (12-99% across variables), followed by surface datasets (7-75%) and mesh (up to 21%). Forcing effects vary by variable, with MSWX reducing biases for snow water equivalent, evapotranspiration, albedo, temperature, and gross primary productivity, GSWP for snow cover and runoff, and NLDAS for soil moisture and streamflow. The use of newly developed surface datasets improves gross primary productivity (58% bias reduction) and evapotranspiration but increase soil moisture and albedo biases due to current modeling limitations. Variable-resolution unstructured mesh improves the simulation of small-basin streamflow through better capturing drainage networks, though mesh minimally affects other land variables. These findings provide important guidance for high-resolution modeling development and actionable science.

Land and River modeling↗

A Blended Global Snow Product using Visible, Passive Microwave and Scatterometer Satellite Data

A joint U.S. Air Force/NASA blended, global snow product that utilizes Earth Observation System (EOS) Moderate Resolution Imaging Spectroradiometer (MODIS), Advanced Microwave Scanning Radiometer for EOS (AMSR-E) and QuikSCAT (Quick Scatterometer) (QSCAT) data has been developed. Existing snow products derived from these sensors have been blended into a single, global, daily, user-friendly product by employing a newly-developed Air Force Weather Agency (AFWA)/National Aeronautics and Space Administration (NASA) Snow Algorithm (ANSA). This initial blended-snow product uses minimal modeling to expeditiously yield improved snow products, which include snow cover extent, fractional snow cover, snow water equivalent (SWE), onset of snowmelt, and identification of actively melting snow cover. The blended snow products are currently 25-km resolution. These products are validated with data from the lower Great Lakes region of the U.S., from Colorado during the Cold Lands Processes Experiment (CLPX), and from Finland. The AMSR-E product is especially useful in detecting snow through clouds; however, passive microwave data miss snow in those regions where the snow cover is thin, along the margins of the continental snowline, and on the lee side of the Rocky Mountains, for instance. In these regions, the MODIS product can map shallow snow cover under cloud-free conditions. The confidence for mapping snow cover extent is greater with the MODIS product than with the microwave product when cloud-free MODIS observations are available. Therefore, the MODIS product is used as the default for detecting snow cover. The passive microwave product is used as the default only in those areas where MODIS data are not applicable due to the presence of clouds and darkness. The AMSR-E snow product is used in association with the difference between ascending and descending satellite passes or Diurnal Amplitude Variations (DAV) to detect the onset of melt, and a QSCAT product will be used to map areas of snow that are actively melting.

Foster, James L.↗

Finland Validation of the New Blended Snow Product

As part of an ongoing effort to validate satellite remote sensing snow products for the recentlydeveloped U.S. Air Force Weather Agency (AFWA) - NASA blended snow product, Satellite and in-situ data for snow extent and snow water equivalent (SWE) are evaluated in Finland for the 2006-2007 snow season Finnish Meteorological Institute (FMI) daily weather station data and Finnish Environment Institute (SYKE) bi-monthly snow course data are used as ground truth. Initial comparison results display positive agreement between the AFWA NASA Snow Algorithm (ANSA) snow extent and SWE maps and in situ data, with discrepancies in accordance with known AMSR-E and MODIS snow mapping limitations. Future ANSA product improvement plans include additional validation and inclusion of fractional snow cover in the ANSA data product. Furthermore, the AMSR-E 19 GHz (horizontal channel) with the difference between ascending and descending satellite passes (Diurnal Amplitude Variations, DAV) will be used to detect the onset of melt, and QuikSCAT scatterometer data (14 GHz) will be used to map areas of actively melting snow.

Kim, E. J.↗

The Various Influences due to Aerosol Depositions

Recently the issue on glacier retreats comes up and many factors should be relevant to the issue. The absorbing aerosols such as dust and black carbon (BC) are considered to be one of the factors. After they deposited onto the snow surface, it will reduce snow albedo (called snow darkening effect) and probably contribute to further melting of glacier. The Goddard Earth Observing System version 5 (GEOS-5) has developed at NASA/GSFC. However, the original snowpack model used in the land surface model in the GEOS-5 did not consider the snow darkening effect. Here we developed the new snow albedo scheme which can consider the snow darkening effect. In addition, another scheme on calculating mass concentrations on the absorbing aerosols in snowpack was also developed, in which the direct aerosol depositions from the chemical transport model in the GEOS-5 were used. The scheme has been validated with the observed data obtained at backyard of the Institute of Low Temperature Science, Hokkaido University, by Dr. Teruo Aoki (Meteorological Research Institute) et al. including me. The observed data was obtained when I was Ph.D.caftdidate. The original GEOS-5 during 2007-2009 over the Himalayas and Tibetan Plateau region showed more reductions of snow than that of the new GEOS-5 because the original one used lower albedo settings. On snow cover fraction, the new GEOS-5 simulated more realistic snow-covered area comparing to the MODIS snow cover fraction. The reductions on snow albedo, snow cover fraction, and snow water equivalent were seen with statistically significance if we consider the snow darkening effect comparing to the results without the snow darkening effect. In the real world, debris cover, inside refreezing process, surface flow of glacier, etc. affect glacier mass balance and the simulated results immediately do not affect whole glacier retreating. However, our results indicate that some surface melting over non debris covered parts of the glacier would be explained by the snow darkening effect. Further discussion and observations are necessary to assess the glacier issue.

Yasunari, Teppei↗

Incorporation of the Mass Concentration and the New Snow Albedo Schemes into the Global Forecasting Model, GEOS-5 and the Impact of the New Schemes over Himalayan Glaciers

Recently the issue on glacier retreats comes up and many factors should be relevant to the issue. The absorbing aerosols such as dust and black carbon (BC) are considered to be one of the factors. After they deposited onto the snow surface, it will reduce snow albedo (called snow darkening effect) and probably contribute to further melting of glacier. The Goddard Earth Observing System version 5 (GEOS-5) has developed at NASA/GSFC. However, the original snowpack model used in the land surface model in the GEOS-5 did not consider the snow darkening effect. Here we developed the new snow albedo scheme which can consider the snow darkening effect. In addition, another scheme on calculating mass concentrations on the absorbing aerosols in snowpack was also developed, in which the direct aerosol depositions from the chemical transport model in the GEOS-5 were used. The scheme has been validated with the observed data obtained at backyard of the Institute of Low Temperature Science, Hokkaido University, by Dr. Teruo Aoki (Meteorological Research Institute) et aL including me. The observed data was obtained when I was Ph.D. candidate. The original GEOS-5during 2007-2009 over the Himalayas and Tibetan Plateau region showed more reductions of snow than that of the new GEOS-5 because the original one used lower albedo settings. On snow cover fraction, the new GEOS-5 simulated more realistic snow-covered area comparing to the MODIS snow cover fraction. The reductions on snow albedo, snow cover fraction, and snow water equivalent were seen with statistically significance if we consider the snow darkening effect comparing to the results without the snow darkening effect. In the real world, debris cover, inside refreezing process, surface flow of glacier, etc. affect glacier mass balance and the simulated results immediately do not affect whole glacier retreating. However, our results indicate that some surface melting over non debris covered parts of the glacier would be explained by the snow darkening effect. Further discussion and observations are necessary to assess the glacier issue.

Yasunari, Teppei↗

The Studies on Aerosol Transport, Its Deposition, and Its Impact on Climate - the Study on the Surface Material Circulation can Connect from the Past to the Future

Recently the issue on glacier retreats comes up and many factors should be relevant to the issue. The absorbing aerosols such as dust and black carbon (BC) are considered to be one of the factors. After they deposited onto the snow surface, it will reduce snow albedo (called snow darkening effect) and probably contribute to further melting of glacier. The Goddard Earth Observing System version 5 (GEOS-5) has developed at NASAlGSFC. However, the original snowpack model used in the land surface model in the GEOS-5 did not consider the snow darkening effect. Here we developed the new snow albedo scheme which can consider the snow darkening effect. In addition, another scheme on calculating mass concentrations on the absorbing aerosols in snowpack was also developed, in which the direct aerosol depositions from the chemical transport model in the GEOS-5 were used. The scheme has been validated with the observed data obtained at backyard of the Institute of Low Temperature Science, Hokkaido University, by Dr. Teruo Aoki (Meteorological Research Institute) et al. including me. The observed data was obtained when I was Ph.D. candidate. The original GEOS-5 during 2007-2009 over the Himalayas and Tibetan Plateau region showed more reductions of snow than that of the new GEOS-5 because the original one used lower albedo settings. On snow cover fraction, the new GEOS-5 simulated more realistic snow-covered area comparing to the MODIS snow cover fraction. The reductions on snow albedo, snow cover fraction, and snow water equivalent were seen with statistically significance if we consider the snow darkening effect comparing to the results without the snow darkening effect. In the real world, debris-cover, inside refreezing process, surface flow of lacier, etc. affect glacier mass balance and the simu.latedresults immediately do not affect whole glacier retreating. However, our results indicate that some surface melting over non debris-covered parts of the glacier would be explained by the snow darkening effect. Further discussion and observations are necessary to assess the glacier issue.

Yasunari, Teppei↗

Design of an 8-40 GHz Antenna for the Wideband Instrument for Snow Measurements (WISM)

Measurement of land surface snow remains a significant challenge in the remote sensing arena. Developing the tools needed to remotely measure Snow Water Equivalent (SWE) is an important priority. The Wideband Instrument for Snow Measurements (WISM) is being developed to address this need. WISM is an airborne instrument comprised of a dual-frequency (X- and Ku-bands) Synthetic Aperture Radar (SAR) and dual-frequency (K- and Ka-bands) radiometer. A unique feature of this instrument is that all measurement bands share a common antenna aperture consisting of an array feed reflector that covers the entire bandwidth. This paper covers the design and fabrication of the wideband array feed which is based on tightly coupled dipole arrays. Implementation using a relatively new multi-layer microfabrication process results in a small, 6x6 element, dual-linear polarized array with beamformer that operates from 8 to 40 gigahertz.

8-40 GHz↗

Analysis of Terrestrial Water Storage Changes from GRACE and GLDAS

Since March 2002, the Gravity Recovery and Climate Experiment (GRACE) has provided first estimates of land water storage variations by monitoring the time-variable component of Earth's gravity field. Here we characterize spatial-temporal variations in terrestrial water storage changes (TWSC) from GRACE and compare them to those simulated with the Global Land Data Assimilation System (GLDAS). Additionally, we use GLDAS simulations to infer how TWSC is partitioned into snow, canopy water and soil water components, and to understand how variations in the hydrologic fluxes act to enhance or dissipate the stores. Results quantify the range of GRACE-derived storage changes during the studied period and place them in the context of seasonal variations in global climate and hydrologic extremes including drought and flood, by impacting land memory processes. The role of the largest continental river basins as major locations for freshwater redistribution is highlighted. GRACE-based storage changes are in good agreement with those obtained from GLDAS simulations. Analysis of GLDAS-simulated TWSC illustrates several key characteristics of spatial and temporal land water storage variations. Global averages of TWSC were partitioned nearly equally between soil moisture and snow water equivalent, while zonal averages of TWSC revealed the importance of soil moisture storage at low latitudes and snow storage at high latitudes. Evapotranspiration plays a key role in dissipating globally averaged terrestrial water storage. Latitudinal averages showed how precipitation dominates TWSC variations in the tropics, evapotranspiration is most effective in the midlatitudes, and snowmelt runoff is a key dissipating flux at high latitudes. Results have implications for monitoring water storage response to climate variability and change, and for constraining land model hydrology simulations.

Syed, Tajdarul H.↗

Snow Distribution Patterns Revisited: A Physics-Based and Machine Learning Hybrid Approach to Snow Distribution Mapping in the Sub-Arctic

Snowpack distribution in Arctic and alpine landscapes often occurs in repeating, year-to-year patterns due to local topographic, weather, and vegetation characteristics. Previous studies have suggested that with years of observational data, these snow distribution patterns can be statistically integrated into a snow process modeling workflow. Recent advances in snow hydrology and machine learning (ML) have increased our ability to predict snowpack distribution using in-situ observations, remote sensing data sets, and simple landscape characteristics that can be easily obtained for most environments. Here, we propose a hybrid approach to couple a ML snow distribution pattern (MLSDP) map with a physics-based, snow process model. We trained a random forest ML algorithm on tens of thousands of snow survey observations from a subarctic study area on the Seward Peninsula, Alaska, collected during peak snow water equivalent (SWE). We validated hybrid model outputs using in-situ snow depth and SWE observations, as well as a light detection and ranging data set and a distributed temperature profiling sensor data set. When the hybrid results were compared with the physics-based method, the hybrid method more accurately depicted the spatial patterns of the snowpack, areas of drifting snow, and years when no in-situ observations were used in the random forest ML training data set. The hybrid method also showed improvements in root mean squared error at 61% of locations where time-series estimations of snow depth were observed. These results can be applied to any physics-based model to improve the snow distribution patterning to reflect observed conditions in high latitude and high elevation cold region environments.

54 ENVIRONMENTAL SCIENCES↗

Snow Parameters Derived from Microwave Measurements During the BOREAS Winter Field Campaign

Passive microwave data have been used to infer the snow-covered area and snow water equivalent (SWE) over forested areas, but the accuracy of these retrieved snow parameters cannot be easily validated for heterogeneous vegetated regions. The Boreal Ecosystem-Atmosphere Study Winter Field Campaign provided the opportunity to study the effect of boreal forests on snow parameter retrieval in detail. Microwave radiometers (18, 37, and 92 GHz) were flown on board the Canadian National Aeronautical Establishment's Twin Otter. Flight lines covered both the southern study area near Prince Albert and the northern study area near Thompson, Canada. During the 1994 winter campaign, extensive ground-based snow cover information, including depth, density, and grain size, was collected along most of the flight lines, jointly by U.S. and Canadian investigators. Satellite data collected by the special sensor microwave imager are also used for comparison. Preliminary results reconfirmed the relationship between microwave brightness temperature and SWE. However, the effect of forest cover observed by the aircraft sensors is different from that of the satellite observations. This is probably due to the difference in footprint averaging. There were also several flight lines flown over Candle Lake and Waskesiu Lake to assess lake ice signatures. Preliminary results show the thickness of the lake ice may be inferred from the airborne microwave observations. The microwave signature relationship between lake ice and snow matches the results from radiative transfer calculations.

Chang, A. T. C.↗

A New Operational Snow Retrieval Algorithm Applied to Historical AMSR-E Brightness Temperatures

Snow is a key element of the water and energy cycles and the knowledge of spatio-temporal distribution of snow depth and snow water equivalent (SWE) is fundamental for hydrological and climatological applications. SWE and snow depth estimates can be obtained from spaceborne microwave brightness temperatures at global scale and high temporal resolution (daily). In this regard, the data recorded by the Advanced Microwave Scanning Radiometer-Earth Orbiting System (EOS) (AMSR-E) onboard the National Aeronautics and Space Administration's (NASA) AQUA spacecraft have been used to generate operational estimates of SWE and snow depth, complementing estimates generated with other microwave sensors flying on other platforms. In this study, we report the results concerning the development and assessment of a new operational algorithm applied to historical AMSR-E data. The new algorithm here proposed makes use of climatological data, electromagnetic modeling and artificial neural networks for estimating snow depth as well as a spatio-temporal dynamic density scheme to convert snow depth to SWE. The outputs of the new algorithm are compared with those of the current AMSR-E operational algorithm as well as in-situ measurements and other operational snow products, specifically the Canadian Meteorological Center (CMC) and GlobSnow datasets. Our results show that the AMSR-E algorithm here proposed generally performs better than the operational one and addresses some major issues identified in the spatial distribution of snow depth fields associated with the evolution of effective grain size.

passive microwave↗

Representing Fine‐Scale Topographic Effects on Surface Radiation Balance in Hyper‐Resolution Land Surface Models

Land surface models are increasingly used to simulate land surface processes at hyper-spatial resolutions (e.g., ∼1 km). As model resolution increases, grid-scale topographic effects on surface radiation fluxes and their interactions between adjacent grids become more pronounced. However, current land surface models routinely neglect the fine-scale topographic effects on surface radiation balance. This study developed physically-based and computationally-efficient parameterizations (fineTOP) that explicitly resolve fine-scale topographic effects on downward shortwave and longwave radiation as well as land surface radiative properties. The newly developed parameterizations were implemented and tested in the Energy Exascale Earth System Model (E3SM) Land Model (ELM). Multi-decadal km-resolution ELM simulations over the California Sierra Nevada show that fine-scale topography significantly impacts the surface energy balance and snow processes across seasons. Slope determines the magnitude of topographic effects, while aspect controls their sign. For slopes larger than 30°, topography-induced change in annual surface temperature can be as large as 3.3 K. Regionally, the mean value and standard deviation of topography-induced changes in annual surface temperature are −0.22 ± 0.38 K and +0.25 ± 0.37 K over north-facing and south-facing slopes, respectively. Topography-induced changes in surface radiative properties account for 3.5% ± 13.8% of total topographic effects on annual net radiation. With fineTOP, ELM captures the aspect-dependence of snow cover fraction, snow water equivalent, and land surface temperature found in MODIS satellite observations and a snow reanalysis data set, while the default ELM fails to capture this phenomenon. The enhanced capability to represent fine-scale topographic effects on surface radiation balance can be used to advance understanding of the role of fine-scale topography in land surface processes and land-atmosphere interactions over mountainous regions.

Hao, Dalei [Pacific Northwest National Laboratory ↗