Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shell Growth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Damage Tolerance of Large Shell Structures

Progressive damage and fracture of large shell structures is investigated. A computer model is used for the assessment of structural response, progressive fracture resistance, and defect/damage tolerance characteristics. Critical locations of a stiffened conical shell segment are identified. Defective and defect-free computer models are simulated to evaluate structural damage/defect tolerance. Safe pressurization levels are assessed for the retention of structural integrity at the presence of damage/ defects. Damage initiation, growth, accumulation, and propagation to fracture are included in the simulations. Damage propagation and burst pressures for defective and defect-free shells are compared to evaluate damage tolerance. Design implications with regard to defect and damage tolerance of a large steel pressure vessel are examined.

Minnetyan, L.↗
NASA NTRS1984

The depletion of pre-interstellar matter and an examination of Ni II oscillator strengths

IUE absorption-line data obtained at 110-320 nm with resolution 10-30 pm toward the B-star component of the multiple system of Alpha Sco are presented in graphs and tables and used to characterize the circumstellar shell around the M1.5 Iab component. Resonant lines of Ni II are identified at strengths in excess of 4 pm and fit to a growth curve constructed using the Fe II, Si II, and Mn II lines, and the results are found to confirm the oscillator strengths determined by Kurucz and Peytremann (1975) to within 50 percent. Shell depletions 2-20 times smaller than those for dense clouds such as the surrounding Oph complex are calculated and attributed to the formation of circumstellar dust. The implications of the results for the condensation of various elements in dense and diffuse clouds are explored.

Cardelli, J. A.↗
DOE OSTI2024

An extended variational method for the resistive wall mode in toroidal plasma confinement devices

The external-kink stability of a toroidal plasma surrounded by a rigid resistive wall is investigated. The well-known analysis of Haney and Freidberg is rigorously extended to allow for a wall that is sufficiently thick that the thin-shell approximation does not necessarily hold. A generalized Haney–Freidberg formula for the growth-rate of the resistive wall mode is obtained. Thick-wall effects do not change the marginal stability point of the mode but introduce an interesting asymmetry between growing and decaying modes. Growing modes have growth-rates that exceed those predicted by the original Haney–Freidberg formula. On the other hand, decaying modes have decay-rates that are less than those predicted by the original formula. The well-known Hu–Betti formula for the rotational stabilization of the resistive wall mode is also generalized to take thick-wall effects into account. Increasing wall thickness facilitates the rotational stabilization of the mode, because it decreases the critical toroidal electromagnetic torque that the wall must exert on the plasma. On the other hand, the real frequency of the mode at the marginal stability point increases with increasing wall thickness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1982

Radiative transfer in realistic planetary atmospheres

Some 40 publications that appeared in scientific journals from 1973 to 1981 as well as 45 scientific reports issued during the grant period are listed by title. Topics cover the development of a matrix operator theory of radiative transfer which made possible the exact model calculations of the radiance as a function of height in planetary atmospheres; calculation of the Mie phase matrix for various types of particles as well as for radiance and polarization in planetary atmospheres; analysis of high dispersion spectroscopic observations of Venus; calculation of curves of growth for Venus; the development of a theory for calculating radiative transfer in spherical shell atmospheres; investigations of zonal winds on Venus; and examination of Rayleigh scattering.

Plass, G. N.↗
NASA NTRS1989

Trapped-particle evacuation - Source of magnetotail bursts and tailward flows?

Observational and theoretical evidence that the polar cap can expand rapidly enough during the growth phase of a substorm to release geomagnetically trapped particles from previously closed drift shells, enabling the particles to escape into the tail, are examined. Observations show that the moving separatrix can overtake convecting nightside plasma during intervals of polar-cap expansion. Models of this phenomenon suggest that closed nightside field lines can be evaculated of their particle populations, and it is noted that such evacuations can account for the occurrence of energetic-particle bursts in the tail.

Lyons, L. R.↗
NASA NTRS1992

Design for progressive fracture in composite shell structures

The load carrying capability and structural behavior of composite shell structures and stiffened curved panels are investigated to provide accurate early design loads. An integrated computer code is utilized for the computational simulation of composite structural degradation under practical loading for realistic design. Damage initiation, growth, accumulation, and propagation to structural fracture are included in the simulation. Progressive fracture investigations providing design insight for several classes of composite shells are presented. Results demonstrate the significance of local defects, interfacial regions, and stress concentrations on the structural durability of composite shells.

Minnetyan, Levon↗
DOE OSTI2026

Sequential surface synthesis of dispersed sub-nanometer iridium on titanium nitride for acidic water oxidation

Maximizing iridium utilization while maintaining high oxygen evolution reaction (OER) performance remains a persistent challenge in acidic water electrolysis. Immobilizing Ir on conductive, acid-stable supports is promising, yet simultaneously achieving sub-nanometer size, high area coverage, and strong electronic coupling is difficult. Here, we report a sequential surface synthesis on titanium nitride (TiN) that yields uniformly distributed sub-nanometer Ir arrays (∼0.7 nm). Our method uses ethylenediaminetetraacetic acid (EDTA) as a temporal scaffold: it chemisorbs to TiN to install dense chelating sites, captures Ir 3+ ions, and confines Ir cluster growth. A subsequent thermal treatment at 500 °C in a reducing atmosphere removes the ligand shell, while preserving ultrasmall particle size and establishing direct Ir–TiN electronic coupling. The optimized catalyst exhibits mixed Ir 0 /Ir x+ coordination with low charge-transfer resistance (R ct = 19.2 Ω), delivering a mass activity of 342 A g Ir −1 at 1.54 V in acidic electrolyte. In situ X-ray absorption spectroscopy reveals irreversible surface oxidation as the primary stability-limiting factor. This stepwise strategy provides a general framework for supported catalysts that maximize precious metal utilization via sub-nanometer dispersion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1974

A discussion of Sortie Lab structural subsystem trade studies

The first trade study discussed is a structural sizing and resultant weight comparison between a 3.66 m diameter and a 3.94 m diameter pressurized shell. Results of this trade are presented, indicating the structural areas of weight reduction and growth. The orbiter payload support techniques are discussed, evaluating the advantages and disadvantages. A comparison of various techniques using the system is presented, along with resulting weight comparisons. A preliminary assessment of Sortie Lab natural frequencies and mode shapes is also presented and discussed. In conclusion, an assessment of the Sortie Lab weight related to structural design factor of safety and a discussion of a possible structural test program associated with increased design factors of safety is presented.

Schock, R. W.↗
NASA NTRS1989

Tissue simulating gel for medical research

A tissue simulating gel and a method for preparing the tissue simulating gel are disclosed. The tissue simulating gel is prepared by a process using water, gelatin, ethylene gylcol, and a cross-linking agent. In order to closely approximate the characteristics of the type of tissue being simulated, other material has been added to change the electrical, sound conducting, and wave scattering properties of the tissue simulating gel. The result of the entire process is a formulation that will not melt at the elevated temperatures involved in hyperthermia medical research. Furthermore, the tissue simulating gel will not support mold or bacterial growth, is of a sufficient mechanical strength to maintain a desired shape without a supporting shell, and is non-hardening and non-drying. Substances were injected into the tissue simulating gel prior to the setting-up thereof just as they could be injected into actual tissue, and the tissue simulating gel is translucent so as to permit visual inspection of its interior. A polyurethane spray often used for coating circuit boards can be applied to the surface of the tissue simulating gel to give a texture similar to human skin, making the tissue simulating gel easier to handle and contributing to its longevity.

Companion, John A.↗
NASA NTRS1991

Tissue simulating gel for medical research

A tissue simulating gel and a method for preparing the tissue simulating gel are disclosed. The tissue simulating gel is prepared by a process using water, gelatin, ethylene glycol, and a cross-linking agent. In order to closely approximate the characteristics of the type of tissue being simulated, other material has been added to change the electrical, sound conducting, and wave scattering properties of the tissue simulating gel. The result of the entire process is a formulation that will not melt at the elevated temperatures involved in hyperthermia medical research. Furthermore, the tissue simulating gel will not support mold or bacterial growth, is of a sufficient mechanical strength to maintain a desired shape without a supporting shell, and is non-hardening and non-drying. Substances have been injected into the tissue simulating gel prior to the setting-up thereof just as they could be injected into actual tissue, and the tissue simulating gel is translucent so as to permit visual inspection of its interior. A polyurethane spray often used for coating circuit boards can be applied to the surface of the tissue simulating gel to give a texture similar to human skin, making the tissue simulating gel easier to handle and contributing to its longevity.

Companion, John A.↗
NASA NTRS1996

Progressive Fracture of Fiber Composite Thin Shell Structures Under Internal Pressure and Axial Loads

Graphite/epoxy composite thin shell structures were simulated to investigate damage and fracture progression due to internal pressure and axial loading. Defective and defect-free structures (thin cylinders) were examined. The three different laminates examined had fiber orientations of (90/0/+/-0)(sub s), where 0 is 45, 60, and 75 deg. CODSTRAN, an integrated computer code that scales up constituent level properties to the structural level and accounts for all possible failure modes, was used to simulate composite degradation under loading. Damage initiation, growth, accumulation, and propagation to fracture were included in the simulation. Burst pressures for defective and defect-free shells were compared to evaluate damage tolerance. The results showed that damage initiation began with matrix failure whereas damage and/or fracture progression occurred as a result of additional matrix failure and fiber fracture. In both thin cylinder cases examined (defective and defect-free), the optimum layup configuration was (90/0/+/-60)(sub s) because it had the best damage tolerance with respect to the burst pressure.

Gotsis, Pascal K.↗
NASA NTRS1992

Structural durability of stiffened composite shells

The durability of a stiffened composite cylindrical shell panel is investigated under several loading conditions. An integrated computer code is utilized for the simulation of load induced structural degradation. Damage initiation, growth, and accumulation up to the stage of propagation to fracture and included in the computational simulation. Results indicate significant differences in the degradation paths for different loading cases. Effects of combined loading on structural durability and ultimate structural strength of a stiffened shell are assessed.

Minnetyan, Levon↗
DOE OSTI2026

Bioproduction, bioprotection, and biocontainment in multi-kingdom microbial systems with 3D spatial control

Engineered living materials (ELMs) are a class of hybrid materials that include engineered microbes encapsulated by a polymer matrix. The biotic and abiotic components define the ELMs design space and can be altered to improve performance and function. While current synthetic materials in the field display robust biocompatibility with both native and engineered living systems, we have a limited understanding of how to leverage three-dimensional (3D) form factors to spatially organize and control microbial dynamics within the material. Motivated by this knowledge gap, we employed extrusion-based 3D printing to fabricate multi-kingdom hydrogel constructs for the encapsulation of both single and multi-kingdom microbial systems. Core–shell cubic constructs enabled the spatial organization of a constitutive multi-kingdom system of levodopa (L-DOPA)-producing E. coli and betaxanthins (BXN)-producing S. cerevisiae. This spatial organization in 3D materials can introduce precise control over bioproduction, bioprotection, and biocontainment features that are critical to the efficacy of current ELMs. The relative spatial organization of the organisms, as well as the surface area-to-volume ratio were investigated to determine how these design elements impact microbial behavior (metabolite production, growth, expression, and cell distribution) over time. We demonstrated that F127-bis-urethane methacrylate (F127-BUM) core–shell geometries enable the hierarchical 3D printing of multi-kingdom constructs, offering customizable control over bioproduction, bioprotection, and biocontainment. With the optimization of these core–shell structures for continuous bioproduction, these ELMs could be deployed as compact and sustainable bioreactors in remote environments.

additive manufacturing↗
NASA NTRS1992

Structural durability of stiffened composite shells

The durability of a stiffened composite cylindrical shell panel is investigated under several loading conditions. An integrated computer code is utilized for the simulation of load induced structural degradation. Damage initiation, growth, and accumulation up to the stage of propagation to fracture are included in the computational simulation. Results indicate significant differences in the degradation paths for different loading cases. The effects of combined loading on structural durability and ultimate structural strength of a stiffened shell are assessed.

Minnetyan, Levon↗
DOE OSTI2024

Towards chloroplastic nanofactories: formation of proteinaceous scaffolds for metabolic engineering

The evolution of eukaryotic lipid-bound organelles allows for specialized metabolism to occur within spatially distinct metabolic landscapes within the same cell. However, this strategy of compartmentalization is not unique to eukaryotic organisms. Many bacteria, spread across 45 different phyla, contain loci that encode for specialized bacterial microcompartments (BMCs) (Sutter et al., 2021). The formation of a BMC involves self-assembly from three families of shell proteins to form the outer shell membrane, in addition to the encapsulation of an enzymatic core packaged within the lumen of a BMC (Kerfeld et al., 2018). These proteinaceous organelles provide a competitive growth advantage by enabling organisms to process inaccessible substrates by sequestering metabolic intermediates (i.e. aldehydes) that would otherwise be toxic within the cytoplasm. While BMCs perform specific metabolic functions in their native organism, synthetic, empty BMC shells can form without the requirement of native cargo inside (Doron and Kerfeld, 2024). This provides a transferable and tunable platform of protein scaffolding for guiding metabolic engineering within a host organism of choice (Raba and Kerfeld, 2022).

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRSDate not supplied

BioNutrients-2: Improvements to the BioNutrients-1 Nutrient Production System

The BioNutrients (BN) project aims to develop an on-demand biological production system capable of rapid and safe delivery of multiple nutrients in single-use production packs for long-duration missions. The general concept of this system is to develop edible engineered microorganisms that produce nutrients for human consumption following long-term storage, revival, and growth. BN-1 is a five-year flight project currently on the International Space Station (ISS). It is testing the long-term storage of various microorganisms for the biomanufacturing of space-relevant compounds and validating the performance of the first generation of production packs. The BN-2 project expands the BN-1 flight project scope by introducing novel products, broadening the range of microbial food sources, and improving upon production pack hardware. We are optimizing the biomanufacturing platform for in situ production of yogurt and kefir on the ISS. BN-2 also will test engineered microorganisms, including a probiotic strain, to produce carotenoids or follistatin. To improve the feasibility of this technology for mission use, we transitioned from a hard-shell pack to a second-generation fluorinated ethylene propylene (FEP) bag. The single-use FEP bioreactor facilitates growth of target organisms in a contaminant free environment, while reducing mass and volume compared to the BN-1 hardware. These bioreactors will be employed for production of additional space-relevant products in the BN-2 project. On-orbit testing of FEP production packs will enable optimization of the platform for eventual flight use by the crew.

Natalie Ball↗
DOE OSTI2026

Multiphasic droplet microfluidics platform for controlled bacteria and mammalian cell co-culture

Microfluidics has revolutionized high-throughput miniaturized biological assays. However, co-culture of mammalian cells and bacteria remains challenging in microfluidic systems due to incompatible growth requirements, limited spatial control, and the requirement for a mammalian cell adhesion matrix. Here, we present a microfluidic platform that generates multiphasic droplets which encapsulate mammalian and bacterial cells, enabling their direct and indirect co-culture. By combining photopolymerizable hydrogels with polymer phase separation, we generate core–shell droplets composed of a liquid and a hydrogel compartment. The hydrogel compartment supports mammalian cell adhesion and culture, while the liquid compartment sustains bacterial growth. We demonstrate two droplet architectures that allow physical bacteria–mammalian cell contacts or enforce complete physical separation, representing direct and indirect co-culture. Our multiphasic droplets are stable, customizable, able to sustain co-culture for over 24 hours, and compatible with fluorescence-based cell sorting technologies. Overall, our multiphasic droplet microfluidic platform provides a scalable and versatile tool for high-throughput co-culture and screening of host–microbe interactions.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRSDate not supplied

BioNutrients-2: Improvements to the BioNutrients-1 Nutrient Production System

The BioNutrients (BN) project aims to develop an on-demand nutrient production system capable of rapid and safe delivery of multiple nutrients in a single-use production pack for long-duration missions. The general concept of this system will be to develop an edible engineered microorganism capable of surviving during long-term storage, revival and growth of that microorganism for product production, and delivery of precise quantities of nutrients for human consumption. BN-1 is a five-year flight project currently on the International Space Station (ISS). It is testing the long-term storage of various microorganisms for the biomanufacturing of space relevant compounds and to validate the performance of the first generation (Gen-1) of production packs. The BN-2 project is a continuation of the BN-1 flight project and intends to expand the projects overall scope by introducing novel products, broadening the range of microbial food sources, and improving previously designed hardware from the BN-1 project. We are in the process of optimizing our platform biomanufacturing technology for in situ production of yogurt and kefir on the ISS. BN-2 will test the efficacy of this technology for future delivery of probiotic organisms which can be engineered to produce additional nutritional supplements (consumption by the crew is not planned in this project). Furthermore, to improve the feasibility of this technology for mission use we have transitioned from a hard-shell pack to a Gen-2, fluorinated ethylene propylene (FEP) bag. The single-use FEP bioreactor will facilitate growth of known organisms and ensure a contaminant free environment, while reducing mass and volume. These bioreactors will be employed for production of additional space relevant products in the BN-2 project. On-orbit testing of Gen-2 production packs will be necessary for future iterations, in order to optimize bag design and product production for eventual flight use by the crew.

BioNutrients↗