Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sb 2 Te 3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Cubic AgMnSbTe 3 Semiconductor with a High Thermoelectric Performance

The reaction of MnTe with AgSbTe 2 in an equimolar ratio (ATMS) provides a new semiconductor, AgMnSbTe 3 . AgMnSbTe 3 crystallizes in an average rock-salt NaCl structure with Ag, Mn, and Sb cations statistically occupying the Na sites. AgMnSbTe 3 is a p-type semiconductor with a narrow band gap of ~0.33 eV. A pair distribution function analysis indicates that local distortions are associated with the location of the Ag atoms in the lattice. Density functional theory calculations suggest a specific electronic band structure with multi-peak valence band maxima prone to energy convergence. In addition, Ag 2 Te nanograins precipitate at grain boundaries of AgMnSbTe 3 . Here, the energy offset of the valance band edge between AgMnSbTe 3 and Ag 2 Te is ~0.05 eV, which implies that Ag 2 Te precipitates exhibit a negligible effect on the hole transmission. As a result, ATMS exhibits a high power factor of ~12.2 μWcm -1 K -2 at 823 K, ultralow lattice thermal conductivity of ~0.34 Wm -1 K -1 (823 K), high peak ZT of ~1.46 at 823 K, and high average ZT of ~0.87 in the temperature range of 400–823 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Materials Data on Sb2Te2O9 by Materials Project

Sb2Te2O9 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. there are four inequivalent Sb5+ sites. In the first Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 44–45°. There are a spread of Sb–O bond distances ranging from 1.99–2.03 Å. In the second Sb5+ site, Sb5+ is bonded to five O2- atoms to form distorted SbO5 trigonal bipyramids that share a cornercorner with one TeO5 trigonal bipyramid. There are a spread of Sb–O bond distances ranging from 1.91–2.04 Å. In the third Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 44–45°. There are a spread of Sb–O bond distances ranging from 1.99–2.07 Å. In the fourth Sb5+ site, Sb5+ is bonded in a 5-coordinate geometry to five O2- atoms. There are a spread of Sb–O bond distances ranging from 2.07–2.63 Å. There are four inequivalent Te4+ sites. In the first Te4+ site, Te4+ is bonded to five O2- atoms to form TeO5 trigonal bipyramids that share a cornercorner with one SbO5 trigonal bipyramid. There are a spread of Te–O bond distances ranging from 1.84–2.03 Å. In the second Te4+ site, Te4+ is bonded in a 3-coordinate geometry to three O2- atoms. There are a spread of Te–O bond distances ranging from 1.90–1.93 Å. In the third Te4+ site, Te4+ is bonded in a 3-coordinate geometry to three O2- atoms. There are a spread of Te–O bond distances ranging from 1.91–1.95 Å. In the fourth Te4+ site, Te4+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Te–O bond distances ranging from 1.91–2.64 Å. There are eighteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to one Sb5+ and one Te4+ atom. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the third O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Sb5+ atoms. In the fourth O2- site, O2- is bonded in a single-bond geometry to one Te4+ atom. In the fifth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the sixth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the seventh O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the eighth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the ninth O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Sb5+ and one Te4+ atom. In the tenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the eleventh O2- site, O2- is bonded in a 2-coordinate geometry to two Sb5+ atoms. In the twelfth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the thirteenth O2- site, O2- is bonded in a 3-coordinate geometry to one Sb5+ and two Te4+ atoms. In the fourteenth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the fifteenth O2- site, O2- is bonded in a 2-coordinate geometry to one Sb5+ and one Te4+ atom. In the sixteenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Sb5+ atoms. In the seventeenth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the eighteenth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to two Sb5+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Sb2Te2O9 by Materials Project

Sb2Te2O9 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. there are four inequivalent Sb5+ sites. In the first Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 46–48°. There are a spread of Sb–O bond distances ranging from 1.97–2.07 Å. In the second Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 44–47°. There are a spread of Sb–O bond distances ranging from 1.96–2.06 Å. In the third Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 45–48°. There are a spread of Sb–O bond distances ranging from 1.98–2.05 Å. In the fourth Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 43–47°. There are a spread of Sb–O bond distances ranging from 1.97–2.05 Å. There are four inequivalent Te4+ sites. In the first Te4+ site, Te4+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Te–O bond distances ranging from 1.93–2.43 Å. In the second Te4+ site, Te4+ is bonded in a 3-coordinate geometry to three O2- atoms. There is one shorter (1.87 Å) and two longer (1.93 Å) Te–O bond length. In the third Te4+ site, Te4+ is bonded in a 3-coordinate geometry to three O2- atoms. There are a spread of Te–O bond distances ranging from 1.91–1.95 Å. In the fourth Te4+ site, Te4+ is bonded in a 3-coordinate geometry to three O2- atoms. There are a spread of Te–O bond distances ranging from 1.90–1.93 Å. There are eighteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to one Sb5+ and one Te4+ atom. In the second O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the third O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the fifth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to two Sb5+ atoms. In the sixth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the seventh O2- site, O2- is bonded in a 2-coordinate geometry to one Sb5+ and one Te4+ atom. In the eighth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Sb5+ atoms. In the ninth O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Sb5+ atoms. In the tenth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the eleventh O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the twelfth O2- site, O2- is bonded in a 2-coordinate geometry to one Sb5+ and one Te4+ atom. In the thirteenth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the fourteenth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the fifteenth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to two Sb5+ atoms. In the sixteenth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to two Sb5+ atoms. In the seventeenth O2- site, O2- is bonded in a 3-coordinate geometry to two equivalent Sb5+ and one Te4+ atom. In the eighteenth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Sb2Te2O9 by Materials Project

Sb2Te2O9 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. there are four inequivalent Sb5+ sites. In the first Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedral tilt angles are 45°. There are a spread of Sb–O bond distances ranging from 1.97–2.07 Å. In the second Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. There are a spread of Sb–O bond distances ranging from 1.98–2.04 Å. In the third Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 44–45°. There are a spread of Sb–O bond distances ranging from 1.98–2.06 Å. In the fourth Sb5+ site, Sb5+ is bonded to five O2- atoms to form SbO5 trigonal bipyramids that share a cornercorner with one SbO6 octahedra and corners with two equivalent SbO5 trigonal bipyramids. The corner-sharing octahedral tilt angles are 45°. There are a spread of Sb–O bond distances ranging from 1.93–2.00 Å. There are four inequivalent Te4+ sites. In the first Te4+ site, Te4+ is bonded in a distorted rectangular see-saw-like geometry to four O2- atoms. There are a spread of Te–O bond distances ranging from 1.91–2.28 Å. In the second Te4+ site, Te4+ is bonded in a 3-coordinate geometry to three O2- atoms. There are a spread of Te–O bond distances ranging from 1.89–1.96 Å. In the third Te4+ site, Te4+ is bonded in a 5-coordinate geometry to five O2- atoms. There are a spread of Te–O bond distances ranging from 1.91–2.66 Å. In the fourth Te4+ site, Te4+ is bonded in a 3-coordinate geometry to three O2- atoms. There are a spread of Te–O bond distances ranging from 1.88–1.95 Å. There are eighteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to one Sb5+ and one Te4+ atom. In the second O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the third O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Sb5+ and one Te4+ atom. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the fifth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the sixth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the seventh O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the eighth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the ninth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Sb5+ atoms. In the tenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the eleventh O2- site, O2- is bonded in a 2-coordinate geometry to two Sb5+ atoms. In the twelfth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the thirteenth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the fourteenth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the fifteenth O2- site, O2- is bonded in a 3-coordinate geometry to one Sb5+ and two equivalent Te4+ atoms. In the sixteenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Sb5+ atoms. In the seventeenth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the eighteenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Sb5+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Yb3(Sb7Te12)2 by Materials Project

Yb3(Sb7Te12)2 crystallizes in the triclinic P1 space group. The structure is three-dimensional. there are three inequivalent Yb3+ sites. In the first Yb3+ site, Yb3+ is bonded in a 7-coordinate geometry to seven Te2- atoms. There are a spread of Yb–Te bond distances ranging from 3.14–3.73 Å. In the second Yb3+ site, Yb3+ is bonded in a 5-coordinate geometry to five Te2- atoms. There are a spread of Yb–Te bond distances ranging from 3.09–3.38 Å. In the third Yb3+ site, Yb3+ is bonded in a 7-coordinate geometry to seven Te2- atoms. There are a spread of Yb–Te bond distances ranging from 3.18–3.64 Å. There are fourteen inequivalent Sb+2.79+ sites. In the first Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with four SbTe6 octahedra, edges with five SbTe6 octahedra, and an edgeedge with one SbTe5 trigonal bipyramid. The corner-sharing octahedra tilt angles range from 40–74°. There are a spread of Sb–Te bond distances ranging from 2.90–3.54 Å. In the second Sb+2.79+ site, Sb+2.79+ is bonded in a rectangular see-saw-like geometry to four Te2- atoms. There are a spread of Sb–Te bond distances ranging from 2.84–3.12 Å. In the third Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with three SbTe6 octahedra, corners with two equivalent SbTe6 pentagonal pyramids, a cornercorner with one SbTe5 square pyramid, edges with three SbTe6 octahedra, an edgeedge with one SbTe5 square pyramid, and a faceface with one SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 44–76°. There are a spread of Sb–Te bond distances ranging from 2.87–3.52 Å. In the fourth Sb+2.79+ site, Sb+2.79+ is bonded to five Te2- atoms to form a mixture of corner and edge-sharing SbTe5 trigonal bipyramids. The corner-sharing octahedra tilt angles range from 42–59°. There are a spread of Sb–Te bond distances ranging from 2.91–3.20 Å. In the fifth Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with four SbTe6 octahedra, edges with five SbTe6 octahedra, and an edgeedge with one SbTe5 trigonal bipyramid. The corner-sharing octahedra tilt angles range from 36–71°. There are a spread of Sb–Te bond distances ranging from 2.95–3.32 Å. In the sixth Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with six SbTe6 octahedra, corners with two equivalent SbTe5 trigonal bipyramids, an edgeedge with one SbTe6 octahedra, and an edgeedge with one SbTe5 trigonal bipyramid. The corner-sharing octahedra tilt angles range from 36–74°. There are a spread of Sb–Te bond distances ranging from 2.88–3.49 Å. In the seventh Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share a cornercorner with one SbTe6 octahedra, corners with two equivalent SbTe5 trigonal bipyramids, an edgeedge with one SbTe6 octahedra, and an edgeedge with one SbTe6 pentagonal pyramid. The corner-sharing octahedral tilt angles are 67°. There are a spread of Sb–Te bond distances ranging from 2.86–3.41 Å. In the eighth Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with seven SbTe6 octahedra, corners with three equivalent SbTe6 pentagonal pyramids, a cornercorner with one SbTe5 square pyramid, an edgeedge with one SbTe5 square pyramid, and a faceface with one SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 30–70°. There are a spread of Sb–Te bond distances ranging from 2.95–3.46 Å. In the ninth Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with three SbTe6 octahedra, edges with five SbTe6 octahedra, an edgeedge with one SbTe5 square pyramid, and a faceface with one SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 30–57°. There are a spread of Sb–Te bond distances ranging from 2.95–3.46 Å. In the tenth Sb+2.79+ site, Sb+2.79+ is bonded to five Te2- atoms to form a mixture of corner and edge-sharing SbTe5 square pyramids. The corner-sharing octahedra tilt angles range from 41–89°. There are a spread of Sb–Te bond distances ranging from 2.89–3.29 Å. In the eleventh Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with eleven SbTe6 octahedra, corners with two equivalent SbTe5 square pyramids, and faces with two SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 37–76°. There are a spread of Sb–Te bond distances ranging from 2.94–3.43 Å. In the twelfth Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with two equivalent SbTe6 octahedra, edges with five SbTe6 octahedra, an edgeedge with one SbTe5 trigonal bipyramid, and a faceface with one SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 41–53°. There are a spread of Sb–Te bond distances ranging from 2.96–3.36 Å. In the thirteenth Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form SbTe6 pentagonal pyramids that share corners with five SbTe6 octahedra, a cornercorner with one SbTe5 square pyramid, an edgeedge with one SbTe6 octahedra, and a faceface with one SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 34–60°. There are a spread of Sb–Te bond distances ranging from 3.06–3.23 Å. In the fourteenth Sb+2.79+ site, Sb+2.79+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with five SbTe6 octahedra, a cornercorner with one SbTe5 square pyramid, edges with three SbTe6 octahedra, an edgeedge with one SbTe5 square pyramid, and a faceface with one SbTe6 pentagonal pyramid. The corner-sharing octahedra tilt angles range from 34–70°. There are a spread of Sb–Te bond distances ranging from 2.95–3.48 Å. There are twenty-four inequivalent Te2- sites. In the first Te2- site, Te2- is bonded in a 3-coordinate geometry to three Sb+2.79+ atoms. In the second Te2- site, Te2- is bonded in a distorted trigonal pyramidal geometry to two Yb3+ and two Sb+2.79+ atoms. In the third Te2- site, Te2- is bonded in a 4-coordinate geometry to four Sb+2.79+ atoms. In the fourth Te2- site, Te2- is bonded in a 1-coordinate geometry to one Yb3+ and three Sb+2.79+ atoms. In the fifth Te2- site, Te2- is bonded in a 4-coordinate geometry to four Sb+2.79+ atoms. In the sixth Te2- site, Te2- is bonded in a 4-coordinate geometry to four Sb+2.79+ atoms. In the seventh Te2- site, Te2- is bonded in a 4-coordinate geometry to four Sb+2.79+ atoms. In the eighth Te2- site, Te2- is bonded in a 5-coordinate geometry to three Yb3+ and two Sb+2.79+ atoms. In the ninth Te2- site, Te2- is bonded in a 5-coordinate geometry to two Yb3+ and three Sb+2.79+ atoms. In the tenth Te2- site, Te2- is bonded in a 3-coordinate geometry to four Sb+2.79+ atoms. In the eleventh Te2- site, Te2- is bonded in a 5-coordinate geometry to one Yb3+ and four Sb+2.79+ atoms. In the twelfth Te2- site, Te2- is bonded in a 4-coordinate geometry to four Sb+2.79+ atoms. In the thirteenth Te2- site, Te2- is bonded in a distorted rectangular see-saw-like geometry to four Sb+2.79+ atoms. In the fourteenth Te2- site, Te2- is bonded in a distorted rectangular see-saw-like geometry to four Sb+2.79+ atoms. In the fifteenth Te2- site, Te2- is bonded in a 3-coordinate geometry to three Sb+2.79+ atoms. In the sixteenth Te2- site, Te2- is bonded in a distorted rectangular see-saw-like geometry to one Yb3+ and three Sb+2.79+ atoms. In the seventeenth Te2- site, Te2- is bonded in a 5-coordinate geometry to one Yb3+ and four Sb+2.79+ atoms. In the eighteenth Te2- site, Te2- is bonded in a 4-coordinate geometry to two Yb3+ and two Sb+2.79+ atoms. In the nineteenth Te2- site, Te2- is bonded in a 4-coordinate geometry to two Yb3+ and two Sb+2.79+ atoms. In the twentieth Te2- site, Te2- is bonded in a 1-coordinate geometry to one Yb3+ and three Sb+2.79+ atoms. In the twenty-first Te2- site, Te2- is bonded in a 5-coordinate geometry to five Sb+2.79+ atoms. In the twenty-second Te2- site, Te2- is bonded in a 3-coordinate geometry to three Sb+2.79+ atoms. In the twenty-third Te2- site, Te2- is bonded in a 4-coordinate geometry to two Yb3+ and two Sb+2.79+ atoms. In the twenty-fourth Te2- site, Te2- is bonded in a 1-coordinate geometry to one Yb3+ and four Sb+2.79+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Bi(SbTe2)3 by Materials Project

Bi(SbTe2)3 is MAX Phase-like structured and crystallizes in the monoclinic Cm space group. The structure is two-dimensional and consists of two Bi(SbTe2)3 sheets oriented in the (1, 0, 0) direction. Bi3+ is bonded to six Te2- atoms to form BiTe6 octahedra that share corners with three equivalent SbTe6 octahedra, edges with two equivalent BiTe6 octahedra, and edges with seven SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. There are a spread of Bi–Te bond distances ranging from 3.11–3.26 Å. There are three inequivalent Sb3+ sites. In the first Sb3+ site, Sb3+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with three equivalent SbTe6 octahedra, edges with four equivalent BiTe6 octahedra, and edges with five SbTe6 octahedra. The corner-sharing octahedral tilt angles are 2°. There are a spread of Sb–Te bond distances ranging from 3.01–3.25 Å. In the second Sb3+ site, Sb3+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with three equivalent SbTe6 octahedra, edges with two equivalent BiTe6 octahedra, and edges with seven SbTe6 octahedra. The corner-sharing octahedral tilt angles are 2°. There are a spread of Sb–Te bond distances ranging from 3.04–3.22 Å. In the third Sb3+ site, Sb3+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with three equivalent BiTe6 octahedra, an edgeedge with one BiTe6 octahedra, and edges with eight SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. There are a spread of Sb–Te bond distances ranging from 3.03–3.21 Å. There are six inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to one Bi3+ and five Sb3+ atoms to form edge-sharing TeBiSb5 octahedra. In the second Te2- site, Te2- is bonded to two equivalent Bi3+ and four Sb3+ atoms to form edge-sharing TeBi2Sb4 octahedra. In the third Te2- site, Te2- is bonded in a 6-coordinate geometry to two equivalent Bi3+ and one Sb3+ atom. In the fourth Te2- site, Te2- is bonded in a 6-coordinate geometry to one Bi3+ and two equivalent Sb3+ atoms. In the fifth Te2- site, Te2- is bonded in a 6-coordinate geometry to three Sb3+ atoms. In the sixth Te2- site, Te2- is bonded in a 6-coordinate geometry to three Sb3+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Half-Heusler alloys as emerging high power density thermoelectric cooling materials

Abstract To achieve optimal thermoelectric performance, it is crucial to manipulate the scattering processes within materials to decouple the transport of phonons and electrons. In half-Heusler (hH) compounds, selective defect reduction can significantly improve performance due to the weak electron-acoustic phonon interaction. This study utilized Sb-pressure controlled annealing process to modulate the microstructure and point defects of Nb 0.55 Ta 0.40 Ti 0.05 FeSb compound, resulting in a 100% increase in carrier mobility and a maximum power factor of 78 µW cm −1 K −2 , approaching the theoretical prediction for NbFeSb single crystal. This approach yielded the highest average zT of ~0.86 among hH in the temperature range of 300-873 K. The use of this material led to a 210% enhancement in cooling power density compared to Bi 2 Te 3 -based devices and a conversion efficiency of 12%. These results demonstrate a promising strategy for optimizing hH materials for near-room-temperature thermoelectric applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Ag3SbTe6 by Materials Project

AgAg2SbTe4(Te)2 crystallizes in the orthorhombic Cmmm space group. The structure is two-dimensional and consists of two silver molecules; four tellurium molecules; and one Ag2SbTe4 sheet oriented in the (0, 0, 1) direction. In the Ag2SbTe4 sheet, Ag1+ is bonded in a linear geometry to two equivalent Te1- atoms. Both Ag–Te bond lengths are 2.66 Å. Sb3+ is bonded in a distorted rectangular see-saw-like geometry to four equivalent Te1- atoms. All Sb–Te bond lengths are 3.01 Å. Te1- is bonded in a 3-coordinate geometry to one Ag1+, one Sb3+, and one Te1- atom. The Te–Te bond length is 2.78 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Bi(SbTe2)3 by Materials Project

BiSbTe3Sb2Te3 is MAX Phase-like structured and crystallizes in the trigonal R3m space group. The structure is two-dimensional and consists of three BiSbTe3 sheets oriented in the (0, 0, 1) direction and three Sb2Te3 sheets oriented in the (0, 0, 1) direction. In each BiSbTe3 sheet, Bi3+ is bonded to six Te2- atoms to form BiTe6 octahedra that share corners with three equivalent SbTe6 octahedra, edges with three equivalent SbTe6 octahedra, and edges with six equivalent BiTe6 octahedra. The corner-sharing octahedral tilt angles are 2°. There are three shorter (3.08 Å) and three longer (3.26 Å) Bi–Te bond lengths. Sb3+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with three equivalent BiTe6 octahedra, edges with three equivalent BiTe6 octahedra, and edges with six equivalent SbTe6 octahedra. The corner-sharing octahedral tilt angles are 2°. There are three shorter (3.03 Å) and three longer (3.19 Å) Sb–Te bond lengths. There are three inequivalent Te2- sites. In the first Te2- site, Te2- is bonded in a 6-coordinate geometry to three equivalent Sb3+ atoms. In the second Te2- site, Te2- is bonded in a 6-coordinate geometry to three equivalent Bi3+ atoms. In the third Te2- site, Te2- is bonded to three equivalent Bi3+ and three equivalent Sb3+ atoms to form edge-sharing TeBi3Sb3 octahedra. In each Sb2Te3 sheet, there are two inequivalent Sb3+ sites. In the first Sb3+ site, Sb3+ is bonded to six Te2- atoms to form a mixture of edge and corner-sharing SbTe6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are three shorter (3.04 Å) and three longer (3.21 Å) Sb–Te bond lengths. In the second Sb3+ site, Sb3+ is bonded to six Te2- atoms to form a mixture of edge and corner-sharing SbTe6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are three shorter (3.04 Å) and three longer (3.21 Å) Sb–Te bond lengths. There are two inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to six Sb3+ atoms to form edge-sharing TeSb6 octahedra. In the second Te2- site, Te2- is bonded in a 6-coordinate geometry to three equivalent Sb3+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on SbTe(IF2)3 by Materials Project

SbTe(IF2)3 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. Sb5+ is bonded to six F1- atoms to form SbF6 octahedra that share corners with two equivalent TeI3F2 square pyramids. There are a spread of Sb–F bond distances ranging from 1.91–1.94 Å. Te4+ is bonded to three I1- and two F1- atoms to form TeI3F2 square pyramids that share corners with two equivalent SbF6 octahedra. The corner-sharing octahedra tilt angles range from 32–49°. There are two shorter (2.70 Å) and one longer (2.71 Å) Te–I bond lengths. There are one shorter (2.88 Å) and one longer (2.95 Å) Te–F bond lengths. There are three inequivalent I1- sites. In the first I1- site, I1- is bonded in a 2-coordinate geometry to one Te4+ and one F1- atom. The I–F bond length is 3.06 Å. In the second I1- site, I1- is bonded in a 2-coordinate geometry to one Te4+ and one F1- atom. The I–F bond length is 3.05 Å. In the third I1- site, I1- is bonded in a 1-coordinate geometry to one Te4+ and six F1- atoms. There are a spread of I–F bond distances ranging from 3.51–3.75 Å. There are six inequivalent F1- sites. In the first F1- site, F1- is bonded in a distorted single-bond geometry to one Sb5+, one Te4+, and one I1- atom. In the second F1- site, F1- is bonded in a distorted single-bond geometry to one Sb5+ and one Te4+ atom. In the third F1- site, F1- is bonded in a distorted single-bond geometry to one Sb5+ and two I1- atoms. In the fourth F1- site, F1- is bonded in a single-bond geometry to one Sb5+ and two equivalent I1- atoms. In the fifth F1- site, F1- is bonded in a distorted single-bond geometry to one Sb5+ and two I1- atoms. In the sixth F1- site, F1- is bonded in a single-bond geometry to one Sb5+ and one I1- atom.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Sodium–Antimony–Telluride Intermetallic Allows Sodium-Metal Cycling at 100% Depth of Discharge and as an Anode-Free Metal Battery

In this work, repeated cold rolling and folding is employed to fabricate a metallurgical composite of sodium–antimony–telluride Na 2 (Sb 2/6 Te 3/6 Vac 1/6 ) dispersed in electrochemically active sodium metal, termed “NST-Na.” This new intermetallic has a vacancy-rich thermodynamically stable face-centered-cubic structure and enables state-of-the-art electrochemical performance in widely employed carbonate and ether electrolytes. NST-Na achieves 100% depth-of-discharge (DOD) in 1 m NaPF 6 in G2, with 15 mAh cm –2 at 1 mA cm –2 and Coulombic efficiency (CE) of 99.4%, for 1000 h of plating/stripping. Sodium-metal batteries (SMBs) with NST-Na and Na 3 V 2 (PO 4 ) 3 (NVP) or sulfur cathodes give significantly improved energy, cycling, and CE (>99%). An anode-free battery with NST collector and NVP obtains 0.23% capacity decay per cycle. Imaging and tomography using conventional and cryogenic microscopy (Cryo-EM) indicate that the sodium metal fills the open space inside the self-supporting sodiophilic NST skeleton, resulting in dense (pore-free and solid electrolyte interphase (SEI)-free) metal deposits with flat surfaces. The baseline Na deposit consists of filament-like dendrites and “dead metal”, intermixed with pores and SEI. Density functional theory calculations show that the uniqueness of NST lies in the thermodynamic stability of the Na atoms (rather than clusters) on its surface that leads to planar wetting, and in its own stability that prevents decomposition during cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Ge3(SbTe3)2 by Materials Project

Ge3Sb2Te6 crystallizes in the monoclinic C2/m space group. The structure is three-dimensional. there are two inequivalent Ge4+ sites. In the first Ge4+ site, Ge4+ is bonded to six Te2- atoms to form GeTe6 octahedra that share corners with four equivalent GeTe6 octahedra, edges with five GeTe6 octahedra, and edges with five equivalent SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–5°. There are a spread of Ge–Te bond distances ranging from 2.92–3.09 Å. In the second Ge4+ site, Ge4+ is bonded to six Te2- atoms to form GeTe6 octahedra that share corners with two equivalent GeTe6 octahedra, corners with four equivalent SbTe6 octahedra, edges with four equivalent SbTe6 octahedra, and edges with six equivalent GeTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–3°. There are a spread of Ge–Te bond distances ranging from 2.97–3.05 Å. Sb is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with two equivalent GeTe6 octahedra, corners with four equivalent SbTe6 octahedra, edges with two equivalent SbTe6 octahedra, and edges with seven GeTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–4°. There are a spread of Sb–Te bond distances ranging from 3.01–3.09 Å. There are four inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to four Ge4+ and one Sb atom to form TeGe4Sb square pyramids that share corners with five TeGe4Sb square pyramids, edges with three equivalent TeGe4Sb2 octahedra, and edges with five TeGe4Sb square pyramids. In the second Te2- site, Te2- is bonded to four Ge4+ and two equivalent Sb atoms to form TeGe4Sb2 octahedra that share corners with two equivalent TeGe4Sb2 octahedra, corners with four equivalent TeGe2Sb3 square pyramids, and edges with ten TeGe4Sb square pyramids. The corner-sharing octahedral tilt angles are 0°. In the third Te2- site, Te2- is bonded to two Ge4+ and three equivalent Sb atoms to form TeGe2Sb3 square pyramids that share corners with two equivalent TeGe4Sb2 octahedra, corners with five TeGe4Sb square pyramids, edges with two equivalent TeGe4Sb2 octahedra, and edges with five TeGe4Sb square pyramids. The corner-sharing octahedra tilt angles range from 0–1°. In the fourth Te2- site, Te2- is bonded in a square co-planar geometry to two equivalent Ge4+ and two equivalent Sb atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Sb2Te2O9 by Materials Project

Sb2Te2O9 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. there are four inequivalent Sb5+ sites. In the first Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 41–45°. There are a spread of Sb–O bond distances ranging from 1.98–2.04 Å. In the second Sb5+ site, Sb5+ is bonded to five O2- atoms to form corner-sharing SbO5 trigonal bipyramids. There are a spread of Sb–O bond distances ranging from 1.92–2.02 Å. In the third Sb5+ site, Sb5+ is bonded to six O2- atoms to form corner-sharing SbO6 octahedra. The corner-sharing octahedra tilt angles range from 41–45°. There are a spread of Sb–O bond distances ranging from 1.98–2.05 Å. In the fourth Sb5+ site, Sb5+ is bonded to five O2- atoms to form corner-sharing SbO5 trigonal bipyramids. There are a spread of Sb–O bond distances ranging from 1.94–2.06 Å. There are four inequivalent Te4+ sites. In the first Te4+ site, Te4+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Te–O bond distances ranging from 1.83–2.18 Å. In the second Te4+ site, Te4+ is bonded in a 5-coordinate geometry to five O2- atoms. There are a spread of Te–O bond distances ranging from 1.93–2.51 Å. In the third Te4+ site, Te4+ is bonded in a 5-coordinate geometry to five O2- atoms. There are a spread of Te–O bond distances ranging from 1.90–2.74 Å. In the fourth Te4+ site, Te4+ is bonded in a 7-coordinate geometry to seven O2- atoms. There are a spread of Te–O bond distances ranging from 1.90–2.89 Å. There are eighteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to one Sb5+ and two Te4+ atoms. In the second O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the third O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Sb5+ and one Te4+ atom. In the fourth O2- site, O2- is bonded in a distorted single-bond geometry to two Te4+ atoms. In the fifth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the sixth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the seventh O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Sb5+ and two Te4+ atoms. In the eighth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the ninth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Sb5+ atoms. In the tenth O2- site, O2- is bonded in a bent 150 degrees geometry to one Sb5+ and one Te4+ atom. In the eleventh O2- site, O2- is bonded in a 2-coordinate geometry to two Sb5+ and one Te4+ atom. In the twelfth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the thirteenth O2- site, O2- is bonded in a 2-coordinate geometry to one Sb5+ and two Te4+ atoms. In the fourteenth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Sb5+ and two Te4+ atoms. In the fifteenth O2- site, O2- is bonded in a 3-coordinate geometry to one Sb5+ and two equivalent Te4+ atoms. In the sixteenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Sb5+ atoms. In the seventeenth O2- site, O2- is bonded in a bent 120 degrees geometry to one Sb5+ and one Te4+ atom. In the eighteenth O2- site, O2- is bonded in a bent 120 degrees geometry to two Sb5+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Sb2Te3 by Materials Project

Sb2Te3 is Molybdenum Carbide MAX Phase-like structured and crystallizes in the monoclinic C2/m space group. The structure is three-dimensional. there are two inequivalent Sb3+ sites. In the first Sb3+ site, Sb3+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with six SbTe6 octahedra, edges with four equivalent TeTe6 octahedra, and edges with eight SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–7°. There are a spread of Sb–Te bond distances ranging from 3.08–3.22 Å. In the second Sb3+ site, Sb3+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with two equivalent TeTe6 octahedra, corners with four SbTe6 octahedra, an edgeedge with one TeTe6 octahedra, and edges with eleven SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 3–5°. There are a spread of Sb–Te bond distances ranging from 3.07–3.28 Å. There are four inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to four Sb3+ and two equivalent Te2- atoms to form a mixture of edge and corner-sharing TeSb4Te2 octahedra. The corner-sharing octahedra tilt angles range from 0–7°. Both Te–Te bond lengths are 3.36 Å. In the second Te2- site, Te2- is bonded to six Sb3+ atoms to form a mixture of edge and corner-sharing TeSb6 octahedra. The corner-sharing octahedra tilt angles range from 2–4°. In the third Te2- site, Te2- is bonded to four equivalent Sb3+ and two equivalent Te2- atoms to form TeSb4Te2 octahedra that share corners with six TeSb6 octahedra and edges with twelve TeSb4Te2 octahedra. The corner-sharing octahedra tilt angles range from 0–2°. Both Te–Te bond lengths are 3.12 Å. In the fourth Te2- site, Te2- is bonded to six Te2- atoms to form TeTe6 octahedra that share corners with two equivalent TeTe6 octahedra, corners with four equivalent SbTe6 octahedra, edges with two equivalent TeTe6 octahedra, and edges with ten SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–5°.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Ge9(Sb5Te12)2 by Materials Project

Ge9(Sb5Te12)2 crystallizes in the triclinic P1 space group. The structure is three-dimensional. there are nine inequivalent Ge4+ sites. In the first Ge4+ site, Ge4+ is bonded to six Te2- atoms to form distorted GeTe6 octahedra that share corners with five GeTe6 octahedra, edges with two equivalent GeTe6 octahedra, and edges with six SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 10–14°. There are a spread of Ge–Te bond distances ranging from 2.80–3.42 Å. In the second Ge4+ site, Ge4+ is bonded in a 6-coordinate geometry to six Te2- atoms. There are a spread of Ge–Te bond distances ranging from 2.74–3.46 Å. In the third Ge4+ site, Ge4+ is bonded to six Te2- atoms to form GeTe6 octahedra that share corners with four equivalent GeTe6 octahedra, edges with six SbTe6 octahedra, and edges with four equivalent GeTe5 square pyramids. The corner-sharing octahedra tilt angles range from 6–7°. There are a spread of Ge–Te bond distances ranging from 2.88–3.33 Å. In the fourth Ge4+ site, Ge4+ is bonded to six Te2- atoms to form GeTe6 octahedra that share corners with five GeTe6 octahedra, edges with four equivalent GeTe6 octahedra, and edges with eight SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 9–10°. There are a spread of Ge–Te bond distances ranging from 2.85–3.31 Å. In the fifth Ge4+ site, Ge4+ is bonded to six Te2- atoms to form distorted GeTe6 octahedra that share a cornercorner with one SbTe6 octahedra, corners with four equivalent GeTe6 octahedra, edges with two equivalent GeTe6 octahedra, and edges with four equivalent SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 2–12°. There are a spread of Ge–Te bond distances ranging from 2.68–3.38 Å. In the sixth Ge4+ site, Ge4+ is bonded to six Te2- atoms to form distorted GeTe6 octahedra that share corners with five GeTe6 octahedra and edges with eight SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 5–12°. There are a spread of Ge–Te bond distances ranging from 2.78–3.42 Å. In the seventh Ge4+ site, Ge4+ is bonded to five Te2- atoms to form distorted GeTe5 square pyramids that share corners with four SbTe6 octahedra, corners with four equivalent GeTe5 square pyramids, edges with two equivalent SbTe6 octahedra, and edges with four equivalent GeTe6 octahedra. The corner-sharing octahedra tilt angles range from 82–84°. There are a spread of Ge–Te bond distances ranging from 2.65–3.24 Å. In the eighth Ge4+ site, Ge4+ is bonded to six Te2- atoms to form distorted GeTe6 octahedra that share corners with six GeTe6 octahedra and edges with eight SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 4–12°. There are a spread of Ge–Te bond distances ranging from 2.77–3.43 Å. In the ninth Ge4+ site, Ge4+ is bonded to six Te2- atoms to form GeTe6 octahedra that share corners with five GeTe6 octahedra, edges with four equivalent GeTe6 octahedra, and edges with eight SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 7–9°. There are a spread of Ge–Te bond distances ranging from 2.85–3.36 Å. There are ten inequivalent Sb+1.20+ sites. In the first Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with five SbTe6 octahedra, corners with two equivalent GeTe5 square pyramids, edges with four GeTe6 octahedra, and edges with four equivalent SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 6–11°. There are a spread of Sb–Te bond distances ranging from 2.87–3.29 Å. In the second Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with six SbTe6 octahedra, edges with four GeTe6 octahedra, and edges with four equivalent SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 6–19°. There are a spread of Sb–Te bond distances ranging from 2.81–3.40 Å. In the third Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with six SbTe6 octahedra, edges with four equivalent SbTe6 octahedra, and edges with six GeTe6 octahedra. The corner-sharing octahedra tilt angles range from 4–16°. There are a spread of Sb–Te bond distances ranging from 2.82–3.37 Å. In the fourth Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share a cornercorner with one GeTe6 octahedra, corners with five SbTe6 octahedra, edges with four equivalent SbTe6 octahedra, and edges with six GeTe6 octahedra. The corner-sharing octahedra tilt angles range from 2–15°. There are a spread of Sb–Te bond distances ranging from 2.79–3.45 Å. In the fifth Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with six SbTe6 octahedra and edges with six GeTe6 octahedra. The corner-sharing octahedra tilt angles range from 7–12°. There are a spread of Sb–Te bond distances ranging from 2.86–3.34 Å. In the sixth Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with six SbTe6 octahedra, corners with two equivalent GeTe5 square pyramids, edges with four GeTe6 octahedra, and edges with four equivalent SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 6–10°. There are a spread of Sb–Te bond distances ranging from 2.93–3.19 Å. In the seventh Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with six SbTe6 octahedra, edges with two equivalent GeTe6 octahedra, and edges with two equivalent GeTe5 square pyramids. The corner-sharing octahedra tilt angles range from 10–19°. There are a spread of Sb–Te bond distances ranging from 2.82–3.44 Å. In the eighth Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with six SbTe6 octahedra, edges with four GeTe6 octahedra, and edges with four equivalent SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 8–19°. There are a spread of Sb–Te bond distances ranging from 2.83–3.38 Å. In the ninth Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form distorted SbTe6 octahedra that share corners with six SbTe6 octahedra, edges with four equivalent SbTe6 octahedra, and edges with six GeTe6 octahedra. The corner-sharing octahedra tilt angles range from 4–18°. There are a spread of Sb–Te bond distances ranging from 2.78–3.52 Å. In the tenth Sb+1.20+ site, Sb+1.20+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with six SbTe6 octahedra, edges with four equivalent SbTe6 octahedra, and edges with six GeTe6 octahedra. The corner-sharing octahedra tilt angles range from 2–7°. There are a spread of Sb–Te bond distances ranging from 3.03–3.15 Å. There are twenty-four inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to one Ge4+ and four Sb+1.20+ atoms to form TeGeSb4 square pyramids that share a cornercorner with one TeGe2Sb4 octahedra, corners with four equivalent TeGeSb4 square pyramids, and edges with eight TeGe4Sb2 octahedra. The corner-sharing octahedral tilt angles are 7°. In the second Te2- site, Te2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent Ge4+ and two equivalent Sb+1.20+ atoms. In the third Te2- site, Te2- is bonded in a distorted T-shaped geometry to one Ge4+ and two equivalent Sb+1.20+ atoms. In the fourth Te2- site, Te2- is bonded to two Ge4+ and four Sb+1.20+ atoms to form TeGe2Sb4 octahedra that share corners with five TeGe2Sb4 octahedra and a cornercorner with one TeGeSb4 square pyramid. The corner-sharing octahedra tilt angles range from 11–15°. In the fifth Te2- site, Te2- is bonded to two Ge4+ and four Sb+1.20+ atoms to form TeGe2Sb4 octahedra that share corners with five TeGe4Sb2 octahedra, a cornercorner with one TeGeSb4 square pyramid, edges with four TeGe4Sb2 octahedra, and edges with four equivalent TeGeSb4 square pyramids. The corner-sharing octahedra tilt angles range from 2–12°. In the sixth Te2- site, Te2- is bonded to four Ge4+ and two equivalent Sb+1.20+ atoms to form corner-sharing TeGe4Sb2 octahedra. The corner-sharing octahedra tilt angles range from 11–12°. In the seventh Te2- site, Te2- is bonded to one Ge4+ and four Sb+1.20+ atoms to form TeGeSb4 square pyramids that share corners with four equivalent TeGeSb4 square pyramids, edges with two equivalent TeGe4Sb2 octahedra, and edges with six TeGeSb4 square pyramids. In the eighth Te2- site, Te2- is bonded in a distorted rectangular see-saw-like geometry to two Ge4+ and two equivalent Sb+1.20+ atoms. In the ninth Te2- site, Te2- is bonded in a distorted square co-planar geometry to four Sb+1.20+ atoms. In the tenth Te2- site, Te2- is bonded to one Ge4+ and four Sb+1.20+ atoms to form distorted TeGeSb4 square pyramids that share a cornercorner with one TeGe2Sb4 octahedra, corners with four equivalent TeGeSb4 square pyramids, and edges with eight TeGe4Sb2 octahedra. The corner-sharing octahedral tilt angles are 9°. In the eleventh Te2- site, Te2- is bonded in a distorted L-shaped geometry to three Ge4+ atoms. In the twelfth Te2- site, Te2- is bonded in a distorted rectangular see-saw-like geometry to three Ge4+ and one Sb+1.20+ atom. In the thirteenth Te2- site, Te2- is bonded to four Ge4+ and one Sb+1.20+ atom to form TeGe4Sb square pyramids that share corners with six TeGeSb4 square pyramids, edges with four equivalent TeGe4Sb2 octahedra, and edges with two equivalent TeGeSb4 square pyramids. In the fourteenth Te2- site, Te2- is bonded in a 4-coordinate geometry to two equivalent Ge4+ and two Sb+1.20+ atoms. In the fifteenth Te2- site, Te2- is bonded in a 2-coordinate geometry to two equivalent Ge4+ and two Sb+1.20+ atoms. In the sixteenth Te2- site, Te2- is bonded to four Ge4+ and two Sb+1.20+ atoms to form distorted TeGe4Sb2 octahedra that share corners with four equivalent TeGe4Sb2 octahedra, edges with eight TeGe4Sb2 octahedra, and edges with four TeGeSb4 square pyramids. The corner-sharing octahedra tilt angles range from 7–9°. In the seventeenth Te2- site, Te2- is bonded in a 4-coordinate geometry to two equivalent Ge4+ and two Sb+1.20+ atoms. In the eighteenth Te2- site, Te2- is bonded in a 3-coordinate geometry to two equivalent Ge4+ and two Sb+1.20+ atoms. In the nineteenth Te2- site, Te2- is bonded to four Ge4+ and two Sb+1.20+ atoms to form distorted TeGe4Sb2 octahedra that share corners with four equivalent TeGe4Sb2 octahedra, corners with two equivalent TeGeSb4 square pyramids, and edges with six TeGeSb4 square pyramids. The corner-sharing octahedra tilt angles range from 6–16°. In the twentieth Te2- site, Te2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent Ge4+ and two Sb+1.20+ atoms. In the twenty-first Te2- site, Te2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent Ge4+ and two Sb+1.20+ atoms. In the twenty-second Te2- site, Te2- is bonded to four Ge4+ and two Sb+1.20+ atoms to form distorted TeGe4Sb2 octahedra that share corners with four equivalent TeGe4Sb2 octahedra, edges with eight TeGe4Sb2 octahedra, and edges with four TeGeSb4 square pyramids. The corner-sharing octahedra tilt angles range from 8–9°. In the twenty-third Te2- site, Te2- is bonded to one Ge4+ and four Sb+1.20+ atoms to form distorted TeGeSb4 square pyramids that share corners with three TeGe4Sb2 octahedra, corners with six TeGeSb4 square pyramids, and edges with four equivalent TeGeSb4 square pyramids. The corner-sharing octahedra tilt angles range from 10–87°. In the twenty-fourth Te2- site, Te2- is bonded to two Ge4+ and four Sb+1.20+ atoms to form TeGe2Sb4 octahedra that share corners with five TeGe2Sb4 octahedra, a cornercorner with one TeGeSb4 square pyramid, edges with four TeGe4Sb2 octahedra, and edges with four equivalent TeGeSb4 square pyramids. The corner-sharing octahedra tilt angles range from 10–13°.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on AgSb(Te8Pb7)2 by Materials Project

AgSb(Pb7Te8)2 is alpha Po-derived structured and crystallizes in the tetragonal I4/mmm space group. The structure is three-dimensional. Ag1+ is bonded to six Te2- atoms to form AgTe6 octahedra that share corners with two equivalent PbTe6 octahedra, corners with four equivalent SbTe6 octahedra, and edges with twelve PbTe6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are two shorter (2.98 Å) and four longer (3.36 Å) Ag–Te bond lengths. There are four inequivalent Pb2+ sites. In the first Pb2+ site, Pb2+ is bonded to six Te2- atoms to form a mixture of edge and corner-sharing PbTe6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are two shorter (3.22 Å) and four longer (3.27 Å) Pb–Te bond lengths. In the second Pb2+ site, Pb2+ is bonded to six Te2- atoms to form PbTe6 octahedra that share corners with six PbTe6 octahedra, edges with two equivalent AgTe6 octahedra, edges with two equivalent SbTe6 octahedra, and edges with eight equivalent PbTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–3°. There are two shorter (3.23 Å) and four longer (3.27 Å) Pb–Te bond lengths. In the third Pb2+ site, Pb2+ is bonded to six Te2- atoms to form PbTe6 octahedra that share corners with six equivalent PbTe6 octahedra, an edgeedge with one AgTe6 octahedra, an edgeedge with one SbTe6 octahedra, and edges with ten PbTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–8°. There are a spread of Pb–Te bond distances ranging from 3.20–3.28 Å. In the fourth Pb2+ site, Pb2+ is bonded to six Te2- atoms to form PbTe6 octahedra that share a cornercorner with one AgTe6 octahedra, a cornercorner with one SbTe6 octahedra, corners with four equivalent PbTe6 octahedra, and edges with twelve PbTe6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are four shorter (3.27 Å) and two longer (3.40 Å) Pb–Te bond lengths. Sb3+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with two equivalent PbTe6 octahedra, corners with four equivalent AgTe6 octahedra, and edges with twelve PbTe6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are two shorter (3.11 Å) and four longer (3.17 Å) Sb–Te bond lengths. There are six inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to six Pb2+ atoms to form a mixture of edge and corner-sharing TePb6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. In the second Te2- site, Te2- is bonded to six Pb2+ atoms to form a mixture of edge and corner-sharing TePb6 octahedra. The corner-sharing octahedra tilt angles range from 0–2°. In the third Te2- site, Te2- is bonded to one Ag1+, four Pb2+, and one Sb3+ atom to form TeAgSbPb4 octahedra that share corners with six TePb6 octahedra and edges with twelve TeAgSbPb4 octahedra. The corner-sharing octahedra tilt angles range from 0–2°. In the fourth Te2- site, Te2- is bonded to one Ag1+ and five Pb2+ atoms to form TeAgPb5 octahedra that share corners with six TeAgPb5 octahedra and edges with twelve TePb6 octahedra. The corner-sharing octahedra tilt angles range from 0–5°. In the fifth Te2- site, Te2- is bonded to five Pb2+ and one Sb3+ atom to form TeSbPb5 octahedra that share corners with six TeAgPb5 octahedra and edges with twelve TePb6 octahedra. The corner-sharing octahedra tilt angles range from 0–5°. In the sixth Te2- site, Te2- is bonded to one Ag1+, four Pb2+, and one Sb3+ atom to form TeAgSbPb4 octahedra that share corners with six TePb6 octahedra and edges with twelve TeAgSbPb4 octahedra. The corner-sharing octahedra tilt angles range from 0–2°. Both Te–Pb bond lengths are 3.20 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on GeSb4Te7 by Materials Project

Ge1Sb4Te7 is MAX Phase-like structured and crystallizes in the trigonal P-3m1 space group. The structure is two-dimensional and consists of one Ge(SbTe2)2 sheet oriented in the (0, 0, 1) direction and one Sb2Te3 sheet oriented in the (0, 0, 1) direction. In the Ge(SbTe2)2 sheet, Ge4+ is bonded to six equivalent Te2- atoms to form GeTe6 octahedra that share corners with six equivalent SbTe6 octahedra, edges with six equivalent GeTe6 octahedra, and edges with six equivalent SbTe6 octahedra. The corner-sharing octahedral tilt angles are 5°. All Ge–Te bond lengths are 3.02 Å. Sb+2.50+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with three equivalent GeTe6 octahedra, edges with three equivalent GeTe6 octahedra, and edges with six equivalent SbTe6 octahedra. The corner-sharing octahedral tilt angles are 5°. There are three shorter (3.02 Å) and three longer (3.21 Å) Sb–Te bond lengths. There are two inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to three equivalent Ge4+ and three equivalent Sb+2.50+ atoms to form a mixture of corner and edge-sharing TeGe3Sb3 octahedra. The corner-sharing octahedral tilt angles are 0°. In the second Te2- site, Te2- is bonded in a 3-coordinate geometry to three equivalent Sb+2.50+ atoms. In the Sb2Te3 sheet, Sb+2.50+ is bonded to six Te2- atoms to form a mixture of corner and edge-sharing SbTe6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are three shorter (3.03 Å) and three longer (3.19 Å) Sb–Te bond lengths. There are two inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to six equivalent Sb+2.50+ atoms to form edge-sharing TeSb6 octahedra. In the second Te2- site, Te2- is bonded in a 3-coordinate geometry to three equivalent Sb+2.50+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on AgSbTe3Pb by Materials Project

AgPbSbTe3 is Molybdenum Carbide MAX Phase-derived structured and crystallizes in the orthorhombic Imm2 space group. The structure is three-dimensional. Ag1+ is bonded to six Te2- atoms to form AgTe6 octahedra that share corners with two equivalent AgTe6 octahedra, corners with two equivalent PbTe6 octahedra, corners with two equivalent SbTe6 octahedra, edges with two equivalent AgTe6 octahedra, edges with five equivalent PbTe6 octahedra, and edges with five equivalent SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 1–6°. There are a spread of Ag–Te bond distances ranging from 3.04–3.16 Å. Pb2+ is bonded to six Te2- atoms to form PbTe6 octahedra that share corners with two equivalent AgTe6 octahedra, corners with two equivalent PbTe6 octahedra, corners with two equivalent SbTe6 octahedra, edges with two equivalent PbTe6 octahedra, edges with five equivalent AgTe6 octahedra, and edges with five equivalent SbTe6 octahedra. The corner-sharing octahedra tilt angles range from 3–5°. There are a spread of Pb–Te bond distances ranging from 3.16–3.31 Å. Sb3+ is bonded to six Te2- atoms to form SbTe6 octahedra that share corners with two equivalent AgTe6 octahedra, corners with two equivalent PbTe6 octahedra, corners with two equivalent SbTe6 octahedra, edges with two equivalent SbTe6 octahedra, edges with five equivalent AgTe6 octahedra, and edges with five equivalent PbTe6 octahedra. The corner-sharing octahedra tilt angles range from 1–7°. There are a spread of Sb–Te bond distances ranging from 3.06–3.16 Å. There are three inequivalent Te2- sites. In the first Te2- site, Te2- is bonded to two equivalent Ag1+, two equivalent Pb2+, and two equivalent Sb3+ atoms to form a mixture of edge and corner-sharing TeAg2Sb2Pb2 octahedra. The corner-sharing octahedra tilt angles range from 1–7°. In the second Te2- site, Te2- is bonded to two equivalent Ag1+, two equivalent Pb2+, and two equivalent Sb3+ atoms to form a mixture of edge and corner-sharing TeAg2Sb2Pb2 octahedra. The corner-sharing octahedra tilt angles range from 2–6°. In the third Te2- site, Te2- is bonded to two equivalent Ag1+, two equivalent Pb2+, and two equivalent Sb3+ atoms to form a mixture of edge and corner-sharing TeAg2Sb2Pb2 octahedra. The corner-sharing octahedra tilt angles range from 1–5°.

36 MATERIALS SCIENCE↗