Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STELLAR ATMOSPHERES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

On the Chemical Abundance of HR 8799 and the Planet c

Comparing chemical abundances of a planet and the host star reveals the origin and formation pathway of the planet. Stellar abundance is measured with high-resolution spectroscopy. Planet abundance, on the other hand, is usually inferred from low-resolution data. For directly imaged exoplanets, the data are available from a slew of high-contrast imaging/spectroscopy instruments. Here, we study the chemical abundance of HR 8799 and its planet c. We measure stellar abundance using LBT/PEPSI (R = 120,000) and archival HARPS data: stellar [C/H], [O/H], and C/O are 0.11 ± 0.12, 0.12 ± 0.14, and 0.54{sub −0.09}{sup +0.12}, all consistent with solar values. We conduct atmospheric retrieval using newly obtained Subaru/CHARIS data together with archival Gemini/GPI and Keck/OSIRIS data. We model the planet spectrum with petitRADTRANS and conduct retrieval using PyMultiNest. Retrieved planetary abundance can vary by ∼0.5 dex, from sub-stellar to stellar C and O abundances. The variation depends on whether strong priors are chosen to ensure a reasonable planet mass. Moreover, comparison with previous works also reveals inconsistency in abundance measurements. We discuss potential issues that can cause the inconsistency, e.g., systematics in individual data sets and different assumptions in the physics and chemistry in retrieval. We conclude that no robust retrieval can be obtained unless the issues are fully resolved.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Reduced Late Bombardment on Rocky Exoplanets around M Dwarfs

Ocean-vaporizing impacts of chemically reduced planetesimals onto the early Earth have been suggested to catalyze atmospheric production of reduced nitrogen compounds and trigger prebiotic synthesis despite an oxidized lithosphere. While geochemical evidence supports a dry, highly reduced late veneer on Earth, the composition of late-impacting debris around lower-mass stars is subject to variable volatile loss as a result of their hosts' extended pre-main-sequence phase. We perform simulations of late-stage planet formation across the M-dwarf mass spectrum to derive upper limits on reducing bombardment epochs in Hadean-analog environments. We contrast the solar system scenario with varying initial volatile distributions due to extended primordial runaway greenhouse phases on protoplanets and the desiccation of smaller planetesimals by internal radiogenic heating. We find a decreasing rate of late-accreting reducing impacts with decreasing stellar mass. Young planets around stars ≤0.4 M ⊙ experience no impacts of sufficient mass to generate prebiotically relevant concentrations of reduced atmospheric compounds once their stars have reached the main sequence. For M-dwarf planets to not exceed Earth-like concentrations of volatiles, both planetesimals, and larger protoplanets must undergo extensive devolatilization processes and can typically emerge from long-lived magma ocean phases with sufficient atmophile content to outgas secondary atmospheres. Our results suggest that transiently reducing surface conditions on young rocky exoplanets are favored around FGK stellar types relative to M dwarfs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

The Habitable Zone Planet Finder Reveals a High Mass and Low Obliquity for the Young Neptune K2-25b

Using radial velocity data from the Habitable Zone Planet Finder, we have measured the mass of the Neptune-sized planet K2-25b, as well as the obliquity of its M4.5 dwarf host star in the 600–800 Myr Hyades cluster. This is one of the youngest planetary systems for which both of these quantities have been measured and one of the very few M dwarfs with a measured obliquity. Based on a joint analysis of the radial velocity data, time-series photometry from the K2 mission, and new transit light curves obtained with diffuser-assisted photometry, the planet’s radius and mass are 3.44 ± 0.12 R {sub ⊕} and 24.5{sub −5.2}{sup +5.7}M{sub ⊕}. These properties are compatible with a rocky core enshrouded by a thin hydrogen–helium atmosphere (5% by mass). We measure an orbital eccentricity of e = 0.43 ± 0.05. The sky-projected stellar obliquity is λ = 3° ± 16°, compatible with spin–orbit alignment, in contrast to other “hot Neptunes” that have been studied around older stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

J-PLUS: Support vector regression to measure stellar parameters

Stellar parameters are among the most important characteristics in studies of stars which, in traditional methods, are based on atmosphere models. However, time, cost, and brightness limits restrain the efficiency of spectral observations. The Javalambre Photometric Local Universe Survey (J-PLUS) is an observational campaign that aims to obtain photometry in 12 bands. Owing to its characteristics, J-PLUS data have become a valuable resource for studies of stars. Machine learning provides powerful tools for efficiently analyzing large data sets, such as the one from J-PLUS, and enables us to expand the research domain to stellar parameters. The main goal of this study is to construct a support vector regression (SVR) algorithm to estimate stellar parameters of the stars in the first data release of the J-PLUS observational campaign. The training data for the parameter's regressions are featured with 12-waveband photometry from J-PLUS and are crossidentified with spectrum-based catalogs. These catalogs are from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope, the Apache Point Observatory Galactic Evolution Experiment, and the Sloan Extension for Galactic Understanding and Exploration. We then label them with the stellar effective temperature, the surface gravity, and the metallicity. Ten percent of the sample is held out to apply a blind test. We develop a new method, a multi-model approach, in order to fully take into account, the uncertainties of both the magnitudes and the stellar parameters. The method utilizes more than 200 models to apply the uncertainty analysis. We present a catalog of 2 493 424 stars with the root mean square error of 160 K in the effective temperature regression, 0.35 in the surface gravity regression, and 0.25 in the metallicity regression. We also discuss the advantages of this multi-model approach and compare it to other machine-learning methods.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The EBLM project – IX. Five fully convective M-dwarfs, precisely measured with CHEOPS and TESS light curves

ABSTRACT Eclipsing binaries are important benchmark objects to test and calibrate stellar structure and evolution models. This is especially true for binaries with a fully convective M-dwarf component for which direct measurements of these stars’ masses and radii are difficult using other techniques. Within the potential of M-dwarfs to be exoplanet host stars, the accuracy of theoretical predictions of their radius and effective temperature as a function of their mass is an active topic of discussion. Not only the parameters of transiting exoplanets but also the success of future atmospheric characterization relies on accurate theoretical predictions. We present the analysis of five eclipsing binaries with low-mass stellar companions out of a subsample of 23, for which we obtained ultra-high-precision light curves using the CHEOPS satellite. The observation of their primary and secondary eclipses are combined with spectroscopic measurements to precisely model the primary parameters and derive the M-dwarfs mass, radius, surface gravity, and effective temperature estimates using the PYCHEOPS data analysis software. Combining these results to the same set of parameters derived from TESS light curves, we find very good agreement (better than 1 per cent for radius and better than 0.2 per cent for surface gravity). We also analyse the importance of precise orbits from radial velocity measurements and find them to be crucial to derive M-dwarf radii in a regime below 5 per cent accuracy. These results add five valuable data points to the mass–radius diagram of fully convective M-dwarfs.

Sebastian, D. (ORCID:0000000222149258)↗
DOE OSTI2025

Exogeological inferences from white dwarf pollutants: the impact of stellar physics

Many white dwarfs have accreted material from their own planetary systems. These objects can be used to infer the composition of exoplanetary material and identify evidence for key geological processes. However, the white dwarf atmospheric physics distorts the inferred material composition away from the true composition, mainly through differential atomic diffusion of the accreted metals. Correcting for this effect is essential, but is dependent on various physical assumptions associated with the white dwarf itself. We first focus on the effect of assumptions related to convective overshoot and thermohaline mixing on the atomic diffusion time-scales. For white dwarfs with H-dominated atmospheres between 12000 K and 18000 K⁠, we find that including a complete treatment of convective overshoot decreases the inferred Fe and O abundances in accreted material. For these white dwarfs, we also find that including thermohaline mixing decreases Fe and O abundances. For He-dominated systems, the effect of convective overshoot is comparatively minor. We then explore the overall effect of other physical assumptions by comparing publicly available grids of diffusion time-scales. We find that the choice of model grid can have a large impact for white dwarfs with He-dominated atmospheres, notably on the inferred core to mantle ratio of accreted material. We identify several systems for which the geological interpretation is robust against these systematics. We also present a ‘discrepancy metric’ which can be used to estimate the potential impact of changing the stellar physics without requiring detailed modelling.

Astronomy and AstroPhysics↗
DOE OSTI2021

Trends in Spitzer Secondary Eclipses

It is well established that the magnitude of the incident stellar flux is the single most important factor in determining the day–night temperature gradients and atmospheric chemistries of short-period gas giant planets. However, it is likely that other factors, such as planet-to-planet variations in atmospheric metallicity, C/O ratio, and cloud properties, also contribute to the observed diversity of infrared spectra for this population of planets. In this study, we present new 3.6 and 4.5 μm secondary eclipse measurements for five transiting gas giant planets: HAT-P-5b, HAT-P-38b, WASP-7b, WASP-72b, and WASP-127b. We detect eclipses in at least one bandpass for all five planets and confirm circular orbits for all planets except WASP-7b, which shows evidence for a nonzero eccentricity. Building on the work of Garhart et al., we place these new planets into a broader context by comparing them with the sample of all planets with measured Spitzer secondary eclipses. We find that incident flux is the single most important factor for determining the atmospheric chemistry and circulation patterns of short-period gas giant planets. Although we might also expect surface gravity and host star metallicity to play a secondary role, we find no evidence for correlations with either of these two variables.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hypervelocity impact in stellar media: heat shielding, shock fronts and ablation clouds

The Frontier Plasma Science experiments proposed by our team will model the processes occurring during spacecraft atmospheric entries and meteorite planetary collisions by inserting material targets into the Scrape off Layer (SOL) and edge plasma of a tokamak. This project will investigate important plasma-material processes during high-enthalpy atmospheric entries, including heat flux generation and material ablation. Of particular interest is to explore heat and particle flux detachment in front of the sample using concepts and techniques developed in the latest studies of divertor detachment. Exploration missions to the Solar System’s gaseous giants and hyperbolic re-entries into the Earth’s atmosphere require spacecraft that can withstand high velocity (>10 km/s), high heat fluxes (>10 MW/m2), and corresponding enthalpies. Ablative materials have been used as thermal shields to protect the spacecraft from severe heating during entry. However, developing high enthalpy ablating materials is challenging due to the lack of adequate ground testing facilities. Our team stated that the performance of candidate shielding materials could be assessed in a laboratory environment with multiple in-situ diagnostics, which was enabled by the progress in the tokamak research. Modern machines feature relatively long discharges (~10 s) with well-controlled stable plasma conditions at the edge where the heat flux and the flow speed are similar to those experienced during atmospheric entries. The experiments were carried out at the DIII-D National Fusion Facility in San Diego, CA, operated by General Atomics (GA) for the DoE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Neutral Metals in the Atmosphere of HD 149026b

Recent progress in high-dispersion spectroscopy has revealed the presence of vaporized heavy metals and ions in the atmosphere of hot Jupiters whose dayside temperature is larger than 2000 K, categorized as ultrahot Jupiters (UHJs). Using the archival data of high-resolution transmission spectroscopy obtained with the Subaru telescope, we searched for neutral metals in HD 149026b, a hot Jupiter cooler than UHJs. By removing stellar and telluric absorption and using a cross-correlation technique, we report a tentative detection of neutral titanium with 4.4σ and a marginal signal of neutral iron with 2.8σ in the atmosphere. This is the first detection of neutral titanium in an exoplanetary atmosphere. In this temperature range, titanium tends to form titanium oxide (TiO). The fact that we did not detect any signal from TiO suggests that the C/O ratio in the atmosphere is higher than the solar value. The detection of metals in the atmosphere of hot Jupiters cooler than UHJs will be useful for understanding the atmospheric structure and formation history of hot Jupiters.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Planet Formation by Gas-assisted Accretion of Small Solids

We compute the accretion efficiency of small solids, with radii 1 cm ≤ R s ≤ 10 m, on planets embedded in gaseous disks. Planets have masses 3 ≤ M p ≤ 20 Earth masses (M ⊕ ) and orbit within 10 au of a solar mass star. Disk thermodynamics is modeled via 3D radiation-hydrodynamics calculations that typically resolve the planetary envelopes. Both icy and rocky solids are considered, explicitly modeling their thermodynamic evolution. The maximum efficiencies of 1 ≤ R s ≤ 100 cm particles are generally ≲10%, whereas 10 m solids tend to accrete efficiently or be segregated beyond the planet’s orbit. A simplified approach is applied to compute the accretion efficiency of small cores, with masses M p ≤ 1 M ⊕ and without envelopes, for which efficiencies are approximately proportional to $M^{2/3}_{p}$. The mass flux of solids, estimated from unperturbed drag-induced drift velocities, provides typical accretion rates dM p /dt ≲ 10 -5 M ⊕ yr -1 . In representative disk models with an initial gas-to-dust mass ratio of 70–100 and total mass of 0.05–0.06 M ⊙ , the solids’ accretion falls below 10 -6 M ⊕ yr -1 after 1–1.5 Myr. The derived accretion rates, as functions of time and planet mass, are applied to formation calculations that compute dust opacity self-consistently with the delivery of solids to the envelope. Assuming dust-to-solid coagulation times of ≈0.3 Myr and disk lifetimes of ≈3.5 Myr, heavy-element inventories in the range 3–7 M ⊕ require that ≈90–150 M ⊕ of solids cross the planet’s orbit. The formation calculations encompass a variety of outcomes, from planets a few times M ⊕ , predominantly composed of heavy elements, to giant planets. The peak luminosities during the epoch of the solids’ accretion range from ≈10 -7 to ≈10 -6 L ⊙ .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Reducing Ground-based Astrometric Errors with Gaia and Gaussian Processes

Stochastic field distortions caused by atmospheric turbulence are a fundamental limitation to the astrometric accuracy of ground-based imaging. This distortion field is measurable at the locations of stars with accurate positions provided by the Gaia DR2 catalog; we develop the use of Gaussian process regression (GPR) to interpolate the distortion field to arbitrary locations in each exposure. We introduce an extension to standard GPR techniques that exploits the knowledge that the 2D distortion field is curl-free. Applied to several hundred 90 s exposures from the Dark Energy Survey as a test bed, we find that the GPR correction reduces the variance of the turbulent astrometric distortions ≈12× , on average, with better performance in denser regions of the Gaia catalog. The rms per-coordinate distortion in the riz bands is typically ≈7 mas before any correction and ≈2 mas after application of the GPR model. The GPR astrometric corrections are validated by the observation that their use reduces, from 10 to 5 mas rms, the residuals to an orbit fit to riz-band observations over 5 yr of the r = 18.5 trans-Neptunian object Eris. We also propose a GPR method, not yet implemented, for simultaneously estimating the turbulence fields and the 5D stellar solutions in a stack of overlapping exposures, which should yield further turbulence reductions in future deep surveys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

A resolved study of the inner regions of nearby galaxies with an excess of young massive stars: missing link in the AGN–starburst connection?

ABSTRACT We have selected galaxies with very high levels of H α emission (EQW(H α) >700 Å.) in their central regions from the final data release of the MaNGA survey. Our study focuses on 14 very well-resolved nearby galaxies with stellar masses in the range 9.5 < log M*/(M⊙) < 11.5. We investigate a variety of procedures for selecting galaxy regions that are likely to harbour excess populations of young massive stars, finding that selection in the 2D space of extinction-corrected H α EQW and [S iii]/[S ii] line ratio produces the best results. By comparing stacked spectra covering these regions with stacked spectra covering normal starburst regions with 100 Å<EQW(H α) <200 Å, we obtain the following main results: (1) Clear signatures of excess Wolf–Rayet stars are found in half of the H α excess regions, (2) galaxy regions containing excess Wolf–Rayet stars are more often associated with the presence of high-ionization emission lines characteristic of accreting black holes. Excess [Ne iii] is detected in 4 out of 8 of the WR regions and there are tentative [Fe x] detections in 2 galaxies. (3) Regions of the galaxy with excess Wolf–Rayet stars are located where the interstellar medium has larger ionized gas turbulent velocities and higher neutral gas overdensities. We make a first attempt to constrain changes in the high-mass end of the stellar initial mass function (IMF) using the HR-pyPopStar evolutionary population synthesis models that include high-wavelength-resolution theoretical atmosphere libraries for Wolf–Rayet stars.

Kauffmann, Guinevere↗
DOE OSTI2020

High-resolution Spectroscopic Study of Dwarf Stars in the Northern Sky: Lithium, Carbon, and Oxygen Abundances

Abundances of lithium, carbon, and oxygen have been derived using spectral synthesis for a sample of 249 bright F, G, and K Northern Hemisphere dwarf stars from the high-resolution spectra acquired with the VUES spectrograph at the $Mol\dot{e}tai$ Astronomical Observatory of Vilnius University. The sample stars have metallicities, effective temperatures, and ages between (–0.7 ÷ 0.4) dex, (5000 ÷ 6900) K, (1 ÷ 12) Gyr, accordingly. We confirm a so far unexplained lithium abundance decrease at supersolar metallicities—A(Li) in our sample stars, which drop by 0.7 dex in the [Fe/H] range from +0.10 to +0.55 dex. Furthermore, we identified stars with similar ages, atmospheric parameters, and rotational velocities, but with significantly different lithium abundances, which suggests that additional specific evolutionary factors should be taken into account while interpreting the stellar lithium content. Nine stars with predominantly supersolar metallicities, i.e., about 12% among 78 stars with C and O abundances determined, have the C/O number ratios larger than 0.65, thus may form carbon-rich rocky planets. Ten planet-hosting stars, available in our sample, do not show a discernible difference from the stars with no planets detected regarding their lithium content.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Occultation of a Large Star by the Large Plutino (28978) Ixion on 2020 October 13 UTC

We observed the occultation of the star Gaia DR2 4056440205544338944 by (28978) Ixion. The event was observed from two Lowell Observatory sites, using the 4.3 m Lowell Discovery Telescope (LDT), near Happy Jack, AZ, USA, and a 0.32 m telescope co-mounted with the Titan Monitoring telescope on Lowell’s Mars Hill campus in Flagstaff, AZ. The LDT chord, at 44.86 s, was roughly 30% longer than the longest predicted possible chord. Under the assumption of a spherical body, Ixion’s fitted diameter D = 709.6 ± 0.2 km. The LDT light-curve profile was used to place an upper limit on the surface pressure P < 2 μbar on any possible atmosphere of Ixion. At the distance of Ixion, the occulted star had a fitted projected diameter of 19.25 ± 0.3 km assuming uniform disk illumination, giving a stellar angular diameter of 0.675 ± 0.010 mas. Using the Gaia EDR3 parallax of 0.565 mas, the stellar radius is 130{sub −17}{sup +20} R{sub ⊙}. The measured size is consistent with prior spectral classification of this star as a reddened mid-M giant. This is one of only a modest number of M5 III stars to have a directly measured diameter, and is more distant than most.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Updated Parameters and a New Transmission Spectrum of HD 97658b

Recent years have seen increasing interest in the characterization of sub-Neptune-sized planets because of their prevalence in the Galaxy, contrasted with their absence in our solar system. HD 97658 is one of the brightest stars hosting a planet of this kind, and we present the transmission spectrum of this planet by combining four Hubble Space Telescope transits, 12 Spitzer/IRAC transits, and eight MOST transits of this system. Our transmission spectrum has a higher signal-to-noise ratio than those from previous works, and the result suggests that the slight increase in transit depth from wavelength 1.1–1.7 μm reported in previous works on the transmission spectrum of this planet is likely systematic. Nonetheless, our atmospheric modeling results are inconclusive, as no model provides an excellent match to our data. Nonetheless, we find that atmospheres with high C/O ratios (C/O ≳ 0.8) and metallicities of ≳100× solar metallicity are favored. We combine the mid-transit times from all of the new Spitzer and MOST observations and obtain an updated orbital period of P = 9.489295 ± 0.000005, with a best-fit transit time center at T {sub 0} = 2456361.80690 ± 0.00038 (BJD). No transit timing variations are found in this system. We also present new measurements of the stellar rotation period (34 ± 2 days) and stellar activity cycle (9.6 yr) of the host star HD 97658. Finally, we calculate and rank the Transmission Spectroscopy Metric of all confirmed planets cooler than 1000 K and with sizes between 1 R {sub ⊕} and 4 R {sub ⊕}. We find that at least a third of small planets cooler than 1000 K can be well characterized using James Webb Space Telescope, and of those, HD 97658b is ranked fifth, meaning that it remains a high-priority target for atmospheric characterization.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Stellar Characterization and Radius Inflation of Hyades M-dwarf Stars from the APOGEE Survey

We present a spectroscopic analysis of a sample of 48 M-dwarf stars (0.2 M ⊙ < M < 0.6 M ⊙ ) from the Hyades open cluster using high-resolution H-band spectra from the Sloan Digital Sky Survey/Apache Point Observatory Galactic Evolution Experiment (APOGEE) survey. Our methodology adopts spectrum synthesis with LTE MARCS model atmospheres, along with the APOGEE Data Release 17 line list, to determine effective temperatures, surface gravities, metallicities, and projected rotational velocities. The median metallicity obtained for the Hyades M dwarfs is [M/H] = 0.09 ± 0.03 dex, indicating a small internal uncertainty and good agreement with optical results for Hyades red giants. Overall, the median radii are larger than predicted by stellar models by 1.6% ± 2.3% and 2.4% ± 2.3%, relative to a MIST and DARTMOUTH isochrone, respectively. We emphasize, however, that these isochrones are different, and the fractional radius inflation for the fully and partially convective regimes have distinct behaviors depending on the isochrone. Using a MIST isochrone there is no evidence of radius inflation for the fully convective stars, while for the partially convective M dwarfs the radii are inflated by 2.7% ± 2.1%, which is in agreement with predictions from models that include magnetic fields. For the partially convective stars, rapid rotators present on average higher inflation levels than slow rotators. The comparison with SPOTS isochrone models indicates that the derived M-dwarf radii can be explained by accounting for stellar spots in the photosphere of the stars, with 76% of the studied M dwarfs having up to 20% spot coverage, and the most inflated stars with ~20%–40% spot coverage.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Performance Verification of the EXtreme PREcision Spectrograph

The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial-velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial-velocity measurement precision of EXPRES, with a focused discussion of individual terms in the instrument error budget. We find that EXPRES can reach a single-measurement instrument calibration precision better than 10 cm s{sup −1}, not including photon noise from stellar observations. We also report on the performance of the various environmental, mechanical, and optical subsystems of EXPRES, assessing any contributions to radial-velocity error. For atmospheric and telescope related effects, this includes the fast tip-tilt guiding system, atmospheric dispersion compensation, and the chromatic exposure meter. For instrument calibration, this includes the laser fRequency comb (LFC), flat-field light source, CCD detector, and effects in the optical fibers. Modal noise is mitigated to a negligible level via a chaotic fiber agitator, which is especially important for wavelength calibration with the LFC. Regarding detector effects, we empirically assess the impact on the radial-velocity precision due to pixel-position nonuniformities and charge transfer inefficiency (CTI). EXPRES has begun its science survey to discover exoplanets orbiting G-dwarf and K-dwarf stars, in addition to transit spectroscopy and measurements of the Rossiter–McLaughlin effect.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

High-contrast Thermal Infrared Spectroscopy with ALES: The 3–4 μm Spectrum of κ Andromedae b

We present the first L-band (2.8–4.1 μm) spectroscopy of κ Andromedae b, a ~20 M Jup companion orbiting at 1" projected separation from its B9-type stellar host. We combine our Large Binocular Telescope (LBT) Arizona Lenslets for Exoplanet Spectroscopy (ALES) integral field spectrograph data with measurements from other instruments to analyze the atmosphere and physical characteristics of κ And b. We report a discrepancy of ~20% (2σ) in the L' flux of κ And b when comparing to previously published values. We add an additional L' constraint using an unpublished imaging data set collected in 2013 using the LBT Interferometer/LMIRCam, the instrument in which the ALES module has been built. The LMIRCam measurement is consistent with the ALES measurement, both suggesting a fainter L-band scaling than previous studies. The data, assuming the flux scaling measured by ALES and LMIRCam imaging, are well fit by an L3-type brown dwarf. Atmospheric model fits to measurements spanning 0.9–4.8 μm reveal some tension with the predictions of evolutionary models, but the proper choice of cloud parameters can provide some relief. In particular, models with clouds extending to very low pressures composed of grains ≤1 μm appear to be necessary. If the brighter L' photometry is accurate, there is a hint that subsolar metallicity may be required.

79 ASTRONOMY AND ASTROPHYSICS↗