Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPACECRAFT MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

A Preliminary Model for Spacecraft Propulsion Performance Analysis Based on Nuclear Gain and Subsystem Mass-Power Balances

A preliminary model for spacecraft propulsion performance analysis based on nuclear gain and subsystem mass-power balances are presented in viewgraph form. For very fast missions with straight-line trajectories, it has been shown that mission trip time is proportional to the cube root of alpha. Analysis of spacecraft power systems via a power balance and examination of gain vs. mass-power ratio has shown: 1) A minimum gain is needed to have enough power for thruster and driver operation; and 2) Increases in gain result in decreases in overall mass-power ratio, which in turn leads to greater achievable accelerations. However, subsystem mass-power ratios and efficiencies are crucial: less efficient values for these can partially offset the effect of nuclear gain. Therefore, it is of interest to monitor the progress of gain-limited subsystem technologies and it is also possible that power-limited systems with sufficiently low alpha may be competitive for such ambitious missions. Topics include Space flight requirements; Spacecraft energy gain; Control theory for performance; Mission assumptions; Round trips: Time and distance; Trip times; Vehicle acceleration; and Minimizing trip times.

Chakrabarti, Suman↗
NASA NTRS1977

Dynamic modeling of spacecraft in a collisionless plasma

A new computational model is described which can simulate the charging of complex geometrical objects in three dimensions. Two sample calculations are presented. In the first problem, the capacitance to infinity of a complex object similar to a satellite with solar array paddles is calculated. The second problem concerns the dynamical charging of a conducting cube partially covered with a thin dielectric film. In this calculation, the photoemission results in differential charging of the object.

Katz, I.↗
NASA NTRS1988

Overview of SDCM - The Spacecraft Design and Cost Model

The Spacecraft Design and Cost Model (SDCM) is a computer-aided design and analysis tool for synthesizing spacecraft configurations, integrating their subsystems, and generating information concerning on-orbit servicing and costs. SDCM uses a bottom-up method in which the cost and performance parameters for subsystem components are first calculated; the model then sums the contributions from individual components in order to obtain an estimate of sizes and costs for each candidate configuration within a selected spacecraft system. An optimum spacraft configuration can then be selected.

Ferebee, Melvin J.↗
NASA NTRS2011

A Hyperbolic Ontology Visualization Tool for Model Application Programming Interface Documentation

Spacecraft modeling, a critically important portion in validating planned spacecraft activities, is currently carried out using a time consuming method of mission to mission model implementations and integration. A current project in early development, Integrated Spacecraft Analysis (ISCA), aims to remedy this hindrance by providing reusable architectures and reducing time spent integrating models with planning and sequencing tools. The principle objective of this internship was to develop a user interface for an experimental ontology-based structure visualization of navigation and attitude control system modeling software. To satisfy this, a number of tree and graph visualization tools were researched and a Java based hyperbolic graph viewer was selected for experimental adaptation. Early results show promise in the ability to organize and display large amounts of spacecraft model documentation efficiently and effectively through a web browser. This viewer serves as a conceptual implementation for future development but trials with both ISCA developers and end users should be performed to truly evaluate the effectiveness of continued development of such visualizations.

mission operations system (MOS)↗
NASA NTRS1977

Pioneer Venus spacecraft charging model

Five environmental models were constructed to represent the solar wind and the upper, middle, and lower ionosphere of Venus. The spacecraft structure was modeled with over 140 passive electrical elements representing structural elements of the spacecraft. Electron, ion, secondary electron, and photocurrents to the spacecraft from the plasma were calculated, ignoring sheath effects. In all but one case, potentials of interest were less than 1 volt. Potential differences between widely separated points on the equipment shelf were less than 1 mV. The one area of concern is the solar panel potential when the orbiter is passing through the bowshock region.

Robinson, P. A., Jr.↗
NASA NTRS2011

Methodology for Developing a Probabilistic Risk Assessment Model of Spacecraft Rendezvous and Dockings

In 2007 NASA was preparing to send two new visiting vehicles carrying logistics and propellant to the International Space Station (ISS). These new vehicles were the European Space Agency s (ESA) Automated Transfer Vehicle (ATV), the Jules Verne, and the Japanese Aerospace and Explorations Agency s (JAXA) H-II Transfer Vehicle (HTV). The ISS Program wanted to quantify the increased risk to the ISS from these visiting vehicles. At the time, only the Shuttle, the Soyuz, and the Progress vehicles rendezvoused and docked to the ISS. The increased risk to the ISS was from an increase in vehicle traffic, thereby, increasing the potential catastrophic collision during the rendezvous and the docking or berthing of the spacecraft to the ISS. A universal method of evaluating the risk of rendezvous and docking or berthing was created by the ISS s Risk Team to accommodate the increasing number of rendezvous and docking or berthing operations due to the increasing number of different spacecraft, as well as the future arrival of commercial spacecraft. Before the first docking attempt of ESA's ATV and JAXA's HTV to the ISS, a probabilistic risk model was developed to quantitatively calculate the risk of collision of each spacecraft with the ISS. The 5 rendezvous and docking risk models (Soyuz, Progress, Shuttle, ATV, and HTV) have been used to build and refine the modeling methodology for rendezvous and docking of spacecrafts. This risk modeling methodology will be NASA s basis for evaluating the addition of future ISS visiting spacecrafts hazards, including SpaceX s Dragon, Orbital Science s Cygnus, and NASA s own Orion spacecraft. This paper will describe the methodology used for developing a visiting vehicle risk model.

Farnham, Steven J., II↗
NASA NTRSDate not supplied

Validation of Transient Spacecraft Refueling Model with Gateway Breadboard Test Data

The ability to refuel spacecraft on-orbit is a key enabling technology for deep space human exploration. On-orbit refueling requires priming a pressurized liquid propellant from a source tank into fluid transfer lines at vacuum conditions, which could result in excessive surge pressures beyond the system’s qualified operating limits and potentially damage hardware. Therefore, it is imperative to employ numerical models during the development of flight hardware to parametrically characterize system performance over a wide range of operating conditions. Since priming transients are difficult to model accurately, it is important to validate those models with test data. As part of the Gateway bipropellant refueling system development, a simplified fluidic breadboard system was created using water as a simulant for fuel to support early program risk reduction of refueling operations. The objectives of breadboard testing were to gather performance data to characterize and demonstrate critical refueling operations and to validate numerical models that can be extended to predicting flight system performance. A description of the breadboard test system and the results of numerical model validation is presented. The model is shown to have very good agreement with test data.

Brian S Lusby↗
NASA NTRSDate not supplied

Validation of Transient Spacecraft Refueling Model with Gateway Breadboard Test Data

The ability to refuel spacecraft on-orbit is a key enabling technology for deep space human exploration. On-orbit refueling requires priming a pressurized liquid propellant from a source tank into fluid transfer lines at vacuum conditions, which could result in excessive surge pressures beyond the system’s qualified operating limits and potentially damage hardware. Another source of potentially damaging surge pressures is the water hammer transient that occurs when the isolation valves are closed to pause or end the refueling operation. Therefore, it is imperative to employ numerical models during the development of flight hardware to parametrically characterize system performance over a wide range of operating conditions to minimize the risk of exceeding pressure limits during flight. Since rapid pressure transients can be difficult to model accurately, it is important to validate those models with test data. As part of the Gateway bipropellant refueling system development, a simplified fluidic breadboard system was created using water as a simulant for fuel to support early program risk reduction of refueling operations. The objectives of breadboard testing were to gather performance data to characterize and demonstrate critical refueling operations and to validate numerical models that can be extended to predicting flight system performance. A description of the breadboard test article and the results of numerical model validation is presented. The model is shown to have very good agreement with test data.

Refueling↗
NASA NTRS2019

Follow-on studies using the Voyager spacecraft thermal model

The 42-year-old Voyager mission, now named the Voyager Interstellar Mission (VIM) is operating long beyond its design life. In 2012, Voyager 1 crossed the heliopause into interstellar space and Voyager 2 made the same transit in November 2018. Due to declining power output from the Radioisotope Thermoelectric Generators (RTGs) the Science and Flight Operations teams continue to make difficult choices in terms of managing both the power and thermal margins to preserve critical science observations and maintain the health of the two spacecraft. A previous paper, “Creating a Voyager Thermal Model 39 Years Into the Flight Mission, Along With Model Correlation and Application” described how a thermal model of these 1977 spacecraft was developed and correlated without many design artifacts and with limited temperature telemetry. This paper describes how the thermal model has been used to establish an Allowable Flight Temperature (AFT) limit for hydrazine propellant in the propulsion subsystem to minimize the risk of freezing. Voyager 2 temperatures have already descended to this limit in the vicinity of the Roll thruster propellant lines. The Flight Operations team has investigated several ways of detecting propellant freezing based on analysis and trending of thruster performance telemetry. In addition, the Voyager thermal model is being used to predict the spacecraft response to possible changes in power state. These changes could involve turning off outboard science instruments and/or their heaters to increase power margin and hence power dissipation inside the spacecraft bus (i.e. in Bay 7, where the power regulation electronics are located). Changes might also be made to turn on or off other loads inside the bus to more effectively heat the coldest propellant lines.

Medina, Enrique↗
NASA NTRS2019

Follow-on studies using the Voyager spacecraft thermal model

The 42-year-old Voyager mission, now named the Voyager Interstellar Mission (VIM) is operating long beyond its design life. In 2012, Voyager 1 crossed the heliopause into interstellar space and Voyager 2 made the same transit in November 2018. Due to declining power output from the Radioisotope Thermoelectric Generators (RTGs) the Science and Flight Operations teams continue to make difficult choices in terms of managing both the power and thermal margins to preserve critical science observations and maintain the health of the two spacecraft. A previous paper, “Creating a Voyager Thermal Model 39 Years Into the Flight Mission, Along With Model Correlation and Application” described how a thermal model of these 1977 spacecraft was developed and correlated without many design artifacts and with limited temperature telemetry. This paper describes how the thermal model has been used to establish an Allowable Flight Temperature (AFT) limit for hydrazine propellant in the propulsion subsystem to minimize the risk of freezing. Voyager 2 temperatures have already descended to this limit in the vicinity of the Roll thruster propellant lines. The Flight Operations team has investigated several ways of detecting propellant freezing based on analysis and trending of thruster performance telemetry. In addition, the Voyager thermal model is being used to predict the spacecraft response to possible changes in power state. These changes could involve turning off outboard science instruments and/or their heaters to increase power margin and hence power dissipation inside the spacecraft bus (i.e. in Bay 7, where the power regulation electronics are located). Changes might also be made to turn on or off other loads inside the bus to more effectively heat the coldest propellant lines. Many of these changes have been or will be tested first on Voyager 1 which has more power margin and does not have the power matrix commanding issues experienced on Voyager 2. Ultimately this assessment may assist the Voyager project in making decisions on the order in which science instruments are permanently turned off.

Medina, Enrique↗
NASA NTRSDate not supplied

Reduced-order Modeling for Spacecraft Thermal-structural Applications

Leveraging the speed of reduced-order models (ROMs), thermal analysis teams have previously had access to rapid optimization, sensitivity studies, rapid model correlation, and uncertainty quantification, to name a few. An advantage of the developed approach is its relative robustness, which enabled expansion to include structural models in addition to thermal models leading to both rapid thermal-structural and rapid structural-only analyses. This method was tested for a sample thermal-structural application and showed good performance. It was then applied to a complex NASA mission and showed how ROMs could be used to quickly evaluate system uncertainties. Finally, these methods were applied to a structural-only application and used to better optimize and understand the structural design.

Derek Hengeveld↗
NASA NTRS1998

Comparison of Spacecraft Contamination Models with Well-Defined Flight Experiment

The report presents analyzed surface areas on particular experiment trays from the Long Duration Exposure Facility (LDEF) for silicone-based molecular contamination. The trays for examination were part of the Ultra-Heavy Cosmic Ray Experiment (UHCRE). These particular trays were chosen because each tray was identical to the others in construction, and the materials on each tray were well known, documented, and characterized. In particular, a known specific source of silicone contamination was present on each tray. Only the exposure conditions varied from tray to tray. The results of post-flight analyses of surfaces of three trays were compared with the predictions of the three different spacecraft molecular contamination models. Phase one tasks included: 1) documenting the detailed geometry of the hardware; 2) determining essential properties of the anodized aluminum, Velcro(Tm), silverized Teflon(Tm), silicone gaskets, and DC6-1104(Tm) silicone adhesive materials used to make the trays, tray covers, and thermal control blankets; 3) selecting and removing areas from each tray; and 4) beginning surface analysis of the selected tray walls. Phase two tasks included: 1) completion of surface analysis measurements of the selected tray surface, 2) obtaining auger depth profiles at selected locations, and 3) running versions of the ISEM, MOFLUX, and PLIMP (Plume Impingement) contamination prediction models and making comparisons with experimental results.

Pippin, G. H.↗
NASA NTRS2004

Modeling of Spacecraft Advanced Chemical Propulsion Systems

This paper outlines the development of the Advanced Chemical Propulsion System (ACPS) model for Earth and Space Storable propellants. This model was developed by the System Technology Operation of SAIC-Huntsville for the NASA MSFC In-Space Propulsion Project Office. Each subsystem of the model is described. Selected model results will also be shown to demonstrate the model's ability to evaluate technology changes in chemical propulsion systems.

Benfield, Michael P. J.↗
NASA NTRS2004

Modeling of Spacecraft Advanced Chemical Propulsion Systems

This paper outlines the development of the Advanced Chemical Propulsion System (ACPS) model for Earth and Space Storable propellants. This model was developed by the System Technology Operation of SAIC-Huntsville for the NASA MSFC In-Space Propulsion Project Office. Each subsystem of the model is described. Selected model results will also be shown to demonstrate the model's ability to evaluate technology changes in chemical propulsion systems.

Benfield, Michael P. J.↗
NASA NTRS1973

Dynamical models for a spacecraft idealized as a set of multi-hinged rigid bodies

A brief description is presented of a canonical set of equations which governs the behavior of an n-body spacecraft. General results are given for the case in which the spacecraft is modeled in terms of n rigid bodies connected by dissipative elastic joints. The final equations are free from constraint torques and involve only r variables (r is the number of degrees of freedom of the system). An advantage which accompanies the elimination of the constraint torques is a decrease in the computer run time (especially when n is large).

Larson, V.↗
NASA NTRS1977

An altitude-dependent spacecraft charging model

A model for the altitude dependence of the hot plasma parameters responsible for the electrostatic charging of spacecraft was developed. Based upon plasma orbit theory, the directed velocity is a function of the ambient magnetic field flux density. A consequence of this approach is that while the thermal velocity distributions (assumed to be Maxwellian) of the plasma particles are independent of the magnetic field strength (and hence altitude), the particle densities increase with magnetic field strength. Thus, according to this model, while the equilibrium voltage is independent of altitude, the charging current density increases with decreasing altitude. However, the probability of such spacecraft charging decreases with decreasing altitude.

Haffner, J. W.↗
NASA NTRS1982

A DSN optimal spacecraft scheduling model

A computer model is described which uses mixed-integer linear programming to provide optimal DSN spacecraft schedules given a mission set and specified scheduling requirements. A solution technique is proposed which uses Bender's Method and a heuristic starting algorithm.

Webb, W. A.↗