Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLAR PLASMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Solar array arcing in plasmas

Solar cells in space plasma conditions are known to arc into the plasma when the interconnects are at a negative potential of a few hundred volts, relative to plasma potential. For cells with silver-coated interconnects, a threshold voltage for arcing exists at about -230 V, as found in both ground and LEO experiments. The arc rate beyond the threshold voltage depends nearly linearly on plasma density, but has a strong power-law dependence on voltage, such that for small increments in operating voltage there is a large increment in arc rate. The arcs generate broadband radio interference and visible light. In ground tests, interconnects have been damaged by arcs in cells having insufficient isolation from a source of high current. Models for the arcs are highly dependent on the choice of interconnect conductor material exposed to the plasma and possibly on the geometry and choice of adjacent insulator material. Finally, new technology solar cells use copper for the cell interconnects, a material which may have a lower arcing threshold voltage than silver. It is expected, from ground tests of simulated solar cells, that any junction of conductor and insulator exposed to space plasma conditions will arc into the plasma at a few hundred volts negative potential, relative to the local plasma.

Ferguson, Dale C.↗

Parasitic current losses due to solar electric propulsion generated plasmas

Solar electric propulsion is a leading candidate for many upcoming space missions. Under many circumstances plasma produced by charge-exchange reactions within the ion beam dominates the ambient environment near the spacecraft. The calculations presented here contain a predictive hydrodynamic model for the charge-exchange plasma expansion, and a fully three-dimensional model for the structure of the plasma sheath around the solar array wing. Results of calculations for several configurations and voltage levels indicate that with kilovolt biases power losses of approximately 10 percent or more are likely, even with only one engine in operation, and that ameliorative measures should focus on the inboard portion of the solar arrays.

Katz, I.↗

Dependence of Lunar Surface Charging on Solar Wind Plasma Conditions and Solar Irradiation

The surface of the Moon is electrically charged by exposure to solar radiation on its dayside, as well as by the continuous flux of charged particles from the various plasma environments that surround it. An electric potential develops between the lunar surface and ambient plasma, which manifests itself in a near-surface plasma sheath with a scale height of order the Debye length. This study investigates surface charging on the lunar dayside and near-terminator regions in the solar wind, for which the dominant current sources are usually from the pohotoemission of electrons, J(sub p), and the collection of plasma electrons J(sub e) and ions J(sub i). These currents are dependent on the following six parameters: plasma concentration n(sub 0), electron temperature T(sub e), ion temperature T(sub i), bulk flow velocity V, photoemission current at normal incidence J(sub P0), and photo electron temperature T(sub p). Using a numerical model, derived from a set of eleven basic assumptions, the influence of these six parameters on surface charging - characterized by the equilibrium surface potential, Debye length, and surface electric field - is investigated as a function of solar zenith angle. Overall, T(sub e) is the most important parameter, especially near the terminator, while J(sub P0) and T(sub p) dominate over most of the dayside.

Photoemission↗

Simulations of Solar Wind Plasma Flow Around a Simple Solar Sail

In recent years, a number of solar sail missions of various designs and sizes have been proposed (e.g., Geostorm). Of importance to these missions is the interaction between the ambient solar wind plasma environment and the sail. Assuming a typical 1 AU solar wind environment of 400 km/s velocity, 3.5 cu cm density, ion temperature of approx.10 eV, electron temperature of 40 eV, and an ambient magnetic field strength of 10(exp -4) G, a first order estimate of the plasma interaction with square solar sails on the order of the sizes being considered for a Geostorm mission (50 m x 50 m and 75 m x 75 m corresponding to approx.2 and approx.3 times the Debye length in the plasma) is carried out. First, a crude current balance for the sail surface immersed in the plasma environment and in sunlight was used to estimate the surface potential of the model sails. This gave surface potentials of approx.10 V positive relative to the solar wind plasma. A 3-D, Electrostatic Particle-in-Cell (PIC) code was then used to simulate the solar wind flowing around the solar sail. It is assumed in the code that the solar wind protons can be treated as particles while the electrons follow a Boltzmann distribution. Next, the electric field and particle trajectories are solved self-consistently to give the proton flow field, the electrostatic field around the sail, and the plasma density in 3-D. The model sail was found to be surrounded by a plasma sheath within which the potential is positive compared to the ambient plasma and followed by a separate plasma wake which is negative relative to the plasma. This structure departs dramatically from a negatively charged plate such as might be found in the Earth s ionosphere on the night side where both the plate and its negative wake are contiguous. The implications of these findings are discussed as they apply to the proposed Geostorm solar sail mission.

Garrett, Henry B.↗

Parker Solar Probe Observations of High Plasma β Solar Wind From the Streamer Belt

In general, slow solar wind from the streamer belt forms a high plasma β equatorial plasma sheet around the heliospheric current sheet (HCS) crossing, namely, the heliospheric plasma sheet (HPS). Current Parker Solar Probe (PSP) observations show that the HCS crossings near the Sun could be full or partial current sheet (PCS) crossings, and they share some common features but also have different properties. In this work, using the PSP observations from encounters 4–10, we identify streamer belt solar wind from enhancements in plasma β, and we further use electron pitch angle distributions to separate it into HPS solar wind around the full HCS crossings and PCS solar wind in the vicinity of PCS crossings. Based on our analysis, we find that the PCS solar wind has different characteristics as compared with HPS solar wind: (a) the PCS solar wind could be non-pressure-balanced structures rather than magnetic holes, and the total pressure enhancement mainly results from the less reduced magnetic pressure; (b) some of the PCS solar wind is mirror-unstable; and (c) the PCS solar wind is dominated by very low helium abundance but varied alpha–proton differential speed. We suggest that the PCS solar wind could originate from coronal loops deep inside the streamer belt, and it is pristine solar wind that still actively interacts with ambient solar wind; thus, it is valuable for further investigations of the heating and acceleration of slow solar wind.

Slow solar wind↗

Solar wind-plasma interaction: The AMPTE solar wind plasma releases

In situ measurements during AMPTE solar wind ion releases are described. The creation of a diamagnetic cavity, compression and draping of magnetic field lines, recoil of the entire artificial comet, and ion beam and tail formation are discussed. The wave measurements were used to determine the time variation of the plasma density from the measurement of the electron plasma frequency and to determine the state of cloud expansion and cavity formation. Features found include absence of strong turbulence and anomalous diffusion in the cavity boundary, and the appearance of very intense shock-like emission in front of the plasma clouds. The first effect suggests partially unknowm processes leading to magnetic field penetration into the region of the clouds. The direct observation of the interaction processes between the fast streaming solar wind plasma and the expanding cloud plasma of the Li and artificial comet releases may have relevance to astrophysical situations as, for instance, encountered in solar flares, interstellar clouds, or during accretion of matter onto compact objects.

Source record↗

Solar wind-plasma interaction - The AMPTE solar wind plasma releases

A summary is given of the most important effects observed during the 3 AMPTE solar wind ion releases. Some of these effects may be of relevance in comparable astrophysical situations when large amounts of matter are injected into an ambient magnetized plasma streaming with a velocity much larger than the sonic and Alfvenic Mach numbers. For detailed presentations the reader is referred to the original publications listed in the References.

Bauer, O. H.↗

The Ulysses solar wind plasma experiment

The scientific objectives of the Ulysses solar wind plasma experiment, termed the Solar Wind Observations Over the Poles of the Sun (SWOOPS) include measurements of the solar-wind global properties, the nonlinear MHD disturbances in the solar wind, the internal state of the solar wind plasma, and the solar-wind interaction with Jupiter's magnetic field. In this paper, special attention is given to the two instrumental packages of SWOOPS experiment that will simultaneously perform measurements on electrons and ions of solar plasma: the ion analyzer and the electron analyzer. Results obtained in the initial phases of the SWOOPS experiment are presented.

Bame, S. J.↗

The ISPM solar-wind plasma experiment

The ISPM solar wind plasma experiment accurately characterizes the bulk flow and internal state conditions of the interplanetary plasma in three dimensions at all heliographic distances and heliographic latitudes reached by the spacecraft. Solar wind electrons, protons, alpha particles, and heavier ions are measured. Oxygen, silicon, and iron ions at various charge levels are resolved. Electrons and ions are measured simultaneously with independent curved-plate electrostatic analysers equipped with multiple continuous channel electron multipliers arranged so that particle velocity distributions are suitably resolved without gaps in spacecraft polar-angle space. Electrons with energies between 1 and 900 eV are detected at 7 polar angles and various combinations of azimuth angle to cover the unit sphere comprehensively. Ions are detected between 257 eV/Q and 35 keV/Q. Data matrices are obtained every 4 min when the spacecraft is actively transmitting and every 8 min during storage periods. These matrices contain sufficient energy and angle resolution to permit detailed calculations of ion velocity distributions.

Bame, S. J.↗

Ulysses solar wind plasma observations during the declining phase of solar cycle 22

Since launch in October 1990, the Ulysses mission has included an in-ecliptic cruise enroute to Jupiter encounter in February 1992 and a post-Jupiter transit through a wide range of southerly latitudes and heliocentric distances. Here we present results from the solar wind plasma experiment through June 14, 1994, at which time Ulysses was at -68.2 deg heliographic latitude. During the ecliptic phase of the mission, occurring just after solar maximum, the spacecraft encountered an irregular pattern of solar wind speed and sporadic coronal mass ejections, with mass ejections most prevalent during March 1991. Irregular, small-amplitude solar wind streams prevailed until mid-1992, after which Ulysses encountered a recurrent very high-speed stream from an equatorward extension of the South polar coronal hole. Encounters with the high-density, low-speed plasma from the coronal streamer belt ceased as Ulysses moved to increasing southerly latitudes in 1993. Many forward and reverse shocks associated with corotating interaction regions have been encountered; these shocks all had observable electron foreshocks. The shocks became less prevalent with increasing latitude, with the forward shocks disappearing first because of the tilted streamer belt and the resulting meridional shock propagation. After Ulysses passed -35 deg in July 1993 the spacecraft encountered only high-speed wind, with a speed range of 700-800 km/s and a density, scaled to 1 AU, averaging 3/cu cm. Latitudinal gradients in solar wind fluid parameters generally support previous findings, with the gradient in wind speed offset by a gradient in density such that mass momentum flux vary relatively little.

Phillips, J. L.↗