SEARCH · Engineering Papers

Results for “SO3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

87 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS2008

Sulfur and Iron Speciation in Gas-rich Impact-melt Glasses from Basaltic Shergottites Determined by Microxanes

Sulfur is abundantly present as sulfate near Martian surface based on chemical and mineralogical investigations on soils and rocks in Viking, Pathfinder and MER missions. Jarosite is identified by Mossbauer studies on rocks at Meridian and Gusev, whereas MgSO4 is deduced from MgO - SO3 correlations in Pathfinder MER and Viking soils. Other sulfate minerals such as gypsum and alunogen/ S-rich aluminosilicates and halides are detected only in martian meteorites such as shergottites and nakhlites using SEM/FE-SEM and EMPA techniques. Because sulfur has the capacity to occur in multiple valence states, determination of sulfur speciation (sulfide/ sulfate) in secondary mineral assemblages in soils and rocks near Mars surface may help us understand whether the fluid-rock interactions occurred under oxidizing or reducing conditions. To understand the implications of these observations for the formation of the Gas-rich Impact-melt (GRIM) glasses, we determined the oxidation state of Fe in the GRIM glasses using Fe K micro-XANES techniques.

Sutton, S. R.↗

NASA NTRS2009

Fluid-Evaporation Records Preserved in Meridiani Rocks

We have shown earlier that the high SO3/Cl ratios found in secondary mineral assemblages in shergottite GRIM glasses (Gas-Rich Impact-Melt) likely resulted from interactions of regolith materials with sulfate-rich (and Cl-poor) solutions. The low SO3/Cl ratios determined in secondary salts in nakhalite fracture-fillings presumably formed by rock interactions with chloride-rich (and SO4-poor) solutions near Mars surface. The SO3 and Cl abundances determined by APXS in abraded rocks (RAT) from Endurance, Fram and Eagle craters indicate that these salt assemblages likely formed by evaporative concentration of brine fluids at Meridiani. The SO3/Cl ratios in the abraded rocks are examined here, instead of their absolute abundances, because the abundance ratios might provide better guide-lines for tracking the evolution of evaporating fluids at Meridiani. The SO3/Cl ratios in these samples, in turn, might provide clues for the mobile element ratios of the altering fluids that infiltrated into the Meridiani rocks.

Rao, M. N.↗

NASA NTRS2007

Norbornene-Based Polymer Electrolytes for Lithium Cells

Norbornene-based polymers have shown promise as solid electrolytes for lithium-based rechargeable electrochemical cells. These polymers are characterized as single-ion conductors. Single-ion-conducting polymers that can be used in lithium cells have long been sought. Single-ion conductors are preferred to multiple-ion conductors as solid electrolytes because concentration gradients associated with multiple-ion conduction lead to concentration polarization. By minimizing concentration polarization, one can enhance charge and discharge rates. Norbornene sulfonic acid esters have been synthesized by a ring-opening metathesis polymerization technique, using ruthenium-based catalysts. The resulting polymer structures (see figure) include sulfonate ionomers attached to the backbones of the polymer molecules. These molecules are single-ion conductors in that they conduct mobile Li+ ions only; the SO3 anions in these polymers, being tethered to the backbones, do not contribute to ionic conduction. This molecular system is especially attractive in that it is highly amenable to modification through functionalization of the backbone or copolymerization with various monomers. Polymers of this type have been blended with poly(ethylene oxide) to lend mechanical integrity to free-standing films, and the films have been fabricated into solid polymer electrolytes. These electrolytes have been demonstrated to exhibit conductivity of 2 10(exp -5)S/cm (which is high, relative to the conductivities of other solid electrolytes) at ambient temperature, plus acceptably high stability. This type of norbornene-based polymeric solid electrolyte is in the early stages of development. Inasmuch as the method of synthesis of these polymers is inherently flexible and techniques for the fabrication of the polymers into solid electrolytes are amenable to optimization, there is reason to anticipate further improvements.

Cheung, Iris↗

NASA NTRS2010

Stability of Basalt plus Anhydrite plus Calcite at HP-HT: Implications for Venus, the Earth and Mars

"Canali" observed at Venus surface by Magellan are evidence for very long melt flows, but their composition and origin remain uncertain. The hypothesis of water-rich flow is not reasonable regarding the temperature at Venus surface. The length of these channels could not be explained by a silicate melt composition but more likely, by a carbonate-sulfate melt which has a much lower viscosity (Kargel et al 1994). One hypothesis is that calcite CaCO3 and anhydrite CaSO4 which are alteration products of basalts melted during meteorite impacts. A famous example recorded on the Earth (Chicxulub) produced melt and gas rich in carbon and sulfur. Calcite and sulfate evaporites are also present on Mars surface, associated with basalts. An impact on these materials might release C- and S-rich melt or fluid. Another type of planetary phenomenon (affecting only the Earth) might provoke a high pressure destabilization of basalt+anhydrite+calcite. Very high contents of C and S are measured in some Earth s magmas, either dissolved or in the form of crystals (Luhr 2008). As shown by the high H content and high fO2 of primary igneous anhydrite-bearing lavas, the high S content in their source may be explained by subduction of an anhydrite-bearing oceanic crust, either directly (by melting followed by eruption) or indirectly (by release of S-rich melt or fluid that metasomatize the mantle) . Calcite is a major product of oceanic sedimentation and alteration of the crust. Therefore, sulfate- and calcite-rich material may be subducted to high pressures and high temperatures (HP-HT) and release S- and C-rich melts or fluids which could influence the composition of subduction zone lavas or gases. Both phenomena - meteorite impact and subduction - imply HP-HT conditions - although the P-T-time paths are different. Some HP experimental/theoretical studies have been performed on basalt/eclogite, calcite and anhydrite separately or on a combination of two. In this study we performed piston-cylinder experiments at 1 GPa between 950 and 1700 C using a mixture of 70wt% tholeiitic basalt + 15wt% anhydrite + 15wt% calcite. Up to ~1440 C, an ultracalcic (CaO>13.5 wt%; CaO/Al2O3>1 wt%) picrobasaltic (SiO2~40-45 wt%; Na2O+K2O<2 wt%) melt containing up to 5 wt% SO3 and up to 5.3 wt% CO2+H2O (calculated by difference) is present in equilibrium with clinopyroxene, anhydrite, spinel-chromite, a CAS-phase and a gas composed mainly of CO and an aliphatic thiol (CH2)4SH. Hydrogen was incorporated either by contact between the starting material and air or by diffusion through the capsule during the experiments. The S content in the gas increases with temperature and run duration, implying that gases with various C/S ratios might be released during an impact or at subduction zones, depending on the P-T-t path and on the H content. Above approx.1440 C, a Ca-rich carbonate-sulfate melt forms (in equilibrium with the picrobasaltic melt) which contains a few percents of Na and K. Such melt is not expected to form at Earth s subduction temperatures. If it forms by meteorite impact, it might crystallize too fast to explain long flows like Venus canali. A different basalt/anhydrite/calcite ratio might, however, decrease its formation temperature.

Martin, A. M.↗

NASA NTRS2010

The Other Chemistry of the Jovian Icy Satellites - Low Energy and Sulfurous

Spectra of Jupiter's icy satellites reveal surfaces dominated by H2O-ice with minor amounts of SO2 and other materials. The co-existence of H2O and SO2 in surfaces exposed to jovian magnetospheric radiation suggests that sulfuric acid (H2SO4) also could be present. This was noted by Carlson et al. (1999), who supported this suggestion with assignments of near-IR bands in Europa spectra to hydrated H2SO4. Laboratory experiments since have demonstrated radiolytically-driven syntheses in S- and SO2-containing H2O-Ices (Carlson et al., 2002; Moore et al., 2006). In the Cosmic Ice Laboratory, we recently have investigated the thermal chemistry of SO2 trapped in H2O-ice. IR spectra of H2O + SO2 mixtures recorded at 10 to 230 K were used to follow low-temperature reactions in the absence of radiation effects. No SO2 reactions were found at 10 K, but warming to more-relevant Europa temperatures produced both HSO3(-) and S2O5(2-). Added NH3 shifted the product composition toward SO3(2-) and away from the other ions. We find that H2O and SO2 react to produce sulfur oxyanions, such as bisulfite, that as much as 30% of the SO2 can be consumed through this reaction, and that the products remain in the ice when the temperature is lowered, indicating that these reactions are irreversible. Our results suggest that thermally-induced reactions can alter the chemistry at and below the surfaces of the icy satellites in the jovian system.

Hudson, Reggie L.↗

NASA NTRS2012

Chemical and Mineralogical Characterization of Acid-Sulfate Alteration of Basaltic Material on Mauna Kea Volcano, Hawaii: Jarosite and Hydrated Halloysite

Sulfates have been identified on the martian surface during robotic surface exploration and by orbital remote sensing. Measurements at Meridiani Planum (MP) by the Alpha-Particle X-ray Spectrometer (APXS) and Mossbauer (MB) instruments on the Mars Exploration Rover Opportunity document the presence of a ubiquitous sulfate-rich outcrop (20-40% SO3) that has jarosite as an anhydrous Fe3+-sulfate [1- 3]. The presence of jarosite implies a highly acidic (pH <3) formation environment [4]. Jarosite and other sulfate minerals, including kieserite, gypsum, and alunite have also been identified in several locations in orbital remote sensing data from the MEx OMEGA and MRO CRISM instruments [e.g. 5-8]. Acid sulfate weathering of basaltic materials is an obvious pathway for formation of sulfate-bearing phases on Mars [e.g. 4, 9, 10]. In order to constrain acid-sulfate pathways on Mars, we are studying the mineralogical and chemical manifestations of acid-sulfate alteration of basaltic compositions in terrestrial environments. We have previously shown that acidsulfate alteration of tephra under hydrothermal conditions on the Puu Poliahu cone (summit region of Mauna Kea volcano, Hawaii) resulted in jarosite and alunite as sulfate-bearing alteration products [11-14]. Other, more soluble, sulfates may have formed, but were leached away by rain and melting snow. Acidsulfate processes on Puu Poliahu also formed hematite spherules similar (except in size) to the hematite spherules observed at MP as an alteration product [14]. Phyllosilicates, usually smectite }minor kaolinite are also present as alteration products [13]. We discuss here an occurrence of acid-sulfate alteration on Mauna Kea Volcano (Hawaii). We report VNIR spectra (0.35-2.5 microns ASD spectrometer), Mossbauer spectra (MER-like ESPI backscatter spectrometer), powder XRD (PANalytical), and major element chemical compositions (XRF with LOI and Fe redox) for comparison to similar data acquired or to be acquired by MRO-CRISM and MEx OMEGA, MERMB, MSL-CheMin, and MER and MSL APXS, respectively.

Graff, Trevor G.↗

NASA NTRS2013

The XRD Amorphous Component in John Klein Drill Fines at Yellowknife Bay, Gale Crater, Mars

Drill fines of mudstone (targets John Klein and Cumberland) from the Sheepbed unit at Yel-lowknife Bay were analyzed by MSL payload elements including the Chemistry and Mineralogy (CheMin), APXS (Alpha Particle X-Ray Spectrometer), and Sample Analysis at Mars (SAM) instruments. CheMin XRD results show a variety of crystalline phases including feldspar, pyroxene, olivine, oxides, oxyhydroxides, sulfates, sulfides, a tri-octahedral smectite, and XRD amorphous material. The drill fines are distinctly different from corresponding analyses of the global soil (target Rocknest) in that the mudstone samples contained detectable phyllosilicate. Here we focus on John Klein and combine CheMin and APXS data to calculate the chemical composition and concentration of the amorphous component. The chemical composition of the amorphous plus smectite component for John Klein was calculated by subtracting the abundance-weighted chemical composition of the individual XRD crystalline components from the bulk composition of John Kline as measured by APXS. The chemical composition of individual crystalline components was determined either by stoichiometry (e.g., hematite and magnetite) or from their unit cell parameters (e.g., feldspar, olivine, and pyroxene). The chemical composition of the amorphous + smectite component (approx 71 wt.% of bulk sample) and bulk chemical composition are similar. In order to calculate the chemical composition of the amorphous component, a chemical composition for the tri-octahedral smectite must be assumed. We selected two tri-octahedral smectites with very different MgO/(FeO + Fe2O3) ratios (34 and 1.3 for SapCa1 and Griffithite, respectively). Relative to bulk sample, the concentration of amorphous and smectite components are 40 and 29 wt.% for SapCa1 and 33 and 36 wt.% for Griffithite. The amount of smectite was calculated by requiring the MgO concentration to be approx 0 wt.% in the amorphous component. Griffithite is the preferred smectite because the position of its 021 diffraction peak is similar to that reported for John Klein. In both cases, the amorphous component has low SiO2 and MgO and high FeO + Fe2O3, P2O5, and SO3 concentrations relative to bulk sample. The chemical composition of the bulk drill fines and XRD crystalline, smectite, and amorphous components implies alteration of an initially basaltic material under near neutral conditions (not acid sulfate), with the sulfate incorporated later as veins of CaSO4 injected into the mudstone.

Morris, Richard V.↗

NASA NTRS2015

Transmission X-ray Diffraction (XRD) Patterns Relevant to the MSL Chemin Amorphous Component: Sulfates And Silicates

The Mars Science Laboratory (MSL) CheMin instrument on the Curiosity rover is a transmission X-ray diffractometer (Co-Kalpha radiation source and a approx.5deg to approx.52deg 2theta range) where the analyzed powder samples are constrained to have discrete particle diameters <150 microns by a sieve. To date, diffraction patterns have been obtained for one basaltic soil (Rocknest (RN)) and four drill fines of coherent rock (John Klein (JK), Cumberland (CB), Windjana (WJ), and Confidence Hills (CH)). The CheMin instrument has detected and quantified the abundance of both primary igneous (e.g., feldspar, olivine, and pyroxene) and secondary (e.g., Ca-sulfates, hematite, akaganeite, and Fe-saponite) minerals. The diffraction patterns of all CheMin samples are also characterized by a broad diffraction band centered near 30deg 2theta and by increasing diffraction intensity (scattering continuum) from approx.15deg to approx.5deg, the 2theta minimum. Both the broad band and the scattering continuum are attributed to the presence of an XRD amorphous component. Estimates of amorphous component abundance, based on the XRD data itself and on mass-balance calculations using APXS data crystalline component chemistry derived from XRD data, martian meteorites, and/or stoichiometry [e.g., 6-9], range from approx.20 wt.% to approx.50 wt.% of bulk sample. The APXSbased calculations show that the amorphous component is rich in volatile elements (esp. SO3) and is not simply primary basaltic glass, which was used as a surrogate to model the broad band in the RN CheMin pattern. For RN, the entire volatile inventory (except minor anhydrite) is assigned to the amorphous component because no volatile-bearing crystalline phases were reported within detection limits [2]. For JK and CB, Fesaponite, basanite, and akaganeite are volatile-bearing crystalline components. Here we report transmission XRD patterns for sulfate and silicate phases relevant to interpretation of MSL-CheMin XRD amorphous components.

Morris, R. V.↗

NASA NTRS2015

Recognizing Sulfate and Phosphate Complexes Adsorbed onto Nanophase Weathering Products on Mars

Nanophase weathering products (i.e., secondary phases that lack long-range atomic order) have been recognized on the martian surface via orbital observations and in-situ measurements from landed missions. Allophane, a poorly crystalline, hydrated aluminosilicate, has been identified at the regional scale in models of thermal-infrared (TIR) data from the Thermal Emission Spectrometer (TES) and at the local scale from visible/near-IR (VNIR) data from the Compact Reconnaissance Impact Spectrometer for Mars (CRISM) instrument and phase calculations of Alpha Particle X-ray Spectrometer (APXS) data of rocks encountered by the Mars Exploration Rovers (MER) Spirit and Opportunity. Nanophase iron oxides (npOx) have been recognized in rocks and soils measured by the Mössbauer Spectrometer on Spirit and Opportunity. Furthermore, analyses of X-ray diffraction data measured by the CheMin instrument onboard the Mars Science Laboratory rover Curiosity indicate rock and soil samples are comprised of approx. 20-50 wt.% X-ray amorphous materials. Chemical measurements by landed missions indicate the presence of sulfur and phosphorus in martian rocks in soils, and APXS data from Gusev crater demonstrate abundances of up to approx. 5 wt.% P2O5 and approx. 30 wt.% SO3. However, the speciation of phosphorus and sulfur is not always evident. On Earth, phosphate and sulfate anions can be chemisorbed onto the surfaces of nanophase weathering products. This process may also occur on Mars, and calculations of the composition of the amorphous component at Gale crater using CheMin mineral models and APXS data show that amorphous material is enriched in volatiles, including S. Here, we examine the ability to detect chemisorbed sulfate and phosphate complexes by analyzing sulfate- and phosphate-adsorbed nanophase weathering products using instruments similar to those on landed and orbital missions.

Rampe, E. B.↗

NASA NTRS2015

Multispectral Evidence of Alteration from Murray Ridge to Marathon Valley Observed by the Opportunity Pancam on the Rim of Endeavour Crater, Mars

The Mars Exploration Rover Opportunity has been traversing the rim of the Noachian‐aged, 22 km diameter Endeavour crater. Circa sol 3390 of its mission, Opportunity reached the northern tip of the rim segment known as Solander Point and has since been traversing the rim to the south to its current location at the break in the rim known as Marathon Valley. The rocks making up the rim are dominated by impact breccias consisting of clasts and a finer‐grained matrix. Several segments of the rim are transected by fractures as observed from orbital HiRISE imagery. Pancam multispectral observations of outcrop in these fracture regions, including part of the rim crest dubbed Murray Ridge, the Hueytown fracture, and Marathon Valley have been made. Over the range of 430 to 1010 nm there are changes in the multispectral reflectance signature of the breccia matrix with an increase in 535 nm and 904 nm band depth. This is attributed to oxidation and an increase in ferric oxides in these areas. In situ observations by the rover's APXS also indicate chemical differences associated with the matrix along these fractures, including increasing Fe/Mn southward from Solander Point to a region having an Al‐OH signature in CRISM spectra, and generally higher SO3 in the Hueytown fracture region and the area around Spirit of St. Louis. Overturned rocks observed on Murray Ridge were determined by the APXS to have elevated Mn and Pancam spectra of the high Mn spots have a characteristic red, featureless slope. This spectrum was also observed in association with some coatings on blocks of the sulfate‐rich Grasberg formation. Spectra resembling red hematite are observed in some zones in association with the craterform feature Spirit of St. Louis outside the mouth (to the west) of Marathon Valley. Marathon Valley itself has been observed from orbital hyperspectral observations by the CRISM sensor to host occurrences of Fe/Mg smectite minerals‐ indicating extensive aqueous alteration in this region. Pancam observations in Marathon Valley will play an important role in surveying outcrop and making VNIR spectral comparisons with clay bearing outcrop examined earlier in the mission at the Matijevic Hill region.

Farrand, W. H.↗

NASA NTRS2016

High-Temperature, Perhaps Silicic, Volcanism on Mars Evidenced by Tridymite Detection in High-SiO2 Sedimentary Rock at Gale Crater, Mars

The Mars Science Laboratory (MSL) rover, Curiosity, has been exploring sedimentary rocks within Gale crater since landing in August, 2012. On the lower slopes of Aeolis Mons (a.k.a. Mount Sharp), drill powder was collected from a high-silica (74 wt% SiO2) outcrop named Buckskin (BK). It was a surprise to find that the Buckskin sample contained significant amounts of the relatively rare silica polymorph tridymite. We describe the setting of the Buckskin sample, the detection of tridymite by the MSL Chemistry and Mineralogy (CheMin) X-ray diffraction instrument, and detection implications. Geologic setting: The Buckskin outcrop is part of the Murray formation exposed in the Marias Pass area. The formation was previously studied by CheMin in the Pahrump Hills member [1] where three samples of drill fines were analyzed (Confidence Hills (CH), Mojave2 (MJ) and Telegraph Peak (TP) [2]). Assuming approximately horizontal bedding, the Buckskin outcrop is approx.15 m stratigraphically above the bottom of the Pahrump Hills member. Mudstone, generally characterized by fine lamination, is the dominant depositional facies [1]. Buckskin Mineralogical and Chemical Composition: The CheMin instrument and XRD pattern analysis procedures have been previously discussed [3-6]. The diffraction pattern used for quantitative XRD analysis (Fig. 1) is the sum of the first 4 of 45 diffraction images. The remaining images are all characterized by both on-ring and off-ring diffraction spots that we attributed to poor grain motion and particle clumping. Coincident with particle clumping was a significant decrease in the intensity of the tridymite diffraction peaks (Fig. 2a). The derived mineralogical composition of the crystalline component (derived from the first 4 diffraction images) is given in Table 1. The tridymite is well-crystalline and its pattern is refined as monoclinic tridymite (Fig 1). Mineral chemical compositions were derived from XRD unit cell parameters or obtained from stoichiometry. The XRD-calculated amorphous component was 50 +/- 15 wt%. We constrained the value to 60 wt% because it is the minimum value necessary to give a positive Al2O3 concentration for the amorphous component using APXS data for the post-sieve dump pile (Table 2). The amorphous component has high SiO2 (approx.77 wt%) and high anion (SO3+P2O5+Cl ~10 wt%) concentrations. Calculation shows that a cation-anion balance is achieved if the cations in the amorphous component except SiO2 and TiO2, which do not readily form salts, are assumed to be present as amorphous mixed-cation sulfates, phosphates, and chlorides (or perchlorates/ chlorates).

Morris, R. V.↗

NASA NTRS2017

Acid-Sulfate Alteration at Gusev Crater and Across Mars: High-SiO2 Residues and Ferric Sulfate Precipitates

The Mars Exploration Rover Spirit ended its mission in Gusev crater on sol 2210 after it had become stuck in a deposit of fined-grained and sulfate rich soil with dust covered solar panels unfavorably pointed toward the sun. Final analysis of remaining data from Spirit's Moessbauer spectrometer (Fe redox and mineralogy) for sols 1529 through 2071 is now complete. We focus here on chemical (APXS) and MB data for targets having high-SiO2 or high-SO3 and process link the targets through mixing and geochemical modelling to an acid-sulfate system centered at Home Plate, which is considered to be a hydrovolcanic complex.

Morris, R. V.↗

NASA NTRS2018

Reworking and Diagenesis of Martian Soil: Pathway to Murray Formation Sediments?

In Gale crater, the Curiosity Mars rover has climbed over 300 meters of the Murray formation from the base of the Pahrump Hills to the crest of Vera Rubin Ridge. We discuss the possibility that fine-grained mudstone of the Murray formation is a diagenetic product of sediments with a chemical and mineralogical composition similar to present-day martian soil. Typical (low Ca-sulfate) Murray samples have Na2O, Al2O3, SiO2, SO3, TiO2 and FeOT concentrations within 10% (relative) of average martian soil. These oxides constitute ~85% of each sample. The Al/Si and Ti/Si ratios of Murray samples are comparable to average martian soil but distinct from other martian geologic units. Percentage difference in P2O5, Cl, K2O, Cr2O3, MnO, Ni, Zn, Br, and Ge between soil and Murray samples generally exceed 10%, but these elements and oxides amount to less than 4% of the samples. These constituents are highly variable in Murray mudstone and may reflect mobility in fluid interactions. Large discrepancies in MgO and CaO with ~50% lower concentrations in the Murray samples (~2% absolute differences) are indicative of open-system alteration if the Murray mudstone originated from soil-like material. Mineralogically, martian soil is dominated by plagioclase feldspar, pyroxenes, and olivine with minor hematite, magnetite, and Ca-sulfate. In comparison, Murray samples generally have less feldspar and pyroxene, little to no olivine, more iron oxides and Ca-sulfates, and Fe-containing phyllosilicates. If Murray mudstone originated from a Mars soil composition, aqueous alteration could have converted olivine and pyroxenes to iron oxides and phyllosilicates. Intermixed or zoned plagioclase feldspars could have lost a larger portion of calcic constituents, consistent with susceptibility to weathering, resulting in a change from ~An55 (soil) to ~An40 (Murray). This alteration could be consistent with the major element chemistry, including the small decrease in MgO and CaO. A subsequent influx of minor/trace elements and Ca-sulfate, e.g. from groundwater, would be required. In this diagenetic scenario, the bulk of the alteration would have been nearly isochemical, suggesting limited mineral segregation and aqueous alteration during transport from the drainage basin or a significant direct aeolian contribution to the Murray sediments.

Yen, Albert S.↗

NASA NTRSDate not supplied

The Chemistry and Mineralogy of Mars Soils: A Tour of Landed Mission Results from the Last 45 years

Eight landed missions demonstrated that martian soils (defined as loose, unconsolidated surface material) consist of basaltic mineralogy, iron (hydr)oxides, amorphous material, sulfate, chloride, (per)chlorate, nitrate, carbonate, and possible organic C. The Viking Lander 1 and 2 (1976), Mars Pathfinder (1997), and Mars Exploration Rover (MER-A,B) (2004) missions determined that martian soil was similar at all landing sites by having mafic chemistry, high S (~ 7 wt.% SO3) and Cl (0.7 wt.%), and spectral detections of poorly crystalline and crystalline Fe-(hydr)oxide phases. The MER Mössbauer spectrometers detected Fe-bearing olivine and pyroxene along with magnetite, nano-phase Fe-oxides (npOx), hematite, and ferric sulfate. The 2008 Phoenix Lander instrumentation measured a soil pH of 7.7 and detected ~0.6 wt.% perchlorate, 3-5 wt.% Ca-rich carbonate and carbon (500 gC/g) consistent with oxidized organics and Fe-rich carbonate. The 2012 Mars Science Laboratory (MSL) rover (Gale Crater) through X-ray diffraction detected plagioclase feldspar, pyroxene, magnetite, hematite, anhydrite, and quartz, with the balance being composed of Si/Fe-containing amorphous (30 to 40 wt.%) material. MSL evolved gas analysis detected (per)chlorate (0.4 wt.% ClO4), nitrate (0.23 wt.%), along with minor Fe/Mg sulfate and oxidized organic C (~2000 gC/g). Limited pedogenesis may have occurred at the 2018 InSight landing site and in one Gusev Crater soil (MER-B) which have 3 to 10 cm-thick duricrust horizons consistent with atmospheric water vapor interactions with soil salts. Martian soil primary mineralogy was derived mostly from local rock (volcanic, sedimentary) that is largely basaltic planet wide. Secondary minerals [e.g., sulfate, chloride, perchlorate, nitrate, carbonate, Fe-(hydr)oxides] in martian soils formed from oxidative aqueous alteration processes and were likely derived from a combination of local sedimentary rock sources and the global bright dust. The Mars 2020 mission will collect soil for Earth return to enable a thorough assessment of the nature and origin of martian soil.

Mars↗

NASA NTRS2023

Stratigraphic Change from Ca-Sulfate to Mg-Sulfate in the Sedimentary Bedrock of Gale Crater, Mars: Recent Results from Curiosity’s APXS

Curiosity’s APXS instrument has been quantifying sulfates over >30 km of traverse in Gale crater. The rover recently arrived at sedimentary strata where orbital data predicted hydrated Mg-sulfates that may record a change to a drier paleoenvironment. The sequence of strata is in the Marker Band Valley (MBV), the ~10-m-thick, metal-rich Marker Band (MB), and strata above the MB. Here, we report recent sulfate observations by the APXS and provide constraints on the occurrence of Mg-sulfate and the implications for paleoenvironment interpretations. In sedimentary strata below the MBV, Mg-sulfate enrichment (~5-10 wt%) is generally limited to larger diagenetic nodules (~1-3 cm). Ca is positively correlated with S at proportions consistent with Ca-sulfate addition to the bedrock matrix. S variation is thus controlled primarily by Ca-sulfate, which increases ~30% in transitional units below the MBV. The MBV contains the first evidence of Mg-sulfate enrichment in the bedrock matrix, confirmed by the detection of crystalline Mg-sulfate by CheMin. The MBV bedrock has the same overall bulk composition as the underlying Mt. Sharp gp. strata, but with an additional ~5-15 wt% Mg-sulfate. The MB has contrasting sulfate content: (1) targets with very high concentrations of MnO (1.5 wt%), FeO (47 wt%), and Zn (2.2 wt%) are depleted in S and (2) targets with lower metal content have evidence of Mg-sulfate addition. Strata above the MB have a bulk composition that is distinct from other rocks in Gale. For example, the bedrock has molar Fe/Mn (50-60) and Cr/Ti (0.4-0.7) similar to basaltic soil, but ~3X higher Zn and high Ge (50 ppm). Median SO3 above the MB (15 wt%) is higher than the MBV (14 wt%) as well as strata below the MBV (~8 wt%). S does not correlate with Ca or Mg above the MBV. MgO (~9 wt%) is higher than below the MBV (~5 wt%) and the SO3/MgO (1.7) is in the same range as the Mg-sulfate-bearing MBV, suggesting Mg-sulfate enrichment. APXS data indicate that the MBV and above the MB preserve a relatively sharp vertical transition (~5-10 m) from Ca-sulfate to Mg-sulfate in the rock matrix. The sharp contacts with the sulfate-depleted MB and the notable change in bulk composition above the MB may indicate a complex depositional and/or diagenetic history under conditions where enrichments in the highly soluble Mg-sulfates were ultimately preserved.

Jeffrey Allan Berger↗