SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Seismic wave generation, propagation, dispersion and attenuation in gravitating sphere having homogeneous elastic mantle and liquid core, giving theoretical seismograms
Meteoroid impacts as sources of seismic energy on moon, using projectile impact coupling to seismic waves in vacuum chamber experiment
The Apollo 14 lunar landing provided a greater amount of information on the mechanical properties of the lunar soil than previous missions. Measurements on core-tube samples and the results of transporter track analyses indicate that the average density of the soil in the Fra Mauro region is in the range from 1.45 to 1.60 g/cu cm. The soil strength appears to be higher in the vicinity of the site of the Apollo 14 lunar surface experiments package, and trench data suggest that strength increases with depth. Lower-bound estimates of soil cohesion give values of 0.03 to 0.10 kN/sq m, which are lower than values of 0.35 to 0.70 kN/sq m estimated for soils encountered in previous missions. The in situ modulus of elasticity, deduced from the measured seismic-wave velocity, is compatible with that to be expected for a terrestrial silty fine sand in the lunar gravitational field.
It is shown that a sudden change in the seismic wave velocity at 25 km can be interpreted in terms of a single type of material, namely the fine rock powder that is so abundant on the lunar surface. An investigation conducted by Toksoz et al. (1972) is considered. Toksoz et al. rule out a deep powder layer and derive a velocity profile for powders from laboratory data. Differences regarding powder densification between laboratory tests and actual lunar conditions due to much longer compression times are pointed out.
HNS/Teflon (90/10) is a new pressed explosive developed for use in the Apollo program. The major advantages of HNS/Teflon are (1) excellent thermal stability at elevated temperatures, (2) superior resistance to sublimation at high temperatures and low pressures and (3) ease of molding powder preparation, pressing and machining. The impact sensitivity of HNS/Teflon is between that of Comp B and Comp A-3 while its explosive performance is about the same as TNT. Under the severe environmental conditions of the moon's surface, this explosive successfully performed its intended function of generating seismic waves in the Apollo ALSEP and LSPE experiments. (Modified author abstract)
Questions of lunar bulk chemistry are being considered, giving attention to the depletion of the moon in iron and compounds more volatile than iron. Currently four seismic stations are operating on the moon to provide data for the study of the lunar interior. The travel times of seismic waves generated by artificial impacts have been used to determine the structure of the outer 150 km of the moon. New evidence fails to resolve the controversy whether the lunar interior is hot or cold. A schematic cross section of the moon is presented and problems concerning the origin of the moon are considered.
Data obtained with the Apollo 12 and 14 long-period seismometers in the period between December 1969 and January 1973 are used to determine the direction of approach and mass-distribution statistics of meteoroids in near-earth space. The total number of detected meteoroid impacts in this period is analyzed as a function of lunar phase with allowance for seismometer sensitivity and characteristics of lunar seismic-wave propagation. A logarithmic relation is derived which describes the mass-distribution statistics. It is concluded that most orbits for meteoroids with a mass in excess of 5 kg lie near the plane of the ecliptic with aphelia between 2 and 5 AU.
A flexural analog of the torsion pendulum for measuring the Young's modulus and the internal friction Q factor of brittle materials has been developed for Q greater than 10 to the 3rd measurements at a zero static stress and at 10 to the -7th strains of brittle materials in the Hz frequency range. The present design was motivated by the desire to measure Q in fragile lunar return samples at zero static stress to shed light on the anomalously low attenuation of seismic waves on the moon. The use of the apparatus is demonstrated with data on fused silica and on a terrestrial analog of lunar basalt.
In order to better interpret recently reported values for the variation of seismic Q as a function of depth below the lunar surface, we have developed apparatus and made laboratory measurements of Q as a function of hydrostatic pressure, temperature and frequency. Our measurements of the Q associated with shear deformations have demonstrated that the large difference in Q between well outgassed and volatile rich rocks persists to pressures corresponding to a depth of at least 50 km. Here we report new measurements of Q as a function of temperature, on the development of techniques to measure the Q associated with extensional deformations under hydrostatic pressure, on the derivation of theoretical relations between our laboratory Q values and the attenuation coefficient of seismic waves, and on the development of a model for mechanism of adsorption.
Experimental results relevant to the seismic wave attenuation observed for the lunar crust are presented along with some results bearing on the mechanism by which the presence of volatiles increases the attenuation.
The seismic wave velocity structure in the crust and upper mantle region beneath the Tibetan plateau was studied in detail. Also, a preliminary study of the uppermost mantle P wave velocity beneath Iran and Turkey was carried out, and the results are compared with those for the Tibetan plateau. These two studies compose the bulk of the efforts on the observational aspects of continental collision zones in addition to satellite derived data. On the theoretical aspects the thermal evolution of converging plate boundaries was explored using a finite difference scheme.
The seismic crustal structure of the moon is known in the region of Oceanus Procellarum from the analysis of artificial impact data. To extend this knowledge we have used data from natural lunar seismic events to search for secondary seismic wave arrivals in the form of peg-leg multiples caused by reflections at crustal interfaces and converted arrivals caused by refractions at crustal interfaces. A polarization filter has been applied to the data to enhance the rectilinear particle motion expected for the onset of these body wave arrivals in the scattered coda of lunar seismograms. The results of this work tentatively indicate that the highland site at station 16 has a 75 km thick crust with an intermediate 20 km interface, compared to the 60 km crust and 20 km interface in Oceanus Procellarum, a mare region. Since the 20 km upper crust appears to exist at both highland and mare sites, it probably does not represent a mare basalt layer but rather a more general feature of the crust. Crustal thickness may partially control elevation by isostasy.
There is a growing body of evidence that much of the upper mantle may be anisotropic to the propagation of seismic waves. The present investigation shows that a small amount of anisotropy completely changes the nature of the surface wave and normal mode problem. In particular, the apparent lack of sensitivity of many of the spheroidal modes to the compressional velocity structure is due to the degeneracy in the isotropic case. The normal mode data set appears to be adequate to resolve the five elastic constants of a transversely isotropic upper mantle. Dziewonski and Anderson (1981) have shown that these data can be fitted with anisotropy restricted to the upper 200 km of the mantle.
For turbomachinery with low natural frequencies, considerations have been recently required for rotor vibrations caused by external forces except unbalance one, such as foundation motion, seismic wave, rub and so forth. Such a forced vibration is investigated analytically and experimentally in the present paper. Vibrations in a rotor-bearing system under a harmonic excitation are analyzed by the modal technique in the case of a linear system including gyroscopic effect. For a nonlinear system a new and powerful quasi-modal technique is developed and applied to the vibration caused by rub.
Intracontinental zones of extensional tectonic style are commonly of finite width and length. Associated sedimentary troughs are fault-controlled. The evolution of those structures is accompanied by volcanic activity of variable intensity. The characteristic surface structures are usually underlaid by a lower crust of the transitional type while deeper subcustal areas show delayed travel times of seismic waves especially at young tectonic provinces. A correspondence between deep-seated processes and zones of continental extension appears obvious. A sequential order of mechanisms and their importance are discussed in the light of modern data compilations and quantitative kinematic and dynamic approaches. The Cenozoic exensional tectonics related with the Rhine River are discussed.
The component parts of gamma-ray burst models based on neutron starquakes are assessed. The requirements for, and the properties of, neutron starquakes are reviewed. The coupling of seismic waves to Alfven waves is evaluated and the behavior of Alfven waves in the magnetosphere is investigated. An attempt is made to identify the principal sources of free energy in the interiors of old neutron stars.
Laboratory experiments document that liquid iron reacts chemically with silicates at high pressures (above 2.4 x 10 to the 10th Pa) and temperatures. In particular, (Mg,Fe)SiO3 perovskite, the most abundant mineral of earth's lower mantle, is expected to react with liquid iron to produce metallic alloys (FeO and FeSi) and nonmetallic silicates (SiO2 stishovite and MgSiO3 perovskite) at the pressures of the core-mantle boundary, 14 x 10 to the 10th Pa. The experimental observations, in conjunction with seismological data, suggest that the lowermost 200 to 300 km of earth's mantle, the D-double-prime layer, may be an extremely heterogeneous region as a result of chemical reactions between the silicate mantle and the liquid iron alloy of earth's core. The combined thermal-chemical-electrical boundary layer resulting from such reactions offers a plausible explanation for the complex behavior of seismic waves near the core-mantle boundary and could influence earth's magnetic field observed at the surface.
The 1990 Western Pacific Geophysics Meeting was held in Kanazawa, Japan from 15-21 Aug. 1990. This was the first meeting of a new series of meetings for the American Geophysical Union, and it proved to be very successful in terms of the scientific program and attendance, which included over 1,000 participants. The intent of this meeting was an effort on the part of the American Geophysical Union (AGU) and several Japanese geophysical societies to gather individual Earth and space scientists at a major scientific meeting to focus on geophysical problems being studied in the western Pacific rim. The meeting was organized along the lines of a typical AGU annual meeting with some invited talks, many contributed talks, poster sessions, and with emphasis on presentations and informal discussions. The program committee consisted of scientists from both the U.S. and Japan. This meeting provided ample opportunities for U.S. and Japanese scientists to get to know each other and their works on a one-to-one basis. It was also a valuable opportunity for students studying geophysics to get together and interact with each other and with scientists from both the U.S. and Japan. There were 939 abstracts submitted to the conference and a total of 102 sessions designed as a result of the abstracts received. The topics of interest are as follows: space geodetic and observatory measurements for earthquake and tectonic studies; gravity, sea level, and vertical motion; variations in earth rotation and earth dynamics; sedimentary magnetism; global processes and precipitation; subsurface contaminant transport; U.S. Western Pacific Rim initiatives in hydrology; shelf and coastal circulation; tectonics, magmatism, and hydrothermal processes; earthquake prediction and hazard assessment; seismic wave propagation in realistic media; and dynamics and structure of plate boundaries and of the Earth's deep interior.