Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SECONDARY FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Emergent Behavior at the Calcite–Water Interface during Reactive Transport in a Simple Microfluidic Channel

Geochemical reactive transport processes in natural mineral-fluid systems may produce a wide array of emergent phenomena that are difficult to predict from basic principles and to reproduce in model systems. In this study, we present experimental results obtained from a simple microfluidic system with which we explored the consequences of reacting the calcite (104) cleavage surface with an acidic Pb-bearing solution (pH = 3.5, [Pb] total = 5 mM) as a function of flow rate. This system is relevant to passive remediation systems for Pb-rich acid mine drainage. We observed periodic banding in the amounts of Pb sorption at flow velocities ≥ 926 μm s -1 , where the band spacing was spatially correlated with the amount of calcite dissolution and the development of micropyramidal topography on the calcite (104) surface. The equivalent coverage of Pb deposited in these Pb-rich bands was at least several monolayers per unit cell, yet there was no evidence for precipitation of any secondary Pb phase implying incorporation of Pb within the near-surface calcite lattice. We also observed spatial variations in nucleation and growth of euhedral secondary Pb-carbonate minerals hydrocerusite and cerussite at flow rates ≤ 278 μm s -1 ,. These findings demonstrate potential for exploiting the rich phenomenology afforded by the interplay among transport phenomena and chemical kinetics in experimental systems designed to yield deeper insights into geochemical self-organization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Finite-rate entrainment effects on nitrogen oxide (NO x ) emissions in staged combustors

Axially staged combustors offer the potential for achieving low NO x emissions from gas turbines at the elevated temperatures required to achieve at least 65% combined cycle efficiencies. While there is evidence that premixing between the main burner products and secondary stream reduces NO x , it is important to characterize the specific requirements needed to achieve low emissions at gas turbine conditions. This study examines the sensitivity of NO x to finite-rate, large-scale entrainment of the main and secondary streams under the simplifying assumption of infinitely-fast small-scale mixing. Essentially, this allows us to isolate the effects of limited large-scale entrainment rates by using a homogeneous/uniform condition for the entrained and reacting gases. We use a reduced-order reactor network model to examine a generic staged-combustor whose inputs are physical time scales that embody the finite-rate entrainment characteristics. With simulations conducted over a large parameter space at typical operating conditions (25 atm, 650 K air), the results show that, even when small-scale mixing is infinitely fast and the reaction zone is uniform, entrainment significantly affects NO x emissions due to its influence on the equivalence ratio — and thus the temperature and time — at which the entrained mixture ignites. Fuel-air staging is shown to be vital to NO x reduction in most practical cases where entrainment times exceed roughly 1 ms and the secondary stream finishes entraining before the main burner products. A constrained NO x minimization indicates that using the leanest possible main burner and re-routing as much air as possible to the secondary stage is key to low NO x with finite-rate entrainment; for example, less than 10 ppm NO x can be achieved if the secondary stage contains 20% of the total mass flow.

03 NATURAL GAS↗
DOE OSTI2024

In-situ two-dimensional temperature measurements using x-ray fluorescence spectroscopy in laminar flames with high silica particle concentrations

X-ray fluorescence spectroscopy (XRF) was used to measure temperatures and study mixing, for the first time in silica particle synthesis flames. Hexamethyldisiloxane (HMDSO) and trimethylsilanol (TMSO) were the particle precursors. A multi-element diffusion burner was used to produce a flat methane flame, and the precursors, dilute in inert gas, were injected via a central jet. Krypton was the fluorescent medium at 3.2 % concentration by volume. Scans with Kr in the central flow and not in the main flow were made to assess the mixing effects between the central and main gas flows. When HMDSO or TMSO were added, a secondary diffusion flame formed between the jet and the main methane flame. The results revealed a dramatic change in the centerline temperature profile of the jet gases when HMDSO or TMSO were added. The main methane flame stoichiometry also affected the temperature profiles. The results show HMDSO and TMSO reactions are initiated in a lowtemperature and low-oxygen concentration region of the jet where thermal decomposition is not expected to be significant. Reaction of the particle precursors is therefore attributed to radical transport from the main methane flame. In the current work, particle number densities of up to 270 g/m 3 locally are estimated. Thus, the study also demonstrates the capability of the XRF technique for high spatial fidelity measurements in flames with high concentrations of condensed-phase particles, leveraging the attribute that the XRF signal is generally not impacted by condensed-phase interferences. In conclusion, the observations and data obtained in this study inform likely reaction pathways for this important class of siloxane compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Scarcity of fixed carbon transfer in a model microbial phototroph–heterotroph interaction

Although the green alga Chlamydomonas reinhardtii has long served as a reference organism, few studies have interrogated its role as a primary producer in microbial interactions. Here, we quantitatively investigated C. reinhardtii’s capacity to support a heterotrophic microbe using the established coculture system with Mesorhizobium japonicum, a vitamin B 12 -producing α-proteobacterium. Using stable isotope probing and nanoscale secondary ion mass spectrometry (nanoSIMS), we tracked the flow of photosynthetic fixed carbon and consequent bacterial biomass synthesis under continuous and diurnal light with single-cell resolution. We found that more 13 C fixed by the alga was taken up by bacterial cells under continuous light, invalidating the hypothesis that the alga’s fermentative degradation of starch reserves during the night would boost M. japonicum heterotrophy. 15 NH 4 assimilation rates and changes in cell size revealed that M. japonicum cells reduced new biomass synthesis in coculture with the alga but continued to divide—a hallmark of nutrient limitation often referred to as reductive division. Despite this sign of starvation, the bacterium still synthesized vitamin B 12 and supported the growth of a B 12 -dependent C. reinhardtii mutant. Finally, we showed that bacterial proliferation could be supported solely by the algal lysis that occurred in coculture, highlighting the role of necromass in carbon cycling. Collectively, these results reveal the scarcity of fixed carbon in this microbial trophic relationship (particularly under environmentally relevant light regimes), demonstrate B 12 exchange even during bacterial starvation, and underscore the importance of quantitative approaches for assessing metabolic coupling in algal–bacterial interactions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Role of physics in physics-informed machine learning

Physical systems are characterized by inherent symmetries, one of which is encapsulated in the units of their parameters and system states. These symmetries enable a lossless order-reduction, e.g., via dimensional analysis based on the Buckingham theorem. Despite the latter's benefits, machine learning (ML) strategies for the discovery of constitutive laws seldom subject experimental and/or numerical data to dimensional analysis. We demonstrate the potential of dimensional analysis to significantly enhance the interpretability and generalizability of ML-discovered secondary laws. Our numerical experiments with creeping fluid flow past solid ellipsoids show how dimensional analysis enable both deep neural networks and sparse regression reproduce old results, e.g., Stokes law for a sphere, and generate new ones, e.g., an expression for an ellipsoid misaligned with the flow direction. Furthermore, our results suggest the need to incorporate other physics-based symmetries and invariances into ML-based techniques for equation discovery.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Collaborative Research: Vlasov-Maxwell Simulations to Resolve Electron Heating and Dissipation, in Quasi-Perpendicular Shocks

The major goals of the project are to study three fundamental questions related to collisionless, non-relativistic, quasi-perpendicular shocks by combining continuum Vlasov-Maxwell simulations (the Gkeyll framework) and high resolution, in situ heliospheric observations from the MMS spacecraft. The specific questions are: 1. How and where are electrons energized and heated in a quasi-perpendicular shock, including the ultimate source of entropy production? 2. What role do waves, turbulence, and secondary instabilities play in the conversion of directed flow energy to electron energy? 3. How do the parameters of the shock determine the energization of electrons?

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

System with buffer for lateral flow on a porous membrane

Systems are described, based on a primary binding compound and a secondary binding compound used in combination with a support to detect a target in a sample. The systems includes at least one support structure, at least one small primary support portion containing at least one molecule covalently bound to a visual colloidal marker, a plurality of secondary support portions comprising secondary binding compounds that are covalently bound to the support portions and chemically active, at least one pH litmus indicator, at least one pH strip, a buffer for lateral flow on the porous membrane support that allows preservation and activity of binding compounds.

Bearinger, Jane P.↗
DOE OSTI2020

Advanced Simulation and Experiments of Strongly Coupled Geomechanics and Flow for Gas Hydrate Deposits: Validation and Field Application. Final Report

The objectives of the proposed research are (1) to investigate geomechanical responses induced by depressurization experimentally and numerically; (2) to enhance the current numerical simulation technology in order to simulate complex physically coupled processes by depressurization and (3) to perform in-depth numerical analyses of two selected potential production test sites: one based on the deposits observed at the Ulleung basin UBGH2-6 site; and the other based on well-characterized accumulations from the westend Prudhoe Bay. To these ends, the recipient will have the following specific objectives: 1). Information obtained from multi-scale experiments previously conducted at the recipient’s research partner (the Korean Institute of Geoscience and Mineral Resources (KIGAM)) that were designed to represent the most promising known Ulleung Basin gas hydrate deposit as drilled at site UBGH2-6 will be evaluated (Task 2). These findings will be further tested by new experimental studies at Lawrence Berkeley National Laboratory (LBNL) and Texas A&M (TAMU) (Task 3) that are designed capture complex coupled physical processes between flow and geomechanics, such as sand production, capillarity, and formation of secondary hydrates. The findings of Tasks 2 and 3 will be used to further improve numerical codes. 2) Develop (in Tasks 4 through 6) an advanced coupled geomechanics and non-isothermal flow simulator (T+MAM) to account for large deformation and strong capillarity. This new code will be validated using data from the literature, from previous work by the project team, and with the results of the proposed experimental studies. The developed simulator will be applied to both Ulleung Basin and Prudhoe Bay sites, effectively addressing complex geomechanical and petrophysical changes induced by depressurization (e.g., frost-heave, strong capillarity, cryo-suction, induced fracturing, and dynamic permeability).

02 PETROLEUM↗
DOE OSTI2020

Time and space resolved diagnostics for plasma thermal-chemical instability of fuel oxidation in nanosecond plasma discharges

Here, an instability in a nanosecond pulsed dielectric barrier discharge plasma occurring in methane–oxygen–argon mixtures is experimentally observed and measured by 1D time-resolved in situ electric field measurements. This instability, which seems to be created by the positive feedback between plasma kinetics and plasma-assisted low temperature fuel oxidation, is studied using electric field induced second harmonic generation and direct ICCD imaging. The rapid formation of streamers from an originally uniform discharge appears to be caused by the chemical kinetics of plasma-assisted low temperature methane oxidation, which may be resulting in a new type of plasma instability: a thermal-chemical instability. The results also revealed that the occurrence of this possible thermal-chemical instability in a reactive flow drastically changes the plasma properties by forming multiple secondary discharges and possibly leads to micron-sized non-uniform electric distributions. Single shot uncalibrated measurements of the electric field of the micron sized streamers appears to show much greater strengths than the average electric field. Furthermore, one-dimensional data analysis shows the positive feedback loop between the streamers and the low temperature plasma assisted oxidation chemistry in the plasma thermal-chemical instability. The present finding advances the understanding plasma instability growth and provides a new way to control plasma uniformity in plasma-assisted combustion and plasma fuel reforming.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Engineering a modular 44 Ti/ 44 Sc generator: eluate evaluation in preclinical models and estimation of human radiation dosimetry

Background: 44 Sc/ 47 Sc is an attractive theranostic pair for targeted in vivo positron emission tomographic (PET) imaging and beta-particle treatment of cancer. The 44 Ti/ 44 Sc generator allows daily onsite production of this diagnostic isotope, which may provide an attractive alternative for PET facilities that lack in-house irradiation capabilities. Early animal and patient studies have demonstrated the utility of 44 Sc. In our current study, we built and evaluated a novel clinical-scale 44 Ti/ 44 Sc generator, explored the pharmacokinetic profiles of 44 ScCl 3 , [ 44 Sc]-citrate and [ 44 Sc]-NODAGA (1,4,7-triazacyclononane,1-glutaric acid-4,7-acetic acid) in naïve mice, and estimated the radiation burden of 44 ScCl 3 in humans. Methods: 44 Ti/ 44 Sc (101.2 MBq) in 6 M HCl solution was utilized to assemble a modular ZR resin containing generator. After assembly, 44 Sc was eluted with 0.05 M HCl for further PET imaging and biodistribution studies in female Swiss Webster mice. Based on the biodistribution data, absorbed doses of 44 / 47 ScCl 3 in human adults were calculated for 18 organs and tissues using the IDAC-Dose software. Results: 44 Ti in 6 M HCl was loaded onto the organic resin generator with a yield of 99.97%. After loading and initial stabilization, 44 ScCl 3 was eluted with 0.05 M HCl in typical yields of 82.9 ± 5.3% (N = 16), which was normalized to the estimated generator capacity. Estimated generator capacity was computed based on elution time interval and the total amount of 44 Ti loaded on the generator. Run in forward and reverse directions, the 44 Sc/ 44 Ti ratio from a primary column was significantly improved from 1038 ± 440 to 3557 ± 680 (Bq/Bq) when a secondary, replaceable, ZR resin cartridge was employed at the flow outlet. In vivo imaging and ex vivo distribution studies of the reversible modular generator for 44 ScCl 3 , [ 44 Sc]-citrate and [ 44 Sc]-NODAGA show that free 44 Sc remained in the circulation significantly longer than the chelated 44 Sc. The dose estimation of 44 ScCl 3 reveals that the radiation burden is 0.146 mSv/MBq for a 70 kg adult male and 0.179 mSv/MBq for a 57 kg adult female. Liver, spleen and heart wall will receive the highest absorbed dose: 0.524, 0.502, and 0.303 mGy/MBq, respectively, for the adult male. Conclusions: A clinical-scale 44 Ti/ 44 Sc generator system with a modular design was developed to supply 44 ScCl 3 in 0.05 M HCl, which is suitable for further radiolabeling and in vivo use. Our data demonstrated that free 44 ScCl 3 remained in the circulation for extended periods, which resulted in approximately 10 times greater radiation burden than stably chelated 44 Sc. Stable 44 Sc/ 47 Sc-complexation will be more favorable for in vivo use and for clinical utility.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2025

Mechanisms Engineering Test Loop (METL) Operations, Maintenance, and Testing - FY2025

This report documents the operations, maintenance, and improvements that were performed at the Mechanisms Engineering Test Loop (METL) and its supporting infrastructure during FY2024. The METL facility had a very successful seventh year of operations while supporting the testing of multiple test article experiments in the facility. The METL facility continued supporting the Gear Test Assembly (GTA) testing and the Thermal Hydraulic Experimental Test Article (THETA) with the full testing with both the primary and secondary systems. Work to accommodate two additional experiments, a flow sensor test article (F-STAr) gripper test and a fuel handling gripper test article (GrTA) continued as they are expected to undergo testing in METL in FY2025. In addition, a new 18” test article, the Sample Testing Basket (STB) was used a few times to provide screening tests for sodium service materials. A fifth test vessel was installed in the location of Test Vessel 6, and a wet vapor nitrogen sodium processing system was developed and initially tested.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Rheology Investigations with Sludges from Metro Vancouver

Rheological investigation were performed with primary and secondary waste water treatment sludge. Using a rheometer equipped with a high pressure/temperature cell, flow curves were generated over shear rate at 0 to 1000 s-1. Temperature sweeps spanning 25 to 300 C were also performed are are reported here. The original release, PNNL-SA-185826, is being revised. The revision include a revision table, a disclaimer, and the underlying data set is being added.

sludge wastewater treatment plant sludge character↗
DOE OSTI2024

Tutorial: The equations of electron emission and their evaluation

Electron emission and transport through and over potential barriers is an essential process requiring modeling and simulation to meet the design needs and characterization of an exceedingly broad range of technologically important devices and processes. The simulation and description of thermal, field, and photoemission, and the related concerns of space–charge affected electron flow, often make use of specialized formulations developed in the early days of quantum mechanics. Advancements in the utilization of electron sources and particularly the simulation of devices and applications using advanced particle-in-cell and trajectory methods for beam optics codes create a strong need for a pedagogical account of the emission models to ensure correct numerical evaluation of their equations. This Tutorial starts from simple phenomenological accounts and progressively builds to comprehensive models emphasizing straightforward and often rapid calculation. It recommends formulations to supplant the canonical Richardson–Laue–Dushman (thermal), Fowler–Nordheim (field), Fowler–DuBridge (photo), and Baroody (secondary) equations and provides a useful formulation of space–charge affected flow commonly described by the Child–Langmuir relation that takes into account cathode dependence on surface field.

Physics↗
DOE OSTI2021

Investigating the relation between instantaneous driving decisions and safety critical events in naturalistic driving environment

The availability of large-scale naturalistic driving data provides enormous opportunities for studying relationships between instantaneous driving decisions prior to involvement in safety critical events (SCEs). This study investigates the role of driving instability prior to involvement in SCEs. While past research has studied crash types and their contributing factors, the role of pre-crash behavior in such events has not been explored as extensively. The research demonstrates how measures and analysis of driving volatility can be leading indicators of crashes and contribute to enhancing safety. Highly detailed microscopic data from naturalistic driving are used to provide the analytic framework to rigorously analyze the behavioral dimensions and driving instability that can lead to different types of SCEs such as roadway departures, rear end collisions, and sideswipes. Modeling results reveal a positive association between volatility and involvement in SCEs. Specifically, increases in both lateral and longitudinal volatilities represented by Bollinger bands and vehicular jerk lead to higher likelihoods of involvement in SCEs. Further, driver behavior related factors such as aggressive driving and lane changing also increases the likelihood of involvement in SCEs. Driver distraction, as represented by the duration of secondary tasks, also increases the risk of SCEs. Likewise, traffic flow parameters play a critical role in safety risk. The risk of involvement in SCEs decreases under free flow traffic conditions and increases under unstable traffic flow. Further, the model shows prediction accuracy of 88.1 % and 85.7 % for training and validation data. These results have implications for proactive safety and providing in-vehicle warnings and alerts to prevent the occurrence of such SCEs.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Environmental life cycle impacts of small wastewater treatment plants: Design recommendations for impact mitigation

The objective of this study was to quantify potential mitigation of environmental impacts from the operation and construction of wastewater treatment plants (WWTP) from implementing specific design recommendations. The study investigated small WWTPs, many of which are serving slow growing or declining populations. Life Cycle Assessment methodology was used to evaluate and compare the inventory and environmental impacts of nine small WWTP case studies. Detailed inventory data was collected from the facilities’ engineering design plans and utility bills. One recommended practice was to avoid significant overdesign by planning for no lower than a 75% capacity utilization by the facilities’ end-of-life. A theoretical correction to a 75% capacity utilization was estimated to mitigate 0.4% of lifetime electricity usage and 1% of secondary process concrete for every 1% reduction in design average flow rate. Relatedly, a 0.4% mitigation in the Carcinogenic and Global Warming impacts could be achieved for every 1% reduction in design average flow toward a 75% capacity utilization. Other suggested practices were focused on conveyance, namely, to minimize non-process facility area and to use polyvinyl chloride pipe instead of ductile iron pipe where possible. Furthermore, the latter practice was estimated to mitigate between 1.1 and 4.8% of the Carcinogenic impact in the nine case studies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Primary material supply configurations and domestic recycling for cost-effective battery material production in the US

Battery cathode active material costs hinge on regionally concentrated, price-volatile metal supply. Here. we construct a regional facility-level cost model based on over 80 global lithium, cobalt, and nickel mines, refineries, and battery-grade material plants. Our model yields aggregated lithium, nickel, manganese, and cobalt production material costs from 392 region-based supply configurations for five different cathode active materials. Focusing on the United States, all-domestic supply is 9–34% costlier than global average, increasing by cobalt content, while these shortfalls can be overcome by selective low-cost material imports. Furthermore, we analyze costs of two U.S.-based recycling facilities from primary data and techno-economic modelling and compare resulting cathode active material-level costs to primary supply. Although it is still significantly higher on cathode active material cost-level, rising end-of-life flows and lowered black-mass prices will, however, make secondary supply cost-competitive to domestic and foreign primary supply cost floors. Facility-level benchmarks reveal targeted import, scaling, and production cost optimization as levers for a resilient, cost-effective U.S. battery-material supply chain.

Energy↗
DOE OSTI2022

A Process with Decoupled Absorber Kinetics and Solvent Regeneration through Membrane Dewatering and In-Column Heat Transfer (Final Report)

This report summarizes the work conducted on project DE-FE0031604 where University of Kentucky Center for Applied Energy (UK CAER) has validated its intensified CO 2 capture process through substantial enhancements to the kinetics of the absorption process and energy reductions by absorber temperature profile modification, dewatering and heat integration technologies for achieving significant capital and operating cost reductions. To address DOE’s objective of improving post-combustion CO 2 capture technology and reducing associated cost, UK CAER employed an intensified process which combined three key aspects targeted at overcoming inherent limitations or barriers in the conventional CO 2 capture and desorption process. The process designed to be independent of the type of solvent used, included (1) the use of 3-D printed two-channel structured packing material to control the temperature profile and increase the CO 2 absorption rate in the absorber, (2) a zeolite membrane dewatering unit for dewatering of the carbon-rich solvent to decouple solvent concentration needs for CO 2 absorption and desorption, and (3) a rich-split feed with two-phase flow heat transfer prior to the stripper that provided a secondary point of vapor generation to provide energy savings in steam extraction and solvent regeneration. The project was executed over two budget periods. This involved testing of individual process components which included the advanced heat transfer packing and the dewatering membrane on UK CAER’s 30 liter per minute (L/min) CO 2 (3” Column) capture bench unit with simulated flue gas in the first budget period. Subsequent scaled-up testing of these components together with the split-feed configuration were also tested in UK CAER’s 0.1 MWth CO 2 capture unit with coal-derived flue gas in the second-budget period. Long term studies were done during this period to assess process and solvent performance over extended duration. Project partners Lawrence Livermore National Laboratory (LLNL) and Media & Process Technology (MPT) led the development efforts for the advanced packing material and dewatering membrane respectively. Data from the long term testing was used as input for an environmental, health and safety (EH&S) assessment for the process and scaled technology performed by ALL4 LLC. Trimeric Corporation also completed a techno-economic analysis (TEA) for the UK CAER technology which was compared to the DOE reference Case B12B. Tests on the 3” column capture unit showed that the advanced heat transfer packing could be used to lower the bulge temperature in the absorber, and this was also proven in the scaled testing in the 0.1 MWth CO 2 capture unit. The bulge temperature could be lowered by >10 °C, changing the temperature profile in the absorber, and showed potential to enhance absorption with the ability to tailor the profile to provide conditions suitable for a solvent’s properties and kinetics. Conditions for short term evaluation of a 19” zeolite dewatering membrane on the 3” column capture unit yielded desirable fluxes and sustained rejection rates of >80%. However, for the scaled testing of six membrane modules consisting of 21 parts of 31-inch-long membrane tubes in each bundle (surface area 0.3 m 2 ), over a more extended duration, similar rejection rates could not be achieved. With the split-feed of the rich stream to the stripper, improved heat recovery minimized waste heat exiting the top of the stripper. The stripper exhaust temperatures could be reduced by >10 °C; reducing the amount of water vaporization contributed to lowering the regeneration energy by ~ 15%. The energy benefit could be sustained from the long term monitoring of the solvent performance. The solvent properties were not significantly impacted over the long-term operations. The benefits of the UK CAER process demonstrated experimentally were mostly validated from the TEA comparing a commercial scale application of the technology to DOE reference Case B12B. The cost of CO 2 capture for the UK CAER technology was estimated to be ~$34.97/tonne of CO 2 captured; a reduction of 23% compared to Case B12B. The increase in cost of electricity was also shown to be 16% lower than that of Case B12B. The total parasitic demand was also shown to be 11% lower. The key drivers for the benefits are a result of the process intensification approaches employed in the UK CAER technology for enhanced solvent performance, effective heat recovery and improved energy performance. The EH&S assessment did not find any major environmental concerns or barriers to the full scale implementation of the technology.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Modeling hydrodynamic and biomass pyrolysis effects of recycled product gases in a bubbling fluidized bed reactor

Fast pyrolysis of biomass in a fluidized bed reactor is typically conducted in a nitrogen gas environment. Recycling product gas can improve the economics of operating such a system by reducing reliance on pure process streams, but much less is known about how recycling pyrolysis product gas may affect fluidization behavior and pyrolysis kinetics. Therefore, gas effects in a fluidized bed biomass pyrolysis reactor were investigated using engineering correlations, low-order models, and CFD simulations for N 2 , H 2 , CO, CO 2 , and CH 4 carrier gas mixtures. Here, our findings reveal viscosity of a gas mixture can be significantly underestimated depending on the model and correlation. Furthermore, fluidization characteristics such as U mf and gas-solid convective heat transfer can be greatly affected by the gas properties. By utilizing H 2 as the fluidizing gas (instead of N 2 ), while maintaining a constant fluidization ratio (U s /U mf ), the bio-oil yields can be increased ~5%. This is due to the lower density H 2 producing similar hydrodynamics as N 2 at higher gas flow rates. These higher flow rates result in shorter gas residence times, and as a result, less secondary reactions that convert bio-oil to light gases and char. Model results also suggest that bio-oil yield is not significantly affected by the type of carrier gas used, with bio-oil yield varying by ~2% across different gas mixtures while maintaining constant flow rate. In conclusion, this indicates that recycled pyrolytic gas can be used as the carrier gas for biomass pyrolysis.

09 BIOMASS FUELS↗