Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Repository”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

ADVANTG Shielding Analysis for Closure Operations in an Open-Mode Repository

en-mode repository concepts could require worker entry into access drifts after placement of fuel casks in order to perform activities related to backfill, plug emplacement, routine maintenance, or performance confirmation. An ideal emplacement-drift shielding configuration would minimize dose to workers while maximizing airflow through the emplacement drifts. This paper presents a preliminary investigation of the feasibility and effectiveness of radiation shielding concepts that could be employed to facilitate worker operations in an open-mode repository. The repository model for this study includes pressurized-water reactor fuel assemblies (60 GWd/MTU burnup, 40 year post-irradiation cooldown) in packages of 32 assemblies. The closest fuel packages are 5 meters from dosimetry voxels in the access drift. The unshielded dose to workers in the access drift is 73.7 rem/hour. Prior work suggests that open-mode repository concepts similar to this one would require 15 m3/s of ventilation airflow. Shielding concepts considered here include partial concrete plugs, labyrinthine shields, and stainless steel photon attenuator grids. Maximum dose to workers in the access drift was estimated for each shielding concept using MCNP5 with variance reduction parameters generated by ADVANTG. Because airflow through the shielding is important for open-mode repositories, a semi-empirical estimate of the head loss due to each shielding configuration was also calculated. Airflow and shielding performance vary widely among the proposed shielding configurations. Although the partial plug configuration had the best airflow performance, it allowed dose rates 1500 greater than the specified target. Labyrinthine shielding concepts yield doses on the order of 1 mrem/hour with configurations that impose 3 to 11 J/kg head loss. Adding 1 cm lead lining to the airflow channels of labyrinthine designs further reduces the worker dose by 65% to 95%. Photon-attenuator concepts may reduce worker dose to as low as 29 mrem/hour with head loss on the order of 1.9 J/kg.

advantg↗
DOE OSTI2015

MODELING OF THE GROUNDWATER TRANSPORT AROUND A DEEP BOREHOLE NUCLEAR WASTE REPOSITORY

The concept of disposal of high-level nuclear waste in deep boreholes drilled into crystalline bedrock is gaining renewed interest and consideration as a viable mined repository alternative. A large amount of work on conceptual borehole design and preliminary performance assessment has been performed by researchers at MIT, Sandia National Laboratories, SKB (Sweden), and others. Much of this work relied on analytical derivations or, in a few cases, on weakly coupled models of heat, water, and radionuclide transport in the rock. Detailed numerical models are necessary to account for the large heterogeneity of properties (e.g., permeability and salinity vs. depth, diffusion coefficients, etc.) that would be observed at potential borehole disposal sites. A derivation of the FALCON code (Fracturing And Liquid CONvection) was used for the thermal-hydrologic modeling. This code solves the transport equations in porous media in a fully coupled way. The application leverages the flexibility and strengths of the MOOSE framework, developed by Idaho National Laboratory. The current version simulates heat, fluid, and chemical species transport in a fully coupled way allowing the rigorous evaluation of candidate repository site performance. This paper mostly focuses on the modeling of a deep borehole repository under realistic conditions, including modeling of a finite array of boreholes surrounded by undisturbed rock. The decay heat generated by the canisters diffuses into the host rock. Water heating can potentially lead to convection on the scale of thousands of years after the emplacement of the fuel. This convection is tightly coupled to the transport of the dissolved salt, which can suppress convection and reduce the release of the radioactive materials to the aquifer. The purpose of this work has been to evaluate the importance of the borehole array spacing and find the conditions under which convective transport can be ruled out as a radionuclide transport mechanism. Preliminary results show that modeling of the borehole array, including the surrounding rock, predicts convective flow in the system with physical velocities of the order of 10-5 km/yr over 105 years. This results in an escape length on the order of kilometers, which is comparable to the repository depth. However, a correct account of the salinity effects reduces convection velocity and escape length of the radionuclides from the repository.

Modeling↗
DOE OSTI2021

Closing the Gap between FAIR Data Repositories and Hierarchical Data Formats

Many in the scientific community, particularly in publicly funded research, are pushing to adhere to more accessible data standards to maximize the findability, accessibility, interoperability, and reusability (FAIR) of scientific data, especially with the growing prevalence of machine learning augmented research. Online FAIR data repositories, such as the Open Science Framework (OSF), help facilitate the adoption of these standards by providing frameworks for storage, access, search, APIs, and other features that create organized hubs of scientific data. However, the wider acceptance of such repositories is hindered by the lack of support of hierarchical data formats, such as Technical Data Management Streaming (TDMS) and Hierarchical Data Format 5 (HDF5), that many researchers rely on to organize their datasets. Various tools and strategies should be used to allow hierarchical data formats, FAIR data repositories, and scientific organizations to work more seamlessly together. A pilot project at Los Alamos National Laboratory (LANL) addresses the disconnect between them by integrating the OSF FAIR data repository with hierarchical data renderers, extending support for additional file types in their framework. The multifaceted interactive renderer displays a tree of metadata alongside a table and plot of the data channels in the file. This allows users to quickly and efficiently load large and complex data files directly in the OSF webapp. Users who are browsing files can quickly and intuitively see the files in the way they or their colleagues structured the hierarchical form and immediately grasp their contents. This solution helps bridge the gap between hierarchical data storage techniques and FAIR data repositories, making both of them more viable options for scientific institutions like LANL which have been put off by the lack of integration between them.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

Main Features for the Conceptualization of the Post-Closure Evolution Scenario of the Cigeo LIL-HL Waste Repository - 13105

In France, in order to commission the planned geological repository by 2025, a license application for the industrial project of this geological repository called Cigeo (Centre Industriel de Stockage Geologique) must be submitted and reviewed by the competent authorities by 2015. On the basis of its preliminary design set up in 2009 and on the associated requirements for long-term safety, an overall conceptual model has been developed in order to prepare the performance and safety analysis. The Cigeo repository makes use of the passive safety response characteristics of both the engineered and geological barriers that allow: - resisting water ingress, with repository designs favoring the limitation of the water flows; - limiting the release of radionuclides and chemical toxics; - delaying and mitigating the spread of radionuclides and chemical toxics. In order to evaluate the performance of the various elements, a conceptual model of the thermo-hydro-chemico-mechanical (THMC) evolution of the different components of the repository has been designed. It takes stock of a 20 years research effort which allowed data to be obtained from various surface geological campaigns, in-situ experiments in URLs and wastes characterization, and advances in numerical simulation to be utilised. Based on the best available knowledge to date, this conceptual model constitutes a robust basis for the definition and development of the long-term safety scenarios. It also helps identifying the residual uncertainties, and provides guidelines for additional research and system optimizations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2012

Generic Repository Concepts and Thermal Analysis for Advanced Fuel Cycles - 12477

A geologic disposal concept for spent nuclear fuel (SNF) or high-level waste (HLW) consists of three components: waste inventory, geologic setting, and concept of operations. A set of reference geologic disposal concepts has been developed by the U.S. Department of Energy (DOE), Used Fuel Disposition campaign. Reference concepts are identified for crystalline rock, clay/shale, bedded salt, and deep borehole (crystalline basement) geologic settings. These were analyzed for waste inventory cases representing a range of waste types that could be produced by advanced nuclear fuel cycles. Concepts of operation consisting of emplacement mode, repository layout, and engineered barrier descriptions, were selected based on international progress. All of these disposal concepts are enclosed emplacement modes, whereby waste packages are in direct contact with encapsulating engineered or natural materials. Enclosed modes have less capacity to dissipate heat than open modes such as that proposed for a repository at Yucca Mountain. Thermal analysis has identified important relationships between waste package size and capacity, and the duration of surface decay storage needed to meet temperature limits for different disposal concepts. For the crystalline rock and clay/shale repository concepts, a waste package surface temperature limit of 100 deg. C was assumed to prevent changes in clay-based buffer material or clay-rich host rock. Surface decay storage of 50 to 100 years is needed for disposal of high-burnup LWR SNF in 4-PWR packages, or disposal of HLW glass from reprocessing LWR uranium oxide (UOX) fuel. High-level waste (HLW) from reprocessing of metal fuel used in a fast reactor could be disposed after decay storage of 50 years or less. For disposal in salt the rock thermal conductivity is significantly greater, and higher temperatures (200 deg. C) can be tolerated at the waste package surface. Decay storage of 10 years or less is needed for high-burnup LWR SNF in 4-PWR packages, while 12-PWR packages could be emplaced after 40 years or less. HLW from reprocessing LWR UOX fuel or metal fuel from fast reactors, could be disposed of in salt after 10 to 50 years of decay storage depending on the specific composition and other factors. For the deep borehole disposal concept no near-field temperature limits are recognized because no performance credit is taken for waste form or waste package integrity, or containment by the near-field host rock. These results show the key differences in thermal management strategies available to the U.S. repository program, given the range of disposal concepts. A host medium such as salt with greater thermal conductivity and peak temperature tolerance could shorten decay storage by 50 years, or facilitate the use of larger waste packages. The LWR UOX SNF evaluated in this study represents that which could be produced in the coming decades. The existing, lower burnup used fuel that is presently in storage at many LWR locations across the U.S. is significantly cooler, and analyses of this type could be used to show that disposal is possible with less decay storage or larger waste packages. We note that while the temperature limits and waste package capacities used in this study are similar to those used internationally and in past U.S. studies, they might be increased as the result of ongoing research and development activities. This study selected enclosed emplacement modes to conform with disposal concepts developed internationally and previously in the U.S. Open modes (such as that proposed for a repository at Yucca Mountain) afford additional flexibility in waste management and the necessary investment, because the same facility serves both storage and disposal functions. Use of open modes, and combined analysis of storage, transportation, and disposal functions, are appropriate to consider in future studies of this type. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Performance Assessment of a Generic Repository for Defense-Related HLW/SNF in Fractured Crystalline Host Rock - 17059

Recently the U.S. made a policy decision to begin R and D for geologic disposal of defense-related HLW/SNF in a facility separate from commercially generated waste. A deep geologic repository for the disposal of DOE-managed HLW, and some thermally cooler DOE-managed SNF, arising from defense and DOE R and D activities, is part of a stepwise, phased approach for disposal of the Nation's nuclear waste, as recommended by the Blue Ribbon Commission on America's Nuclear Future. The work discussed here focuses on post-closure safety (or performance) assessment for such a Defense Waste Repository (DWR), which is divided into four major activities: (1) development of generic reference cases (i.e., knowledge or technical bases for 'generic' or 'non-site-specific' deep geologic repositories); (2) features, events, and processes (FEPs) analyses and screening to support the technical bases and the performance assessment (PA) model; (3) performance evaluation of alternative EBS design concepts; and (4) post-closure safety analyses of the repository system under consideration. Using the known inventory of defense-related SNF, as well as defense-related HLW stored at the Savannah River and Hanford sites, the Geologic Disposal Safety Assessment (GDSA) Framework modeling and software system has been applied to simulate the potential performance of a DWR in crystalline host rock, resulting in a suite of single-realization (i.e., deterministic) and multi-realization (i.e., probabilistic) 3-D post-closure system analyses, over a performance period of one million years. Two types of emplacement concepts are examined, including single-canister vertical-borehole emplacement for the hotter defense SNF waste (KBS-3V concept) and multi-canister horizontal emplacement for defense HLW (similar to Yucca Mountain co-disposal waste packages). Sensitivity analyses examine the effect of key uncertain parameters on repository performance, including the effects of fracture distribution, waste package degradation rate, buffer and disturbed rock zone (DRZ) properties, and sorption parameters. Initial results indicate that a crystalline host rock with a connected fracture system may require additional safety features to ensure robustness of the isolation safety function, such as a deep unsaturated zone, a sufficiently thick sedimentary overburden, and/or a disposal overpack with a very slow corrosion rate. None of these should pose an undue obstacle for successful disposal. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Performance assessment modeling of a generic SNF/HLW repository in salt with coupled thermal-hydrologic effects - 15423

This paper describes advances in performance assessment modeling of deep geologic repositories facilitated by a massively parallel, high-performance computing (HPC) environment. Our new Generic Disposal System Analysis (GDSA) Framework utilizes the massively parallel PFLOTRAN multi-physics code to simulate repository performance in the presence of coupled thermal-hydrologic-chemical processes, linked to DAKOTA, an HPC uncertainty sampling and propagation code that provides nested parallelism for multi-realization performance assessment and sensitivity analysis. This enhanced performance assessment (PA) modeling capability is demonstrated with deterministic and probabilistic simulations of a generic repository for SNF and HLW in bedded salt host rock, by comparing repository performance between a case with heat-generating waste ('thermal' case) and a case without heat generation ('isothermal' case). The simulation results provide preliminary insights into the effect of multi-physics processes and thermal-hydrologic coupling on the long-term behavior of a reference-case salt repository. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

U.S. Senate Bill S.854-IS - A Maladjusted Politicized Maze for Consent-Based Siting of New HLW-Repositories - 16019

At the end of 2015, the USA's HLW-disposal program had been on hold since 2010 pending the enactment of enabling legislation for one or both of: 1) The Yucca Mountain HLW repository; and/or 2) The law proposed in Senate Bill S.854-IS 'to establish a new organization to manage nuclear waste, provide a consensual process for siting nuclear waste facilities, ensure adequate funding for managing nuclear waste, and for other purposes'. But, S.854-IS does not acknowledge the existence of the Yucca Mountain HLW repository, which, if re-enabled, would affect both when another HLW repository would be needed and its disposal capacity. Furthermore, it neither timely nor meaningfully integrates waste generators, facility-host(s) and other directly affected parties with the new 'implementing' organizations deemed to be more susceptible to political influence and interferences than those plaguing the Yucca Mountain HLW repository program since 1987 that resulted in a multitude of contentions, lawsuits, delays, and increased costs. For these and other reasons very compelling and conclusive to the author, the legal status of the YM HLW repository should be 'definitive' before a law based upon S.854-IS is enacted. Instead, the near-term focus should be on: 1. Defining 'consent-based' quantitatively. 2. Promptly siting and opening at least one large, expandable, 'consolidated' HLW-storage facility allowing the government to begin taking title to commercially-generated HLW; most-expeditiously accomplished by amending existing legislation. 3. Updating S.854-IS based on lessons learned about siting, developing, and licensing nuclear-waste-storage and -disposal facilities in the USA and abroad the past 30+ years. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Assessment of the potential for criticality in the far field of a used nuclear fuel repository

This study aims to assess the likelihood for criticality in the far field of a repository for direct disposal of commercial light water reactor used nuclear fuel. Two models are used in combination: (1) a neutronics model to estimate the minimum critical masses of spherical, water-saturated depositions of fissile material; (2) a transport model to simulate the dissolution of waste packages arranged in an array and the subsequent transport of fissile solutes through fractured bedrock to a single accumulation location. The neutronics model shows that heavy metals from different types of used fuel present the same minimum critical mass behavior in the parameter space of initial enrichment and burnup, dictated largely by the fissile content. However, the magnitude of the minimum critical mass varies significantly within that parameter space, and secondary effects like the presence of absorbing nuclides play a minor role. Here, the transport model employs various subsurface transport scenarios, and for each scenario the mass of each isotope and the overall fissile content of the accumulation is reported from the time of canister failure up to one hundred million years at various distances from the repository edge. Taking the results of the two models in concert, it is shown that even if the accumulation of a critical mass is possible under conservative conditions, these conditions are unlikely to be present in the vicinity of a carefully engineered repository. Based on the results of each model, recommendations for risk mitigation in terms of waste characteristics and repository design are given.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Autonomous Inspection of Geologic Repositories: Current State of the Art and Future Directions

Geological repositories for nuclear waste, including spent nuclear fuel, present a significant challenge for traditional International Atomic Energy Agency (IAEA) safeguards tools due to their inaccessibility and demanding operational conditions. The IAEA has been working closely with Member State organizations currently involved in repository construction and planning, including Euratom, the Finnish and Swedish regulatory authorities, and relevant facility operators. However, the verification challenge remains unsolved, and there persists an out- standing need for tools and approaches that will help the IAEA verify that no nuclear material is diverted from a repository environment. The challenge is also not static. Activities must encompass verification of the design, prior to and during the construction/operation phase, and post backfill. Throughout these various phases, it is imperative that the IAEA maintains a continuity of knowledge (CoK) of all material including information on material inventory and flow. This paper highlights these challenges and outlines how they might be addressed by using remote or autonomous vehicles. Specifically, we discuss the current state of the art in robotic autonomy for known or partially known environment mapping and patrolling, as well as shared autonomy, where humans collaborate with closed loop autonomation to complete tasks. We explore the feasibility of using rovers for these verification tasks, along with the challenges associated with system implementation. Hardware and software suggestions are provided based on the adoption of similar technologies in other comparable areas and ability to close technical gaps. Lastly, human-robotic interactions are considered based on the challenges of the environment of the repository and effective deployment and continued operation of the robot system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Follow-On Status Report on FY2022 Model Development within the Integrated Energy Systems Hybrid Repository

This publication details newly created energy storage and reactor models developed within the HYBRID modeling repository as part of the Department of Energy Office of Nuclear Energy (DOE-NE) Integrated Energy Systems (IES) program, led by Idaho National Laboratory (INL). Model development to-date includes creation of dynamic systems-level models of a pebble bed high temperature gas reactor (HTGR), compressed air energy storage (CAES), and Modelica standard library based two-tank sensible heat storage (SHS) in the IES-based HYBRID repository. Models are developed using the latest publicly available data and incorporate the possibility of control strategy inclusion for use with the existing IES modeling, analysis, and optimization toolset. Simulations showcase the abilities of each technology to flexibly operate in ways consistent with IES operation expectations. When these models are available, they can be utilized within different integrated energy park concepts to understand optimal system operation, control, and dispatching. Moreover, given the generic nature of the models, industrial partner technologies can be quickly added to the repository using the existing models as a basis. Additional dynamic models for thermal energy storage concepts can be developed and added to the HYBRID repository as needed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Examining Autonomous Inspection of Geologic Repositories

Geological repositories for nuclear waste, including spent nuclear fuel, present a significant challenge for traditional International Atomic Energy Agency (IAEA) safeguards tools due to their inaccessibility and demanding operational conditions. The IAEA has been working closely with Member State organizations currently involved in repository construction and planning including Euratom, the Finnish and Swedish regulatory authorities, and relevant facility operators. However, the verification challenge remains unsolved, and there persists an out-standing need for tools and approaches that will help the IAEA verify that no nuclear material is diverted from a repository environment. The challenge is also not static as activities must encompass verification of the design prior to and during the construction/operation phase, and post backfill. Throughout these various phases, it is imperative that the IAEA maintains a continuity of knowledge (CoK) of all material, including information on material inventory and flow. This paper highlights these challenges and outlines how they might be addressed by using remote or autonomous vehicles. Specifically, it discusses the current state of the art in robotic autonomy for known or partially known environment mapping and patrolling, as well as shared autonomy, where humans collaborate with closed loop autonomation to complete tasks. The feasibility of using rovers for these verification tasks is explored, along with the challenges associated with system implementation. Hardware and software suggestions are provided based on the adoption of similar technologies in other comparable areas and ability to close technical gaps. Finally, human-robotic interactions are considered based on the challenges of the environment of the repository and effective deployment and continued operation of the robot system

autonomous monitoring↗
DOE OSTI2019

Portal and Repository for Information on Marine Renewable Energy (PRIMRE)

The Marine Renewable Energy (MRE) industry is in the early stages of development corresponding to low technology readiness levels (TRLs) where the ability of the MRE community (developers, researchers, academics, stakeholders, investors, and regulators) to work together to share knowledge, experience, and lessons learned is critical to the advancement of the entire MRE industry. Through collaboration on solving common problems, the MRE community has the potential to reduce cost and accelerate technology development. Currently, the US Department of Energy (US DOE) Water Power Technologies Office (WPTO) is addressing the challenge of storing, curating, and accessing MRE information by sponsoring development of MRE databases and information portals such as Tethys (https://tethys.pnnl.gov), OpenEI (https://openei.org), the MHK Data Repository (MHKDR, https://mhkdr.openei.org/), and a searchable MRE code catalog and open source code repository (MHKiT, currently under development), to name a few. These sites host scientific papers, news articles, reports, databases, open source codes, and stakeholder engagement information, but they are only a step towards facilitating global discovery and use. In short, there is an abundance of information available online, however it is located on many disparate sites and repositories that make the discovery of those data and information difficult. A DOE national laboratory team from the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Sandia National Laboratories (Sandia) is addressing the issues of data discoverability, shared knowledge, and interconnection of existing MRE databases and information portals. To meet the needs of the MRE community, as identified through multiple community outreach and engagement events, and described in this paper, the multi-lab team has developed an implementation plan for PRIMRE, the Portal and Repository for Information on Marine Renewable Energy. PRIMRE will provide broad access to information on engineering and technologies, resource characterization, device performance, and environmental effects of MRE projects. PRIMRE will facilitate the commercial development of the MRE industry by increasing the accessibility and discoverability of this information, integrating the databases and information portals described in this paper, and developing standards and guidelines. Providing consistent, easy access to information can help reduce duplication of effort and enable the MRE community to learn from past failures and build upon the successes of others to innovate and advance the commercialization of MRE technologies.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Autonomous Monitoring of Nuclear Repositories: Current State of the Art and Future Directions

Geological repositories for nuclear waste, including spent nuclear fuel, present a significant challenge for traditional International Atomic Energy Agency (IAEA) safeguards tools due to their inaccessibility and demanding operational conditions. The IAEA has been working closely with Member State organizations currently involved in repository construction and planning, including Euratom, the Finnish and Swedish regulatory authorities, and relevant facility operators. However, the verification challenge remains unsolved, and there persists an out- standing need for tools and approaches that will help the IAEA verify that no nuclear material is diverted from a repository environment. The challenge is also not static. Activities must encompass verification of the design, prior to and during the construction/operation phase, and post backfill. Throughout these various phases, it is imperative that the IAEA maintains a continuity of knowledge (CoK) of all material including information on material inventory and flow. This paper highlights these challenges and outlines how they might be addressed by using remote or autonomous vehicles. Specifically, we discuss the current state of the art in robotic autonomy for known or partially known environment mapping and patrolling, as well as shared autonomy, where humans collaborate with closed-loop autonomation to complete tasks. We explore the feasibility of using rovers for these verification tasks, along with the challenges associated with system implementation. Hardware and software suggestions are provided based on the adoption of similar technologies in other comparable areas and ability to close technical gaps. Lastly, human-robotic interactions are considered based on the challenges of the environment of the repository and effective deployment and continued operation of the robot system.

geologic repository, safeguards, IAEA, Robotics↗
DOE OSTI2024

Challenges for monitoring and data analytics in a leadership public data repository

The availability and disposition of data has assumed increasing importance in large-scale computational science. Data repositories are evolving to meet new classes of requirements: compliance with government access guidelines, support for reproducibility of experimental results, and long-term availability of data products. The Constellation public data repository at the Oak Ridge Leadership Computing Facility faces these issues while being situated in one of the most productive data centers in the world. While monitoring and operational data analysis are ingrained in the operation of the OLCF’s large-scale high performance computing platforms, data repositories do not have this history of support. Problems faced by Constellation range from data size (over 7 petabytes in current holdings) to analytic complexity (detailed curation is both absolutely necessary for many data sets and absolutely impossible for humans to accomplish in any practical manner) to deployment environment (OLCF storage resources are oriented toward the needs of the compute platforms). In this paper we describe some of the challenges for collecting monitoring and analytic data from a leadership public data repository. We also discuss various strategies we are pursuing in order to address these challenges, from manual data collection to plans for introducing machine learning-based curatorial techniques.

Widener, Patrick [ORNL] (ORCID:0000000258820816)↗
DOE OSTI2017

Coupled THMC models for bentonite in an argillite repository for nuclear waste: Illitization and its effect on swelling stress under high temperature

Subsurface manipulations such as those expected from the disposal of heat-emanating radioactive waste in deep repositories can induce strongly coupled Thermal (T), hydrological (H), mechanical (M) and chemical (C) processes. Adequate coupled THMC models are highly desirable or even indispensable for performance assessment of such repositories, for examples for the analysis of bentonite-based engineered barrier system (EBS) surrounding the emplaced waste. In this study, we present coupled THMC model simulations of a generic nuclear waste repository in an argillite with a bentonite-based buffer. The objective is to evaluate the chemical changes in the EBS bentonite and their effect on mechanical behavior under high temperature, attempting to shed light on whether EBS bentonite can sustain temperatures higher than 100 °C without significant impact on barrier's performance. Two scenarios were simulated for comparison: a case in which the temperature near the waste canister peaks at 200 °C and a case in which the temperature at the same spot culminate with about 100 °C. Simulations for a generic case with Kunigel-VI bentonite as backfill and Opalinus Clay as host rock were conducted for 1000 years and reported in the previous study (Zheng et al., 2015). In this paper, simulations for 100,000 years have been done for two types of bentonite-based buffer materials: Kunigel-VI and FEBEX bentonite. This enables us to evaluate how different types of bentonite behave in terms of the illitization and its impact on swelling stress and whether we can generalize these results to support decision making. The simulations show the occurrence of illitization in the bentonite buffer and the enhancement of illitization under high temperature. However, FEBEX bentonite undergoes less illitization mainly due to the higher ion concentration in pore water and the lower content of K-feldspar in the bentonite mineral composition. Moreover, the reduction of swelling stress by chemical changes is more pronounced for Kunigel-VI bentonite than for FEBEX bentonite. Furthermore, the results of our model simulations suggest that an argillite repository with a bentonite-based EBS that is similar to FEBEX bentonite could sustain temperatures much higher than 100 °C as far as illitization concerns. Model results also reveal that illitization is stabilized after about 2000 years in bentonite near the waste package, but continues in bentonite near the bentonite-argillite interface, which manifests the strong effect of geochemical interaction between EBS bentonite and host rock on long term illitization in bentonite.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Enabling pan-repository reanalysis for big data science of public metabolomics data

Public untargeted metabolomics data is a growing resource for metabolite and phenotype discovery; however, accessing and utilizing these data across repositories pose significant challenges. Therefore, here we develop pan-repository universal identifiers and harmonized cross-repository metadata. This ecosystem facilitates discovery by integrating diverse data sources from public repositories including MetaboLights, Metabolomics Workbench, and GNPS/MassIVE. Our approach simplified data handling and unlocks previously inaccessible reanalysis workflows, fostering unmatched research opportunities.

El Abiead, Yasin↗
DOE OSTI2016

Evaluation on radiation protection aspect and radiological risk at Mukim Belanja repository

Asian Rare Earth (ARE) is a locally incorporated company that operated a mineral processing operation to extract rare earth element. ARE has received much attention from the public since the beginning of their operation until the work of decommissioning and decontamination of the plant. Due to the existence of Naturally Occurring Radioactive Material (NORM) in the residue, the decommissioning and disposal was done by the company in collaboration with the Perak State Government and the Atomic Energy Licensing Board (AELB). The main objective of this study is to review the level of compliance of the existing Radiation Protection Regulations enforced by AELB particularly in the achievement of allowed exposure dose limit. The next objective was to study the impact of the construction of the Mukim Belanja Repository to workers and public. This study was conducted by analyzing documents that were issued and conducting the area monitoring using a Geiger Muller detector (GM) and Sodium Iodide (NaI(Tl)) survey meters. The measurements were made at 5 cm and 1 m from the ground surface at 27 measurement stations. The external doses measured were within the background levels of the surrounding area. The annual effective dose using the highest reading at 5 cm and 1 m from ground surface by GM detector was calculated to be 1.36 mSv/year and 1.21 mSv/year respectively. Whereas the annual effective dose using the highest reading at 5 cm and 1 m from ground surface by using NaI(Tl) detector was calculated to be 3.31 mSv/year and 2.83 mSv/year respectively. The calculated cancer risks from the study showed that the risk is small compared with the risks derived from natural radiation based on global annual radiation dose to humans. This study therefore indicated that the repository is able to constrain the dose exposure from the disposed NORM waste. The study also revealed that the construction of the repository has complied with all the rules and regulations subjected to it. The exposed dose received by the radiation and the public workers during the construction of the repository were below the annual limit i.e. 20 mSv/year and 1mSv/year respectively.

61 RADIATION PROTECTION AND DOSIMETRY↗