Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reflector Antennas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Interpolation solutions for the problem of synthesis of dual-shaped offset reflector antennas

Synthesis of dual-shaped offset reflector antennas to control the exit aperture distribution of amplitude and phase has received considerable attention in recent years. For a given feed illumination and desired aperture field distribution, an exact formulation of the problem of simultaneously synthesizing the shapes of the sub and main reflectors was presented recently by Galindo-Israel et al. (1987) in terms of a set of nonlinear first-order differential equations. In this paper, a numerical approach to solving these equations is discussed which circumvents some of the difficulties encountered by Galindo-Israel et al., particularly for small values of theta.

Jervase, Joseph A.↗
NASA NTRS1992

Analysis of reflector antenna system including frequency selective surfaces

Frequency selective surfaces (FSS's) are often used in spaceborne applications of reflector antennas due to their ability to allow multiple feeds to utilize the same reflector dish. The problems inherent in evaluating the FSS separately from the reflector system are discussed. A method of integrating the FSS effects into the reflector system analysis is presented. An example is given for the proposed Advanced Tracking and Delay Relay Satellite System (ATDRSS) single-access triband reflector antenna.

Zimmerman, M. L.↗
NASA NTRS1985

Microwave holography of large reflector antennas - Simulation algorithms

The performance of large reflector antennas can be improved by identifying the location and amount of their surface distortions and correcting them. To determine the accuracy of the constructed surface profiles, simulation studies are used to incorporate both the effects of systematic and random distortions, particularly the effects of the displaced surface panels. In this paper, different simulation models are investigated, emphasizing a model based on the vector diffraction analysis of a curved reflector with displaced panels. The simulated far-field patterns are then used to reconstruct the location and amount of displacement of the surface panels by employing a fast Fourier transform/iterative procedure. The sensitivity of the microwave holography technique based on the number of far-field sampled points, level of distortions, polarizations, illumination tapers, etc., is also examined.

Rahmat-Samii, Y.↗
NASA NTRS1981

Computer prediction of dual reflector antenna radiation properties

A program for calculating radiation patterns for reflector antennas with either smooth analytic surfaces or with surfaces composed of a number of panels. Techniques based on the geometrical optics (GO) approach were used in tracing rays over the following regions: from a feed antenna to the first reflector surface (subreflector); from this reflector to a larger reflector surface (main reflector); and from the main reflector to a mathematical plane (aperture plane) in front of the main reflector. The equations of GO were also used to calculate the reflected field components for each ray making use of the feed radiation pattern and the parameters defining the surfaces of the two reflectors. These resulting fields form an aperture distribution which is integrated numerically to compute the radiation pattern for a specified set of angles.

Christodoulou, C.↗
NASA NTRS1973

Astigmatism in reflector antennas.

Astigmatic phase error in large parabolic reflector antennas is discussed. A procedure for focusing an antenna and diagnosing the presence and degree of astigmatism is described. Theoretical analysis is conducted to determine the nature of this error in such antennas.

Cogdell, J. R.↗
NASA NTRS1993

Cost and reliability study for a large array of small reflector antennas for JPL/NASA Deep Space Network (DSN)

A study performed to estimate the cost of an array of small aperture reflector antennas to be used instead of or in conjunction with the current large reflector antennas of the JPL/NASA Deep Space Network (DSN) is described. The arrays are used for servicing present and future NASA missions that involve smaller spacecraft with limited power and smaller, lower-gain antennas. The advantages of the array configuration in terms of cost and reliability are discussed. A probabilistic determination of the reliability and availability of the array as a function of the number of array elements and the availability of individual array elements is made. The impact of additional marginal elements on the operational availability of the array is studied. Parametric cost and reliability plots are presented and directions for further investigation are outlined.

Jamnejad, Vahraz↗
NASA NTRS1993

Cost and Reliability Study for a Large Array of Small Reflector Antennas for JPL/NASA Deep Space Network (DSN)

A study is performed to estimate the cost of an array of small aperture reflector antennas to be used instead or in conjunction with the current large reflector antennas of the JPL/NASA Deep Space Network (DSN), for servicing present and future NASA missions which involve smaller spacecraft with limited power and smaller, lower gain antennas. The advantages of the array configuration in terms of cost and reliability are studied. A probabilistic determination of the reliability and availability of the array as a function of the number of array elements and the availability of individual array elements is made. The impact of additional marginal elements on the operational availability of the array is studied. Parametric cost and reliability plots are presented and directions for further investigation are outlined.

Resch, G.↗
NASA NTRS1993

K- and Ka-band mobile-vehicular satellite-tracking reflector antenna system for the NASA ACTS mobile terminal

This paper describes the development of the K- and Ka-band mobile-vehicular satellite-tracking reflector antenna system for NASA's ACTS Mobile Terminal (AMT) project. ACTS is NASA's Advanced Communications Technology Satellites. The AMT project will make the first experimental use of ACTS soon after the satellite is operational, to demonstrate mobile communications via the satellite from a van on the road. The AMT antenna system consists of a mechanically steered small reflector antenna, using a shared aperture for both frequency bands and fitting under a radome of 23 cm diameter and 10 cm height, and a microprocessor controlled antenna controller that tracks the satellite as the vehicle moves about. The RF and mechanical characteristics of the antenna and the antenna tracking control system are discussed. Measurements of the antenna performance are presented.

Densmore, Art↗
NASA NTRS1993

Electrical performance of wire mesh for spacecraft deployable reflector antennas

Mobile satellite communications systems require large, high gain antennas at the spacecraft to minimize the antenna gain and power requirements for mobile user elements. The use of a deployable reflector antenna for these applications provides a lightweight system that can be compactly stowed prior to deployment on orbit. The mesh surface material is a critical component in the deployable reflector antenna design. The mesh is required to provide the desired electrical performance as well as the mechanical properties that are necessary to deploy and maintain the reflector surface on orbit. Of particular interest in multi-channel communications applications is the generation of Passive InterModulation (PIM) products at the reflector surface that can result in interference in the receive band. Wire mesh was specifically identified by some as having a high potential for PIM generation based solely on the existence of nonpermanent metal to metal contacts at the junctions that are inherent in the mesh design. There are a number of other factors, however, that reduce the likelihood of PIM occurring at the mesh reflector surface. Experimental data presented demonstrate that mesh PIM generation is not significant for typical applications. PIM and reflectivity performance of wire mesh composed of gold plated molybdenum wire in a tricot knit are described. This type of mesh was successfully used for the deployable Single Access Antennas of the Tracking and Data Relay Satellite System.

Turner, Greg↗
NASA NTRS1978

A computer program to calculate radiation properties of reflector antennas

A computer program to calculate the radiation properties of the reflector antennas is presented. It can be used for paraboloidal, spherical, or ellipsoidal reflector surfaces and is easily modified to handle any surface that can be expressed analytically. The program is general enough to allow any arbitrary location and pointing angle for the feed antenna. The effect of blockage due to the feed horn is also included in the computations. The computer program is based upon the technique of tracing the rays from the feed antenna to the reflector to an aperture plane. The far field radiation properties are then calculated by performing a double integration over the field points in the aperture plane. To facilitate the computation of double intergral, the field points are first aligned along the equispaced straight lines in the aperture plane. The computation time is relatively insensitive to the absolute size of the aperture and even though no limits on the largest reflector size have been determined, the program was used for reflector diameters of 1000 wavelenghts.

Agrawal, P. K.↗
NASA NTRS1988

A simplified approach to axisymmetric dual-reflector antenna design

A procedure is described for designing dual reflector antennas. The analysis is developed by taking each reflector to be the envelope of its tangent planes. Rather than specifying the phase distribution in the emitted beam, the slopes of the emitted rays were specified. Thus, both the output wave shape and angular distribution of intensity can be specified. Computed examples include variations from both Cassegrain and Gregorian systems, permitting deviation from uniform source distributions and from parallel beam property of conventional systems.

Barger, Raymond L.↗
NASA NTRS1992

Feasibility study of a synthesis procedure for array feeds to improve radiation performance of large distorted reflector antennas

Virginia Tech has several articles which support the NASA Langley effort in the area of large aperture radiometric antenna systems. This semi-annual report reports on the following activities: a feasibility study of a synthesis procedure for array feeds to improve radiation performance of large distorted reflector antennas and the design of array feeds for large reflector antennas.

Stutzman, W. L.↗
NASA NTRS1989

A microstrip array feed for land mobile satellite reflector antennas

A circularly polarized feed array for a spacecraft reflector antenna is described that was constructed by using linearly polarized microstrip elements. The array has seven subarrays which form a single cluster as part of a large overlapping cluster reflector feed array. Each of the seven subarrays consists of four linearly polarized microstrip elements. The array achieved a better than 0.8-dB axial ratio at the array pattern peak and better than 3 dB antenna gain to 20 degrees from the peak, across a 7.5 percent frequency bandwidth. A teardrop-shaped feed probe was used to achieve wideband input impedance matching for the relatively thick microstrip substrate. The low impedance and axial ratio bandwidths were achieved using a relatively thick honeycomb substrate with the impedance-matching feed probes.

Huang, John↗
NASA NTRS1985

Diffraction Analysis of Mesh Deployable Reflector Antennas

A formulation and many representative numerical results for mesh reflector antennas are presented. The reflection coefficient matrix for the prescribed mesh configuration was determined and the local coordinate system of the mesh cells at each point on the curved reflector surface was accentuated. A novel strip aperture model was used to formulate the transmission coefficient matrix for a variety of mesh cell configurations. Numerical data are tailored to the dimensions of a conceptually designed land mobile satellite system (LMSS) which employs a large mesh deployable offset parabolic antenna. Results are shown for an offset parabolic reflector with mesh surfaces similar to the mesh surface of tracking and data relay satellite system (TDRSS).

Rahmat-Samii, Y.↗
NASA NTRS1993

Diffraction Analysis Of Reflector Antennas

POMESH is computer program capable of predicting performance of reflector antennas. Calculates both farfield patterns and gains by use of physical-optics approximation of equivalent surface currents. Intended for relatively small reflectors. Useful in situations in which surfaces described by irregular data that must be interpolated and in which surface derivatives not known. Flexible and robust. Also calculates near fields and useful for subreflector computations. Written in FORTRAN 77.

Hodges, Richard E.↗