Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Passivation of In{sub 0.53}Ga{sub 0.47}As/ZrO{sub 2} interfaces by AlN atomic layer deposition process

Reducing defects at III-V/high-k interfaces is essential for optimizing devices built on these materials. Here, the role of an interfacial AlN process at In{sub 0.53}Ga{sub 0.47}As/ZrO{sub 2} interfaces is investigated by hard x-ray photoelectron spectroscopy (HAXPES) and capacitance/voltage (C-V) measurements. C-V measurements show a significant reduction in the density of interface traps with the interfacial AlN process and a capping TiN layer. To elucidate the specific role of the AlN process, blanket films with various deposition processes are compared. The AlN process alone (without subsequent dielectric deposition) reduces InGaAs oxide levels below the HAXPES detection limit, even though the AlN is ultimately found to be oxidized into AlO{sub x} with only trace N incorporation, yet AlN passivation provides a lower D{sub it} (density of interface traps) when compared with an H{sub 2}O-based Al{sub 2}O{sub 3} deposition. The AlN process does not passivate against re-oxidation of the InGaAs during an O{sub 3} based ZrO{sub 2} deposition process, but it does provide passivation against As-As development during subsequent TiN deposition. The role of chemical defects in the C-V characteristics is also discussed.

36 MATERIALS SCIENCE↗

Non-radiative recombination at dislocations in InAs quantum dots grown on silicon

We study the impact of misfit dislocations on the luminescence from InAs quantum dots (QDs) grown on Si substrates. Electron channeling contrast imaging is used together with cathodoluminescence mapping to locate misfit dislocations and characterize the resulting nonradiative recombination of carriers via near-infrared light emission profiles. With a 5 kV electron beam probe, the dark line defect width due to a typical misfit dislocation in a shallow QD active layer is found to be approximately 1 μ m, with a 40%–50% peak emission intensity loss at room temperature. Importantly, we find that at cryogenic temperatures, the dislocations affect the QD ground state and the first excited state emission significantly less than the second excited state emission. At the same time, the dark line defect width, which partially relates to carrier diffusion in the system, is relatively constant across the temperature range of 10 K–300 K. Our results suggest that carrier dynamics in the QD wetting layer control emission intensity loss at dislocations, and that these defects reduce luminescence only at those temperatures where the probability of carriers thermalizing from the dots into the wetting layer becomes significant. We discuss the implications of these findings toward growing dislocation-tolerant, reliable quantum dot lasers on silicon.

Electron beams↗

Effects of chemical alternation on damage accumulation in concentrated solid-solution alloys

Single-phase concentrated solid-solution alloys (SP-CSAs) have recently gained unprecedented attention due to their promising properties. To understand effects of alloying elements on irradiation-induced defect production, recombination and evolution, an integrated study of ion irradiation, ion beam analysis and atomistic simulations are carried out on a unique set of model crystals with increasing chemical complexity, from pure Ni to Ni 80 Fe 20 , Ni 50 Fe 50 , and Ni 80 Cr 20 binaries, and to a more complex Ni 40 Fe 40 Cr 20 alloy. Both experimental and simulation results suggest that the binary and ternary alloys exhibit higher radiation resistance than elemental Ni. The modeling work predicts that Ni 40 Fe 40 Cr 20 has the best radiation tolerance, with the number of surviving Frenkel pairs being factors of 2.0 and 1.4 lower than pure Ni and the 80:20 binary alloys, respectively. While the reduced defect mobility in SP-CSAs is identified as a general mechanism leading to slower growth of large defect clusters, the effect of specific alloying elements on suppression of damage accumulation is clearly demonstrated. This work suggests that concentrated solid-solution provides an effective way to enhance radiation tolerance by creating elemental alternation at the atomic level. The demonstrated chemical effects on defect dynamics may inspire new design principles of radiation-tolerant structural alloys for advanced energy systems.

36 MATERIALS SCIENCE↗

Accurate and efficient predictions of keyhole dynamics in laser materials processing using machine learning-aided simulations

The keyhole phenomenon has been widely observed in laser materials processing, including laser welding, remelting, cladding, drilling, and additive manufacturing. Keyhole-induced defects, primarily pores, dramatically affect the performance of final products, impeding the broad use of these laser-based technologies. The formation of these pores is typically associated with the dynamic behavior of the keyhole. So far, the accurate characterization and prediction of keyhole features, particularly keyhole depth, as a function of time, has been a challenging task. In situ characterization of keyhole dynamic behavior using the synchrotron X-ray technique is informative but complicated and expensive. Current simulations are generally hindered by their poor accuracy and generalization abilities in predicting keyhole depths due to the lack of accurate laser absorptance data. In this study, we develop a machine learning-aided simulation method that accurately predicts keyhole dynamics, especially in keyhole depth fluctuations, over a wide range of processing parameters. In two case studies involving titanium and aluminum alloys, we achieve keyhole depth prediction with a mean absolute percentage error of 10 %, surpassing those simulated using the ray-tracing method with an error margin of 30 %, while also reducing computational time. This exceptional fidelity and efficiency empower our model to serve as a cost-effective alternative to synchrotron experiments. Our machine learning-aided simulation method is affordable and readily deployable for a large variety of materials, opening new doors to eliminate or reduce defects for a wide range of laser materials processing techniques.

Computational fluid dynamics↗

Thermal conductivity of layered borides: The effect of building defects on the thermal conductivity of TmAlB{sub 4} and the anisotropic thermal conductivity of AlB{sub 2}

Rare earth metal borides have attracted great interest due to their unusual properties, such as superconductivity and f-electron magnetism. A recent discovery attributes the tunability of magnetism in rare earth aluminoborides to the effect of so-called “building defects.” In this paper, we report data for the effect of building defects on the thermal conductivities of α-TmAlB{sub 4} single crystals. Building defects reduce the thermal conductivity of α-TmAlB{sub 4} by ≈30%. At room temperature, the thermal conductivity of AlB{sub 2} is nearly a factor of 5 higher than that of α-TmAlB{sub 4}. AlB{sub 2} single crystals are thermally anisotropic with the c-axis thermal conductivity nearly twice the thermal conductivity of the a-b plane. Temperature dependence of the thermal conductivity near and above room temperature reveals that both electrons and phonons contribute substantially to thermal transport in AlB{sub 2} with electrons being the dominant heat carriers.

36 MATERIALS SCIENCE↗

Gaussian approximation potential for amorphous Si : H

Hydrogenation of amorphous silicon (a–Si : H) is critical for reducing defect densities, passivating midgap states and surfaces, and improving photoconductivity in silicon-based electro-optical devices. Modeling the atomic-scale structure of this material is critical to understanding these processes, which in turn is needed to describe c–Si/a–Si : H heterojunctions that are at the heart of modern solar cells with world-record efficiency. Density functional theory (DFT) studies achieve the required high accuracy but are limited to moderate system sizes of 100 atoms or so by their high computational cost. Simulations of amorphous materials have been hindered by this high cost because large structural models are required to capture the medium-range order that is characteristic of such materials. Empirical potential models are much faster, but their accuracy is not sufficient to correctly describe the frustrated local structure. Data-driven, machine-learned interatomic potentials have broken this impasse and have been highly successful in describing a variety of amorphous materials in their elemental phase. Here, we extend the Gaussian approximation potential (GAP) for silicon by incorporating the interaction with hydrogen, thereby significantly improving the degree of realism with which amorphous silicon can be modeled. We show that our Si : H GAP enables the simulation of hydrogenated silicon with an accuracy very close to DFT but with computational expense and run times reduced by several orders of magnitude for large structures. Here, we demonstrate the capabilities of the Si : H GAP by creating models of hydrogenated liquid and amorphous silicon and showing that their energies, forces, and stresses are in excellent agreement with DFT results, and their structure as captured by bond and angle distributions are in agreement with both DFT and experiments.

36 MATERIALS SCIENCE↗

Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects

The fabrication of devices containing thin film structures necessitate the transfer of these films onto the surfaces of arbitrary support substrates. Accomplishing this transfer in a highly controlled, mechanized, and reproducible manner would eliminate the creation of macroscale defect structures (e.g. tears, cracks, and wrinkles) within the thin film that would otherwise have a negative impact on ultimate device performance. In this work, we describe a general protocol for the highly controlled and mechanized transfer of a polymeric thin film onto an arbitrary porous support substrate for eventual use as a water filtration membrane device. Specifically, we fabricate a block copolymer (BCP) thin film on top of a sacrificial, water-soluble poly(acrylic acid) (PAA) layer and silicon wafer substrate. We then utilize a custom-designed, 3D-printed transfer tool and drain chamber system to deposit, lift-off, and transfer the BCP thin film onto the center of a porous anodized aluminum oxide (AAO) support disc. The transferred BCP thin film is shown to be consistently placed onto the center of the support surface due to the guidance of the meniscus. Additionally, we compare our mechanized transfer-processed thin films to those that have been transferred by other commonly used techniques, such as by hand with the use of tweezers. Optical inspection and image analysis of the transferred thin films from the mechanized process confirm that little-to-no macroscale inhomogeneities or plastic deformations are produced, as compared to the multitude of tears and wrinkles produced from manual transfer by hand. Our findings indicate that the proposed strategy for thin film transfer can reduce defects when compared to other methods across many systems and applications.

36 MATERIALS SCIENCE↗

Stable and Efficient Methylammonium–, Cesium–, and Bromide–Free Perovskite Solar Cells by In–Situ Interlayer Formation

The vast majority of high–performance perovskite solar cells (PSCs) are based on multi–cation mixed–anion compositions incorporating methylammonium (MA) and bromide (Br). Nevertheless, the thermal instability of MA and the tendency of mixed halide compositions to phase segregate limit the long–term stability of PSCs. However, reports of MA–free and/or Br–free compositions are rare in the community since their performance is generally inferior. Here, a strategy is presented to achieve highly efficient and stable PSCs that are altogether cesium (Cs)–free, MA–free and Br–free. An antisolvent quenching process is used to in–situ deposit a polymeric interlayer to promote the growth of phase–pure formamidinium lead tri–iodide perovskite crystals with reduced defect density and to assist in photo–excited charge extraction. Here, the PSCs developed are among the best–performing reported for such compositions. Moreover, the PSCs show superior stability under continuous exposure to both illumination and 85 °C heat.

36 MATERIALS SCIENCE↗

Manipulating the Crystallization Kinetics by Additive Engineering toward High-Efficient Photovoltaic Performance

Additive processing is proven to be an effective method to improve the efficiency and stability of perovskite solar cells; however, its intrinsic role in directing the crystallization pathway and thus morphology formation remains unknown. In situ grazing-incidence wide-angle x-ray scattering (GIWAXS) is applied to study the function of a 1,8-diiodooctane (DIO) additive in manipulating the crystallization behavior of perovskite thin films. It is seen that the DIO additive could induce multi-stage intermediate crystallization phases and increases the activation energy for nucleation and growth, which postpones the perovskite phase transformation time and broadens the transition zone. The elongated crystallization process affords improved perovskite thin film crystallinity and reduces defect density, which enables a longer carrier diffusion length. As a result, improved device efficiency, moisture, and thermal stability can be achieved. The following study provides a new prospective in understanding the additive function in perovskite thin film morphology control from fundamental parameters, indicating the importance of minor processing conditions in global property management toward high device performance.

36 MATERIALS SCIENCE↗

Seed‐Assisted Growth for Scalable and Efficient Perovskite Solar Modules

Perovskite solar modules (PSMs) have shown remarkable photovoltaic potentials, but they still suffer from large power conversion efficiency (PCE) loss on scale‐up and instability due to inferior uniformity and crystallization over large areas. Herein, the scalable production of efficient and stable PSMs using a suite of all‐scalable fabrication methods featuring a two‐step blade/dip‐coating approach to deposit the perovskite absorber layer is demonstrated. Rubidium chloride is introduced to embed (PbI 2 ) 2 RbCl complex seeds in the first‐deposited PbI 2 precursor, which assists in uniform crystallization of the perovskite layer with high crystallinity and reduced defect density over large areas. Following the optimization of RbCl additives, a champion PSM with 17.9% PCE on a 7.6 × 7.6 cm 2 substrate with a 37 cm 2 aperture area is achieved. Moreover, the RbCl‐incorporated PSMs demonstrate excellent reproducibility and stability under continuous 1 sun illumination. This work shows that the two‐step blade/dip coating is a promising method for producing high‐efficiency and stable PSMs on an industrially relevant scale.

Energy & Fuels↗

Thin film epitaxy and structure property correlations for non-polar ZnO films

Heteroepitaxial growth and strain relaxation were investigated in non-polar a-plane (11-20)ZnO films grown on r-plane (10-12)sapphire substrates in the temperature range 200-700 C by pulsed laser deposition. The lattice misfit in the plane of the film for this orientation varied from -1.26% in [0001] to ?18.52% in the [-1100] direction. The alignment of (11-20)ZnO planes parallel to (10-12)sapphire planes was confirmed by X-ray diffraction {theta}-2{theta} scans over the entire temperature range. X-ray {psi}-scans revealed the epitaxial relationship:[0001]ZnO[-1101]sap; [-1100]ZnO[-1-120]sap. Depending on the growth temperature, variations in the structural, optical and electrical properties were observed in the grown films. Room temperature photoluminescence for films grown at 700 C shows a strong band-edge emission. The ratio of the band-edge emission to green band emission is 135:1, indicating reduced defects and excellent optical quality of the films. The resistivity data for the films grown at 700 C shows semiconducting behavior with room temperature resistivity of 2.2 x 10{sup -3} {Omega}-cm.

36 MATERIALS SCIENCE↗

Magnetic field-, strain-, and disorder-induced responses in an energy spectrum of graphene

We study numerically a role of the uniaxial tensile strains and disordered defects in their impact on electronic density of states (DOS) in graphene exposed to an external magnetic field. The DOS curves are calculated using the tight-binding Hamiltonian, where the perpendicular magnetic field and uniaxial tension are included via the relevant modifications of the hopping parameters. Observed non-equidistant Landau levels (LLs) in the energy spectrum of a defectless graphene undergo the displacement towards the non-shiftable zero-energy Landau level (LL), thus they get contraction as the uniaxial tension is applied independently on the stretching direction. The presence of both point and extended defects reduces LLs peaks, broadens, smears, and can even suppress the LLs depending on a degree of disorders, their strength, and largely effective ranges. Splitting of the zero-energy LL is observable in case of a short-range disorder. Alteration of the localized electronic states in graphene is sensitive to the axis of strain: the uniaxial tensile strains along armchair- and zigzag-edge directions can result to competing phenomena associated with enhancement and reduction of the DOS, respectively. Mutual action of the perpendicular magnetic field and uniaxial stress along the zigzag-edge direction in graphene contributes to the band gap observed in its energy spectrum: the gap becomes more pronounced and even wider as compared with that emerges in case of a zigzag strain effect only, i.e. beyond magnetic field effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Efficient BiVO 4 /CoFeO x H y photoanodes using controlled annealing and conformal linear-sweep electrocatalyst photodeposition

Although monoclinic bismuth vanadate (BiVO 4 ) is a promising photoanode for solar water splitting, its practical use is hindered by imperfect photocurrent generation/collection, low photovoltage compared to the bandgap, and corrosion side reactions that limit durability. Here, we introduce a controlled-annealing sol–gel process for BiVO 4 thin-film photoanodes along with an optimized linear-sweep-voltammetry photodeposition of CoFeO x H y cocatalysts. The resulting BiVO 4 films annealed at 550 °C exhibited a photocurrent density of 4.1 mA/cm 2 at 1.23 V RHE under 1 sun AM 1.5G solar simulation and a low onset potential of 0.26 V RHE due to high majority carrier conductivity, a crystalline bulk with reduced defects as evidenced by x-ray photoelectron spectroscopy and photoluminescence lifetime analysis, and thus enhanced photocarrier collection. However, significant degradation in performance was found due to interfacial photocorrosion. To protect the surface and speed the oxygen-evolution reaction CoFeO x H y cocatalyst layers were deposited. By varying the number of consecutive sweeps and adjusting the applied bias range, an ultra-thin (~15 nm) CoFeO x H y cocatalyst layer was uniformly grown deposited over 30 cycles on the BiVO 4 surface. The resulting BiVO 4 /CoFeO x H y yielded 4.03 mA/cm 2 at 1.23 V RHE and onset potential of 0.24 V RHE , with stable operation (~15 % loss in photocurrent at 1.23 V RHE relative to ~60 % loss in the uncatalyzed control sample). These conformal CoFeO x H y catalytic layers function simultaneously to selectively collect photoexcited holes from the BiVO 4 , catalyze the water-oxidation reaction, and protect the BiVO 4 from photodegradation.

42 ENGINEERING↗

Fractionated Stereotactic Radiotherapy in Patients With Optic Nerve Sheath Meningioma

Purpose: To evaluate the effectiveness of fractionated stereotactic radiotherapy (SFRT) in the treatment of optic nerve sheath meningioma (ONSM). Methods and Materials: Between 1993 and 2005, 109 patients (113 eyes) with primary (n = 37) or secondary (n = 76) ONSM were treated according to a prospective protocol with SFRT to a median dose of 54 Gy. All patients underwent radiographic, ophthalmologic, and endocrine analysis before and after SFRT. Radiographic response, visual control, and late side effects were endpoints of the analysis. Results: Median time to last clinical, radiographic, and ophthalmologic follow up was 30.2 months (n = 113), 42.7 months (n = 108), and 53.7 months (n = 91), respectively. Regression of the tumor was observed in 5 eyes and progression in 4 eyes, whereas 104 remained stable. Visual acuity improved in 12, deteriorated in 11, and remained stable in 68 eyes. Mean visual field defects reduced from 33.6% (n = 90) to 17.8% (n = 56) in ipsilateral and from 10% (n = 94) to 6.7% (n = 62) in contralateral eyes. Ocular motility improved in 23, remained stable in 65, and deteriorated in 3 eyes. Radiographic tumor control was 100% at 3 years and 98% at 5 years. Visual acuity was preserved in 94.8% after 3 years and in 90.9% after 5 years. Endocrine function was normal in 90.8% after 3 years and in 81.3% after 5 years. Conclusions: SFRT represents a highly effective treatment for ONSM. Interdisciplinary counseling of the patients is recommended. Because of the high rate of preservation of visual acuity we consider SFRT the standard approach for the treatment of ONSM. Prolonged observation is warranted to more accurately assess late visual impairment. Moderate de-escalation of the radiation dose might improve the preservation of visual acuity and pituitary gland function.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effects of Fe atoms on hardening of a nickel matrix: Nanoindentation experiments and atom-scale numerical modeling

Significant hardening effect due to Fe concentrations in Ni-based alloys with face-centered-cubic structure has been studied by using a combined experimental and atomistic-based computational approach via nanoindentation tests. The obtained experimental load–displacement data for the [0 0 1] crystal orientation reached a qualitative good agreement with molecular dynamics simulations results, leading to strong evidence that the main strengthening factors are associated to sluggish dislocation diffusion, reduced defect sizes and the nucleation of tetrahedral stacking faults. Here, interstitial type prismatic dislocation loops mainly formed by $\frac{1}{6}$$\langle$1 1 2$\rangle$ Shockley dislocations are nucleated during the loading process, where their interaction leads to the formation of pyramidal shaped stacking fault which are mainly created by $\frac{1}{3}$$\langle$1 0 0$\rangle$ Hirth dislocations lines. Observing both types of defects coexisting in the same plastic deformation zone by both approaches. Reported mechanical data, measured experimentally and interpreted numerically, are also in accordance with microstructural SEM and TEM investigations.

36 MATERIALS SCIENCE↗

Additively manufactured refractory high-entropy alloys with superior radiation resistance

Refractory high-entropy alloys (RHEAs) are promising candidates for next-generation nuclear and high-temperature applications. Among many approaches to manufacture RHEAs, additive manufacturing (AM) represents the most recent and advanced metal manufacturing method which allows near-net-shape manufacturing to reduce material waste and post-processing time. However, performance of AM RHEAs under complex irradiation conditions remains largely unexplored. Here, in this study, we demonstrate for the first time the response of directed energy deposition (DED) AM quaternary RHEAs (HfTaVW, CrTaVW) subjected to sequential dual-beam ion irradiation, consisting of helium pre-implantation followed by high-dose heavy ion bombardment. Compositions of DED AM RHEAs were selected using Monte Carlo (MC) simulations based on a cluster expansion (CE) Hamiltonian parameterized by density functional theory (DFT). Post-irradiation microstructural characterization revealed that the AM RHEA maintained remarkable stability, with suppressed helium bubble growth and reduced defect accumulation compared to conventional alloys. Even at high doses (∼100 dpa), the alloy exhibited no void swelling, a low density of dislocation loops, and no evidence of severe degradation. These results highlight the intrinsic ability of AM-derived microstructures and multicomponent chemistry to synergistically mitigate irradiation effects. Our findings establish AM RHEAs as a class of materials with superior resistance to radiation damage under conditions relevant to advanced fusion and fission environments and demonstrate the importance of sequential ion beam studies in evaluating their long-term performance.

36 MATERIALS SCIENCE↗

Optimization of Annealing for WZ-Phase Removal and Densification in Sb-Doped CdSexTe1-x Solar Cells

The impact of high temperature annealing (HTA) treatments on the performance of Sb-doped CdSeTe solar cells containing a CdSe0.25Te0.75/CdTe front stack and a vapor transport (VT) deposited CdTe:Sb absorber was studied. The HTA treatment of the thermally evaporated CdSe0.25Te0.75/CdTe front stack converts the mixed-phase film into a single zinc blende structure through recrystallization of the photo-inactive wurtzite phase. Subsequently, HTA treatment of the full device stack after vapor transport deposition of CdTe:Sb absorber promotes Se-Te intermixing, reduces voids, densifies the full stack and enhances CdTe:Sb grain growth. Comprehensive characterizations revealed that the combined HTA treatments significantly improved film crystallinity, removed the WZ phase in the front stack, enhanced full-stack densification, reduced defect densities, and enhanced carrier dynamics. With HTA treatments, the open-circuit voltage (VOC) of CdSeTe:Sb devices increased from ~ 400 mV to >= 600 mV, and when combined with optimized CdCl2 treatment, VOC reached 849 mV. The net carrier concentrations (NA-ND) of representative devices were NA-ND = 1.5 x 10^15, 1.1 x 10^15, and 3.5 x 10^14 cm-3 for the no-HTA, moderate-HTA, and optimized high-VOC conditions, respectively. Since the highest VOC corresponds to the lowest apparent NA-ND, , which is similar to a Cu-doped-only CdSeTe solar cell (NA-ND ~= 2 x 10^14 cm-3), the data indicate that improved device performance does not result from increased electrically active Sb; instead, it points to structural improvement as the dominant effect of HTA. The findings demonstrate the potential of HTA treatments to improve the structural and electrical properties of CdSeXTe1-X solar cells.

14 SOLAR ENERGY↗

Double-Crucible Vertical Bridgman Technique for Stoichiometry-Controlled Chalcogenide Crystal Growth

Precise stoichiometry control in single-crystal growth is essential for both technological applications and fundamental research. However, conventional growth methods often face challenges such as non-stoichiometry, compositional gradients, and phase impurities, particularly in non-congruent melting systems. Even in congruent melting systems like Bi₂Se₃, deviations from the ideal stoichiometric composition can lead to significant property degradation, such as excessive bulk conductivity, which limits its topological applications. In this study, we introduce the double-crucible vertical Bridgman (DCVB) method, a novel approach that enhances stoichiometry control through the combined use of continuous source material feeding, traveling-solvent growth, and liquid encapsulation, which suppresses volatile element loss under high pressure. Using Bi₂Se₃ as a model system, we demonstrate that crystals grown via DCVB exhibit enhanced stoichiometric control, significantly reducing defect density and achieving much lower carrier concentrations compared to those produced by conventional Bridgman techniques. Moreover, the continuous feeding of source material enables the growth of large crystals. As a result, this approach presents a promising strategy for synthesizing high-quality, large-scale crystals, particularly for metal chalcogenides and pnictides that exhibit challenging non-congruent melting behaviors.

Crystal structure↗