Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reactive separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Control of Molecular Bonding Strength on Metal Catalysts with Organic Monolayers for CO 2 Reduction

The development of separate levers for controlling the bonding strength of different reactive species on catalyst surfaces is challenging but essential for the design of highly active and selective catalysts. For example, during CO 2 reduction, production of CO often requires balancing a trade-off between the adsorption strength of the reactant and product states: weak binding of CO is desirable from a selectivity perspective, but weak binding of CO 2 leads to low activity. Here in this paper, we demonstrate a new method of controlling both CO 2 adsorption and CO desorption over supported metal catalysts by employing a single self-assembly step where organic monolayer films were deposited on the catalyst support. Binding of phosphonic acid monolayers on supported Pt and Pd catalysts weakened CO binding via a through-support effect. The weakened CO adsorption was generally accompanied by decreased adsorption and reactivity of CO 2 . However, by the incorporation of basic amine functions at controlled positions in the modifying film, strong CO 2 adsorption and hydrogenation reactivity could be restored. Thus, both through-surface and through-space interactions could be manipulated by design of the organic modifiers. After surface modification, the catalysts exhibited significantly improved selectivity (up to ~99% at conversions near 50%) and activity toward CO production. Moreover, the rate of deactivation was notably reduced due to prevention of CO poisoning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Deimos: HALEU TRISO Heated Critical Experiment Data

Deimos was the first critical experiment using high-assay low-enriched uranium (HALEU) TRistructural ISOtropic (TRISO) fuel in over 40 years. HALEU TRISO is the desired fuel form for many of the advanced reactor designs in development; however, very little experimental data are available for this fuel type. Deimos was designed to utilize existing HALEU TRISO fuel in a large graphite moderator to obtain nuclear and reactor physics data to fill the gaps surrounding this fuel type and enrichment. In addition to cold critical data, three separate heated experiments were conducted to measure the temperature reactivity coefficient for this type of system. These measured coefficients were then compared to simulated coefficients to a first level order of fidelity. This comparison showed very good agreement for the experiment where only the inner core was heated and good agreement for the other two configurations, which included heating portions of the outer core. Less agreement when the outer core was heated is attributed to potential heating in the beryllium reflector, which has a positive temperature reactivity coefficient and was unaccounted for in the first-order models. Future heated experiments with Deimos will include temperature monitoring of the beryllium reflector to account for beryllium heating in the simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Solar Thermochemical Carbon Dioxide Splitting Using Ceria and Iron Aluminate Foam Devices and Simulation of a Plant System for Demonstration

An international research project has been undertaken to integrate a unique solar thermal processing reactor system with ceria and iron aluminate as active redox materials for CO2 splitting. Experimental investigations for CO2 splitting were conducted using a solar simulator and tube furnace at Niigata University, followed by demonstrations using a high-flux solar furnace (HFSF) at the National Renewable Energy Laboratory (NREL) in Golden, CO. Each experimental setup consisted of foam devices composed of reticulated porous ceramic (RPC). The RPC has a full ceria or iron aluminate body. It fabricated using the replica method and subjected to a two-step redox reaction, which iteratively separated a stream of CO2 into O2 and CO. Reactivity was evaluated using CO production per mass of the reactive material. The tubular furnace yielded a CO production of 6.41 mL/g at a reduction temperature of 1600degrees C, showcasing a higher CO production rate and total amount than those obtained from experiments conducted with solar simulators and solar furnace setups. For iron aluminate RPC, the productivity was measured as 3.57 mL/g using HFSF at a reduction temperature of 1450degrees C. These results are somewhat higher than those of the previous experiment at lower reduction temperatures of 1400degrees C-1500degrees C. Additionally, the production of CO in the case of ceria RPC was compared with the steady flow model simulation, which assumed chemical equilibrium at various levels of oxygen partial pressure during the reduction process. On the basis of these results, this study proposes a solar fuel system with an open receiver that uses a high-temperature heat transfer fluid.

carbon dioxide thermochemical splitting↗
DOE OSTI2020

Impact of Laboratory-Accelerated Aging Methods to Study Alkali–Silica Reaction and Reinforcement Corrosion on the Properties of Concrete

This study focuses on two separate investigations of the main aging mechanisms: alkali–silica reactivity (ASR) and the corrosion of reinforcing steel (rebar) concrete, both of which may result in a premature failure to meet the serviceability or strength requirements of a concrete structure. However, these processes occur very slowly, spanning decades. The impact of direct chemical additives to fresh concrete to accelerate ASR and the corrosion of reinforcing steel on the fresh and hardened properties of the ensuing material are investigated to inform the potential use of chemicals in large-scale studies. The deterioration of reinforced concrete (RC) is determined by means of expansion, cracking, bulk diffusivity and surface resistivity measurements, and compressive, split tensile and flexural strength tests. The results indicate that the addition of sodium hydroxide and calcium chloride can effectively accelerate the crack formation and propagation in concrete due to ASR and the corrosion of rebar, respectively. The ASR-induced cracks maintained a constant crack width from 0.05 mm to 0.1 mm over the measurement period regardless of the intensity of aging acceleration. Adding 4% chloride by weight of cement for accelerating rebar corrosion resulted in an average crack that was 82% larger than in the case of ASR accelerated with the addition of sodium hydroxide. The addition of alkali resulted in an increase in early-age (7-day) strength. At a total alkali loading of 2.98 kg/m3, 3.84 kg/m3 and 5.57 kg/m3, the 28-day compressive strength of concrete decreased by 3%, 10% and 24%, respectively. Similarly, a higher early-age strength and a lower later-age strength was observed for the concrete in the presence of corrosive calcium chloride. The results from this research are expected to inform future studies on the long-term performance of RC structures under accelerated ASR and corrosion.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Per-Phase Control for CHB Converters with Negative-Sequence Current and DC Voltage Balancing Control

This paper presents a per-phase controller for a grid-connected Cascaded H-Bridge (CHB) converter featuring negative sequence current regulation and DC bus voltage balancing capabilities. Unlike conventional three-phase controllers, each phase of the CHB can be separately and controlled to regulate the DC voltage and reactive power flow. per-phase negative sequence current control strategy is incorporated into the proposed controller to ensure compliance with IEEE Standard 2800-2022, which requires the absorption of negative-sequence reactive current during grid voltage disturbances. Furthermore, a feed-forward control-based DC bus voltage balancing method is employed, which eliminates the need for the integrator commonly used in traditional approaches. The performance of the proposed controller is validated under various unbalanced grid scenarios and DC bus voltage imbalances through electromagnetic transient (EMT) simulation using a three-phase, three-level grid-connected CHB–Dual Active Bridge (DAB) converter testbed developed on MATLAB/Simulink. Additionally, the performance of the negative-sequence current regulation is investigated through simulation under different unbalanced grid voltage scenarios.

negative sequence current↗
DOE OSTI2025

Regional-Scale Modeling Parameterizations for Secondary Organic Aerosol Formation from Isoprene Epoxydiols: Experimentally Based Evaluation and Optimization

Isoprene is an abundant volatile organic compound emitted from broadleaf forests. Under low nitric oxide concentrations, isoprene is photochemically oxidized to form gas-phase isoprene epoxydiols (IEPOX). In the presence of acidified sulfate aerosols, IEPOX enhances the secondary organic aerosol (SOA) formation. Predictions of IEPOX-SOA in regional-scale models, e.g., the Community Multiscale Air Quality Model (CMAQ), are uncertain due to homogeneous aerosol assumptions, underpredictions of water uptake (hygroscopicity), and aerosol surface area. Here, we used experimental measurements of IEPOX-SOA tracers, 2-methyltetrols (2-MT) and 2-methyltetrol sulfates (2-MTS), formed at initial IEPOX-to-inorganic sulfate ratios ranging from 1–10.5, at ∼50% relative humidity to constrain key IEPOX-SOA parameters: phase separation, organic shell diffusivity (D org ), acidity, hygroscopic growth, mass accommodation, and kinetics. The base CMAQ parametrization overpredicted experimental IEPOX-SOA with an average normalized mean bias (NMB average ) of 1.63. CMAQ with phase separation underpredicted IEPOX-SOA (NMB average = −0.71). Using the phase-separated model, CMAQ model performance was optimized (NMB average = 0.077) with an increased D org = 2 × 10 –16 m 2 s –1 and increased rate constants (k 2-MT = 1 × 10 –3 M 2 s –1 , k 2-MTS = 8.83 × 10 –3 M 2 s –1 ). The optimized model explicitly accounted for hygroscopic growth by utilizing experimentally derived growth rates, improving aerosol surface area predictions. Our model highlights the importance of the aerosol mixing state (homogeneous versus phase-separated), aerosol size dynamics, and hygroscopic growth in modeling heterogeneous reactive uptake of IEPOX.

aerosols↗
DOE OSTI2023

Impact of trivalent f-element complexation and chemical environment on the radiation-induced chemical reactivity of TODGA and HOPO ligands

Understanding the impact of ionizing radiation on ligands employed and proposed for the separation, recovery, and transport of actinide ions is of vital importance for the innovation of nuclear fuel cycle technologies. In the presence of ionizing radiation fields, complexing ligands are subject to radiolytic processes, that lead to their destruction and the formation of potentially detrimental degradation products. Consequently, mastery of the radiation-induced behavior of these ligands is essential for predicting and optimizing their effectiveness, longevity, and minimizing the negative impacts of radiolysis. Furthermore, this knowledge is critical for the design of more radiation resistant molecules to be incorporated into advanced separation technologies. That said, the radiation chemistry of most actinide complexants have only been studied in the absence of their targeted metal ion complexes, which can lead to inaccurate conclusions on their radiolytic robustness and impacts on performance. With this in mind, we present our findings on the impact of f-element complexation and chemical environment on the radiation-induced chemical reactivity of N,N,N',N'-tetraoctyl diglycolamide (TODGA) and the model octadentate hydroxypyridinone ligand 3,4,3-LI(1,2-HOPO) (abbreviated as HOPO), both promising candidates for actinide separations

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Oscillatory redox behavior in oxides: Cyclic surface reconstruction and reactivity modulation via the Mars–van Krevelen mechanism

The breaking of translational symmetry at oxide surfaces gives rise to coordinatively unsaturated cations/anions and surface restructuring—key factors that govern surface reactivity. Using direct in situ environmental transmission electron microscopy (TEM) observations along with atomistic modeling, we report oscillatory redox behavior in CuO under H 2 , where cyclic surface reconstruction and reactivity modulation occur via the Mars–van Krevelen (MvK) mechanism. We observe self-switching between oxygen-rich and oxygen-deficient surface reconstructions, alternately activating and deactivating the surface for H 2 O formation. During periods of chemical inactivity, the oxygen-deficient surface undergoes slow reoxidation via lattice oxygen diffusing from subsurface and bulk reservoirs, restoring the active oxygen-rich surface termination. The inherent disparity in chemical activity among undercoordinated surface ions, along with sluggish subsurface-to-surface oxygen replenishment, drives this oscillatory redox cycle, modulating H2-induced loss of lattice oxygen at the surface and its delayed replenishment from the subsurface. This creates spatiotemporally separated redox steps at the oxide surface. The phenomena and atomistic insights presented here have significant implications for manipulating the surface reactivity of oxides by tuning the separation of these redox steps.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impacts of molecular architecture on the radiation-induced degradation and reaction kinetics of hydrophobic diglycolamides with the solvated electron and the dodecane radical cation

Given their proposed use as trivalent actinide–lanthanide separation ligands, the role of molecular architecture on the radiation robustness of diglycolamide (DGA) molecules has been investigated. This study examined three prototypical molecules with differences in their aliphatic chain architecture: N,N,N′,N′-tetra(n-octyl)diglycolamide (TODGA), N,N,N′,N′-tetra(2-ethylhexyl)diglycolamide (T2EHDGA), and N,N′-dimethyl-N,N′-dioctyldiglycolamide (DMDODGA). Rate coefficients and activation parameters are reported for the reactivity of each DGA with the solvated electron (e solv − ) and the corresponding dodecane radical cation (RH˙ + ) over the temperature range of 10.0 to 44.1 °C. These measurements indicate that DMDODGA is the most chemically reactive with both transient radicals, which may be attributed to this molecule's more accessible backbone. Complementary gamma dose accumulation studies (≤ 600 kGy) under envisioned process conditions—50 mM DGA in n-dodecane solvent—afforded dose constants for the loss of DGA of d = (3.41 ± 0.07) × 10 −3 , (4.19 ± 0.09) × 10 −3 , and (4.65 ± 0.09) × 10 −3 kGy −1 for T2EHDGA, DMDODGA, and TODGA, respectively. These dose constants indicate that varying DGA architecture affords subtle differences in chemical reactivity, leading to varying rates of radiolytic degradation under envisioned actinide–lanthanide separation conditions. However, more ambitious DGA frameworks, such as modifying the backbone, branching of the aliphatic chains, and/or changing the size of the chain may be required for larger gains in radiolytic longevity while optimizing actinide–lanthanide selectivity.

Arrhenius parameters↗
DOE OSTI2020

Aerosol Optical Tweezers Elucidate the Chemistry, Acidity, Phase Separations, and Morphology of Atmospheric Microdroplets

Aerosol particles represent unique chemical environments because of their high surface area-to-volume ratio that promotes the effects of interfacial chemistry in confined environments. Properties such as viscosity, diffusivity, water content, pH, and morphology—following liquid–liquid phase separation—can strongly alter how a particle interacts with condensable vapors and reactive trace gases, thus modifying its continual evolution and environmental effects. Our understanding of this chemical evolution of atmospheric particulate matter and its environmental impacts is largely limited by our ability to directly observe how these critical particle properties respond to the addition or reactive uptake of new chemical components. Aerosol optical tweezers (AOT) stably trap particles in focused laser beams, providing positional control and the retrieval of many of these critical properties required to understand and predict the chemistry of aerosolized microdroplets. The analytical power of the AOT stems from the retrieval of the cavity-enhanced Raman spectrum induced by the trapping laser. Analysis of the whispering gallery modes (WGMs) that resonate as a standing wave around the droplet’s interface, provide high accuracy measurements of the droplet’s size, refractive index (and thus a measurement of composition), and can distinguish between core–shell, partially engulfed, and homogeneous morphologies. In this study, we have advanced the ability to determine the properties of the core and shell phases in biphasic droplets, including obtaining high-accuracy pH measurements. These capabilities were applied to perform AOT physical chemistry experiments on authentic secondary organic aerosol (SOA) produced directly in the AOT chamber by ozonolysis of terpene vapors. The propensity of the SOA to phase separate as a shell from a wide range of nonpolar to polar core phases was observed, along with the discovery of a stable emulsified state of SOA particles in an aqueous salt droplet. Micron-thick SOA shells did not impede the gain or loss of water or squalane from the core to the surrounding air, indicating no significant diffusional limitations to condensational growth or partitioning even under dry conditions. These experiments formed the foundation of a new framework that predicts how the phase-separated morphology of complex aerosols containing organic carbon evolves during continual atmospheric oxidation processes. Increases in oxidation state will quickly drive conversion from a partially engulfed to core–shell morphology that has dramatically different chemical reactivity since the core phase is completely concealed by the shell. The recent advances in the experimental capabilities of the AOT technique such as presented here enable novel experimental methodologies that provide insights into the chemistry and multidimensional properties of aerosol microdroplets, and how these coevolve and respond to continual chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Protein-activated atomic layer deposition for robust crude-oil-repellent hierarchical nano-armored membranes

Atomic layer deposition (ALD) offers unique capabilities to fabricate atomically engineered porous materials with precise pore tuning and multi-functionalization for diverse applications like advanced membrane separations towards sustainable energy-water systems. However, current ALD technique is inhibited on most non-polar polymeric membranes due to lack of accessible nucleation sites. Here, in this study, we report a facile method to efficiently promote ALD coating on hydrophobic surface of polymeric membranes via novel protein activation/sensitization. As a proof of concept, TiO 2 ALD-coated membranes activated by bovine serum albumin exhibit remarkable superhydrophilicity, ultralow underwater crude oil adhesion, and robust tolerance to rigorous environments including acid, alkali, saline, and ethanol. Most importantly, excellent cyclable crude oil-in-water emulsion separation performance can be achieved. The mechanism for activation/sensitization is rooted in reactivity for a particular set of amino acids. Furthermore, the universality of protein-sensitized ALD is demonstrated using common egg white, promising numerous potential usages in biomedical engineering, environmental remediation, lowcarbon manufacturing, catalysis, and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unexpected Kinetic Solvent Effects Enhance Activity and Selectivity in Biphasic Systems

Biphasic dehydration of fructose to 5-hydroxymethylfurfural (HMF) has shown unprecedented increases in productivity, but a mechanistic understanding is lacking. Herein, we couple fast experimental reaction kinetics, multiscale modeling (phase behavior, classical molecular dynamics(MD), and quantum mechanics/molecular mechanics MD), in situ sampling, and IR and 13 C-NMR spectroscopy to elucidate the complex effects of nonpolar extracting organic solvents on the kinetics of fructose dehydration. We show that these organic solvents can reach significant mutual solubility with water at reaction temperatures, enabling the partition of the sugar and catalyst into the extracting phase. In the organic-rich environment, the dehydration of fructose proceeds faster and more selectively than in water due to increased relative abundance of the reactive furanose isomer, enhanced water–catalyst–substrate interactions driven by nanophase separation, and higher product stability stemming from preferential solvation. Furthermore, we demonstrate that these solvent effects impact other critical biphasic reactions in biomass upgrading and provide qualitative principles for solvent selection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Engineered disorder in CO 2 photocatalysis

Light harvesting, separation of charge carriers, and surface reactions are three fundamental steps that are essential for an efficient photocatalyst. Here we show that these steps in the TiO 2 can be boosted simultaneously by disorder engineering. A solid-state reduction reaction between sodium and TiO 2 forms a core-shell c-TiO 2 @a-TiO 2-x (OH) y heterostructure, comprised of HO-Ti-[O]-Ti surface frustrated Lewis pairs (SFLPs) embedded in an amorphous shell surrounding a crystalline core, which enables a new genre of chemical reactivity. Specifically, these SFLPs heterolytically dissociate dihydrogen at room temperature to form charge-balancing protonated hydroxyl groups and hydrides at unsaturated titanium surface sites, which display high reactivity towards CO 2 reduction. This crystalline-amorphous heterostructure also boosts light absorption, charge carrier separation and transfer to SFLPs, while prolonged carrier lifetimes and photothermal heat generation further enhance reactivity. The collective results of this study motivate a general approach for catalytically generating sustainable chemicals and fuels through engineered disorder in heterogeneous CO 2 photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polymeric membranes for CO 2 separation and capture

Over the past decade, CO 2 separation and capture have become the new bandwagon for polymer science and membrane research. This review presents the fundamentals of CO 2 /gas separation in polymeric membranes and discusses how these principles underpin opportunities and challenges for post-combustion carbon capture (CO 2 /N 2 ), hydrogen purification (CO 2 /H 2 ), and natural gas and biogas sweetening (CO 2 /CH 4 ). Emerging polymeric membrane materials are discussed, including a few polymers containing a high content of polar functional groups (i.e., ether oxygen-rich polymers and polymeric ionic liquids), shape-persisting glassy polymers (i.e., perfluoropolymers, thermally rearranged polymers, iptycene-containing polymers), and reactive polymers featuring facilitated transport. Moreover, the promising candidates for each CO 2 separation application are highlighted. Lastly, the permeability-selectivity data reviewed were plotted against their 2008 and 2019 upper bounds.

08 HYDROGEN↗
DOE OSTI2026

Mechanistic Tuning of Chemical Transformations for Coupling the Geo-mimicry of Acid Gas Storage with Design Strategies to Produce Clean Energy Carriers in Multi-Phase Reaction Environments (MATTER) (Final Report)

The need to diversify approaches to produce essential energy carriers such as H 2 motivate advances in thermodynamically downhill geo-inspired pathways. Currently, more than 80% of hydrogen is produced via steam methane reforming (SMR) followed by water gas shift reaction (WGSR) pathway with the co-production of CO 2 . As an alternative to introducing CO 2 separation strategies downstream such as the use of membranes, solvents, or sorbents, geo-inspired carbon mineralization is harnessed as an alternative crystallization pathway. The thermodynamically downhill carbon mineralization pathways are hypothesized to accelerate H2 conversion while separating CO 2 . The work conducted through this project discusses the mechanisms associated with coupling the water gas shift reaction (WGSR) with carbon mineralization. In addition to harnessing Ca- and Mg-bearing oxides or hydroxides that are known to be reactive for CO 2 capture, the use of earth abundant silicate minerals such as Ca- and Mg-bearing silicates, is also investigated. Key outcomes include approaches to architect Mg-silicate with well-controlled pore size distributions, probing the enhancement in H 2 yield with inherent CO 2 suppression using Ca- and Mg-bearing oxides, hydroxides, and silicates, elucidating the changes in silicate chemistry during carbon mineralization, and exploring direct integration of carbon mineralization with WGSR and the development of separate low temperature pathway for reactive CO 2 capture and mineralization are developed.

08 HYDROGEN↗
DOE OSTI2023

Coordination-Dependent Chemical Reactivity of TFSI Anions at a Mg Metal Interface

Charge transfer across the electrode–electrolyte interface is a highly complex and convoluted process involving diverse solvated species with varying structures and compositions. Despite recent advances in in situ and operando interfacial analysis, molecular specific reactivity of solvated species is inaccessible due to a lack of precise control over the interfacial constituents and/or an unclear understanding of their spectroscopic fingerprints. However, such molecular-specific understanding is critical to the rational design of energy-efficient solid–electrolyte interphase layers. We have employed ion soft landing, a versatile and highly controlled method, to prepare well-defined interfaces assembled with selected ions, either as solvated species or as bare ions, with distinguishing molecular precision. Equipped with precise control over interfacial composition, we employed in situ multimodal spectroscopic characterization to unravel the molecular specific reactivity of Mg solvated species comprising (i.e., bis(trifluoromethanesulfonyl)imide, TFSI – ) anions and solvent molecules (i.e., dimethoxyethane, DME/G1) on a Mg metal surface relevant to multivalent Mg batteries. In situ multimodal spectroscopic characterization revealed higher reactivity of the undercoordinated solvated species [Mg-TFSI-G1] + compared to the fully coordinated [Mg-TFSI-(G1) 2 ] + species or even the bare TFSI – . These results were corroborated by the computed reaction pathways and energy barriers for decomposition of the TFSI – within Mg solvated species relative to bare TFSI – . Finally, we evaluated the TFSI reactivity under electrochemical conditions using Mg(TFSI) 2 –DME-based phase-separated electrolytes representing different solvated constituents. Based on our multimodal study, we report a detailed understanding of TFSI – decomposition processes as part of coordinated solvated species at a Mg-metal anode that will aid the rational design of improved sustainable electrochemical energy technologies.

25 ENERGY STORAGE↗
DOE OSTI2020

Operator inference for non-intrusive model reduction of systems with non-polynomial nonlinear terms

Here in this work we present a non-intrusive model reduction method to learn low-dimensional models of dynamical systems with non-polynomial nonlinear terms that are spatially local and that are given in analytic form. In contrast to state-of-the-art model reduction methods that are intrusive and thus require full knowledge of the governing equations and the operators of a full model of the discretized dynamical system, the proposed approach requires only the non-polynomial terms in analytic form and learns the rest of the dynamics from snapshots computed with a potentially black-box full-model solver. The proposed method learns operators for the linear and polynomially nonlinear dynamics via a least-squares problem, where the given non-polynomial terms are incorporated on the right-hand side. The least-squares problem is linear and thus can be solved efficiently in practice. The proposed method is demonstrated on three problems governed by partial differential equations, namely the diffusion–reaction Chafee–Infante model, a tubular reactor model for reactive flows, and a batch-chromatography model that describes a chemical separation process. The numerical results provide evidence that the proposed approach learns reduced models that achieve comparable accuracy as models constructed with state-of-the-art intrusive model reduction methods that require full knowledge of the governing equations.

42 ENGINEERING↗