Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

NASA’s Radioisotope Power Systems Program: Status Update

Radioisotope power systems (RPS) have safely been in use in the United States for over 60 years. RPS-enabled NASA missions have utilized space nuclear power to explore planets, moons, and interstellar space. This exploration resulted in changes to our understanding of our Solar System and our place within it. In 2010, NASA HQ established a NASA program to invest in RPS technologies and systems that could enable future missions. The RPS Program ensures the availability of RPS for the exploration of the solar system in environments where conventional solar or chemical power generation is impractical or impossible. The RPS Program, in partnership with the Department of Energy (DOE) Office of Nuclear Energy continues to operate as an interagency partnership to provide robust power system solutions to spacecrafts that conduct missions for exploration and science that otherwise would not be feasible. This paper provides a synopsis of current activities after well over a decade of formal interagency partnering.

Radioisotope↗
DOE OSTI2024

Radioisotope Power System Cask Trailer Chiller Low Heat Load Study

This report documents the study of the Radioisotope Thermoelectric Generator Transport System (RTGTS) chillers capability to transport a Radioisotope Power System (RPS) with low heat loads in the cask. Tests of the RTGTS chillers included setting the glycol/water (coolant) temperature to a control set point of 40° and 60°F while applying heat loads ranging from 2500 to 0 W heat load. The tests performed showed that the chiller systems could handle the entire range of heat loads. However, a noise/vibration started to occur when the set point was 60°F with low heat loads. Three recommended changes to the RTGTS chillers are recommended with varying implementation windows. The first is an operational change that can be implemented immediately. The RTGTS chillers should have a set point of 40°F when transporting an RPS less than 1500 W. The second is a short-term change (within the next two years) augmenting RPS heat by utilizing one RTGTS onboard heater (2500 W) while transporting an RPS with less than 1500 W which will also require a change to the Instrument and Data Acquisition System (IDAS) to allow monitoring and possible control of power to the onboard heaters. However, if the heater does fail during transport, no emergency actions or immediate repairs will be required due to the chillers’ ability to handle low heat loads. Running a 2500 W heater when transporting low heat loads aids in prolonging the life of the chillers. The remaining recommended long-term change is to replace the current chillers with a new portable or permanently installed chiller system in the next five to ten years. This time frame takes advantage of the proven reliability and durability of the current chillers while the new chillers are phased in and proven to the RPS program.

42 ENGINEERING↗
NASA NTRS2005

NASA Radioisotope Power Conversion Technology NRA Overview

The focus of the National Aeronautics and Space Administration's (NASA) Radioisotope Power Systems (RPS) Development program is aimed at developing nuclear power and technologies that would improve the effectiveness of space science missions. The Radioisotope Power Conversion Technology (RPCT) NASA Research Announcement (NRA) is an important mechanism through which research and technology activities are supported in the Advanced Power Conversion Research and Technology project of the Advanced Radioisotope Power Systems Development program. The purpose of the RPCT NRA is to advance the development of radioisotope power conversion technologies to provide higher efficiencies and specific powers than existing systems. These advances would enable a factor of two to four decrease in the amount of fuel and a reduction of waste heat required to generate electrical power, and thus could result in more cost effective science missions for NASA. The RPCT NRA selected advanced RPS power conversion technology research and development proposals in the following three areas: innovative RPS power conversion research, RPS power conversion technology development in a nominal 100 W(sub e) scale; and, milliwatt/multi-watt RPS (mWRPS) power conversion research. Ten RPCT NRA contracts were awarded in 2003 in the areas of Brayton, Stirling, thermoelectric (TE), and thermophotovoltaic (TPV) power conversion technologies. This paper will provide an overview of the RPCT NRA, a summary of the power conversion technologies approaches being pursued, and a brief digest of first year accomplishments.

Anderson, David J.↗
NASA NTRS2005

NASA Radioisotope Power Conversion Technology NRA Overview

The focus of the National Aeronautics and Space Administration s (NASA) Radioisotope Power Systems (RPS) Development program is aimed at developing nuclear power and technologies that would improve the effectiveness of space science missions. The Radioisotope Power Conversion Technology (RPCT) NASA Research Announcement (NRA) is an important mechanism through which research and technology activities are supported in the Advanced Power Conversion Research and Technology project of the Advanced Radioisotope Power Systems Development program. The purpose of the RPCT NRA is to advance the development of radioisotope power conversion technologies to provide higher efficiencies and specific powers than existing systems. These advances would enable a factor of 2 to 4 decrease in the amount of fuel and a reduction of waste heat required to generate electrical power, and thus could result in more cost effective science missions for NASA. The RPCT NRA selected advanced RPS power conversion technology research and development proposals in the following three areas: innovative RPS power conversion research, RPS power conversion technology development in a nominal 100We scale; and, milliwatt/multi-watt RPS (mWRPS) power conversion research. Ten RPCT NRA contracts were awarded in 2003 in the areas of Brayton, Stirling, thermoelectric (TE), and thermophotovoltaic (TPV) power conversion technologies. This paper will provide an overview of the RPCT NRA, a summary of the power conversion technologies approaches being pursued, and a brief digest of first year accomplishments.

Anderson, David J.↗
NASA NTRS2016

Stirling to Flight Initiative

NASA has a consistent need for radioisotope power systems (RPS) to enable robotic scientific missions for planetary exploration that has been present for over four decades and will continue into the foreseeable future, as documented in the most recent Planetary Science Decadal Study Report. As RPS have evolved throughout the years, there has also grown a desire for more efficient power systems, allowing NASA to serve as good stewards of the limited plutonium-238 (238Pu), while also supporting the ever-present need to minimize mass and potential impacts to the desired science measurements. In fact, the recent Nuclear Power Assessment Study (NPAS) released in April 2015 resulted in several key conclusion regarding RPS, including affirmation that RPS will be necessary well into the 2030s (at least) and that 238Pu is indeed a precious resource requiring efficient utilization and preservation. Stirling Radioisotope Generators (SRGs) combine a Stirling cycle engine powered by a radioisotope heater unit into a single generator system. Stirling engine technology has been under development at NASA Glenn Research Center (GRC) in partnership with the Department of Energy (DOE) since the 1970's. The most recent design, the 238Pu-fueled Advanced Stirling Radioisotope Generator (ASRG), was offered as part of the NASA Discovery 2010 Announcement of Opportunity (AO). The Step-2 selections for this AO included two ASRG-enabled concepts, the Titan Mare Explorer (TiME) and the Comet Hopper (CHopper), although the only non-nuclear concept, InSight, was ultimately chosen. The DOE's ASRG contract was terminated in 2013. Given that SRGs utilize significantly less 238Pu than traditional Radioisotope Thermoelectric Generators (RTGs) - approximately one quarter of the nuclear fuel, to produce similar electrical power output - they provide a technology worthy of consideration for meeting the aforementioned NASA objectives. NASA's RPS Program Office has recently investigated a new Stirling to Flight (S2F) initiative with the objective of developing a 100-500 We Stirling generator system. Additionally, a different approach is being devised for this initiative to avoid pitfalls of the past, and apply lessons learned from the recent ASRG experience. Two key aspects of this initiative are a Stirling System Technology Maturation Effort, and a Surrogate Mission Team (SMT) intended to provide clear mission pull and requirements context. The S2F project seeks to lead directly into a DOE flight system development of a new SRG. This paper will detail the proposed S2F initiative, and provide specifics on the key efforts designed to pave a forward path for bringing Stirling technology to flight.

Robotics↗
NASA NTRS2016

Usage of Multi-Mission Radioisotope Thermoelectric Generators (MMRTGs) for Future Potential Missions

The goal of NASAs Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet the needs of the missions. To meet this goal, the RPS Program, working closely with the Department of Energy, performs mission and system studies (such as the recently released Nuclear Power Assessment Study), evaluates the readiness of promising technologies to infuse in future generators, assesses the sustainment of key RPS capabilities and knowledge, forecasts and tracks the Programs budgetary needs, and disseminates current information about RPS to the community of potential users. This presentation focuses on the needs of the mission community and provides users a better understanding of how to integrate the MMRTG (Multi-Mission Radioisotope Thermoelectric Generator).

Radioisotope↗
NASA NTRS2018

Stirling Convertor Controller Development at NASA Glenn Research Center

For nearly two decades, NASA Glenn Research Center (GRC) has been supporting the development of Radioisotope Power Systems (RPS). NASA desires higher conversion efficiency RPS options that are reliable and robust with long life design. Dynamic conversion, such as Stirling and Brayton, offer the potential for higher conversion efficiencies than current RPS but have yet to be demonstrated in a flight application. The RPS program sent out a solicitation to investigate options for dynamic conversion technologies. As a result of this solicitation, four dynamic power convertor (DPC) technologies were selected for design and three are proceeding to the fabrication phase of prototype dynamic convertors. One lesson learned from the Advanced Stirling Radioisotope Generator (ASRG) project is that controller development should be coordinated with the development of a dynamic convertor. As a result of this, NASA GRC has been utilizing hardware from past Stirling convertor projects including that of the ASRG to support controller development for the DPC's. NASA GRC has developed a strong knowledge base on both analog and digital Stirling dynamic power convertor controllers and will continue to expand and apply that knowledge to the DPC's. Over the past 15 years, controllers were developed at GRC, at Lockheed Martin (LM) and by the Johns Hopkins University/Applied Physics Laboratory (JHU/APL). Various generations of the controllers have been developed as lessons were learned through various component and system level tests. Some of the tests performed were fault tolerance, flight acceptance vibration, electromagnetic interference (EMI), spacecraft integration, and extended operation. The fault tolerance test characterized the controller's ability to handle various fault conditions, including high or low bus power consumptions, total open load or short circuit, and replacing a failed controller card while the backup maintains control of the Stirling convertor. The vibration test confirms the controller's ability to control an ASC during launch. The EMI test characterized the AC and DC magnetic and electric fields emitted by the single ASC and if the controller has an impact on the radiated EMI. Spacecraft integration testing in the Radioisotope Power Systems System Integration Laboratory (RSIL) provided insight into the electrical interactions between the representative RPS, its associated control schemes, and realistic electric system loads. The extended operation test allows data to be collected over a period of thousands of hours to obtain long term performance data of the system. This paper describes the history of controller development at NASA GRC, tests performed on these controllers, and lessons learned.

Dugala, Gina M.↗
NASA NTRS2018

1-Watt Radioisotope Power System for Small Spacecraft

A variety of mission concepts have been studied by NASA and the U. S. Department of Energy that would utilize low power Radioisotope Power Systems (RPS) for small probes, landers, rovers, and communication repeaters. These missions would contain science measuring instruments that could be distributed across planetary surfaces for operation in temporarily or permanently shadowed regions. High efficiency dynamic RPS could be mission enabling for science measurements on the moon, such as collecting real-time, event-based, or cumulative space radiation measurements including primary galactic cosmic rays (GCR), solar particle events (SPE), and secondary particles liberated during atmospheric and/or surface reactions. Small RPS would use fractional versions of the General Purpose Heat Source (GPHS) or Light Weight Radioisotope Heater Units (LWRHU), to heat the power conversion technologies. Capable of three to four times higher conversion efficiency than static technologies, dynamic RPS would provide an equal amount of power using less fuel or more power using an equal amount of fuel. Providing spacecraft with more power could decrease duty cycling of basic functions and increase the quality and abundance of science data. Low power Stirling convertors are being developed at NASA Glenn Research Center (GRC) to provide future micro spacecraft with electrical power by converting heat from one or more LWRHUs. An initial concept would convert eight Watts of heat to one Watt of electrical power output for science instruments and communication. The initial design, called Small Stirling Technology Exploration Power (smallSTEP), is 11 cm diameter X 32 cm long, weighs around 3 kg, and could be used to charge batteries or capacitors for higher power burst usage. Development of the 1-watt RPS includes maturation of a Stirling engine and linear alternator, an electronics controller, and an evacuated metal foil insulation package. Test hardware and facilities are being prepared for initial demonstration of the subassemblies in a laboratory environment.

Wilson, Scott↗
NASA NTRS2019

Implementation of Cross-Agency Nuclear Applications

The Radioisotope Power System (RPS) Program was established in 2009 to manage RPS investments for NASA to ensure the availability of RPS for the exploration of the solar system in environments where conventional solar or chemical power generation is impractical or impossible. The RPS Program is a multi-center and multi-agency program. NASA is in partnership with the Department of Energy (DOE) Office of Nuclear Energy to provide technologically robust nuclear power system solutions to robotic spacecraft and exploration missions. During the last decade, the RPS Program and DOE have supported missions, developed technologies and initiated new power system developments. These technical areas, as all technical areas, have challenges and standard engineering solutions; however, clearing the path to enable the technical work requires agreements to be established. This paper describes a process by which two governmental agencies have established a successful basis to accomplish the needed work.

Zakrajsek, June F.↗
NASA NTRS2021

Historical “Duration of Use” Power Figure Research and Update

Compared to actual demonstrated mission usage, boundaries in recent historical figures were much higher than actual required levels, especially for primary batteries, fuel cells, and dynamic RPS. Boundaries for solar and static RPS architectures remained mostly unchanged. Beyond looking only at demonstrated mission performance, current funded programs that would change the boundaries further were also considered. Considering these programs, boundaries for primary batteries, solar, and dynamic RPS do increase modestly. The investigation of the power level versus distance (AU) revealed the most practical locations of use for each architecture. Fuel cell use has been concentrated around earth’s orbit as they provide high power levels for shorter duration. Solar has been demonstrated from very close to the Sun out to Jupiter as solar power generation levels begin to dissipate. Primary batteries have been demonstrated in numerous probes from Venus out to Saturn. Finally, static RPS systems have traveled from Venus out past 150 AU outside the solar system. Considering current funded programs, power levels for solar do increase at Earth and Jupiter. The investigation of the historical power level change over time revealed that early assumed chemical power levels were quite high compared to current projections. Solar power sources appear to have matured over time and seem to have increased as chemical decreased. Static RPS systems have remained relatively stable since their introduction.

Marc R Hayhurst↗
NASA NTRSDate not supplied

The European Radioisotope Power Systems Program: Updates & Synergies

Radioisotope power systems (RPS) are an essential building block of the space exploration strategies of a number of countries around the world. The UK, US and the European Space Agency (ESA) view RPS technologies as enabling for a range of scientific space missions targeting the most challenging, distant, and cold environments in the solar system over the coming decades. However, RPS interest and associated capabilities are growing across the globe, where drivers include the increasing importance of space to address defense and commercial interests. Most missions have utilized 238 Pu as the radioisotope of choice to generate electrical power and to produce heat for the operation and thermal management of spacecraft systems. In Europe, since 2009, 241 Am in ceramic form has been selected for the ESA RPS development program. The ESA program has evolved in the past few years into a cross directorate program. This paper provides an update on this RPS technology program with a focus on technology updates, missions and partnerships.

Americium↗
DOE OSTI2022

FGC 1287 and its enigmatic 250 kpc long HI tail in the outskirts of Abell 1367

ABSTRACT We present H i and radio continuum, narrow-band Hα imaging, IFU spectroscopy, and X-ray observations of the FGC 1287 triplet projected ∼1.8 Mpc west of the galaxy cluster Abell 1367. One triplet member, FGC 1287, displays an exceptionally long, 250 kpc H i tail and an unperturbed stellar disc which are the typical signatures of ram pressure stripping (RPS). To generate detectable RPS signatures the presence of an Intracluster medium ICM or intragroup medium IGM with sufficient density to produce RPS at a realistic velocity relative to the ICM or IGM is a prerequisite. However, XMM–Newton observations were not able to detect X-ray emission from the triplet, implying that if a hot ICM/IGM is present, its density, ne, is less than 2.6 × 10−5 cm−3. Higher resolution VLA H i data presented here show FGC 1287’s H i disc is truncated and significantly warped, whereas the H i tail is clumpy. TNG Hα imaging identified three star-forming clumps projected within 20 kpc of FGC 1287’s disc, with VIMOS–IFU data confirming two of these are counterparts to H i clumps in the tail. The triplet’s H i kinematics, together with Hα and radio continuum imaging suggests an interaction may have enhanced star formation in FGC 1287’s disc, but cannot readily account for the origin of the long H i tail. We consider several scenarios which might reconcile RPS with the non-detection of ICM or IGM X-ray emission but none of these unambiguously explains the origin of the long H i tail.

Scott, T. C. (ORCID:0000000237464859)↗
DOE OSTI2023

Diagnostic diagrams for ram pressure stripped candidates

ABSTRACT This paper presents a method for finding ram pressure stripped (RPS) galaxy candidates by performing a morphological analysis of galaxy images obtained from the Legacy survey. We consider a sample of about 600 galaxies located in different environments such as groups and clusters, tidally interacting pairs and the field. The sample includes 160 RPS previously classified in the literature into classes from J1 to J5, based on the increasing level of disturbances. Our morphological analysis was done using the astromorphlib software followed by the inspection of diagnostic diagrams involving combinations of different parameters like the asymmetry (A), concentration (C), Sérsic index (n), and bulge strength parameters $F(G,\, M_{20})$. We found that some of those diagrams display a distinct region in which galaxies classified as J3, J4, and J5 decouples from isolated galaxies. We call this region as the morphological transition zone and we also found that tidally interacting galaxies in pairs are predominant within this zone. Nevertheless, after visually inspecting the objects in the morphological transition zone to discard obvious contaminants, we ended up with 33 bona fide new RPS candidates in the studied nearby groups and clusters (Hydra, Fornax, and CLoGS sample), of which one-third show clear evidence of unwinding arms. Future works may potentially further increase significantly the samples of known RPS using such method.

Astronomy & Astrophysics↗
DOE OSTI2021

Repeal of the Clean Power Plan: Social Cost and Distributional Implications

The Clean Power Plan (CPP) was repealed due to concerns about the “unnecessary, costly burdens” it may impose on electric utilities, thereby delaying efforts to reduce carbon dioxide emissions (CO 2 ) from the electricity sector. This paper examines the greenhouse gas and welfare implications of this repeal while incorporating the presence of the state renewable portfolio standards (RPS) in the US as the status quo. We assess the carbon abatement and welfare costs with the CPP relative to two alternative baselines: a no–policy baseline and a pre–existing policy baseline with the RPS. The CPP is implemented as a regional mass–based standard, a regional rate–based standard, or as a national mass–based standard with trading of emissions across regions over the 2022–2030 period. We find that the incremental discounted welfare costs per metric ton of CO 2 that would have been abated by the CPP relative to the RPS would be substantially lower than the global social cost of CO 2 . However, the overall costs of carbon abatement with the CPP added to the RPS would have become higher than the social cost of carbon when estimated relative to a no–policy baseline, except with a national mass–based CPP. Across all policy combinations and choice of baselines, the aggregate welfare costs were lowest under a national mass–based standard and highest under the regional rate–based standard. Here, we also find that the CPP would have imposed large welfare costs on consumers and fossil fuel producers while benefiting the renewable fuel producers.

, Q42↗
DOE OSTI2023

Impact of Polymicrobial Infection on Fitness of Streptococcus gordonii In Vivo

Pathogenic microbial ecosystems are often polymicrobial, and interbacterial interactions drive emergent properties of these communities. In the oral cavity, Streptococcus gordonii is a foundational species in the development of plaque biofilms, which can contribute to periodontal disease and, after gaining access to the bloodstream, target remote sites such as heart valves. Here, we used a transposon sequencing (Tn-Seq) library of S. gordonii to identify genes that influence fitness in a murine abscess model, both as a monoinfection and as a coinfection with an oral partner species, Porphyromonas gingivalis. In the context of a monoinfection, conditionally essential genes were widely distributed among functional pathways. Coinfection with P. gingivalis almost completely changed the nature of in vivo gene essentiality. Community-dependent essential (CoDE) genes under the coinfection condition were primarily related to DNA replication, transcription, and translation, indicating that robust growth and replication are required to survive with P. gingivalis in vivo. Interestingly, a group of genes in an operon encoding streptococcal receptor polysaccharide (RPS) were associated with decreased fitness of S. gordonii in a coinfection with P. gingivalis. Individual deletion of two of these genes (SGO_2020 and SGO_2024) resulted in the loss of RPS production by S. gordonii and increased susceptibility to killing by neutrophils. P. gingivalis protected the RPS mutants by inhibiting neutrophil recruitment, degranulation, and neutrophil extracellular trap (NET) formation. These results provide insight into genes and functions that are important for S. gordonii survival in vivo and the nature of polymicrobial synergy with P. gingivalis. Furthermore, we show that RPS-mediated immune protection in S. gordonii is dispensable and detrimental in the presence of a synergistic partner species that can interfere with neutrophil killing mechanisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Warped Disk Galaxies. I. Linking U-type Warps in Groups/Clusters to Jellyfish Galaxies

Warped disk galaxies are classified into two morphologies: S and U types. Conventional theories routinely attribute both types to galactic tidal interaction and/or gas accretion, but reproducing U types in simulations is extremely challenging. Here we investigate whether both types are governed by the same mechanisms using the most extensive sample of ~8000 nearby (0.02 < z < 0.06) massive (M*/M ⊙ > 10 9 ) edge-on disks from the Sloan Digital Sky Survey. We find that U types show on average bluer optical colors and a higher specific star formation rate (sSFR) than S types, with more strongly warped U types having a higher sSFR. We also find that while the S-type warp properties correlate with the tidal force by the nearest neighbor regardless of the environment, there is no such correlation for U types in groups/clusters, suggesting a nontidal mechanism could be at play for U types, such as ram pressure stripping (RPS). Indeed, U types are more common in groups/clusters than in fields and they have stellar mass, gas fraction, sSFR enhancement, and phase-space distribution closely analogous to RPS-induced jellyfish galaxies in clusters. We furthermore show that the stellar disks of most RPS galaxies in the IllustrisTNG simulation are warped in a U shape and bent in the opposite direction of stripped gas tails, satisfying theoretical expectations for stellar warps embedded in jellyfishes. We therefore suggest that despite the majority of U types that live in fields being still less explained, RPS can be an alternative origin for those in groups/clusters.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2004

Advanced Radioisotope Power Conversion Technology Research and Development

NASA's Radioisotope Power Conversion Technology program is developing next generation power conversion technologies that will enable future missions that have requirements that cannot be met by either the ubiquitous photovoltaic systems or by current Radioisotope Power System (RPS) technology. Performance goals of advanced radioisotope power systems include improvement over the state-of-practice General Purpose Heat Source/Radioisotope Thermoelectric Generator by providing significantly higher efficiency to reduce the number of radioisotope fuel modules, and increase specific power (watts/kilogram). Other Advanced RPS goals include safety, long-life, reliability, scalability, multi-mission capability, resistance to radiation, and minimal interference with the scientific payload. NASA has awarded ten contracts in the technology areas of Brayton, Stirling, Thermoelectric, and Thermophotovoltaic power conversion including five development contracts that deal with more mature technologies and five research contracts. The Advanced RPS Systems Assessment Team includes members from NASA GRC, JPL, DOE and Orbital Sciences whose function is to review the technologies being developed under the ten Radioisotope Power Conversion Technology contracts and assess their relevance to NASA's future missions. Presented is an overview of the ten radioisotope power conversion technology contracts and NASA's Advanced RPS Systems Assessment Team.

Wong, Wayne A.↗