Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Molecular elimination of Br{sub 2} in photodissociation of CH{sub 2}BrC(O)Br at 248 nm using cavity ring-down absorption spectroscopy

The primary elimination channel of bromine molecule in one-photon dissociation of CH{sub 2}BrC(O)Br at 248 nm is investigated using cavity ring-down absorption spectroscopy. By means of spectral simulation, the ratio of nascent vibrational population in v = 0, 1, and 2 levels is evaluated to be 1:(0.5 {+-} 0.1):(0.2 {+-} 0.1), corresponding to a Boltzmann vibrational temperature of 581 {+-} 45 K. The quantum yield of the ground state Br{sub 2} elimination reaction is determined to be 0.24 {+-} 0.08. With the aid of ab initio potential energy calculations, the obtained Br{sub 2} fragments are anticipated to dissociate on the electronic ground state, yielding vibrationally hot Br{sub 2} products. The temperature-dependence measurements support the proposed pathway via internal conversion. For comparison, the Br{sub 2} yields are obtained analogously from CH{sub 3}CHBrC(O)Br and (CH{sub 3}){sub 2}CBrC(O)Br to be 0.03 and 0.06, respectively. The trend of Br{sub 2} yields among the three compounds is consistent with the branching ratio evaluation by Rice-Ramsperger-Kassel-Marcus method. However, the latter result for each molecule is smaller by an order of magnitude than the yield findings. A non-statistical pathway so-called roaming process might be an alternative to the Br{sub 2} production, and its contribution might account for the underestimate of the branching ratio calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoelectric sheath formation around small spherical objects in space

The formation of a photoelectron sheath around positively charged small (∼cm) spherical objects roaming in near earth space due to the solar radiation (with continuous spectrum) and the solar wind plasma has been investigated. The sheath structure has been derived, taking into account anisotropic photoelectron flux with the Poisson equation, spherical geometry of the object, and half Fermi Dirac distribution of photoelectron velocities. Two cases, viz., when the object is illuminated by (i) isotropic or (ii) unidirectional (parallel beam) radiation, have been analyzed. The analysis predicts a spherically symmetric sheath in case of isotropic illumination, while a symmetry in sheath about a θ=π/4 is seen in case of parallel beam illumination; θ is the angle of incidence which is the angle made by the normal to a surface element with the direction of incidence of solar radiation. The radial and angular profiles of the electric potential and electron density in the photoelectron sheath have been evaluated and illustrated graphically; the dependence of the sheath structure on the solar wind plasma parameters, material properties of the spherical object, and its size have been discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Metallization of colloidal crystals

Colloidal crystals formed by size-asymmetric binary particles coassemble into a wide variety of colloidal compounds with lattices akin to ionic crystals. Recently, a transition from a compound phase with a sublattice of small particles to a metal-like phase in which the small particles are delocalized has been predicted computationally and observed experimentally. In this colloidal metallic phase, the small particles roam the crystal maintaining the integrity of the lattice of large particles, as electrons do in metals. A similar transition also occurs in superionic crystals, termed sublattice melting. Here, we use energetic principles and a generalized molecular dynamics model of a binary system of functionalized nanoparticles to analyze the transition to sublattice delocalization in different coassembled crystal phases as a function of temperature (T), number of grafted chains on the small particles, and number ratio between the small and large particles n s : n l . Here we find that n s : n l is the primary determinant of crystal type due to energetic interactions and interstitial site filling, while the number of grafted chains per small particle determines the stability of these crystals. We observe first-order sublattice delocalization transitions as T increases, in which the host lattice transforms from low- to high-symmetry crystal structures, including A20 → bct → bcc, A d → bct → bcc, and bcc → bcc/fcc → fcc transitions and lattices. Analogous sublattice transitions driven primarily by lattice vibrations have been seen in some atomic materials exhibiting an insulator-metal transition also referred to as metallization. We also find minima in the lattice vibrations and diffusion coefficient of small particles as a function of n s : n l , indicating enhanced stability of certain crystal structures for n s : n l values that form compounds.

36 MATERIALS SCIENCE↗

NeoN: Neuromorphic Control for Autonomous Robotic Navigation

In this paper we describe the use of a new neuromorphic computing framework to implement the navigation system for a roaming, obstacle avoidance robot. Using a Dynamic Adaptive Neural Network Array (DANNA) structure, our TENNLab (Laboratory of Tennesseans Exploring Neural Networks) hardware/software co-design framework and evolutionary optimization (EO) as the training algorithm, we create, train, implement, and test a spiking neural network autonomous robot control system using an array of neuromorphic computing elements built on an FPGA. The simplicity and flexibility of the DANNA neuromorphic computing elements allow for sufficient scale and connectivity on a Xilinx Kintex-7 FPGA to support sensory input and motor control for a mobile robot to navigate a dynamically changing environment. We further describe how more complex capabilities can be added using the same platform, e.g. object identification and tracking.

Mitchell, J. Parker↗

Defense on the Move: Ant-Based Cyber Defense

Many common cyber defenses (like firewalls and IDS) are as static as trench warfare allowing the attacker freedom to probe them at will. The concept of Moving Target Defense (MTD) adds dynamism to the defender side, but puts the systems to be defended themselves in motion, potentially at great cost to the defender. An alternative approach is a mobile resilient defense that removes attackers’ ability to rely on prior experience without requiring motion in the protected infrastructure itself. The defensive technology absorbs most of the cost of motion, is resilient to attack, and is unpredictable to attackers. The Ant-Based Cyber Defense (ABCD) is a mobile resilient defense providing a set of roaming, bio-inspired, digital-ant agents working with stationary agents in a hierarchy headed by a human supervisor. The ABCD approach provides a resilient, extensible, and flexible defense that can scale to large, multi-enterprise infrastructures like the smart electric grid.

Cyber Security↗

Particle analogs of electrons in colloidal crystals

A versatile method for the design of colloidal crystals involves the use of DNA as a particle-directing ligand. With such systems, DNA-nanoparticle conjugates are considered programmable atom equivalents (PAEs), and design rules have been devised to engineer crystallization outcomes. This work shows that when reduced in size and DNA grafting density, PAEs behave as electron equivalents (EEs), roaming through and stabilizing the lattices defined by larger PAEs, as electrons do in metals in the classical picture. This discovery defines a new property of colloidal crystals—metallicity—that is characterized by the extent of EE delocalization and diffusion. As the number of strands increases or the temperature decreases, the EEs localize, which is structurally reminiscent of a metal-insulator transition. Colloidal crystal metallicity, therefore, provides new routes to metallic, intermetallic, and compound phases.

catalysis (homogeneous), solar (photovoltaic), bio↗

Shubnikov–de Haas Thermoelectric Field Oscillations in Layered Conductors in the Vicinity of a Topological Lifshits Transition

We have studied the response of a layered conductor with a quasi-two-dimensional electron spectrum and a multisheet Fermi surface (FS) formed by two weakly corrugated cylinders and two planar sheets adjoining these cylinders to nonuniform heating. As a result of action of pressure on the conductor or its doping with impurity atoms, distance Δ{sub p} between the FS cylinder and planar sheets can be reduced to such an extent that conduction electrons begin roaming over these sheets, tunneling from one FS sheet (cavity) to the other. If a conduction electron can visit several times all FS sheets during its mean free time, its motion in the plane orthogonal to the magnetic field becomes finite. In this case, Shubnikov–de Haas oscillations are excited with a period determined by the closed area circumscribed by the electron during its motion in the magnetic-breakdown trajectory in the momentum space. We have calculated the dependence of the thermoelectric field on the magnitude and orientation of a quite strong quantizing magnetic field. In a magnetic field normal to the layers, the cross sections of the cylindrical part of the FS are equidistant from both FS planar sheets. However, this equidistance is violated even for a small deviation of the field from the normal to the layers by angle ϑ, and, at a certain value ϑ{sub k} of this angle, the probability of magnetic breakdown to one of the FS planar sheets can be so low that the electron cannot close the magnetic-breakdown trajectory, and its motion over the other planar sheet with a visit to the FS cylindrical part becomes infinite. In this case, the magnetic-breakdown quantum oscillations of magnetization and all kinetic characteristics of the conductor disappear, and their disappearance is repeated periodically with a change in the slope of the magnetic field to the layers as a function of tanϑ.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Dynamics of Large-Amplitude Motion in Energized Molecules

Chemical reactions involve large-amplitude nuclear motion along the reaction coordinate that serves to distinguish reactants from products. Some reactions, such as roaming reactions and reactions proceeding through a loose transition state, involve more than one large-amplitude degree of freedom. Because of the limitation of exact quantum nuclear dynamics to small systems, one must, in general, define the active degrees of freedom and separate them in some way from the other degrees of freedom. In this project, we use large-amplitude motion in bound model systems to investigate the coupling of large-amplitude degrees of freedom to other nuclear degrees of freedom. This approach allows us to use the precision and power of high-resolution molecular spectroscopy to probe the specific coupling mechanisms involved, and to apply the associated theoretical tools. In addition to slit-jet spectra at the University of Akron, the current project period has involved collaboration with Michel Herman and Nathalie Vaeck of the Université Libre de Bruxelles, and with Brant Billinghurst at the Canadian Light Source (CLS).

02 PETROLEUM↗

Accelerated Quantum Simulations of Polymer Aging and Degradation

We have conducted extensive quantum simulations to predict the susceptibility of polydimethylsiloxane (PDMS) under tensile loads (i.e., stretching) to hydrolytic reactions. Initial results under uniform strain revealed that the PDMS electronic state is highly sensitive to deformations of the Si-O backbone (Figure 1). Predictions for the energy gap between the highest-occupied and lowestunoccupied molecular orbitals (i.e., the HOMO-LUMO gap, E Gap ) and visualization of these orbitals reveals the distinct possibility that strained PDMS chains have an electronically driven anisotropy in their susceptibility to hydrolysis. First, we observe that EGap begins to drop precipitously as the PDMS chain is stretched beyond 10% (labeled 1.1 in the figure). The increased accessibility of these unoccupied states generally will promote chemical degradation, as excited electronic states due to bond breaking will form more easily. Second, we observe that the geometric character of the LUMO state changes under stretching of 20% (strains of 1.20) and larger, whereby the orbital density localizes to the interior of the O-Si-O bond angles along the backbone. This LUMO localization coupled with a substantial reduction in EGap indicates that the interior O-Si-O bond angles may be potential sites for chemistry due to environmental water or by roaming acids or bases. This is in contrast to a chemical attack on the backside of the O-Si-O angle, where there is practically no density of low-energy unoccupied states. The enhanced electronic susceptibility likely couples with steric shielding by the two methyl groups that also protect the backside of the Si-O chain. These detailed results can be used as inputs for coarse-grained simulation approaches, by helping us to define the susceptibility of specific polymer chain location to scission and/or backbiting reactions, based on the local geometry of the Si-O backbone. Definition of this type of order parameter with application to larger scale models is the subject of our future work.

36 MATERIALS SCIENCE↗

Sandia NRT Blade-0 Laboratory Modal Survey

Modal testing was performed on the Sandia NRT Blade-0 in building A-60 at NREL/NWTC. Modal testing was intended to identify the fundamental frequencies of the blade. The blade was cantilevered to the A-60 test stand. Fundamental frequencies were identified using impact modal testing. Additional tests included free-decay testing to quantify damping at small displacements. Small-displacement modal testing aims to minimize the influence of aerodynamic damping; roaming accelerometer impact testing with the development of a dynamic frame model enabled visualization of mode shapes.

17 WIND ENERGY↗

Summary of Factory Fueling and Testing Risks to Support the Transformation of Regulatory Requirements for Microreactors

Microreactors have the potential to open new markets and applications for nuclear energy. New manufacturing and operational regimes, such as factory fueling and testing prior to site installation, are being proposed to meet these new markets. The radiological hazards associated with traditional commercial power reactors are not the same as the hazards of a reactor being constructed in a factory. Currently, a reactor operating license specified under 10 CFR Part 50, Part 52, or (in the near future) Part 53 is required prior to loading fuel in the reactor. This is logical for plants that are immediately to begin full-power operations soon after fuel loading. However, for microreactors, this may not be the case. Some deployment concepts may stage reactors as “ready to go” in a factory prior to site installation and startup. This approach is being considered in the case of diesel generator replacements, mobile or roaming mining operations, and emergency response situations, such as after a major disaster event. Therefore, it is necessary to evaluate hazards assuming low power operation for a short irradiation time. This report investigates the primary hazards unique to microreactors associated with low power reactor and physics tests necessary to confirm core safety assumptions, neutronic and core design performance parameters, and other assumptions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Targeted Mobile Measurements to Isolate the Impacts of Aerosols and Meteorology on Deep Convection

One of the main goals of the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Tracking Aerosol Convection Interactions Experiment (TRACER) field campaign near Houston, TX was to improve understanding of meteorology and aerosol effects on deep convective storms. To help TRACER achieve its goals of disentangling aerosol-cloud interactions from meteorology, the Texas A&M University (TAMU) team deployed the new fully mobile Rapid Onsite Atmospheric Measurement Van (ROAM-V) carrying instruments to measure aerosol and atmospheric properties that was moved to multiple locations on a deployment day of isolated convection initiated by the sea breeze.

54 ENVIRONMENTAL SCIENCES↗

ChargeX OCPI Recommendations

The Open Charge Point Interface (OCPI) is an open protocol that enables electric vehicle (EV) charging systems to work together across networks. It supports communication and data sharing between Charge Point Operators (CPOs), who manage charging stations, and e-Mobility Service Providers (eMSPs), who provide charging services to EV drivers. OCPI facilitates functions like user authorization, remote charge point control, charging session data exchange, and billing through Charge Detail Records (CDRs). This allows EV roaming, so drivers can charge at different networks without multiple accounts. As the EV market grows due to increased adoption and technological advancements, OCPI faces higher demands. This has revealed issues with CDR format consistency, timestamp standardization across regions, transmission of EV-side error codes for troubleshooting, and support for new use cases. These challenges can affect operations and user experience, particularly as the industry starts considering Vehicle-to-Grid (V2G) systems, where EVs supply energy to the grid, and Vehicle-to-Everything (V2X) technologies for broader energy interactions. Using feedback from the ChargeX Diagnostics taskforce discussions, industry 1-on-1 meetings, technical standards, and OCPI’s evolution through versions (e.g., OCPI 2.1.1, 2.2, and 2.2.1), this report identifies these issues and suggests practical recommendations. These aim to improve interoperability, streamline operations, and prepare OCPI for future trends in the EV charging ecosystem.

32 - ENERGY CONSERVATION, CONSUMPTION, AND UTILIZA↗

Implementation Aspects of Smart Grids Cyber-Security Cross-Layered Framework for Critical Infrastructure Operation

Communication networks in power systems are a major part of the smart grid paradigm. It enables and facilitates the automation of power grid operation as well as self-healing in contingencies. Such dependencies on communication networks, though, create a roam for cyber-threats. An adversary can launch an attack on the communication network, which in turn reflects on power grid operation. Attacks could be in the form of false data injection into system measurements, flooding the communication channels with unnecessary data, or intercepting messages. Using machine learning-based processing on data gathered from communication networks and the power grid is a promising solution for detecting cyber threats. In this paper, a co-simulation of cyber-security for cross-layer strategy is presented. The advantage of such a framework is the augmentation of valuable data that enhances the detection as well as identification of anomalies in the operation of the power grid. The framework is implemented on the IEEE 118-bus system. The system is constructed in Mininet to simulate a communication network and obtain data for analysis. A distributed three controller software-defined networking (SDN) framework is proposed that utilizes the Open Network Operating System (ONOS) cluster. According to the findings of our suggested architecture, it outperforms a single SDN controller framework by a factor of more than ten times the throughput. This provides for a higher flow of data throughout the network while decreasing congestion caused by a single controller’s processing restrictions. Furthermore, our CECD-AS approach outperforms state-of-the-art physics and machine learning-based techniques in terms of attack classification. The performance of the framework is investigated under various types of communication attacks.

cross-layered↗

Satellite (IRLS) tracking of elk

The practicability of tracking free roaming animals in natural environments by satellite systems is reported. Satellite systems combine continuous tracking with simultaneous monitoring of physiological and environmental parameters through a combination of radio tracking and biotelemetric ground systems that lead to a better understanding of animal behavior and migration patterns.

Buechner, H. K.↗

Mobile radio alternative systems study. Volume 2: Terrestrial

Terrestrial systems for satisfying the markets for mobile radio services in non-urban areas of the United States in the years from 185 to 2000 were investigated. Present day mobile communication technologies, systems and equipment are described for background in evaluating the concepts generated. Average propagation ranges are calculated for terrestrial installations in each of seven physiographic areas of the contiguous states to determine the number of installations that would be required for nationwide coverage. Four system concepts are defined and analyzed to determine how well terrestrial systems can fulfill the requirements at acceptable costs. Nationwide dispatch, telephone and data services would require terrestrial installations in many locations where they would be used infrequently and would not recover their investment. Access to a roaming vehicle requires that the vehicle location be known within the range limit of the terrestrial installation in which the vehicle is present at the time of the call. Access to that installation must be made through the public switched telephone network, usually involving a long-distance toll charge, and requiring costly means to track or locate the vehicle as it moved through the network of installations.

Cromwell, N.↗

Mountain building processes in the Central Andes

False color composite images of the Thematic Mapper (TM) bands 5, 4, and 2 were examined to make visual interpretations of geological features. The use of the roam mode of image display with the International Imaging Systems (IIS) System 600 image processing package running on the IIS Model 75 was very useful. Several areas in which good comparisons with ground data existed, were examined in detail. Parallel to the visual approach, image processing methods are being developed which allow the complete use of the seven TM bands. The data was organized into easily accessible files and a visual cataloging of the quads (quarter TM scenes) with preliminary registration with the best available charts for the region. The catalog has proved to be a valuable tool for the rapid scanning of quads for a specific investigation. Integration of the data into a complete approach to the problems of uplift, deformation, and magnetism in relation to the Nazca-South American plate interaction is at an initial stage.

Bloom, A. L.↗

A preliminary investigation of communication techniques for local and remote access to image databases

A software technique which allows users to examine images remotely while minimizing transmission time, is discussed. The technique provides a browsing capability, making it possible to roam over larger images, to zoom to various resolution levels, and to specify subregions of interest in the image to display at full resolution. The software permits analysts to remotely submit images for processing and to review the processing result. The capabilities of the technique under varying conditions and the speed at which imagery can be displayed over direct connect serial lines are discussed and examples of the imagery at various levels of resolution are presented.

Ma, Mathias↗