Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RHE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Propane Activation on Pt Electrodes at Room Temperature: Quantification of Adsorbate Identity and Coverage

Abstract C−H bond activation is the first step in manufacturing chemical products from readily available light alkane feedstock and typically proceeds via carbon‐intensive thermal processes. The ongoing emphasis on decarbonization via electrification motivates low‐temperature electrochemical alternatives that could lead to sustainable chemicals production. Platinum (Pt) electrocatalysts have shown activity towards reacting alkanes; however, little is known about propane electrocatalytic activation and conditions suitable for enabling selective oxidation to valuable products. Herein, we utilize a combination of electrochemical mass spectrometry (ECMS) and density functional theory (DFT) calculations to elucidate the potential dependence of propane activation on Pt electrocatalysts. Results show a strong dependence of adsorption on the applied potential in room‐temperature aqueous acidic electrolyte, with a maximum coverage of propane‐derived adsorbates at 0.30 V vs RHE. Using charge deconvolution and deuterated experiments, the mechanism of adsorption was elucidated, and C 3 H 2 * was determined as the average dehydrogenated propane‐derived adsorbate species. DFT calculations further corroborate these results, showing that the formation of deeply dehydrogenated species is energetically accessible at room temperature. The combined theoretical and experimental findings yield insights for selective activation of paraffinic C−H bonds at room temperature, aqueous conditions—a critical step towards decarbonized chemical manufacturing.

Chemistry↗
DOE OSTI2025

Circumventing Radical Generation on Fe–V Atomic Pair Catalyst for Robust Oxygen Reduction and Zinc–Air Batteries

Iron–nitrogen–carbon (Fe–N–C) catalysts are considered the most active platinum-free alternative for oxygen reduction reaction (ORR), yet the generated reactive oxygen species (ROS) from general mechanistic pathway rapidly impair the ORR activity and stability of Fe–N–C. Herein, we establish and report an ORR pathway-switching strategy to circumvent ROS generation and fundamentally improve the activity and stability of Fe–N–C via DFT guided catalyst design. The constructed Fe–V atomic pair catalyst (Fe 1 V 1 -NC) with N 2 Fe-N 2 -VN 2 configuration enables side-on adsorption of O 2 and subsequent direct-breaking of the O═O bond to form O*, thereby avoiding the formation of ROS radicals. Importantly, there is intersite electron interaction between FeN 4 and VN 4 , which further boosts the ORR activity. Consequently, Fe 1 V 1 -NC exhibits outstanding ORR activity with onset and half-wave (E 1/2 ) potentials at 1.02 and 0.89 V versus RHE, respectively, in 0.1 M KOH. Record-high stability is achieved on Fe 1 V 1 -NC with a minimal decay in E 1/2 by 16 mV over 50000 cycles, surpassing Fe–N–C counterpart and most of the catalysts reported to date. The Fe 1 V 1 -NC-based zinc-air battery reported here demonstrates exceptional durability up to 400 h at 10 mA·cm −2 . This work identifies the intrinsic correlation between ORR pathway, activity, and stability, advancing development of stable catalytic systems.

Fe-N-C↗
DOE OSTI2025

Probing Photoelectrochemical Hydrogen and Oxygen Evolution at Individual Al:SrTiO 3 /Rh 2–y Cr y O 3 Photocatalyst Particles

Particle-based photocatalysts for overall water splitting convert solar energy into hydrogen fuel without the use of any photovoltaic devices. As such they have the potential to revolutionize renewable energy production on Earth. While proven efficiencies have reached 1.1%, further improvements of photocatalyst technology depend on a better understanding of energy loss mechanisms on the individual particle level. Here, we conduct the first in operando photoelectrochemical measurements on individual micrometer-sized Al-doped SrTiO 3 /Rh 2–y CryO 3 photocatalyst particles. We find that the photocatalyst particles behave mainly as water oxidation photoanodes reaching up to 0.5 mA cm −2 at 0.8 V versus RHE and a photovoltage of ∼1.00 V under 4.7 mW cm −2 ultraviolet illumination. This proves that charge separation in the unbiased Al:SrTiO 3 /Rh 2–y Cr y O 3 catalyst is driven by a junction at the n-semiconductor-liquid contact. While O 2 is detected symmetrically around photocatalyst particles, uneven H 2 evolution profiles reflect an irregular Rh 2–y Cr y O 3 cocatalyst distribution. Additionally, the H 2 evolution activity varies significantly between different photocatalyst particles. Furthermore, this suggests that performance gains are possible by better controlling catalyst composition on the microscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Boosting the Oxygen Reduction Performance via Tuning the Synergy between Metal Core and Oxide Shell of Metal−Organic Frameworks‐Derived Co@CoO x

Abstract Co core@Co oxide shell (Co@CoO x ) catalysts represent a large family with promising oxygen reduction reaction (ORR) catalytic activity. However, inadequate understanding of Co@CoO x synergy prohibits further pursuit of catalytic performance enhancement. Herein, a Co zeolitic−imidazolate framework was converted into metallic Co, followed by controlled air treatment to form Co@CoO x . The composition and structure evolution as a function of air treatment temperature were studied thoroughly through conventional and synchrotron (both ex‐situ and in‐situ) characterizations, confirming the coexistence of CoO and Co 3 O 4 in the shell. The optimal catalyst showed an ORR half‐wave potential of 0.87 V (vs. RHE) in an alkaline half‐cell and delivered high discharge capacity in an aprotic Li−O 2 battery (7,124 mAh g Cat+C −1 ) and an aqueous Zn−air battery (694 mAh g Zn −1 ) with good performance retention after durability test. Modeling simulation and density functional theory calculation confirmed the charge donation from metal core to oxide shell and shed light on new insights of how metal@metal oxide synergy impacted the ORR via tuning the charge conductivity, oxygen affinity and intermediate transfer pathway. This work opens up a venue to boost ORR catalytic activity from an interfacial synergy perspective.

Wang, Hao↗
DOE OSTI2023

Mesoporous CuFe 2 O 4 Photoanodes for Solar Water Oxidation: Impact of Surface Morphology on the Photoelectrochemical Properties**

Abstract Metal oxide‐based photoelectrodes for solar water splitting often utilize nanostructures to increase the solid‐liquid interface area. This reduces charge transport distances and increases the photocurrent for materials with short minority charge carrier diffusion lengths. While the merits of nanostructuring are well established, the effect of surface order on the photocurrent and carrier recombination has not yet received much attention in the literature. To evaluate the impact of pore ordering on the photoelectrochemical properties, mesoporous CuFe 2 O 4 (CFO) thin film photoanodes were prepared by dip‐coating and soft‐templating. Here, the pore order and geometry can be controlled by addition of copolymer surfactants poly(ethylene oxide)‐ block ‐poly(propylene oxide)‐ block ‐poly(ethylene oxide) (Pluronic® F‐127), polyisobutylene‐ block ‐poly(ethylene oxide) (PIB‐PEO) and poly(ethylene‐ co ‐butylene)‐ block ‐poly(ethylene oxide) (Kraton liquid™‐PEO, KLE). The non‐ordered CFO showed the highest photocurrent density of 0.2 mA/cm 2 at 1.3 V vs. RHE for sulfite oxidation, but the least photocurrent density for water oxidation. Conversely, the ordered CFO presented the best photoelectrochemical water oxidation performance. These differences can be understood on the basis of the high surface area, which promotes hole transfer to sulfite (a fast hole acceptor), but retards oxidation of water (a slow hole acceptor) due to electron‐hole recombination at the defective surface. This interpretation is confirmed by intensity‐modulated photocurrent (IMPS) and vibrating Kelvin probe surface photovoltage spectroscopy (VKP‐SPS). The lowest surface recombination rate was observed for the ordered KLE‐based mesoporous CFO, which retains spherical pore shapes at the surface resulting in fewer surface defects. Overall, this work shows that the photoelectrochemical energy conversion efficiency of copper ferrite thin films is not just controlled by the surface area, but also by surface order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Controlling Nb(IV) Defects in SrNbO 2 N Oxygen Evolution Photocatalyst by Ammonolysis With Dinitrogen–Ammonia Mixtures

Strontium niobium oxynitride (SrNbO 2 N) is a promising, corrosion resistant semiconductor for the visible light-driven water splitting reaction, a non-photovoltaic pathway to green hydrogen fuel. However, SrNbO 2 N materials made by ammonolysis usually contain Nb 4+ defect states that cause electron–hole recombination. Here, in this work, we demonstrate that such defects can be minimized by synthesizing SrNbO 2 N from metal oxides in a mixed 13%:87% (vol) NH 3 /N 2 atmosphere. According to electron paramagnetic resonance (EPR), SrNbO 2 N made in pure NH 3 contains paramagnetic impurities with g = 2.002 and 2.195, which can be assigned to lattice and surface Nb 4+ defects. These states also cause broad optical absorptions centered at 800 and 1020 nm, respectively, and the lattice defect produces a 1.55–1.63 eV signal in surface photovoltage spectra. The improved SrNbO 2 N contains five times fewer lattice Nb 4+ defects (8.95 × 10 15 cm −3 ), based on the integrated EPR signal intensity, and supports a water oxidation photocurrent of 1.07 mA cm −2 at 1.23 V versus RHE under simulated sunlight and an apparent quantum efficiency of 5.1% at 400 nm during photocatalytic oxygen evolution. Based on earlier results with LaTiO 2 N and BaTaO 2 N, dilution of NH 3 during synthesis appears generally beneficial to transition metal oxynitrides.

electron paramagnetic resonance↗
DOE OSTI2026

Sustainable Synthesis of NiMo Alloy Nanoparticles for Hydrogen Evolution Catalysis Using a Recyclable Ionic Liquid Solvent

Advancing the sustainability of nanoparticle electrocatalyst synthesis requires reducing solvent waste without compromising catalytic performance. Here, we report a rapid, microwave‐assisted colloidal synthesis of NiMo alloy nanoparticles in the ionic liquid 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM‐NTf 2 ), which serves as both reaction medium and recyclable solvent. NiMo nanoparticles with tunable compositions were obtained within 1 min at 230 °C, with Ni 0.86 Mo 0.14 giving the highest activity toward the hydrogen evolution reaction (HER), achieving an onset potential of −129 mV, an overpotential at 10 mA cm −2 of −290 mV versus RHE in acidic electrolyte, and >99% Faradaic efficiency. The ionic liquid was recovered and purified via aqueous NH 4 OH extraction, removing over 99% of residual Mo species, and reused for up to five successive syntheses. Nanoparticles prepared in recycled BMIM‐NTf 2 retained comparable crystallinity, morphology, and catalytic activity, with stable HER performance over 45 h of electrolysis. These results demonstrate that ionic liquid recycling can improve the sustainability of the preparation of NiMo nanoparticle electrocatalysts while preserving performance and material integrity.

bimetallic alloy↗
DOE OSTI2022

Atomic Molybdenum for Synthesis of Ammonia with 50% Faradic Efficiency

The electrochemical dinitrogen (N 2 ) reduction reaction (NRR) under ambient conditions has gained significant interest as an environmentally friendly alternative to the traditional Haber–Bosch process for the synthesis of ammonia (NH 3 ). However, up to now, most of the reported NRR electrocatalysts with satisfactory catalytic activities have been hindered by the large overpotential in N 2 activation. The preparation of highly efficient Mo-based NRR electrocatalyst in acidic electrolytes under ambient conditions is demonstrated here, consisting of stabilized single Mo atoms anchored on holey nitrogen-doped graphene synthesized through a convenient potassium-salt-assisted activation method. At -0.05 V versus a reversible hydrogen electrode (RHE), an electrode consisting of the resultant electrocatalyst immobilized on carbon fiber paper can attain an exceptional Faradaic efficiency of 50.2% and a NH3 yield rate of 3.6 µg h -1 mg cat -1 with low overpotentials. Density functional theory calculations further unveil that compared to the original graphene without holes, the edge coordinated Mo atoms and the existence of vacancies on holey graphene lower the overpotential of N 2 reduction, thereby promoting the NRR catalytic activity. Finally, this work could provide new guidelines for future designs in single-atom catalysis that would be beneficial to ambient N 2 fixation, and replacement of classical synthesis processes that are very energy-intensive.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Activating Single‐Atom Ni Site via First‐Shell Si Modulation Boosts Oxygen Reduction Reaction

Abstract Atomically dispersed nitrogen‐coordinated 3d transition‐metal site on carbon support (M‐NC) are promising alternatives to Pt group metal‐based catalysts toward oxygen reduction reaction (ORR). However, despite the excellent activities of most of M‐NC catalysts, such as Fe‐NC, Co‐NC et al., their durability is far from satisfactory due to Fenton reaction. Herein, this work reports a novel Si‐doped Ni‐NC catalyst (Ni‐SiNC) that possesses high activity and excellent stability. X‐ray absorption fine structure and aberration‐corrected transmission electron microscopy uncover that the single‐atom Ni site is coordinated with one Si atom and three N atoms, constructing Ni‐Si 1 N 3 moiety. The Ni‐SiNC catalyst exhibits a half‐wave potential (E 1/2 ) of 0.866 V versus RHE, with a distinguished long‐term durability in alkaline media of only 10 mV negative shift in E 1/2 after 35 000 cycles, which is also validated in Zn‐air battery. Density functional theory calculations reveal that the Ni‐Si 1 N 3 moiety facilitates ORR kinetics through optimizing the adsorption of intermediates.

Chemistry↗
DOE OSTI2025

Optimizing Hybrid-Phase IrO2 Catalysts with Ti for Enhanced Oxygen Evolution Reaction for Proton Exchange Membrane Water Electrolysis

To realize a sustainable energy transition, water electrolysis-particularly proton exchange membrane water electrolysis (PEMWE)-holds significant promise. However, practical deployment is hindered by the cost and instability of the anode catalyst, IrO2. Recent studies indicate that tuning the Ir-O bond distance, via doping or composite formation, is key to enhancing the oxygen evolution reaction (OER) performance of IrO2-based electrocatalysts. Herein, a hybrid-phase Ti-incorporated IrO2 electrocatalyst is developed, exhibiting outstanding OER activity (298.8 mV at 100 mA cm-2) and stability over 25 h. This improvement originates from asymmetric interatomic interactions introduced by Ti, as revealed by combined experimental X-ray analyses and theoretical modeling. Ti incorporation induces tensile strain along the z-axis in IrO2 motifs, effectively reducing the average Ir-O bond distance and thereby enhancing OER activity. In situ X-ray absorption spectroscopy further confirms that at 1.5 V (vs. RHE), the elongated Ir-O bond facilitates -OOH* intermediate formation while suppressing Ir dissolution, contributing to superior stability. These findings underscore the critical role of Ir-O bond engineering in balancing activity and durability, offering strategic insights for the rational design of high-performance OER catalysts for renewable energy technologies.

08 HYDROGEN↗
DOE OSTI2020

A comparative study of thermal- and electrocatalytic conversion of furfural: methylfuran as a primary and major product

Controlling reaction selectivity represents a fundamental challenge in heterogeneous catalysis. Here, we compare the selectivity in aqueous-phase thermal catalytic and electrocatalytic conversion of furfural and report the fundamental difference in elementary steps in the two reaction systems. Specifically, we observed that furfural alcohol and 2-methylfuran, which is the hydrogenation and hydrogenolysis product of furfural, respectively, are both primary products in electrocatalysis over a Cu electrode, with 2-methylfuran dominating the product distribution under electrode potentials between -0.55 and -0.75 V versus RHE. By contrast, in an aqueous-phase thermal reaction using a SiO 2 -supported Cu catalyst, furfural alcohol and its derivatives from the ring-rearrangement reaction are the major products, without production of 2-methylfuran, at the reaction temperature between 140 and 200 °C. Here, we propose that the distinct selectivity trends for oxygenate conversion via thermal and electrocatalytic reduction result from the distinct sequence of proton attack to the aldehyde group and may be generally true for reduction reactions of other biomass-derived oxygenates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

MOF-Transformed In 2 O 3-x @C Nanocorn Electrocatalyst for Efficient CO 2 Reduction to HCOOH

For electrochemical CO 2 reduction to HCOOH, an ongoing challenge is to design energy efficient electrocatalysts that can deliver a high HCOOH current density (J HCOOH ) at a low overpotential. Indium oxide is good HCOOH production catalyst but with low conductivity. In this work, we report a unique corn design of In 2 O 3-x @C nanocatalyst, wherein In 2 O 3-x nanocube as the fine grains dispersed uniformly on the carbon nanorod cob, resulting in the enhanced conductivity. Excellent performance is achieved with 84% Faradaic efficiency (FE) and 11 mA cm –2 J HCOOH at a low potential of – 0.4 V versus RHE. At the current density of 100 mA cm –2 , the applied potential remained stable for more than 120 h with the FE above 90%. Density functional theory calculations reveal that the abundant oxygen vacancy in In 2 O 3-x has exposed more In 3+ sites with activated electroactivity, which facilitates the formation of HCOO* intermediate. Operando X-ray absorption spectroscopy also confirms In 3+ as the active site and the key intermediate of HCOO* during the process of CO 2 reduction to HCOOH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhancing glycerol electrooxidation from synergistic interactions of platinum and transition metal carbides

To effectively utilize glycerol as a fuel for electrochemical fuel cells, it is necessary to optimize catalysts for effective C-C bond cleavage and complete oxidation of reaction intermediates to achieve maximum efficiency. Here, the current work showed that the synergistic interactions of platinum (Pt) with transition metal carbide (TMC) substrates, such as tungsten carbide (WC) and tantalum carbide (TaC), fulfilled these criteria. The TMC-supported Pt catalysts showed higher activity and selectivity for complete glycerol oxidation than commercial 10 wt% Pt/C. In-situ FTIR analysis revealed that 5 wt% Pt/WC was the most effective catalyst among those tested for complete glycerol oxidation at 0.9 V vs RHE. In-situ X-ray absorption fine structure characterization and density functional theory calculations provided additional insight into the synergistic interactions for glycerol oxidation over Pt/TMC catalysts.

25 ENERGY STORAGE↗
DOE OSTI2022

Robust palladium hydride catalyst for electrocatalytic formate formation with high CO tolerance

Palladium is unique in the electrocatalytic reduction of CO 2 to formate because of its low or even near-equilibrium onset potential. However, the inevitably produced CO molecules poison and deactivate the catalyst surface, resulting in an insufficient operating lifetime (<30 min) for conventional and optimized Pd catalysts. In this work, we present a hydrogen-rich Palladium hydride catalyst (PdH0.5/C) derived from a one-step solvothermal synthesis. This catalyst showed a 93.1 % faradaic efficiency towards formate at – 0.4 V (vs RHE). The working lifetime reached a record of 4 h, which was ~15 times longer than a commercial Pd catalyst and outperformed all previous Pd-based electrocatalysts for CO 2 -HCOO – conversion. The high CO tolerance was attributed to the selectivity improvement induced by lattice hydrogen and the weak CO adsorption strength on diverse active sites (i.e. kink, step, and terrace). Isotopic analysis revealed a direct participation of the lattice hydrogen in the protonation of CO 2 molecules in formate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Efficient electrocatalytic conversion of CO 2 to ethanol enabled by imidazolium-functionalized ionomer confined molybdenum phosphide

An effective electrochemical carbon dioxide reduction reaction (eCO 2 RR) requires the discovery of a catalytic system that is highly active and selective for multi-carbon products together with superior CO 2 diffusion at a catalyst layer to minimize the reduction barriers. Here, we found a catalytic system that uses molybdenum phosphide (MoP) nanoparticles covered by imidazolium-functionalized ionomer (Im) that promotes CO 2 diffusion at the catalyst layer toward the catalyst surface, where CO 2 is reduced to ethanol (C 2 H 5 OH). The electrochemical results with the MoP-Im co-catalyst show a C 2 H 5 OH production Faradaic efficiency and a cathodic energy efficiency of 77.4% and 63.3%, respectively, at a potential as low as - 200 mV vs. RHE. The electrochemical experiments along with our physicochemical characterizations indicate that the Im improves CO 2 diffusion and balances water content resulting in a higher CO 2 -to-water ratio at the catalyst layer and fine-tunes the electronic properties of Mo atoms at the MoP surface. Finally, in-situ Raman spectroscopy reveals that a high number of adsorbed *CO intermediates on the surface and a higher binding strength of *CO intermediates on the Mo surface sites in the presence of imidazolium molecules are the main reasons for a superior C-C coupling and thereby the improved C 2 H 5 OH formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrosynthesis of high purity ethylene using high-index facet Cu 2 O nanocrystals electrocatalyst

Electrochemical CO 2 reduction reaction (eCO2RR) to multi-carbon (C 2+ ) products with copper-based catalysts is often limited by poor selectivity. This challenge arises from the concurrent formation of various intermediates, dictated by the atomic arrangement and electronic properties of surface atoms. In this study, we found that copper (I) oxide (Cu 2 O) nanocrystals with 50 facets (50F-NC), predominantly featuring (211) facets that offers high density of under-coordinated sites, demonstrate superior ethylene (C 2 H 4 ) selectivity of 92% ± 2 with an overall current density of 212 mA/cm 2 at -650 mV vs RHE. Furthermore, after one month of storage in a 1 M KOH electrolyte, this catalyst demonstrated a C 2 H 4 Faradaic efficiency of 87% highlighting its stabile structure under strong alkaline environments. Here, operando electrochemical Raman spectroscopy revealed enhanced CO* intermediate coverage on the 50F-NC catalyst, correlating with improved C-C coupling. SEM, TEM, and XPS analyses, along with DFT calculations, suggested that Cu sites on the (211) facet of 50F-NC and those at the Cu/Cu 2 O interface formed in-situ due to the surface reconstruction during the reaction, are likely active sites for effective C-C coupling and sustained high-rate C 2 H 4 production.

Cu nano particle↗
DOE OSTI2020

Alternative route for electrochemical ammonia synthesis by reduction of nitrate on copper nanosheets

We propose an efficient and clean avenue for ammonia synthesis, via electroreduction of nitrate which could be obtained from industrial wastewater, domestic sewage, sodium nitrate ore, and nitrification of bacteria and electrochemical oxidation of nitrogen, which addresses the water pollution issues and simultaneously upgrades the nitrate to high-value ammonia. At a low overpotential of -0.15 V versus RHE, Cu nanosheets achieved an ammonia formation rate of 390.1 μg mg -1 Cu h -1 and a Faradaic efficiency of 99.7%, attributed to suppression of the HER activity and apparent improvement of the rate of rate-determining step on Cu (111). Such an ammonia formation rate is more than two orders of magnitude higher than electrochemical nitrogen reduction reaction to ammonia. This work not only develops a powerful strategy to the rational design of robust and efficient catalysts by crystal facet engineering, but also provides an alternative route for electrochemical ammonia synthesis by reduction of nitrate.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cu-induced robust Ni 2+ /Ni 3+ transition on amorphous Ni hydroxide-based electrocatalysts for advancing electrochemical ammonia oxidation and hydrogen evolution

The electrochemical ammonia oxidation reaction (AOR) is a promising anodic reaction for hydrogen production, offering a lower theoretical potential compared to oxygen evolution reaction. Despite this thermodynamic advantage, AOR suffers from sluggish multi-electron transfer reaction kinetics and the regeneration of catalytically active Ni 3+ species, which limits both activity and durability. In this study, amorphous NiCu bimetallic catalysts were prepared via facile precipitating metal nitrate deposition (PMND) method. The addition of Cu induces a robust Ni 2+ /Ni 3+ transition, stabilizing catalytically active Ni 3+ species and modulating the electronic structure of Ni. It alters the oxidation and desorption behavior of nitrogen-containing intermediates and facilitating their conversions to NO x species, resulting in fast active site regeneration. Furthermore, amorphous structure provides abundant dangling bonds, which enhances the intrinsic reactivity and accessibility of active sites rather than increasing the number of active sites. As a result, these effects accelerate the overall reaction kinetics. The optimized NiCu 5:1 catalyst achieved an ammonia removal efficiency of ∼100 % and a hydrogen production rate of 2.45 mmol/(h∙cm 2 ) at 1.6 V RHE .

Amorphous electrocatalyst↗