Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RESONANCE EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Quantized spin waves in single Co/Pt dots detected by anomalous Hall effect based ferromagnetic resonance

Anomalous Hall effect (AHE) based ferromagnetic resonance (FMR) measurements were carried out on perpendicularly magnetized Co/Pt multilayer single dots of 0.4–3 μm in diameter. The resonance behavior was measured by detecting the decrease of perpendicular magnetization component due to magnetization precession. Resonance behavior was observed as a clear decrease of Hall voltages, and the obtained resonance fields were consistent with the results of vector-network-analyzer FMR. Spin-waves with cylindrical symmetry became significant by decreasing the dot diameter, and quantized multiple resonances were observed in the dot of 0.4 μm in diameter. The AHE based FMR proposed here is a powerful method to approach magnetization dynamics including spin waves and non-linear behavior excited in a finite nanostructure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiple Spin Resonance Crossing in Accelerators

In this paper the method of beam depolarization compensation during spin resonance crossing is developed. This method is based on the restoration of the spin adiabatic invariant after the spin resonance crossing. The case when the restoration of spin adiabatic invariant occurs due to multiple crossing of the resonance effective area is considered. At the same time it is necessary to provide the certain difference of spin phases between the moments of crossing of the resonance effective area. The conditions of beam polarization preservation when the resonance effective area is repeatedly crossed are obtained. Numerical examples are presented.

43 PARTICLE ACCELERATORS↗

Several levels of theory for description of isotope effects in ozone: Effect of resonance lifetimes and channel couplings

In this study, two levels of theory are developed to determine the role of scattering resonances in the process of ozone formation. At the lower theory level, we compute resonance lifetimes in the simplest possible way, by neglecting all couplings between the diabatic vibrational channels in the problem. This permits to determine the effect of “shape” resonances, trapped behind the centrifugal barrier and populated by quantum tunneling. At the next level of theory, we include couplings between the vibrational channels, which permits to determine the role of Feshbach resonances and interaction of different reaction pathways on the global PES of ozone. Pure shape resonances are found to contribute little to the overall recombination process since they occur rather infrequently in the spectrum, in the vicinity of the top of the centrifugal barrier only. Moreover, the associated isotope effects are found to disagree with experimental data. By contrast, Feshbach-type resonances are found to make dominant contribution to the process. They occur in a broader range of spectrum, and their density of states is much higher. The properties of Feshbach resonances are studied in detail. They explain the isotopic ζ-effect, giving theoretical prediction in good agreement with experiments for both singly and doubly substituted ozone molecules. Importantly, Feshbach resonances also contribute to the isotopic η-effect, moving theoretical predictions in the right direction. Some differences with experimental data remain, which indicates that there may be another additional source of the η-effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-linear resonance in relativistic preheating

Inflation in the early Universe can be followed by a brief period of preheating, resulting in rapid and non-equilibrium particle production through the dynamics of parametric resonance. However, the parametric resonance effect is very sensitive to the linearity of the reheating sector. Additional self-interactions in the reheating sector, such as non-canonical kinetic terms like the DBI Lagrangian, may enhance or frustrate the parametric resonance effect of preheating. In the case of a DBI reheating sector, preheating is described by parametric resonance of a damped relativistic harmonic oscillator. In this paper, we illustrate how the non-linear terms in the relativistic oscillator shut down the parametric resonance effect. This limits the effectiveness of preheating when there are non-linear self-interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Resonator Axis Skew on Normal Incidence Impedance

High by-pass turbofan engines have fewer fan blades and lower rotation speeds than their predecessors. Consequently, the noise suppression at the low frequency end of the noise spectra has become an increasing concern. This has led to a renewed emphasis on improving noise suppression efficiency of passive, duct liner treatments at the lower frequencies. For a variety of reasons, passive liners are comprised of locally-reacting, resonant absorbers. One reason for this design choice is to satisfy operational and economic requirements. The simplest liner design consists of a single layer of honeycomb core sandwiched between a porous facesheet and an impervious backing plate. These resonant absorbing structures are integrated into the nacelle wall and are very ef- ficient over a limited bandwidth centered on their resonance frequency. Increased noise suppression bandwidth and greater suppression at lower frequencies is typically achieved for conventional liners by increasing the liner depth and incorporating thin porous septa into the honeycomb core. However, constraints on liner depth in modern high by-pass engine nacelles severely limit the suppression bandwidth extension to lower frequencies. Also, current honeycomb core liners may not be suitable for irregular geometric volumes heretofore not considered. It is of interest, therefore, to find ways to circumvent liner depth restrictions and resonator cavity shape constraints. One way to increase effective liner depth is to skew the honeycomb core axis relative to the porous facesheet surface. Other possibilities are to alter resonator cavity shape, e.g. high aspect ratio, narrow channels that possibly include right angle bends, 180. channel fold-backs, and splayed channel walls to conform to irregular geometric constraints. These possibilities constitute the practical motivation for expanding impedance modeling capability to include unconventional resonator orientations and shapes. The work reported in this paper is in the nature of a progress report and is limited to examining the implications of resonator axis skew on the composite normal incidence impedance of an array of resonator channels. Specifically, experimental results are compared with a modified impedance prediction model for highaspect- ratio, rectangular, resonator channels with varying amounts of skew relative to the incident particle velocity. It is shown that for resonator channel widths of 1 to 2 mm, aspect ratios of 25 to 50, and skew angles of zero to sixty degrees, the surface impedance of test models can be predicted with good accuracy. Predicted resistances and reactances are particularly well correlated through the first resonance and first anti-resonance for all six test models investigated. Beyond the first anti-resonance, the impedance prediction model loses the ability to predict details of resistance and reactance but still predicts the mean trends very well.

Parrott, Tony L.↗

Surface effect on resonant properties of nanowires predicted by an elastic theory for nanomaterials

A recently developed continuum theory considering surface effect in nanomaterials is adopted to investigate the resonant properties of nanowires with different boundary conditions in the present paper. The main feature of the adopted theory is that the surface effect in nanomaterials is characterized by the surface energy density of the corresponding bulk materials and the surface relaxation parameter in nanoscale. Based on a fixed-fixed beam model and a cantilever one, the governing equation of resonant frequency for corresponding nanowires is obtained. Numerical calculation of the fundamental resonant frequency is carried out, the result of which is well consistent with the existing numerical ones. Comparing to the result predicted by the conventionally structural dynamics, the resonant frequency of a fixed-fixed nanowire is improved, while that of a cantilever nanowire is weakened due to the surface effect. Both a decreasing characteristic size (height or diameter) and an increasing aspect ratio could further enhance the varying trend of resonant properties for both kinds of nanowires. The present result should be helpful for the design of nano-devices and nanostructures related to nanowires.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancement of the transverse magneto-optical Kerr effect via resonant tunneling in trilayers containing magneto-optical metals

We propose a way to enhance the transverse magneto-optical Kerr effect, by the excitation of resonant tunneling modes, in subwavelength trilayer structures featuring a dielectric slab sandwiched between two magneto-optical metallic layers. Depending on the magneto-optical layer widths, the proposed system may exhibit an extraordinary transverse magneto-optical Kerr effect, which makes it very attractive for the design and engineering of thin-film magneto-optical-based devices for future photonic circuits or fiber optical-communication systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band structure effects on resonant tunneling in III-V quantum wells versus two-dimensional vertical heterostructures

Since the invention of the Esaki diode, resonant tunneling devices have been of interest for applications including multi-valued logic and communication systems. These devices are characterized by the presence of negative differential resistance in the current-voltage characteristic, resulting from lateral momentum conservation during the tunneling process. While a large amount of research has focused on III-V material systems, such as the GaAs/AlGaAs system, for resonant tunneling devices, poor device performance and device-to-device variability have limited widespread adoption. Recently, the symmetric field-effect transistor (symFET) was proposed as a resonant tunneling device incorporating symmetric 2-D materials, such as transition metal dichalcogenides (TMDs), separated by an interlayer barrier, such as hexagonal boron-nitride. The achievable peak-to-valley ratio for TMD symFETs has been predicted to be higher than has been observed for III-V resonant tunneling devices. This work examines the effect that band structure differences between III-V devices and TMDs has on device performance. It is shown that tunneling between the quantized subbands in III-V devices increases the valley current and decreases device performance, while the interlayer barrier height has a negligible impact on performance for barrier heights greater than approximately 0.5 eV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Partially coherent scattering in stellar chromospheres. I - Effects on resonance line thermalization

The conditions necessary for partially coherent scattering to influence the thermalization depth are investigated, and the effects of partial redistribution in homogeneous slab atmospheres are approximated using several common resonance lines as examples. For electron densities above 10 exp 10/cu cm, it is concluded that even when coherent scattering dominates the escape process, the thermalization depths of the strongest resonance lines of H, Ca II, and Mg II agree roughly with the Doppler diffusion in frequency. No elastic scattering effects on the thermalization of Mg II h and k and Ca II H and K are found. At lower densities, such as for giant star chromospheres and QSO models, the results deviate strongly from the Doppler complete redistribution case.

Gayley, Kenneth G.↗

Deciphering helix assembly in the heliconical nematic phase via tender resonant X-ray scattering

Being a link between a uniaxial nematic and a chiral nematic, the twist bend nematic (N TB ) has been an intriguing topic for research over the last decade as a key to understanding chirality generation. Accurate description and understanding of resonance effects in helical structures provide crucial knowledge on the phase behavior beyond positional ordering. We examined the manifestation of resonance effects in N TB via tender resonant X-ray scattering (TReXS) at the sulfur K-edge. For the first time we demonstrate quantitatively that the energy dependence of the scattering peak in the N TB phase follows the energy dependence of the complex refractive indices measured by X-ray absorption. Furthermore, taking advantage of molecular energy calculation, we decipher the distinct helical pitch variation trend for symmetric/asymmetric dimers from the perspective of hybridization and reveal the strong effect of substituting oxygen for sulfur atoms on the helical pitch and the thermal helix extension.

36 MATERIALS SCIENCE↗

Photoionization microscopy of the lithium atom: Wave-function imaging of quasibound and continuum Stark states

Photoionization of an atom in the presence of a uniform static electric field provides the unique opportunity to expand and visualize the atomic wave function at a macroscopic scale. In a number of seminal publications dating back to the 1980s, Fabrikant, Demkov, Kondratovich, and Ostrovsky showed that this goal could be achieved by projecting slow (meV) photoionized electrons onto a position-sensitive detector and underlined the distinction between continuum and resonant contributions. Here, the uncovering of resonant signatures was achieved fairly recently in experiments on the nonhydrogenic lithium atoms [Cohen et al., Phys. Rev. Lett. 110, 183001 (2013)]. The purpose of the present article is the general description of these findings, with emphasis on the various manifestations of resonant character. From this point of view, lithium has been chosen as an illustrative example between the two limiting cases of hydrogen, where resonance effects are more easily identified, and heavy atoms like xenon, where resonant effects were not observed.

74 ATOMIC AND MOLECULAR PHYSICS↗

A phononic crystal strip based on silicon for support tether applications in silicon-based MEMS resonators and effects of temperature and dopant on its band gap characteristics

Phononic crystals (PnCs) and n-type doped silicon technique have been widely employed in silicon-based MEMS resonators to obtain high quality factor (Q) as well as temperature-induced frequency stability. For the PnCs, their band gaps play an important role in the acoustic wave propagation. Also, the temperature and dopant doped into silicon can cause the change in its material properties such as elastic constants, Young’s modulus. Therefore, in order to design the simultaneous high Q and frequency stability silicon-based MEMS resonators by two these techniques, a careful design should study effects of temperature and dopant on the band gap characteristics to examine the acoustic wave propagation in the PnC. Based on these, this paper presents (1) a proposed silicon-based PnC strip structure for support tether applications in low frequency silicon-based MEMS resonators, (2) influences of temperature and dopant on band gap characteristics of the PnC strips. The simulation results show that the largest band gap can achieve up to 33.56 at 57.59 MHz and increase 1280.13 % (also increase 131.89 % for ratio of the widest gaps) compared with the counterpart without hole. The band gap properties of the PnC strips is insignificantly effected by temperature and electron doping concentration. Also, the quality factor of two designed length extensional mode MEMS resonators with proposed PnC strip based support tethers is up to 1084.59% and 43846.36% over the same resonators with PnC strip without hole and circled corners, respectively. This theoretical study uses the finite element analysis in COMSOL Multiphysics and MATLAB softwares as simulation tools. This findings provides a background in combination of PnC and dopant techniques for high performance silicon-based MEMS resonators as well as PnC-based MEMS devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct Comparison of the X-Ray Emission and Absorption of Cerium Oxide

Bremstrahlung Isochromat Spectroscopy (BIS). The XES spectra were collected using a Specs electron gun for the excitation and the XES 350 grating monochromator and channel plate system from Scienta as the photon detection. Spectra were collected in 'normal mode,' where the electron gun kinetic energy (KE) and the energy position of the center of the channel plate were both fixed and the energy distribution in the photon (hv) spectrum was derived from the intensities distributed across the channel plate detector in the energy dispersal direction. The polycrystalline Ce sample was oxidized by exposure to air at ambient pressures. After introduction to the ultra-high vacuum system, the oxidized sample was bombarded with Ar, to clean the topmost surface region and stabilize the surface and near surface regions. Although CeO{sub 2} would be the thermodynamically preferred composition in an oxygen rich environment, the combination of a vacuum environment and ion etching may have driven the near surface region into a Ce{sub 2}O{sub 3} stoichiometry. XES data collection occurred with the sample at or near room temperature. The base pressure of the system was 3 x 10{sup -10} torr, but the pressure changed depending the energy and current of the electron gun. For example, with the XES measurements at KE = 3KeV, the pressure was approximately 8 to 9 x 10{sup -10} torr and the excitation current to the sample was typically 0.01 mA. More detail of the sample preparation and analysis can be found in Reference 1. The XAS experiments were performed at Beamline 8 of the Advance Light Source, as part of a larger collaboration. The ex situ sample used at the ALS was prepared in a fashion similar to that described above. X-ray Emission Spectroscopy (XES) and X-ray Absorption Spectroscopy (XAS), have been used to investigate the photon emission and absorption associated with the Ce3d{sub 5/2} and Ce3d{sub 3/2} core-levels in CeOxide. A comparison of the two processes and their spectra will be made. Recently, we reported the observation of a very strong resonant effect in the Resonant Inverse Photoelectron Spectroscopy of CeOxide. It has now become apparent that there is a utility in a direct comparison of the X-ray Emission Spectroscopy (XES) and X-ray Absorption Spectroscopy (XAS) of similarly prepared CeOxide samples. That comparison is made in this Brief Report/Comment.

36 MATERIALS SCIENCE↗

Oscillatory features in the curvature power spectrum after a sudden turn of the inflationary trajectory

In the context of two-field inflation characterized by a light direction and a heavy direction, we revisit the question of the impact of the massive modes on the power spectrum produced after a turn in the inflationary trajectory. We consider in particular the resonant effect due to the background oscillations following a sharp turn. Working in the mass basis, i.e. in the basis spanned by the eigenvectors of the effective mass matrix for the perturbations, we provide an analytical estimate of the resonant effect, using the in-in formalism. In comparison with earlier estimates, we find the same the spectral dependence but a smaller amplitude. We also compute, again via the in-in formalism, the effect of the direct coupling between the light and heavy modes at the instant of the turn and confirm our previous results obtained via a different method.

79 ASTRONOMY AND ASTROPHYSICS↗

Polaritonic Bright and Dark States Collectively Affect the Reactivity of a Hydrolysis Reaction

Vibrational strong coupling (VSC) has emerged as a means for modifying chemical reactivity. Despite the intriguing discoveries and progresses in the field, the precise mechanisms that govern polaritonic chemistry still deserve further interrogation. Herein, we use the hydrolysis of ammonia borane in D 2 O as an exemplary reaction and systematically investigate the influence of VSC on its reactivity. Experimental evidence of the coexistence of a resonant effect and reaction acceleration is observed in this system. In particular, we find that when the O-D stretching mode of D 2 O is strongly coupled to a cavity mode, reaction acceleration is observed. The reaction rate acceleration factor, mu, is consistently observed to be dependent on the coupling conditions between the vibrational and cavity modes, and reaches a minimum at zero mode detuning, suggesting that a resonant effect is likely in play. In addition, we find that mu decreases with an increasing Rabi splitting. Based on these experimental findings, we propose that the overall influence of VSC on this reaction is likely determined collectively by the polaritonic bright and dark states. In conclusion, these findings could help shed new light on the intricate effects of VSC on ground-state reaction landscapes.

Rabi splitting↗