Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REMOTE AREAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Automatic control of a helicopter with a hanging load

An autopilot logic is designed here for controlling a helicopter with a hanging load. A 16th order model for the system is decoupled into four subsystems: (1) a second order system for yawing motion, (2) a second order system for vertical motion, (3) a sixth order system for longitudinal motion, and (4) a sixth order system for lateral motion. A measuring scheme, which could be used in remote areas, is developed and filters are designed to estimate the state variables from these measurements. The autopilot can be used to move the load over short distances without retracting the cables. This is done by automatically shifting the autopilot modes from position-hold (hover) to acceleration-hold to velocity-hold (cruise) to deceleration-hold to velocity-hold (near hover) to position-hold (hover). Use of such an autopilot might save considerable turnaround time. The Sikorsky S-61 helicopter is chosen as an example vehicle. The performance of the controlled system is studied in the presence of longitudinal and lateral winds.

Gupta, N. K.↗
NASA NTRS1973

Economic considerations of utilizing small wind generators

The economic feasibility of small wind generators is compared to that of solar cells, primary batteries, thermoelectric generators, and engine generators. It is shown that small wind generator plants offer an attractive alternative to primary battery systems and constantly running engines to generate power in remote areas. The limitation is an annual average wind velocity of at least 9 to 10 mph. Presently available units are most useful in the average load range of 10 to 1000 watts.

Dodge, R.↗
NASA NTRS1974

New space technology advances knowledge of the remote polar regions

The application of ERTS-1 imagery is rapidly increasing man's knowledge of polar regions. Products compiled from this imagery at scales of 1:250,000, 1:500,000 and 1:1,000,000 are already providing valuable information to earth scientists working in Antarctica. Significant finds detected by these bench mark products were glaciological changes, advancement in ice fronts, discovery of new geographic features, and the repositioning of nunataks, islands, and ice tongues. Tests conducted in Antarctica have proven the feasibility of tracking Navy navigation satellites to establish ground control for positioning ERTS-1 imagery in remote areas. ERTS imagery coupled with satellite geodesy shows great promise and may prove to be the most practical and cost effective way to meet the small-scale cartographic requirements of the polar science community.

Macdonald, W. R.↗
NASA NTRS1974

Water survey of Canada: Application for use of ERTS-A for retransmission of water resources data

The author has identified the following significant results. The fact that water resources data can be retransmitted from remote areas of Canada by polar orbiting spacecraft to users in population centers on a near real time basis reliably, accurately, and at relative low cost continues to be demonstrated. Over 60,000 transmissions from the nine data collection platforms installed at Water Survey of Canada gauging stations have been received. The stage and ice-out data retransmitted via ERTS-1 have been plotted on a chart record produced by a water stage servo-manometer installed on the Albany River. The stage increased smoothly until shortly after noon on May 19, 1974. During this time the indicator showed that the ice surface was intact. The stage then dropped sharply and the indicator read that the ice was out. The erratic chart trace after that was consistent with the assumption that the ice surface had broken up and that some short duration jams of broken ice were occurring.

Halliday, R. A.↗
NASA NTRS1974

Water survey of Canada: Application for use of ERTS-A for retransmission of water resources data

The author has identified the following significant results. Water resources data were retransmitted from nine data collection platforms (DCP) located in remote regions of Canada. The DCPs located in the Arctic operated in temperatures lower than -40 C and the DCP antennas have survived wind speeds of greater than 80 kph and snow loads of a depth of one metre. Ice-out indicators were installed at a few DCP sites. The purpose of these indicators was to enable the detection of the movement of ice out of river channel during spring break-up. The suitability of satellite retransmission as a means of obtaining data from remote areas of Canada continues to be demonstrated. A modest expansion of the DCP network is planned.

Halliday, R. A.↗
NASA NTRS1975

Water survey of Canada: Application for use of ERTS-A for retransmission of water resources data

The author has identified the following significant results. Water resources data including water level, water velocity, precipitation, air temperature, ice-out indicator, data collection platform battery check and water stage recorder clock operation have been transmitted from remote areas in Canada using the ERTS Data Collection System. The system has met all requirements. The suitability of satellite retransmission has been demonstrated. The present network will be expanded to 28 in 1975.

Halliday, R. A.↗
NASA NTRS1975

Evaluation of an ERTS-1 data collection platform installed in the Alpine Tundra, Colorado

The communication of data in real-time to users from ground stations in remote areas is a major objective of recent space technology. The data collection system considered uses small battery-operated ground-based transmitters called data collection platforms (DCP). The feasibility of collecting environmental data in extreme cold and windy environments using the ERTS DCP, has been investigated. A summary of the results of an evaluation of the system used is presented.

Barry, R. G.↗
NASA NTRS1977

Precision centering vise

Lightweight device automatically alines stainless-steel tubing and fittings, regardless of differing diameters, prior to joining via induction brazing. Device is useful in remote areas where existing supports or walls cannot be used to anchor tubing holder.

Thompson, J. A.↗
NASA NTRS1976

Possible methods for USSR-VLF navigation receivers

The U.S.S.R. has a VLF navigation system similar to OMEGA. Beukers has reported some information on the signal format, frequencies used, and the probable radiated power levels. From this data it appears possible to derive receiver operation modes and some implied reasons for the unique choice of the time-multiplexed frequency time base used. Of interest are receiver methods requiring processor gate complexity similar to a digital wristwatch including the use of mass-produced low frequency quartz crystal reference oscillators. The stability required of the local reference oscillator is probably much less critical than for other VLF receivers because of the signal format. One conclusion is that U.S.S.R.-VLF receivers might be fabricated at quite low cost making it possible for all persons in remote areas each to have his own private positioning aid. Further study of the actual transmitted signal format is warranted. While the nature of this memorandum is speculative because of the lack of confirming data, the receiver method proposed has evolved from related principles which have been applied to the operating OMEGA-VLF navigation system.

Burhans, R. W.↗
NASA NTRS1975

Activities in space-based solar power development

Two space-based power concepts are considered. The satellite solar power system concept employs a large solar cell array to convert solar energy to electrical energy. The energy, in the form of microwaves, is transmitted to the ground where it is converted to dc power and transmitted to the utility network. According to the power relay satellite concept, power is generated on the ground at large stations in remote areas. The generated power in the form of microwaves is beamed for distribution to a relay satellite. Studies related to an investigation of the feasibility of the two concepts are briefly discussed.

Whitacre, W. E.↗
NASA NTRS1976

STARPAHC - Operational findings

Delivery of quality health care to passengers of extended-mission spacecraft and to remote populations on earth (a major national problem) requires extending the knowledge and skills of the physician many kilometers distant from his physical location. The STARPAHC telemedicine system accomplishes this by using physician's assistants complemented with space technology in communications, data handling, and systems engineering. It is presently in operation and undergoing a 2-year evaluation on the Papago Indian Reservation, Arizona. Results have established its feasibility as a solution for remote area health care on earth, while providing information useful to the planners of advanced manned spacecraft missions.

Belasco, N.↗
NASA NTRS1976

Retransmission of hydrometric data in Canada

The author has identified the following significant results. Results have demonstrated the suitability of satellite retransmission as a means of obtaining near real time data from remote areas in Canada. Capital costs of the equipment installed at a gaging station are reasonable, and indications are that the DCPs do not require much maintenance. The potential impact on water resources data gathering activities is considerable.

Halliday, R. A.↗
NASA NTRS1976

STARPAHC Interim Evaluation Report, May 1975 - April 1976

The primary goals of the STARPAHC Program are to provide data for developing health care for future manned spacecraft, and to establish the feasibility of the STARPAHC concept for improving the delivery of health care to remote areas on earth. Accordingly, the hardware and medical evaluations initiated during the first 6 months of system operation were continued and expanded during the second 6-month period. The evaluations are based on what has proven to be a relatively stabilized 6-month period wherein system failures which occurred during the initial shakedown period in the first 6 months have been minimized. Early trends and performance data reported in the first semi-annual report were reexamined to either verify, modify or change earlier conclusions. The highlights are given of the total year of operation with emphasis on comparisons between the first and second semi-annual reporting period. In addition, an early analysis of costs is summarized.

Source record↗
NASA NTRS1977

STARPAHC systems report. Volume 2: Operational performance

The Space Technology Applied to Rural Papago Advanced Health Care (STARPAHC) demonstrated the value and potential of telemedicine using physician's assistants for providing quality health care delivery to people in a remote area. Generally, the program's achievements were to: (1) establish the feasibility of the STARPAHC concept in the delivery of health care; (2) gain information for developing health care systems for future manned spacecraft; (3) determine the constraints and capabilities involved in the interaction between physicians and non-physician health care personnel; (4) determine effectiveness of the STARPAHC technique; and (5) define the additional developments that are needed and/or most valuable to improving telemedicine and its exportable potential.

Source record↗
NASA NTRS1978

Applications of advanced transport aircraft in developing countries

Four representative market scenarios were studied to evaluate the relative performance of air-and surface-based transportation systems in meeting the needs of two developing contries, Brazil and Indonesia, which were selected for detailed case studies. The market scenarios were: remote mining, low-density transport, tropical forestry, and large cargo aircraft serving processing centers in resource-rich, remote areas. The long-term potential of various aircraft types, together with fleet requirements and necessary technology advances, is determined for each application.

Gobetz, F. W.↗
NASA NTRS1976

The technology assessment of LTA aircraft systems

The advantages of conventional small and large airships over heavier than air aircraft are reviewed and the need for developing hybrid aircraft for passenger and heavy charge transport is assessed. Performance requirements and estimated operating costs are discussed for rota-ships to be used for short distance transportation near large cities as well as for airlifting civil engineering machinery and supplies for the construction of power stations, dams, tunnels, and roads in remote areas or on isolated islands.

Source record↗
NASA NTRS1977

Experiments in data collection technology using satellites

A variety of techniques potentially useful to data collection have been tested. An automatic data collection platform with a minicomputer collects and preprocesses data, then sends desired information when interrogated through a communication satellite. Position surveillance by tone-code ranging through communication satellites is automatic, real time and accurate. Emergency medical data transmissions from ambulances to hospitals can be extended to rural and remote areas by direct satellite links. A small platform can send emergency-related data through a satellite while the satellite is routinely relaying powerful communication signals. A low orbit satellite provides means to locate existing emergency locator beacons.

Anderson, R. E.↗
NASA NTRS1978

New works in space

Goods and services that may be furnished by the Space Shuttle are described. A single multibeam antenna array capable of supplying satellite communication for 256 U.S. cities, a disaster warning network, and a TV link to remote areas is discussed. Attention is also given to such materials processing programs as crystal growth (for example, production of mercuric iodide crystals for gamma-ray detectors), eutectic growth of solid-solution crystals such as mercury-cadmium-telluride, manufacture of uniform latex spheres for medical applications, and development of small glass spheres for fusion power applications. In addition to the Space Telescope, a meter-class telescope on the Shuttle and a wide-field survey instrument are under study.

Kingsbury, J. E.↗