Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Next Generation Low-Cost Reflector (Phase 1 Final Report)

The overall objective was to improve the optical performance and reduce the unit cost of the reflector assembly in Concentrated Solar Power applications. The specific objective was to identify and demonstrate approaches to reduce the real Levelized Cost of Energy (LCOE) of the power produced in a CSP system to $\$$0.08/kWh. This objective was to be achieved through the cumulative impacts of 1) a durable 1 st surface mirror with a reflectivity of 97% or more and reducing the impact of soiling by 1% or more, 2) reduction in the unit cost of the reflector assembly by 8% or more through material costs reductions of both the mirror and the support structure and 3) improvement in the performance of reflector assembly through changes in the design and geometry of the support structure.

14 SOLAR ENERGY↗

Incidental Reflector Comparison of Containerized Dry Fire Extinguishing Agents

This document addresses the incidental reflector reactivity worth of containerized fire extinguishing agents authorized for use in PF-4 at Los Alamos National Laboratory (LANL). The intent of the document is to analyze dry fire extinguishing agent that remains in a container and is not actively being used in a fire emergency. The incidental reflector reactivity worth is determined by comparison to various thicknesses of close fitting water reflection which is commonly used to bound incidental reflectors in criticality safety evaluations. The conclusion is that even in unlimited quantities, when containerized the authorized dry fire extinguishing agents are bound by 0.4 inches of close fitting water.

36 MATERIALS SCIENCE↗

Reflector coatings development (FY2020 End of Year Report)

X-ray detection instrumentation has been developed and manufactured at LANL for various DOE programs. One way to improve light collection efficiency, for a scintillator type detector, is to apply suitable reflectors. The coating capability and fabrication procedure for Al reflective coatings was established in FY19 at MST-7. Al reflective coatings with good stability, good adhesion to LSO, and reflectivity (R) up to 78% were fabricated. Materials with higher diffuse reflectivity (such as Teflon tape R=99%) are desirable. A literature search revealed a number of materials in the form of paint or free standing tape with diffuse R = 98- 99%. However, for the intended application such reflectors have to be applied in the form of a coating with strong adhesion to LSO crystals. The purpose of the FY20 project was to develop thin film coating techniques for PTFE (known as Teflon) reflectors and fabricate reflective coatings on provided LSO crystals.

36 MATERIALS SCIENCE↗

Method of manufacturing large dish reflectors for a solar concentrator apparatus

A method of manufacturing monolithic glass reflectors for concentrating sunlight in a solar energy system is disclosed. The method of manufacturing allows large monolithic glass reflectors to be made from float glass in order to realize significant cost savings on the total system cost for a solar energy system. The method of manufacture includes steps of heating a sheet of float glass positioned over a concave mold until the sheet of glass sags and stretches to conform to the shape of the mold. The edges of the dish-shaped glass are rolled for structural stiffening around the periphery. The dish-shaped glass is then silvered to create a dish-shaped mirror that reflects solar radiation to a focus. The surface of the mold that contacts the float glass preferably has a grooved surface profile comprising a plurality of cusps and concave valleys. This grooved profile minimizes the contact area and marring of the specular glass surface, reduces parasitic heat transfer into the mold and increases mold lifetime. The disclosed method of manufacture is capable of high production rates sufficiently fast to accommodate the output of a conventional float glass production line so that monolithic glass reflectors can be produced as quickly as a float glass production can make sheets of float glass to be used in the process.

14 SOLAR ENERGY↗

Lamp with a truncated reflector cup

A lamp assembly, and method for making same. The lamp assembly includes first and second truncated reflector cups. The lamp assembly also includes at least one base plate disposed between the first and second truncated reflector cups, and a light engine disposed on a top surface of the at least one base plate. The light engine is configured to emit light to be reflected by one of the first and second truncated reflector cups.

42 ENGINEERING↗

Weatherable solar reflector with high abrasion resistance

Described herein are solar reflectors which provide a low cost reflector construction that has a unique set of attributes: high solar reflectance, abrasion resistance, UV stability, mechanical integrity, and flexibility. The abrasion resistance is enabled through incorporation of an abrasion-resistant coating into a polymer film metal mirror construction. Methods of using the solar reflectors in solar concentrating applications are also provided.

14 SOLAR ENERGY↗

Edge reflector or refractor for bifacial solar module

One embodiment relates to a bifacial photovoltaic module having an edge reflector. The module includes a plurality of solar cells in an array, each solar cell having a front side and a back side. A reflector is configured on an edge of the array of solar cells, the first reflector being configured to reflect light onto the front side of a row of solar cells adjacent to the edge. Another embodiment relates to a method of reducing non-uniformity of power generation from a bifacial photovoltaic module. Electrical current produced from solar cells along at least one edge of the array is increased by using a reflective strip facing towards the front side of the solar cells along the edge. Another embodiment relates to a bifacial photovoltaic module having an edge refractor. Other embodiments and features are also disclosed.

Rose, Douglas H.↗

Enhanced graphite neutron reflector with beryllium oxide inclusions

A nuclear reactor is disclosed including a reactor core and a reflector assembly surrounding the reactor core. The reflector assembly includes a stationary reflector component including a graphite support structure comprising a plurality of channels defined therein and a plurality of beryllium-oxide pins positioned in the channels.

Aleshin, Yuriy↗

The Effects of Reflector on Core Reactivity for Conceptual Soluble Boron Free SMR

Various small modular reactor (SMR) designs have been proposed by the nuclear vendors and universities in order to address the energy needs for developing countries and remote communities. Most of them target for the long-term fuel cycle of 4 years or more to achieve high availability. In addition, soluble boron free operation is proposed to simplify the primary system, to enhance the safety characteristics by inherent negative moderator temperature coefficients, etc. The neutron economy should be improved to achieve longer cycle length with a small core. Therefore, analysis of reflector for Conceptual Soluble Boron Free SMR. (CSBF-SMR) is required. In this study, five materials for radial reflector were selected to investigate the effect on core reactivity. Their thickness was also analyzed to get an optimum configuration. The goal of this study is to determine optimum material and thickness of reflector of the CSBF-SMR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reduction of effective terahertz focal spot size by means of nested concentric parabolic reflectors

An ongoing limitation of terahertz spectroscopy is that the technique is generally limited to the study of relatively large samples of order 4 mm across due to the generally large size of the focal beam spot. We present a nested concentric parabolic reflector design which can reduce the terahertz focal spot size. This parabolic reflector design takes advantage of the feature that reflected rays experience a relative time delay which is the same for all paths. The increase in effective optical path for reflected light is equivalent to the aperture diameter itself. We have shown that the light throughput of an aperture of 2 mm can be increased by a factor 15 as compared to a regular aperture of the same size at low frequencies. This technique can potentially be used to reduce the focal spot size in terahertz spectroscopy and enable the study of smaller samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advanced Manufacture of Reflectors

The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors less than 1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m 2 in 2020, a significant reduction compared to the present ~$35/m 2 for solar trough mirrors produced for trough solar plants.

14 SOLAR ENERGY↗

Methods for Service Life Time Estimation of Aluminum Reflectors

In order to reduce electricity generation costs of concentrating solar power (CSP) technologies, new low-cost reflector materials are being developed. These materials need to withstand difficult outdoor conditions without a significant loss in specular reflectance. In this work, samples of enhanced anodized aluminum reflectors protected by a sol-gel coating exposed at different weathering siteshave been analyzed with an innovative specular reflectometer and accelerated aging tests have been carried out in order to estimate the service lifetime. A new accelerated aging procedure is proposed, which consists in combining abrasion and corrosion testing.

14 SOLAR ENERGY↗

STARTUP REACTIVITY ACCOUNTABILITY ATTRIBUTED TO ISOTOPIC TRANSMUTATIONS IN THE IRRADIATED BERYLLIUM REFLECTOR OF THE HIGH FLUX ISTOTOPE REACTOR

The objective of this study is to develop a methodology to predict the reactivity impact as a function of outage time between cycles of 3He, 6Li, and other poisons in the High Flux Isotope Reactor s (HFIR) beryllium reflector. The reactivity worth at startup of the HFIR has been incorrectly predicted in the past after the reactor has been shut-down for long periods of time. The incorrect prediction was postulated to be due to the erroneous calculation of 3He buildup in the beryllium reflector. It is necessary to develop a better estimate of the start-of-cycle symmetric critical control element positions since if the estimated and actual symmetrical critical control element positions differ by more than $1.55 in reactivity (approximately one-half inch in control element startup position), HFIR is to be shutdown and a technical evaluation is performed to resolve the discrepancy prior to restart. 3He is generated and depleted during operation, but during an outage, the depletion of 3He ceases because it is a stable isotope. 3He is born from the radioactive decay of tritium, and thus the concentration of 3He increases during shutdown. The computer program SCALE, specifically the TRITON and CSAS5 control modules including the KENO V.A, COUPLE, and ORIGEN functional modules were utilized in this study. An equation relating the down time (td) to the change in symmetric control element position was generated and validated against measurements for approximately 40 HFIR operating cycles. The newly-derived correlation was shown to improve accuracy of predictions for long periods of down time.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

All‐Dielectric Heterogeneous Metasurface as an Efficient Ultra‐Broadband Reflector

Conventional all‐dielectric metasurfaces made from high‐index and low‐loss materials (such as Si or GaAs) can achieve high optical efficiencies as well as broadband characteristics, mostly for the infrared (IR) light. However, maintaining the bandwidth and efficiency for conventional all‐dielectric metasurfaces for visible or near‐IR light becomes challenging, due to the limitations from material selection as well as fabrication techniques. In this paper, the idea of heterogeneous all‐dielectric metasurfaces is proposed for a better metasurface design in shorter‐wavelength ranges. An ultra‐broadband reflector, as a proof‐of‐principle demonstration, is presented in this paper, both numerically and experimentally. The broadband reflector demonstrates a good optical efficiency, a broadband reflectance, as well as a great manufacturability. Nanoimprint lithography patterning process and advanced etching recipes are developed for the large‐area and low‐cost heterogeneous metasurface fabrication.

Yao, Yuhan↗

Reflector Selection for the Indexing of Electron Backscatter Diffraction Patterns

Abstract We propose a new methodology for ranking the reflectors used in traditional Hough-based indexing of electron backscatter diffraction (EBSD) patterns. Instead of kinematic X-ray or electron structure factors ( F hkl ) currently utilized, we propose the integrated Kikuchi band intensity parameter ( β hkl ) based on integrated dynamical electron backscatter intensities. The proposed parameter is compared with the traditional kinematical intensity, $I_{hkl}^{{\rm kin}} $ , as well as the average Hough transform peak intensity, $I_{hkl}^{{\rm HSP}} $ and used to index EBSD patterns for a number of different material systems of varying unit cell complexities including nickel, silicon, rutile, and forsterite. For elemental structures, β hkl closely follows the kinematical ranking. However, significant ranking differences arise for more complex unit cells, with the β hkl parameter showing a better correlation with the integrated Hough intensities. Lastly, Hough-based indexing of a simulated forsterite data set showed an appreciable improvement in the median confidence index (0.15 to 0.35) when β hkl is used instead of $I_{hkl}^{{\rm kin}} $ for ranking the reflectors.

36 MATERIALS SCIENCE↗

Improve growth rate of Smith-Purcell free-electron laser by Bragg reflector

Grating with Bragg reflectors for the Smith-Purcell free-electron laser is proposed to improve the reflection coefficient, resulting in enhancing the interaction of the surface wave with the electron beam and, consequently, relax the requirements to the electron beam. With the help of particle-in-cell simulations, it has been shown that the usage of Bragg reflectors may improve the growth rate, shorten the time for the device to reach saturation, and lower the start current for the operation of a Smith-Purcell free-electron laser.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of antimony nano-scale surface-structures on a GaSb/AlAsSb distributed Bragg reflector

Effects of antimony crystallization on the surface of GaSb during low temperature molecular beam epitaxy growth are investigated. The geometry of these structures is studied via transmission electron and atomic force microscopies, which show the surface metal forms triangular-shaped, elongated nano-wires with a structured orientation composed entirely of crystalline antimony. By depositing antimony on a GaSb/AlAsSb distributed Bragg reflector, the field is localized within the antimony layer. Polarization dependent transmission measurements are carried out on these nano-structures deposited on a GaSb/AlAsSb distributed Bragg reflector. It is shown that the antimony-based structures at the surface favor transmission of light polarized perpendicular to the wires.

36 MATERIALS SCIENCE↗

AlP/GaP distributed Bragg reflectors

Distributed Bragg reflectors with high reflectivity bands centered at wavelengths from 530 to 690 nm (green to red) based on AlP/GaP quarter-wave stacks are prepared on (001)GaP using gas-source molecular-beam epitaxy. Additionally, the complex refractive index of AlP is measured using spectroscopic ellipsometry within the range of 330-850 nm in order to facilitate an accurate reflector design. Structures consisting of 15 quarter-wave stacks reach a peak reflectance between 95% and 98%, depending on the spectral position of the maximum.

36 MATERIALS SCIENCE↗