Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFINERY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Coprocessing Biomass Fast Pyrolysis and Catalytic Fast Pyrolysis Oils with Vacuum Gas Oil in Refinery Hydroprocessing

Fast pyrolysis and catalytic fast pyrolysis (CFP) have been considered to be promising approaches for converting lignocellulosic biomass into liquid bio-oils followed by upgrading to produce fuel-range hydrocarbon products. Co-processing fast pyrolysis and CFP bio-oils with petroleum feedstocks leverages the existing petroleum refining infrastructure, which reduces Capex for the overall conversion technologies for biomass to fuel and enables fast adoption of the technologies and biofuels. Here, we reported the co-processing of different woody fast pyrolysis and CFP bio-oils with petroleum vacuum gas oil (VGO) at 5-25% bio-oil blending levels over a NiMo sulfide catalyst for mild hydrocracking. The catalyst activities over ~300 hours time on stream, the product yield and properties, and the biogenic carbon content in products are provided. Co-processing of the raw fast pyrolysis bio-oil in our configuration was not successful because the instability of the bio-oil resulted in reactor plugging and bio-oil stabilization by hydrogenation enabled their stable co-processing with VGO, whereas the CFP bio-oil can be co-processed without pretreatment. Simultaneous hydrodesulfurization, hydrodeoxygenation, and hydrocracking reactions occurred during co-processing and no obvious decrease in hydrodesulfurization and hydrocracking conversion of VGO was observed, suggesting the minimal impact of co-processed bio-oils on the reaction of VGO and also the simultaneous conversion of bio-oil and VGO to produce fuel products with much-reduced S and O content. Biogenic carbon content in co-processed products calculated by yield mass balance, together with results from isotopic measurements, indicates high biogenic carbon incorporation into liquid hydrocarbon products. In conclusion, higher biogenic carbon incorporation into fuel products was observed when co-processing CFP bio-oils than the fast pyrolysis bio-oils and over 90% of carbon in CFP bio-oil was incorporated into liquid hydrocarbon products.

09 BIOMASS FUELS↗

Initial Assessment of U.S. Refineries for Purposes of Potential Bio-Based Oil Insertions

In order to meet U.S. biofuel objectives over the coming decade the conversion of a broad range of biomass feedstocks, using diverse processing options, will be required. Further, the production of both gasoline and diesel biofuels will employ biomass conversion methods that produce wide boiling range intermediate oils requiring treatment similar to conventional refining processes (i.e. fluid catalytic cracking, hydrocracking, and hydrotreating). As such, it is widely recognized that leveraging existing U.S. petroleum refining infrastructure is key to reducing overall capital demands. This study examines how existing U.S. refining location, capacities and conversion capabilities match in geography and processing capabilities with the needs projected from anticipated biofuels production.

09 BIOMASS FUELS↗

Optimized Co-Processing of Algae Bio-Crude through a Petroleum Refinery

A middle distillate algal oil blend and red diesel algal oil blend from Sapphire Energy, Inc. were hydrotreated and distilled. The middle distillate feedstock blend was 8.0 wt.% biocrude and 92.0 wt.% middle distillate. The red diesel feedstock blend was 12.6 wt.% biocrude and 87.4 wt.% red diesel. During steady state, 151.4 kilograms of hydrotreated middle distillate/algal oil blend product was collected. During steady state, 312.6 kilograms of red diesel/algal oil blend hydrotreated product was collected. From the liquid product of the hydrotreated middle distillate/algal oil blend, 9.75 wt.% of the jet fuel cut is estimated to be from the algal oil. From the liquid product of the hydrotreated red diesel/algal oil blend, 11.3 wt.% of the diesel cut is estimated to be from the algal oil. The jet fuel cut of the middle distillate algal oil blend hydrotreated liquid product was analyzed using ASTM D1655, Standard Specification for Aviation Turbine Fuels. The diesel cut of the red diesel algal oil blend hydrotreated liquid product was analyzed using ASTM D975, Standard Specification for Diesel Fuel Oils.

09 BIOMASS FUELS↗

Techno‐economics of microalgae production and conversion to refinery‐ready oil with co‐product credits

Abstract The economics of the production of hydrotreated algal oil ( HTAO ) along with co‐production of animal feed and nutraceuticals (omega‐3 oils) was explored. Base case calculations were for commercial scale production of 10 000 barrels per day of HTAO with nutraceuticals claiming only 0.05% of the raw algae oil ( AO ). The sensitivity of economics to critical parameters was studied. The greatest sensitivity of sales price was to the algae doubling time. Doubling time might be reduced by increasing pond velocity or other mixing‐inducing means. Other important parameters were oil content, CAPEX , and moisture content of post‐extracted algal residue. Algal area weight productivity (g/m 2 /day) was calculated from four parameters: initial algal concentration, pond depth, residence time in pond, and algae doubling time. Using presently accepted operating parameter values and with co‐product credits, the estimated plant gate price was ~ $10/gal. However, it was shown that there is significant potential for enhanced economics through moderate improvements in many areas. Credits for co‐production of animal feed and nutraceuticals were $3.24/gal and $0.14/gal, respectively. At constant oil area productivity (gal/acre/yr), the trade‐off between oil content and area weight productivity favors oil content. In the limit of 100% oil content (no solid co‐product) a sale price of $7.90/gal was estimated. Hydrotreatment of AO was discussed. Municipal waste‐water tertiary treatment was briefly discussed but not deemed viable on a large scale. An easy‐to‐use Excel spreadsheet for material and energy balances and economics was developed as a flexible scouting tool. The symbol ‘$’ denotes US dollars. © 2015 Society of Chemical Industry and John Wiley & Sons, Ltd

Manganaro, James L.↗

Chapter 4 - Pretreatment Technologies for Lignocellulosic Biomass Refineries

Pretreatment is a critical step in processing lignocellulosic biomass into biofuel and bioproducts and is considered the energy and cost center of the biomass conversion process. Although a large number of pretreatment technologies have been developed, not all the techniques are viable on a commercial scale at this stage. Moreover, the technology choice and process conditions depend highly on the type of biomass and the overall biorefinery scheme. This chapter provides an overview of different pretreatment methods, including their mechanism, important process parameters, current status, and challenges. The opportunities associated with new technologies and approaches are presented. Emphasis is placed on low-severity thermal pretreatment technologies. The chapter also provides a brief discussion of the challenges to achieving the economic viability of the technologies on a commercial scale.

BIOMASS FUELS↗