Programmable Bloch polaritons in graphene
When light-matter polaritons travel in periodic media, they acquire properties akin to Bloch quasi-particles in crystals.
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “QUASI PARTICLES”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Lifetimes of negative parity states in 162 Dy
Lifetimes of excited states in 162 Dy were measured using the (n,n’$γ$) reaction with the Doppler-Shift Attenuation Method (DSAM) at the University of Kentucky’s Accelerator Laboratory. A total of eighteen level lifetimes were obtained, including eleven negative-parity states, seven of which are new. These measurements significantly expand the experimental database of transition probabilities for negative-parity bands in the well-deformed rare earth region of nuclei. The extracted B(E1) and B(E2) values reveal enhanced interband E1 (10 -3 or 10 -4 ) W.u. and E2 strengths (several W.u.) between negative- and positive parity bands, particularly for the K π = $2^{-}_{1,2}$ bands decaying to the K π = $2^+_γ$ band, consistent with signatures of octupole-quadrupole coupling. In contrast, the K π = $0^{-}_1$ and K π = $1^{-}_3$ bands, which exhibit strong E1 transitions to the ground state band, are indicative of octupole-vibrational excitations built on the deformed ground state. Comparison of transition rates with Alaga rules supports this interpretation and distinguishes collective excitations from likely quasi-particle states. These new results establish 162 Dy as the most extensively characterized rare-earth nucleus for negative parity lifetimes and provide critical experimental benchmarks for theoretical models.
Aprahamian, A. [University of Notre Dame, IN (Unit↗
Strong QCD from Hadron Structure Experiments
The topical workshop Strong QCD from Hadron Structure Experiments took place at Jefferson Lab from November 6–9, 2019. Impressive progress in relating hadron structure observables to the strong QCD mechanisms has been achieved from the ab initio QCD description of hadron structure in a diverse array of methods in order to expose emergent phenomena via quasi-particle formation. The wealth of experimental data and the advances in hadron structure theory make it possible to gain insight into strong interaction dynamics in the regime of large quark–gluon coupling (the strong QCD regime), which will address the most challenging problems of the Standard Model on the nature of the dominant part of hadron mass, quark–gluon confinement, and the emergence of the ground and excited state hadrons, as well as atomic nuclei, from QCD. This workshop aimed to develop plans and to facilitate the future synergistic efforts between experimentalists, phenomenologists, and theorists working on studies of hadron spectroscopy and structure with the goal to connect the properties of hadrons and atomic nuclei available from data to the strong QCD dynamics underlying their emergence from QCD. These results pave the way for a future breakthrough extension in the studies of QCD with an Electron–Ion Collider in the U.S.
Brodsky, S. J.↗
Kohn-Sham Solver (KSSOLV) v2.0
KSSOLV is a MATLAB toolbox for solving Kohn-Sham density functional theory based electronic structure eigenvalue problems. It uses an object oriented features of MATLAB to represent atom, molecules, wavefunctions and Hamiltonians and their operations. It is designed to make it easier for users to prototype and test new algorithms for solving the Kohn-Sham problem. KSSOLV2.0 contains significant improvement over the original KSSOLV described in a paper published in ACM Transaction on Mathematical Software (attached). In addition to performing ground state calculation for small molecules, it can also perform geometry optimization for both molecules and solids. It uses standard pseudopotentials and implements local density approximation, generalized gradient approximation and hybrid functionals. Future releases will also include time-dependent DFT and post DFT calculations such as the GW quasi-particle energy calculation and Bethe-Salpeter equation solver for optical absorption.
Yang, Chao↗
The color of magnetic monopole noise
We relate the anomaly in the noise color of spin ice to the emergent nature of its magnetic monopoles and their random walk. Monopoles are quasi-particles, and the spin vacuum in which they wander is not structureless. Rather, the underlying spin ensemble filters the thermal white noise, leading to non-trivial coevolution. Thus, monopoles can be considered as "dressed" random walkers, activated by a non-trivial stochastic noise that subsumes mutual interactions and the coevolution of their spin vacuum. From this, we suggest that recent experimental results are interpretable in terms of monopole subdiffusion. Furthermore, we then conjecture relations between the color of the noise and other observables, such as relaxation time, monopole density, the dynamic exponent, and the order of the annihilation reaction, which suggests to us the introduction of spin-ice-specific critical exponents in a neighborhood of the ice manifold criticality.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
IMPACT OF MEDIUM TEMPERATURE HEAT TREATMENT ON FLUX TRAPPING SENSITIVITY IN SRF CAVITIES
The effect of mid-T heat treatment on flux trapping sensitivity was measured on several 1.3 GHz single cell cavities subjected to medium temperature vacuum annealing at temperature of 150 - 400 ?C for a duration of 3 hours. The cavity was cooldown with residual magnetic field ?0 and ?20 mG in Dewar with cooldown condition of full flux trapped. The quality factor as a function of accelerating gradient was measured. The results show the correlation between the treatment temperature, quality factor, and sensitivity to flux trapping. Sensitivity increases with increasing heat treatment temperatures within the range of (200 - 325 ?C/3h).Moreover, variations in the effective penetration depth ofthe magnetic field and the density of quasi-particles can occur,influencing alterations in the cavity?s electromagneticresponse and resonance frequency.
Dhakal, P.↗
Quasiparticle Couplings in Transport of Heat, Charge, and Spin for Novel Energy Materials. Final report
Understanding the microscopic processes involved in the transport and conversion of energy from the atomic-scale to the meso-scale is critical for the development of next-generation materials for energy conversion and information processing. The goal of this program was to elucidate the couplings between microscopic degrees-of-freedom of atomic vibrations, spins, and electrons, which underpin heat, charge, and spin transport. This project systematically investigated these quasi-particle interactions, using state-of-the-art neutron scattering techniques, combined with first-principles computer simulations. This research program uncovered new information and understanding, which helps to rationalize materials properties based on the interplay of their atomistic degrees of freedom.
36 MATERIALS SCIENCE↗
Collective Energy Transport of Excitons in Two-dimensional Materials
Electronic thermal transport and thermoelectric measurements are pursued in this project to obtain unique insights into the unusual collective energy transport behaviors in two-dimensional (2D) heterostructures. Electronic thermal transport and thermoelectric measurements are essential techniques for characterizing bulk superconductors by probing the heat-carrying quasi-particles. Thermoelectric and electronic thermal transport measurements are expanded in this work beyond bulk systems to probe interactions among electrons, holes, and phonons in 2D heterostructures. In one experiment, a microbridge platform is advanced to demonstrate field-effect resistive-thermometry measurements of the electronic thermal conductivity of graphene heterostructures. Together with first principles theoretical calculations and analytical models, the experimental results suggest that tunable electron coupling with flexural phonons provides a knob to control quantum matters in graphene heterostructures with broken reflection symmetry. In another experiment, the Seebeck coefficient (S) is measured to probe interlayer interactions in electron-hole bilayers that are predicted to give rise to the emergence of a variety of correlated states. As a measure of the entropy, the measured S reveals the signature of electric injection of interlayer excitons in transition metal dichalcogenide (TMD) structures.
36 MATERIALS SCIENCE↗
High-Quality Factor Microwave Resonators using Rhenium
Coplanar waveguide resonators are a perfect tool to evaluate the losses induced by defects and interfaces in superconducting devices. Even if niobium is the most used superconductor for resonators and qubits, its native oxide at the metal-air (MA) interface limits the device results. Tantalum has recently significantly improved qubit performances due to a thinner and less disordered oxide layer compared to Nb. To further improve the MA interface, we used rhenium, a superconducting material with 1.7 K critical temperature resistant to oxidation: it forms an oxide layer thinner than 1 nm. In this study, we will present a thorough investigation of rhenium CPW resonator measurements with internal quality factors at the single photon level exceeding 2 million. The devices have been fabricated on a sapphire substrate while the processing parameters have been varying and optimized. The measurements have been performed as a function of power and temperature to disentangle different sources of losses, such as two-level systems (TLS) and quasi-particles. A peculiar TLS temperature dependence has been measured and analyzed. In this work, we also vary the participation ratio of the devices to extract the losses introduced by the involved interfaces with higher fidelity and precision. We carried on a deep material characterization effort to link the results to the differences in the fabrication steps, and we will present material characterization measurements performed via AFM, ToF-SIMS, XPS, and TEM.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Quantum disorder, duality, and fractional statistics in 2 + 1 dimensions
A low-energy equivalence between two apparently unrelated Lagrangians with fractional statistics is reported. Exploiting this equivalence, it is possible to study the quantum disordered phase of the nonlinear sigma model with Hopf term. It is found that the quasi-particles in the disordered phase also have fractional statistics. There appears to be a dual relationship between the ordered and disordered phases.
Wen, X. G.↗
A superconducting tunnel junction receiver for 345 GHz
The design, fabrication, and testing of a quasi-particle tunnel junction receiver for use at 345 GHz are discussed. The design employs small area Nb/Nb-oxide/PbInAu edge junctions in order to keep the device capacitance small and maintain a modest value for omega R(N)C. For optimum noise performance and beam properties the mixer is contained in a waveguide mounting structure. The best sensitivity was obtained at 312 GHz where a double sideband (DSB) noise temperature of 275 K was measured. Noise temperatures of 400 K (DSB) or better were obtained out to 350 GHz.
Sutton, E. C.↗
Electronic energy gap of molecular hydrogen from electrical conductivity measurements at high shock pressures
Electrical conductivities were measured for liquid D2 and H2 shock compressed to pressures of 10-20 GPa (100-200 kbar), molar volumes near 8 cu cm/mol, and calculated temperatures of 2900-4600 K. The semiconducting energy gap derived from the conductivities is 12 eV, in good agreement with recent quasi-particle calculations and with oscillator frequencies measured in diamond-anvil cells.
Nellis, W. J.↗
Low-Noise Submillimeter-Wave NbTiN Superconducting Tunnel Junction Mixers
We have developed a low-noise 850 GHz superconductor-insulator-superconductor (SIS) quasi-particle mixer with NbTiN thin-film microstrip tuning circuits and hybrid Nb/AlN/NbTiN tunnel junctions. The mixer uses a quasioptical configuration with a planar twin-slot antenna feeding a two-junction tuning circuit. At 798 GHz, we measured an uncorrected double-sideband receiver noise temperature of T(sub RX) = 260 K at 4.2 K bath temperature. This mixer outperforms current Nb SIS mixers by a factor of nearly 2 near 800 GHz. The high gap frequency and low loss at 800 GHz make NbTiN an attractive material with which to fabricate tuning circuits for SIS mixers. NbTiN mixers can potentially operate up to the gap frequency, 2(delta)/h is approximately 1.2THz.
Kawamura, J.↗
Heat Capacity and Thermal Conductance Measurements of a Superconducting-Normal Mixed State by Detection of Single 3 eV Photons in a Magnetic Penetration Thermometer
We report on measurements of the detected signal pulses in a molybdenum-gold Magnetic Penetration Thermometer (MPT) in response to absorption of one or more 3 eV photons. We designed and used this MPT sensor for x-ray microcalorimetry. In this device, the diamagnetic response of a superconducting MoAu bilayer is used to sense temperature changes in response to absorbed photons, and responsivity is enhanced by a Meissner transition in which the magnetic flux penetrating the sensor changes rapidly to minimize free energy in a mixed superconducting normal state. We have previously reported on use of our MPT to study a thermal phonon energy loss to the substrate when absorbing x-rays. We now describe results of extracting heat capacity C and thermal conductance G values from pulse height and decay time of MPT pulses generated by 3 eV photons. The variation in C and G at temperatures near the Meissner transition temperature (set by an internal magnetic bias field) allow us to probe the behavior in superconducting normal mixed state of the condensation energy and the electron cooling power resulting from quasi-particle recombination and phonon emission. The information gained on electron cooling power is also relevant to the operation of other superconducting detectors, such as Microwave Kinetic Inductance Detectors.
superconductivity↗
Fabrication of Phononic-Isolated Kinetic Inductance Detectors
Kinetic inductance detectors (KID) have received increased interest due to their relative ease of fabrication, low noise, and scalability to large format arrays required by next generation of astronomical telescopes. The development of KIDs has progressed rapidly, with very low noise equivalent power demonstrated by several groups and KIDs arrays implemented in several ground-based and air-borne instruments. In this paper, we describe a new fabrication process which consists of a membrane isolated KID incorporating a phononic bandgap structure tuned to block recombination phonons from escaping to the thermal bath. This architecture is designed to increase the quasi-particle lifetime and results in increased responsivity to signal photons and lower noise. These devices have been fabricated as lumped-element resonators with hafnium inductors and Nb capacitors on low stress silicon nitride and silicon-on-insulator membranes. We discuss the fabrication process, which uses a combination of sub-micron laser based direct write lithography and nanoscale electron beam lithography.
Denis, Kevin L.↗
Excitons in two-dimensional metal-halide perovskites
Georgia Tech School of Chemistry and Biochemistry Special Summer Seminar Series, Prof Carlos Silva; While polarons --- charges bound to a lattice deformation induced by electron-phonon coupling --- are primary photoexcitations at room temperature in bulk metal-halide hybrid organic-inorganic perovskites (HOIP), excitons --- Coulomb-bound electron-hole pairs --- are the stable quasi-particles in their two-dimensional (2D) analogues. Here we address the fundamental question: are polaronic effects consequential for excitons in 2D-HIOPs? Based on our recent work, we argue that polaronic effects are manifested intrinsically in the exciton spectral structure, which is comprised of multiple non-degenerate resonances with constant inter-peak energy spacing. We highlight measurements of population and dephasing dynamics that point to the apparently deterministic role of polaronic effects in excitonic properties. We contend that an interplay of long-range and short-range exciton-lattice couplings give rise to exciton polarons, a character that fundamentally establishes their effective mass and radius, and consequently, their quantum dynamics. Given this complexity, a fundamentally far-reaching issue is how Coulomb-mediated many-body interactions---elastic scattering such as excitation-induced dephasing, inelastic exciton bimolecular scattering, and multi-exciton binding---depend upon the specific exciton-lattice coupling within the structured excitation lineshape. We measure the intrinsic and density-dependent exciton dephasing rates of the multiple excitons and their dependence on temperature by means of two-dimensional coherent excitation spectroscopy. We find that diverse excitons display distinct intrinsic dephasing rates mediated by phonon scattering involving different effective phonons, and contrasting rates of exciton-exciton elastic scattering. These findings establish specifically the consequence of distinct lattice dressing on exciton many-body quantum dynamics, which critically define fundamental optical properties that underpin photonics and quantum optoelectronics.
solar cells, metal-halide perovskites, excitons, p↗
Edge majorana quasiparticles and qubits
Various embodiments described herein provide for a topological quantum computer that uses edge Majorana quasi-particles to form qubits. An inverted Indium Arsenide (InAs) and Gallium Antimonide (GaSb) heterostructure is disclosed that is a quantum spin Hall insulator. A layer of aluminum can be deposited over a nanotube that is placed across the layers of the heterostructure. Once the nanotube is removed, and a gate is formed on the heterostructure and the heterostructure is cooled so that the aluminum becomes superconducting, helical edge states are formed at the junction of the super conducting aluminum, the InAs, and the GaSb which creates a Majorana zero modes (MZMs) at zero magnetic field. The MZMs can be used to construct a topological qubit for fault-resistant topological quantum computation.
Pan, Wei↗
A quasi-static particle-in-cell algorithm based on an azimuthal Fourier decomposition for highly efficient simulations of plasma-based acceleration: QPAD
The three-dimensional (3D) quasi-static particle-in-cell (PIC) algorithm is a very efficient method for modeling short-pulse laser or relativistic charged particle beam–plasma interactions. In this algorithm, the plasma response, i.e., plasma wave wake, to a non-evolving laser or particle beam is calculated using a set of Maxwell’s equations based on the quasi-static approximate equations that exclude radiation. The plasma fields are then used to advance the laser or beam forward using a large time step. The algorithm is many orders of magnitude faster than a 3D fully explicit relativistic electromagnetic PIC algorithm. It has been shown to be capable to accurately model the evolution of lasers and particle beams in a variety of scenarios. Additionally, at the same time, an algorithm in which the fields, currents and Maxwell equations are decomposed into azimuthal harmonics has been shown to reduce the algorithmic complexity of a 3D explicit PIC algorithm to that of a 2D algorithm when the expansion is truncated while maintaining accuracy for problems with near azimuthal symmetry. This hybrid algorithm uses a PIC description in r–z and a gridless description in . We describe a novel method that combines the quasi-static and hybrid PIC methods. This algorithm expands the fields, charge and current density into azimuthal harmonics. A set of the quasi-static field equations is derived for each harmonic. The complex amplitudes of the fields are then solved using the finite difference method. The beam and plasma particles are advanced in Cartesian coordinates using the total fields. Details on how this algorithm was implemented using a similar workflow to an existing quasi-static code, QuickPIC, are presented. The new code is called QPAD for QuickPIC with Azimuthal Decomposition. Benchmarks and comparisons between a fully 3D explicit PIC code (OSIRIS), a full 3D quasi-static code (QuickPIC), and the new quasi-static PIC code with azimuthal decomposition (QPAD) are also presented.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗