Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PrOF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Performance and Regulation of Photosystem II Energy Conversion in Oxygenic Phototrophs: From PSII Crystals to Living Cells

New information not previously accessible to answer remaining questions about the mechanism of PSII catalyzed water oxidation, its intrinsic inefficiencies and the regulation of PSII in living cells were obtained. This effort was done in collaboration with an expert in PSII crystallography (led by Prof. Petra Fromme, ASU). We applied a set of tools for fluorometric, oximetric, potentiometric and absorbance measurements. Transformational knowledge from PSII crystals and a powerful new fluorescence technique were developed. Three aims were addressed and 18 peer-reviewed publications were generated.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

ODU Optimization of Nb3Sn supttering on SRF structures

High efficiency Superconducting radio-frequency (SRF) cavities are the key technology to cost-effective Continuous Wave (CW) SRF accelerators. Recent advances in Nb3Sn coatings on the inner surface of SRF cavities showed the potential for this material to significantly cut the capital and operating cost of SRF accelerators. The best results are presently achieved with Nb3Sn films coated by using the so-called vapor diffusion technique. Several alternative approaches have been and are being investigated such as electrochemical deposition, bronze routes, and sputtering. Among these techniques, magnetron sputtering is a versatile technique, which has been demonstrated to deposit Nb3Sn films on SRF cavities. The technique requires further development to compete with the results demonstrated on the cavities coated with the vapor diffusion techniques. The team to develop the novel technique includes a graduate student from Old Dominion University (ODU) and other experts. ODU Prof. Elsayed-Ali directs the graduate student to coat samples and cavities in the new coating system and analyze samples with different surface science techniques. Dr. Grigory Eremeev from Fermilab assists with 2.6 GHz cavities for coating, cavity characterization at cryogenic temperature, and result analysis. The research is funded by the Office of High Energy Physics at the US Department of Energy at both Fermilab and ODU

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Stress Testing the Standard Model of Particle Physics at the Large Hadron Collider

Final technical report for the DOE grant "Stress Testing the Standard Model of Particle Physics at the Large Hadron Collider", awarded to Prof. Aram Apyan at Brandeis University. The work focused on the ATLAS experiment at LHC. During the award period the group worked on ATLAS physics analyses, all-silicon Inner Tracker (ITk) detector upgrade, and reconstruction and calibration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Shallow cumulus entrainment: observational retrieval, physical interpretation, and climate impacts (Final grant report)

This document constitutes a final technical report for DE-SC0020083, a research grant awarded by the US Department of Energy Office of Science, to Prof. Daniel Kirshbaum at McGill University. The original research proposal, entitled "Shallow cumulus entrainment: observational retrieval, physical interpretation, and climate impacts", defined four scientific objectives that synthesized ARM observations with turbulence-permitting large-eddy simulations (LES) to quantify and understand the process of cumulus entrainment, whereby a cumulus cloud ingests surrounding air through its lateral edges. These objectives included developing observational climatologies of cumulus bulk entrainment rate at two ARM observatories, physical interpretation of these findings using LES, quantification of the impacts of subcloud circulations on entrainment, and the climate impacts of flow-dependent entrainment variations. In the six years that have elapsed since the grant was awarded (three funded years and three no-cost annual extensions), all four of the objectives were successfully addressed. Four personnel were trained (one B.Sc., one M.Sc. to completion, five years of Ph.D. training, and 2.5 years of postdoctoral training), eight peer-reviewed articles were published in high-impact journals, and 20 presentations were delivered (three invited).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

PSEC5 Physical Verification

Ultra-Fast timing detectors, having a time resolution of 10pSec or less, are becoming increasingly important for many scientific disciplines, including High Energy Physics, Nuclear Physics, Medical Imaging and more. When developing ultra-fast detectors such as MCPs, LAPPDs, LGADs, SNSPDs, it is necessary to have access to a readout system that is low power, can support many channels and is cost effective. The PSEC5 chip was an application specific integrated circuit (ASIC) developed by the pioneering group of Prof. Henry Frisch at University of Chicago and micro electronic engineers at Fermi National Accelerator Laboratory. Three boards were designed, two to implement the readout system for an LAPPD and one to only characterize the PSEC1 chip. The main goal of the project shifted to setting up a testing environment to focus on the characterization of the chip. My student and I tested and characterized this ASIC using the third chip-on-board printed circuit board. Results show the successful fabrication and operation of some of the key building blocks and lead to the suggestions on modification for the second iteration of the chip.

Rico Aniles, H. D. [Unlisted]↗
DOE OSTI2026

Exotic Uses of Neutrons an X-rays as Probes for Chiral Magnets (Early Career Award) (Final Report)

This is the final report for Exotic Uses of Neutrons an X-rays as Probes for Chiral Magnets, an Early Career award to Prof. Dustin Gilbert, University of Tennessee, running 09/01/2020 - 08/31/2025. This project used neutron scattering as a unique tool to investigate magnetic chiral structures. Neutron scattering is a powerful technique in which the neutron wavepacket scatters from nuclear or magnetic structures, providing insight into the structure of a material and its magnetic features. In this work, we focused on chiral magnetic structures. Most magnetic materials are colinear ferro- or antiferromagnets, where the spin moments align parallel or anti-parallel with their neighbors. In some materials, the magnetic moments instead curl and can form closed loops. These structures, with the additional feature that the core and perimeter are oriented in opposite out-of-plane directions, exhibit a property called topology; these structures are known as skyrmions. Topology is a broadly used term, but here it refers to a magnetic configuration that cannot be created or destroyed through any continuous transformation. For these looped structures, the closed loop cannot be destroyed continuously, giving rise to unique properties such as collective dynamics and particle-like behavior. This also raises fundamental questions about how such structures form and evolve.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Fast-ion confinement in LHD and W7-X (Final Technical Report)

This project was the PhD thesis project for Wataru Hayashi, who graduated in December 2025. In work performed prior to the award while Heidbrink was a Guest Professor at NIFS, we had established conditions for the study of fast-ion confinement in the Large Helical Device (LHD) with fast-ion D-alpha (FIDA) diagnostics. Subsequently, we proposed new sightlines that could augment the existing FIDA measurements with ones that were more sensitive to the highest energy ions. During the project period, the new sightlines were installed by the LHD team and showed the expected enhanced sensitivity to high-energy ions. Many LHD experiments were led by UCI scientists remotely during the pandemic and in-person afterward. One of these, which was led by one of Professor Zhihong Lin’s PhD students (Ethan Green) in collaboration with Hayashi and Heidbrink, resulted in a Nuclear Fusion article on the effect of radial electric fields on fast-ion confinement. The main output of the project, however, is two detailed experimental papers by Hayashi et al. The first of these is a study of neoclassical fast ion confinement in MHD-quiescent plasmas, a key issue in stellarator research. The second is an initial study of the effect of Alfven eigenmodes on fast-ion confinement. In addition to these studies, the project also helped partially support stellarator research with the GTC code by members of Prof. Lin’s group.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1984

Synoptic-scale dynamics with vertical velocity, part 1.8A

Radar measurements of all three of the atmospheric velocity components by the MST technique data from all the pioneering work of Woodman and Geillen (1974). The radar horizontal velocities have been compared with other standard measurements, such as radiosonde winds, in a number of studies and are now finding widespread acceptance within the meteorological community for research and operational forecasting purposes. Perhaps the single most interesting report recently is that the mesosphere-stratosphere-troposphere (MST) profiler winds are turning out to be one of the most useful pieces of data for predicting upslope snowfall in the cold season forecasting study of the PROFS Program (Reynolds, 1983). By contrast, the vertical velocities measured by MST radars have received relatively little attention, despite the facts that direct continuous measurement of vertical velocity is unique (i.e., it cannot be done with radiosondes) and that the vertical velocity is intimately linked with the dynamics of the atmosphere. Indeed, for many forecasting applications the vertical velocity is the single most important variable, yet it is usually inferred indirectly from other dynamical variables. The stratosphere-troposphere (ST) radars now available have the potential to change this situation. Some of the results from vertical velocity measurements which have direct application in synoptic scale dynamics.

Nastrom, G. D.↗
NASA NTRS1986

Simulations of gravity waves in frontal zones

Recent observations of frontal systems passing over the PROFS network in Colorado by Shapiro (1984) indicate the horizontal scale of some fronts can be on the order of a few kilometers or less. Motivated by Shapiros results, esearchers re-ran an earlier numerical simulation of frontogenesis by Williams (1972) (where a very simple stretching deformation forcing of a front is considered) using as high a resolution in both the vertical and horizontal as was possible. Highest resolution that we considered consisted of a grid with a vertical spacing of 32 meters and a horizontal spacing of 260 meters in the immediate vicinity of the surface front. The purpose was to examine development of the frontal structures as the scale of the front became very small. Two sources for banded structures in clouds were found: (1) in the stationary waves above the front and (2) in waves propagating upward from breaking waves under the front.

Gall, R.↗
NASA NTRS1988

Meteorological and Environmental Inputs to Aviation Systems

Reports on aviation meteorology, most of them informal, are presented by representatives of the National Weather Service, the Bracknell (England) Meteorological Office, the NOAA Wave Propagation Lab., the Fleet Numerical Oceanography Center, and the Aircraft Owners and Pilots Association. Additional presentations are included on aircraft/lidar turbulence comparison, lightning detection and locating systems, objective detection and forecasting of clear air turbulence, comparative verification between the Generalized Exponential Markov (GEM) Model and official aviation terminal forecasts, the evaluation of the Prototype Regional Observation and Forecast System (PROFS) mesoscale weather products, and the FAA/MIT Lincoln Lab. Doppler Weather Radar Program.

Camp, Dennis W.↗
NASA NTRS1988

PI-in-a-box: Intelligent onboard assistance for spaceborne experiments in vestibular physiology

In construction is a knowledge-based system that will aid astronauts in the performance of vestibular experiments in two ways: it will provide real-time monitoring and control of signals and it will optimize the quality of the data obtained, by helping the mission specialists and payload specialists make decisions that are normally the province of a principal investigator, hence the name PI-in-a-box. An important and desirable side-effect of this tool will be to make the astronauts more productive and better integrated members of the scientific team. The vestibular experiments are planned by Prof. Larry Young of MIT, whose team has already performed similar experiments in Spacelab missions SL-1 and D-1, and has experiments planned for SLS-1 and SLS-2. The knowledge-based system development work, performed in collaboration with MIT, Stanford University, and the NASA-Ames Research Center, addresses six major related functions: (1) signal quality monitoring; (2) fault diagnosis; (3) signal analysis; (4) interesting-case detection; (5) experiment replanning; and (6) integration of all of these functions within a real-time data acquisition environment. Initial prototyping work has been done in functions (1) through (4).

Colombano, Silvano↗
NASA NTRS1989

Low level remote sensing: Orographic winds

The orographic flow data set was obtained from a flight program to measure the influence of orographic features on turbulence momentum, heat, and moisture fluxes. The NASA B-57 aircraft instrumented with probes for measuring the three fluctuating wind speed components, temperature, and humidity was the primary measuring vehicle. Ancillary measurements were made with several ground-based sensors. These include the NOAA radar wind profilers, the Boulder wind network, the PROFS mesoscale surface network, the Boulder Atmospheric Observatory 300 m tower, special rawinsonde observations, and the NOAA/WPL Doppler lidar. The major objective of the flight program was to provide planetary boundary layer parameter information for new and current general circulation computer models. A numerical code, WINDER, based on a discrete element technique was run to numerically model the water tunnel simulated flow. Comparison of the analytical model with the experimental results is very good. Physical fluid dynamic principles embedded in the computational model and visual and hot wire anemometer measurements from the simulation are being rationalized to develop a physical understanding of the vortex flow. The results will be interpreted as they pertain to full scale atmospheric flows.

Frost, Walter↗
NASA NTRS1992

Study of basic physical processes in liquid rocket engines

Inconsistencies between analytical results and measurements for liquid rocket thrust chamber performance, which escape suitable explanations, have motivated the examination of the basic phys ical modeling formulations as to their unlimited application. The publication of Prof. D. Straub's book, 'Thermofluid-dynamics of Optimized Rocket Propulsions,' further stimulated the interest of understanding the gas dynamic relationships in chemically reacting mixtures. A review of other concepts proposed by Falk-Ruppel (Gibbsian Thermodynamics), Straub (Alternative Theory, AT), Prigogine (Non-Equilibrium Thermodynamics), Boltzmann (Kinetic Theory), and Truesdell (Rational Mechanism) has been made to obtain a better understanding of the Navier-Stokes equation, which is now used extensively for chemically reacting flow treatment in combustion chambers. In addition to the study of the different concepts, two workshops were conducted to clarify some of the issues. The first workshop centered on Falk-Ruppel's new 'dynamics' concept, while the second one concentrated on Straub's AT. In this report brief summaries of the reviewed philosophies are presented and compared with the classical Navier-Stokes formulation in a tabular arrangement. Also the highlights of both workshops are addressed.

Wu, S. T.↗
NASA NTRS1985

Use of ground-based wind profiles in mesoscale forecasting

A brief review is presented of recent uses of ground-based wind profile data in mesoscale forecasting. Some of the applications are in real time, and some are after the fact. Not all of the work mentioned here has been published yet, but references are given wherever possible. As Gage and Balsley (1978) point out, sensitive Doppler radars have been used to examine tropospheric wind profiles since the 1970's. It was not until the early 1980's, however, that the potential contribution of these instruments to operational forecasting and numerical weather prediction became apparent. Profiler winds and radiosonde winds compare favorably, usually within a few m/s in speed and 10 degrees in direction (see Hogg et al., 1983), but the obvious advantage of the profiler is its frequent (hourly or more often) sampling of the same volume. The rawinsonde balloon is launched only twice a day and drifts with the wind. In this paper, I will: (1) mention two operational uses of data from a wind profiling system developed jointly by the Wave Propagation and Aeronomy Laboratories of NOAA; (2) describe a number of displays of these same data on a workstation for mesoscale forecasting developed by the Program for Regional Observing and Forecasting Services (PROFS); and (3) explain some interesting diagnostic calculations performed by meteorologists of the Wave Propagation Laboratory.

Schlatter, Thomas W.↗
NASA NTRS1993

Prediction of thermal cycling induced cracking in polymer matrix composites

This report summarizes the work done in the period February 1993 through July 1993 on the 'Prediction of Thermal Cycling Induced Cracking In Polymer Matrix Composites' program. An oral presentation of this work was given to Langley personnel in September of 1993. This document was prepared for archival purposes. Progress studies have been performed on the effects of spatial variations in material strength. Qualitative agreement was found with observed patterns of crack distribution. These results were presented to NASA Langley personnel in November 1992. The analytical methodology developed by Prof. McManus in the summer of 1992 (under an ASEE fellowship) has been generalized. A method for predicting matrix cracking due to decreasing temperatures and/or thermal cycling in all plies of an arbitrary laminate has been implemented as a computer code. The code also predicts changes in properties due to the cracking. Experimental progressive cracking studies on a variety of laminates were carried out at Langley Research Center. Results were correlated to predictions using the new methods. Results were initially mixed. This motivated an exploration of the configuration of cracks within laminates. A crack configuration study was carried out by cutting and/or sanding specimens in order to examine the distribution of cracks within the specimens. These investigations were supplemented by dye-penetrant enhanced X-ray photographs. The behavior of thin plies was found to be different from the behavior of thicker plies (or ply groups) on which existing theories are based. Significant edge effects were also noted, which caused the traditional metric of microcracking (count of cracks on a polished edge) to be very inaccurate in some cases. With edge and configuration taken into account, rough agreement with predictions was achieved. All results to date were reviewed with NASA Langley personnel in September 1993.

Mcmanus, Hugh L.↗
NASA NTRS1995

Thermal barrier coatings application in diesel engines

Commercial use of thermal barrier coatings in diesel engines began in the mid 70's by Dr. Ingard Kvernes at the Central Institute for Industrial Research in Oslo, Norway. Dr. Kvernes attributed attack on diesel engine valves and piston crowns encountered in marine diesel engines in Norwegian ships as hot-corrosion attributed to a reduced quality of residual fuel. His solution was to coat these components to reduce metal temperature below the threshold of aggressive hot-corrosion and also provide protection. Roy Kamo introduced thermal barrier coatings in his 'Adiabatic Diesel Engine' in the late 70's. Kamo's concept was to eliminate the engine block water cooling system and reduce heat losses. Roy reported significant performance improvements in his thermally insulated engine at the SAE Congress in 1982. Kamo's work stimulates major programs with insulated engines, particularly in Europe. Most of the major diesel engine manufacturers conducted some level of test with insulated combustion chamber components. They initially ran into increased fuel consumption. The German engine consortium had Prof. Woschni of the Technical Institute in Munich. Woschni conducted testing with pistons with air gaps to provide the insulation effects. Woschni indicated the hot walls of the insulated engine created a major increase in heat transfer he refers to as 'convection vive.' Woschni's work was a major factor in the abrupt curtailment of insulated diesel engine work in continental Europe. Ricardo in the UK suggested that combustion should be reoptimized for the hot-wall effects of the insulated combustion chamber and showed under a narrow range of conditions fuel economy could be improved. The Department of Energy has supported thermal barrier coating development for diesel engine applications. In the Clean Diesel - 50 Percent Efficient (CD-50) engine for the year 2000, thermal barrier coatings will be used on piston crowns and possibly other components. The primary purpose of the thermal barrier coatings will be to reduce thermal fatigue as the engine peak cylinder pressure will nearly be doubled. As the coatings result in higher available energy in the exhaust gas, efficiency gains are achieved through use of this energy by turbochargers, turbocompounding or thermoelectric generators.

Fairbanks, J. W.↗
NASA NTRS1997

Analysis of Impact Induced Damage and its Effect on Structural Integrity of Space Flight Composite Overwrapped Pressure Vessels

The objective of this research work has been to provide analytical background and support to the ongoing experimental program at NASA, White Sands Test Facility, involving testing composite overwrapped pressure vessels (COPV) for impact damage and cyclic pressurization. Preliminary theoretical basis, including the governing equations for a shallow shell subjected to internal pressure, has been established. Effects of the Griffith type cracks on the structural integrity of the cylindrical vessel were evaluated by methods of Fracture Mechanics. The results indicate that the effective mass of the pressure vessel is an important factor influencing the response to impact events. We also have found that the material properties of the target, contained in the constitutive equations of the composite attached to the Aluminum liner, dominate the impact event in the low velocity range, the material properties become less important, while the target mass distribution and the impactor mass become more significant as the velocity of the impactor increases. Therefore, at high-velocity impact it is not only the kinetic energy of the impactor but also its mass which has a significant effect on the dynamics of the event, and consequently on the induced damage. This work also suggests a methodology for an assessment of the rate of loading effects on the degradation of the material toughness associated with a high-velocity impact where the rate effects become significant. To model the rate dependence of the material response a viscoelastic-plastic constitutive equations were assumed, and on this basis predictions are made regarding the rate dependent material resistance curve. Other dynamic phenomena associated with the impact event have been treated in the framework of the Computational Mechanics using the courtesy of Prof. P. Guebelle and his graduate student at University of Illinois at Urbana-Champaign who have an access to a super-fast computer located on their campus. Finally, the guidelines for a follow-up research program are provided in the body of this report. They address three major areas: theoretical research, numerical studies, and further experimental work.

Wnuk, Michael P.↗
NASA NTRS1997

New Anti-Corrosive Coatings with Resin-Bonded Polyaniline and Related Electroactive Groups

It is already known that polyaniline (an electroactive polymer) functions as a corrosion inhibitor for steel and in view of the fact that it is known to perform in the presence of hydrochloric acid, it has been considered likely that it may be useful to NASA for protecting launch structures at KSC which are exposed to not only continual ocean-side salt spray but also to hydrochloric acid at the times that solid-fuel boosters are fired. The currently used zinc-rich silicate-bonded coating is not wholly protective against the hydrochloric acid. Water pollution from zinc salts is another concern. Other earlier and concurrent NASA sponsored projects have been focussed on polyaniline specifically. Our project, administered for NASA by Dr. K. Thompson of KSC and these more-specifically polyaniline-related projects are included in a CRADA coordinated by Dr. F. Via of Akzo Nobel. A parallel project at Polytechnic under Prof K. Levon concentrated more specifically on polyaniline with various dopants. Our exploratory project reported herein was aimed at broadening the range of such corrosion inhibitors, to give protective paint compounders a wider latitude for adding corrosion inhibitors having polyaniline-like performance, and thus we diverged in several probing directions from polyaniline. Our working hypothesis was that physical variants of polyaniline, such as supported formulations on pigments or carriers, and chemical variants of polyaniline, including those having no electroconductive character, may have enhanced anticorrosion activity. We also hypothesized that small (non-polymeric) molecules having structures related to those occurring in polyaniline, may be active as corrosion inhibitors. We did preliminary testing, using an ASTM salt spray method at a nearby commercial paint testing laboratory. Our most interesting findings were that a non-electroconductive meta-isomer of polyaniline showed some corrosion activity, suggesting that the features of the polyaniline molecule associated with conductivity are not necessary for the anticorrosion action. Also, signtficantly, small molecular weight aromatic diamines and diimines resembling the reduced and the oxidized repeating unit in polyaniline showed an interesting degree of anticorrosive activity, suggesting that the polymeric feature of polyaniline is not necessary for anticorrosion action.

Weil, Edward D.↗