Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pinch effect.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Charge-to-mass-ratio-dependent ion heating during magnetic reconnection in the MST RFP

Temperature evolution during magnetic reconnection has been spectroscopically measured for various ion species in a toroidal magnetized plasma. Measurements are made predominantly in the direction parallel to the equilibrium magnetic field. It is found that the increase in parallel ion temperature during magnetic reconnection events increases with the charge-to-mass ratio of the ion species. This trend can be understood if the heating mechanism is anisotropic, favoring heating in the perpendicular degree of freedom, with collisional relaxation of multiple ion species. The charge-to-mass ratio trend for the parallel temperature derives from collisional isotropization. This result emphasizes that collisional isotropization and energy transfer must be carefully modeled when analyzing ion heating measurements and comparing to theoretical predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of energetic electron confinement in a largely stochastic reversed-field pinch plasma

Runaway electrons with energies >100 keV are observed with the appearance of an m=1 magnetic island in the core of otherwise stochastic Madison Symmetric Torus [Dexter et al., Fusion Technol. 19, 131 (1991)] reversed-field-pinch plasmas. The island is associated with the innermost resonant tearing mode, which is usually the largest in the m=1 spectrum. The island appears over a range of mode spectra, from those with a weakly dominant mode to those, referred to as quasi single helicity, with a strongly dominant mode. In a stochastic field, the rate of electron loss increases with electron parallel velocity. Hence, high-energy electrons imply a region of reduced stochasticity. The global energy confinement time is about the same as in plasmas without high-energy electrons or an island in the core. Hence, the region of reduced stochasticity must be localized. Within a numerical reconstruction of the magnetic field topology, high-energy electrons are substantially better confined inside the island, relative to the external region. Therefore, it is deduced that the island provides a region of reduced stochasticity and that the high-energy electrons are generated and well confined within this region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Equilibrium evolution in oscillating-field current-drive experiments

Oscillating-field current drive (OFCD) is a proposed method of steady-state toroidal plasma sustainment in which ac poloidal and toroidal loop voltages are applied to produce a dc plasma current. OFCD is added to standard, inductively sustained reversed-field pinch plasmas in the Madison Symmetric Torus [R. N. Dexter et al., Fusion Technol. 19, 131 (1991)]. Equilibrium profiles and fluctuations during a single cycle are measured and analyzed for different relative phases between the two OFCD voltages and for OFCD off. For OFCD phases leading to the most added plasma current, the measured energy confinement is slightly better than that for OFCD off. By contrast, the phase of the maximum OFCD helicity-injection rate also has the maximum decay rate, which is ascribed to transport losses during discrete magnetic-fluctuation events induced by OFCD. Resistive-magnetohydrodynamic simulations of the experiments reproduce the observed phase dependence of the added current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

UCLA Tokamak Program Close Out Report

The results of UCLA experimental fusion program are summarized. Starting with smaller devices like Microtor, Macrotor, CCT and ending the research on the large (5 m) Electric Tokamak. CCT was the most diagnosed device for H-mode like physics and the effects of rotation induced radial fields. ICRF heating was also studied but plasma heating of University Type Tokamaks did not produce useful results due to plasma edge disturbances of the antennae. The Electric Tokamak produced better confinement in the seconds range. However, it presented very good particle confinement due to an "electric particle pinch". This effect prevented us from reaching a quasi steady state. This particle accumulation effect was numerically explained by Shaing's enhanced neoclassical theory. The PI believes that ITER will have a good energy confinement time but deleteriously large particle confinement time and it will disrupt on particle pinching at nominal average densities. The US fusion research program did not study particle transport effects due to its undue focus on the physics of energy confinement time. Energy confinement time is not an issue for energy producing tokamaks. Controlling the ash flow will be very expensive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic drift instabilities in high-beta plasma under conditions of a field reversed configuration

Electromagnetic drift instabilities are studied in the conditions of a field reversed configuration (FRC). Dispersion equation is based on the set of Vlasov-Maxwell equations taking into account nonadiabatic responses both of ions and electrons. Considered drift instabilities are caused by density and temperature gradients. It is assumed that magnetic field of the FRC is purely poloidal. Two kinds of magnetic field nonuniformity are considered: (i) perpendicular gradient due to high beta values (beta is the plasma pressure/magnetic pressure) and (ii) curvature of magnetic lines. There is low frequency drift instability existing for high-beta regimes. Modes of such instability can propagate transversally to the unperturbed magnetic field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Local measurements of tearing mode flows and the magnetohydrodynamic dynamo in the Madison Symmetric Torus reversed-field pinch

The first localized measurements of tearing mode flows in the core of a hot plasma are presented using nonperturbing measurements of the impurity ion flow. Emission from charge exchange recombination is collected by a novel high optical throughput duo spectrometer providing localized ({+-}1 cm) measurements of C{sup +6} impurity ion velocities resolved to <500 m/s with high bandwidth (100 kHz). Poloidal tearing mode flows in the Madison Symmetric Torus reversed-field pinch are observed to be localized to the mode resonant surface with a radial extent much broader than predicted by linear magnetohydrodynamic (MHD) theory but comparable to the magnetic island width. The relative poloidal flow amplitudes among the dominant core modes do not reflect the proportions of the magnetic amplitudes. The largest correlated flows are associated with modes having smaller magnetic amplitudes resonant near the midradius. The MHD dynamo due to these flows on the magnetic axis is measured to be adequate to balance the mean Ohm's law during reduced tearing activity and is significant but does not exclude other dynamo mechanisms from contributing during a surge in reconnection activity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional equilibria and transport in RFX-mod: A description using stellarator tools

RFX-mod self-organized single helical axis (SHAx) states provide a unique opportunity to advance 3D fusion physics and establish a common knowledge basis in a parameter region not covered by stellarators and tokamaks. The VMEC code has been adapted to the reversed-field pinch (RFP) to model SHAx equilibria in fixed boundary mode with experimental measurements as constraint. The averaged particle diffusivity over the helical volume, estimated with the Monte Carlo code ORBIT, has a neoclassical-like dependence on collisionality and does not show the 1/{nu} trend of un-optimized stellarators. In particular, the helical region boundary, corresponding to an electron transport barrier with zero magnetic shear and improved confinement, has been investigated using numerical codes common to the stellarator community. In fact, the DKES/PENTA codes have been applied to RFP for local neoclassical transport computations, including radial electric field, to estimate thermal diffusion coefficients in the barrier region for typical RFX-mod temperature and density profiles. A comparison with power balance estimates shows that residual chaos due to secondary tearing modes and small-scale turbulence still contribute to drive anomalous transport in the barrier region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of toroidal phasing of resonant magnetic perturbation effects on edge transport in the DIII-D tokamak

Resonant Magnetic Perturbation (RMP) fields produced by external control coils are considered a viable option for the suppression of Edge Localized Modes in present and future tokamaks. In DIII-D, the RMPs are generated by six pairs of I-coils, each spanning 60° in toroidal angle, with the currents flowing in opposite directions in adjacent pairs of I-coils. Reversal of the currents in all I-coils, which produces a 60° toroidal shift in the RMP field configuration, generates uniquely different edge pedestal profiles of the density, temperature, and rotation velocities, implying different effects on the related edge transport phenomena caused by the difference in toroidal phase of the I-coil currents. The diffusive and non-diffusive transport effects of this RMP toroidal phase reversal are analyzed by comparing the ion and electron heat diffusivities, angular momentum transport frequencies, ion diffusion coefficients, and the particle pinch velocities interpreted from the measured profiles for the two phases of the I-coil currents.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional effects on energetic particle confinement and stability

Energetic particle populations in magnetic confinement systems are sensitive to symmetry-breaking effects due to their low collisionality and long confined path lengths. Broken symmetry is present to some extent in all toroidal devices. As such effects preclude the existence of an ignorable coordinate, a fully three-dimensional analysis is necessary, beginning with the lowest order (equilibrium) magnetic fields. Three-dimensional techniques that have been extensively developed for stellarator configurations are readily adapted to other devices such as rippled tokamaks and helical states in reversed field pinches. This paper will describe the methods and present an overview of recent examples that use these techniques for the modeling of energetic particle confinement, Alfven mode structure and fast ion instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

System studies of rf current drive for MST

Two rf schemes are being studied on the MST reversed field pinch for their potential in current profile control experiments. MHD modeling has shown that a substantial externally-driven off axis parallel current can improve stability of the dominant core tearing modes. A radially localized axisymmetric population of fast electrons has been observed by SXR emission during LH injection (100kW at 800MHz), and is consistent with CQL3D modeling which predicts a small driven current. Computational work suggests that doubling the input power will statistically improve the LH-induced SXR signal to background ratio, and that about 2MW of injected power (an order of magnitude increase) will drive enough current for stabilization of tearing modes. Additionally, a 1 MW 5.5 GHz electron Bernstein wave (EBW) experiment is under construction, which utilizes a very simple and compact antenna compatible with the demands of the RFP. EBW allows access to electron cyclotron heating and current drive in the overdense plasma. Coupling of the external electromagnetic wave to the EBW has been demonstrated, and initial tests at {approx}100kW power have produced a small, localized xray flux consistent with rf heating and high diffusivity of fast electrons. Computational work is currently underway to answer the very important questions of how much power is required, and what level of electron diffusivity is tolerable, to generate a consequential amount of EBW current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of Edge and Internal Transport Barriers in Drift Wave Predictive Simulations

We have simulated the formation of an internal transport barrier on JET including a self-consistent treatment of ion and electron temperatures and poloidal and toroidal momentum.Similar simulations of edge transport barriers, including the L-H transition have also been made. However, here only poloidal momentum and the temperatures were simulated. The internal barrier included an anomalous spinup of poloidal momentum similar to that in the experiment. Also the edge barrier was accompanied by a spinup of poloidal momentum. The experimental density (with no barrier) was used and kept fixed for the internal barrier. For the edge barrier the edge density was varied and it turned out that a lower edge density gave a stronger barrier. Electromagnetic and nonlocal effects were important for both types of barriers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrokinetic study of electromagnetic effects on toroidal momentum transport in tokamak plasmas

The effect of a finite {beta}{sub e} = 8{pi}n{sub e}T{sub e}/B{sup 2} on the turbulent transport of toroidal momentum in tokamak plasmas is discussed. From an analytical gyrokinetic model as well as local linear gyrokinetic simulations, it is shown that the modification of the parallel mode structure due to the nonadiabatic response of passing electrons, which changes the parallel wave vector k{sub ||} with increasing {beta}{sub e}, leads to a decrease in size of both the diagonal momentum transport as well as the Coriolis pinch under ion temperature gradient turbulence conditions, while for trapped electron modes, practically no modification is found. The decrease is particularly strong close to the onset of the kinetic ballooning modes. There, the Coriolis pinch even reverses its direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ionic debris measurement of three extreme ultraviolet sources

Generation of debris in extreme ultraviolet (EUV) light sources is an inherent and real threat to the lifetime of collection optics. Debris measurement of these sources is useful to enable source suppliers to estimate collector lifetime. At the Center for Plasma Material Interactions (CPMI) at the University of Illinois, an Illinois calibrated spherical sector electrostatic energy analyzer (ICE) was built to measure the ion debris flux in absolute units. In addition to ion flux, the detector is also capable of identifying different ion species present in the plasma utilizing energy-to-charge ratio discrimination. The lifetime of the collector optics is calculated using the measured ion flux. In the current investigation we compare the measurement of ion debris production in three different EUV sources: the Energetiq EQ-10M, the AIXUV-100, and the XTREME XTS 13-35. In the EQ-10M source, three angular measurements are coupled with three variations in operating pressure to measure consequent effects on debris production. These measurements reveal four predominant ion species in the energetic debris analysis: C{sup +}, Si{sup +}, Xe{sup +}, and Xe{sup 2+}. The amount of debris is reduced as pressure is increased. Various debris mitigation methods are implemented in the AIXUV-100 source and results reveal that four ion species are observed (Ar{sup +}, Xe{sup +}, Xe{sup 2+}, and W{sup +}), though there does not seem to be a dominant species. The first mitigation technique, backstreaming argon toward the source, reduces the amount of Ar{sup +}, Xe{sup 2+}, and W{sup +}, yet increases the amount of Xe{sup +} The increase in Xe{sup +} flux is explained based on charge exchange phenomena. The ICE machine was then attached 1.92 m away from the pinch of XTS 13-35 source, and placed at 25 deg. away from the normal line. The comparison of results reveals that the XTS 13-35 and the EQ-10M sources produced comparable amounts of energetic ion flux per watt of EUV light produced. The AIXUV-100 source generated more ion debris flux per watt of EUV light than the other two sources, though it should be noted that the AIXUV-100 source was capable of producing more than ten times the amount of EUV light power compared to any of the other sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlling Catalyst–Semiconductor Contacts: Interfacial Charge Separation in p-InP Photocathodes

Charge-carrier-selective interfaces between electrocatalyst particles and semiconductor light absorbers are critical for solar photochemistry but controlling their properties is challenging. Using thin films and nanoparticle arrays of Pt hydrogen-evolution catalysts on p-InP (a high-performance photocathode material), along with macroscopic and nanoscopic electrical and chemical analysis, we show how hydrogen alloying, the pinch-off effect for nanoscale contacts, and the formation of a native surface oxides all play different roles in creating charge-carrier-selective junctions. As a result, the new insights can be broadly applied to photocathodes, photoanodes, and overall water-splitting systems to control charge-carrier selectivity and improve performance.

14 SOLAR ENERGY↗

High brightness extreme ultraviolet (at 13.5 nm) emission from time-of-flight controlled discharges with coaxial fuel injection

Extreme ultraviolet (EUV) emission from discharge produced plasma with the coaxial injection of fuel vapor (tin and lithium) produced by laser ablation is experimentally studied. Multiple plasma pinches preceding a strong and long recombination radiation of EUV are observed in the first half cycle of a sinusoidal discharge current. Due to the time-of-flight control type of the discharge, the shape of pinch radiation pulses is almost identical. With the coaxial injection of time-of-flight controlled discharges, the highest brightness of EUV emission (maximum extracted energy of 244.3 mJ/2{pi} sr per pulse with the emitter size of {approx}1x0.3 mm{sup 2} in full width at half maximum) is provided with efficiency exceeding 2% of deposited energy into the plasma (or 1% of dissipated energy in the discharge) due to a much better matching with the optimal plasma parameters in the recombination regime and a decrease in the off-duty factor. Stability of emitting plasma of the repetitive pinches is essentially improved with use of a second laser pulse.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of single pinched plasma point in the cathode plasma jet of a multipicosecond laser-triggered vacuum discharge

Characteristics of cathode plasma jet pinching and x-ray emission from a multipicosecond laser-triggered vacuum discharge are presented. Discharge was created in between a planar Al cathode and a conical point-tip Ti anode (separation: 2-15 mm, circuit inductance of {approx}0.53 {mu}H, peak discharge current of {approx}3 kA, and rise time of {approx}400 ns). For anode-cathode separation of {approx}13.5 mm, only a single pinched plasma point was formed in the cathode plasma jet at a distance of {approx}9.5 mm from the cathode. Quantitative analysis of the x-ray signals recorded using a pin diode with different filters and viewing different regions of the discharge, shows soft ({approx}keV photon energy) x-ray emission from the plasma point with a flux of {approx}(3-5)x10{sup 10} photons/sr, and multi-keV x-ray emission from the Ti anode with K{alpha} ({approx}4.51 keV) photon flux of {approx}10{sup 10} photons/sr.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bright spots in 1 MA X pinches as a function of wire number and material

Bright, intense x-ray sources with extreme plasma parameters (micropinch plasmas) have previously been characterized at 0.1-0.4 MA, but the scaling of such sources at higher current is poorly understood. The x-ray source size and radiation power of 1 MA X pinches were studied as a function of wire material (Al, Ti, Mo, and W) and number (1-, 2-, 8-, 32-, and 64-wire configurations). The smallest bright spots observed were from 32-wire tungsten X pinches, which produced {<=}11-16 {mu}m, {approx}2 J, 1-10 GW sources of 3-5 keV radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗