SEARCH · Engineering Papers

Results for “Pb(SN)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Diamine chelates for increased stability in mixed Sn–Pb and all-perovskite tandem solar cells

Perovskite tandem solar cells show promising performance but non-radiative recombination and its progressive worsening with time, especially in the mixed Sn–Pb low-bandgap layer, limit performance and stability. Here, in this study, we find that mixed Sn–Pb perovskite thin films exhibit a compositional gradient, with an excess of Sn on the surface – and we show this gradient exacerbates oxidation and increases the recombination rate. We find that diamines preferentially chelate Sn atoms, removing them from the film surface and achieving a more balanced Sn:Pb stoichiometry, making the surface of the film resistive to the oxidation of Sn. The process forms an electrically resistive low-dimensional barrier layer, passivating defects and reducing interface recombination. Further improving the homogeneity of the barrier layer using 1,2-diaminopropane results in more uniform distribution and passivation. Tandems achieve a power conversion efficiency of 28.8%. As a result, encapsulated tandems retain 90% of initial efficiency following 1000 hours of operating at the maximum power point under simulated one-sun illumination in air without cooling.

14 SOLAR ENERGY↗

DOE OSTI2024

Intrinsically sodiophilic, mesoporous metal-free wetting layers based on inexpensive carbon black for sodium-metal batteries

In this article, elevated temperature molten Na batteries are seeing a resurgence of interest for low-cost electrochemical energy storage for the grid. Of the many recent innovations in this battery concept, new methods focused on intermediate temperature operation (e.g. 110–190 °C) have gained prominence as a way to enable comparable performance with less thermal energy loss and lower-cost materials of construction. However, the poor wettability of molten Na on suitable solid-electrolyte separators such as sodium Beta Alumina Solid-Electrolyte (Na-β”-Al 2 O 3 , ‘BASE’) requires continued innovation in interface engineering to promote full utilization of the solid-electrolyte surface area and minimize cell resistance. There have been many successful approaches to improve Na-wettability to-date including heat treatment in an inert atmosphere to remove adsorbed surface species, deposition of alloying metals such as Pb, Sn, or Bi, and use of carbon-based interfacial layers. However, these approaches either lack the ability to provide good wetting at very low temperatures (near the melting point of Na) or rely on non-scalable processes and/or toxic/expensive metals. To solve these issues, a new carbon-based sodiophilic treatment is demonstrated, which utilizes inexpensive components to form a meso/macroporous sodiophilic layer, is easily applied via drop-casting or spray-coating, provides excellent wetting as low as 110 °C, and is completely metal-free. It is found that the good sodium wetting can be attributed to the wider range of pore sizes in the carbon layers demonstrated in this study. Na wetting may occur as surface tension is initially broken by larger pores, followed by the intrusion of molten Na into smaller pores due to the apparent intrinsic affinity of Na-metal for carbon surfaces, in conjunction with the capillarity effect. Low cell-level area specific resistances of 20–30 and 13–15 Ω·cm 2 are demonstrated at 110 and 140 °C respectively. Finally, the utility of this metal-free wetting layer for solid-Na anodes is explored, showing that the metal-free wetting layer can reach a critical current density of 1.88 mA·cm -2 at 30 °C.

25 ENERGY STORAGE↗

DOE OSTI2024

Machine Learning-Guided Exploration of Ternary Metal Borohydrides

We employ deep machine learning (ML) combined with first-principles calculations to explore energetically favorable ternary metal borohydrides. Using La–B–H as a prototype system, we demonstrate that iteratively trained ML models can efficiently screen hundreds of thousands of hypothetical structures and accurately select a small fraction of promising structures and compositions for further studies by first-principles calculations. Such an ML-guided approach dramatically accelerates the pace of materials discovery. A number of new La–B–H ternary compounds with formation energies within 100 meV/atom above the known ternary convex hull are discovered, including a known stable La(BH 4 ) 3 phase. Moreover, by replacing La with Group 1, 2, 3, 13, and 14 elements in the four lowest-energy La–B–H structures from our ML-guided predictions, several low-energy X–B-H (X = Mg, Ca, Sr, Ba, Sc, Y, Ac, Al, Ga, In, Si, Ge, Sn, Pb) compounds are predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Materials Data on Sn2PbSe3 by Materials Project

PbSn2Se3 is Caswellsilverite-like structured and crystallizes in the trigonal P-3m1 space group. The structure is three-dimensional. Pb2+ is bonded to six equivalent Se2- atoms to form PbSe6 octahedra that share corners with six equivalent SnSe6 octahedra, edges with six equivalent PbSe6 octahedra, and edges with six equivalent SnSe6 octahedra. The corner-sharing octahedral tilt angles are 2°. All Pb–Se bond lengths are 3.09 Å. Sn2+ is bonded to six Se2- atoms to form SnSe6 octahedra that share corners with three equivalent PbSe6 octahedra, corners with three equivalent SnSe6 octahedra, edges with three equivalent PbSe6 octahedra, and edges with nine equivalent SnSe6 octahedra. The corner-sharing octahedra tilt angles range from 0–2°. There are three shorter (3.03 Å) and three longer (3.04 Å) Sn–Se bond lengths. There are two inequivalent Se2- sites. In the first Se2- site, Se2- is bonded to three equivalent Pb2+ and three equivalent Sn2+ atoms to form a mixture of corner and edge-sharing SeSn3Pb3 octahedra. The corner-sharing octahedral tilt angles are 0°. In the second Se2- site, Se2- is bonded to six equivalent Sn2+ atoms to form a mixture of corner and edge-sharing SeSn6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗

DOE OSTI2022

“Breathing” organic cation to stabilize multiple structures in low-dimensional Ge-, Sn-, and Pb-based hybrid iodide perovskites

Low-dimensional hybrid inorganic–organic perovskites are excellent candidates for stable optoelectronic devices. The dimensionality of these perovskites depends largely on the organic and inorganic compositions, as well as the synthetic conditions. We report five new hybrid iodides, (ETU) 4 Ge 5 I 18 , (ETU)GeI 4 , (ETU)SnI 4 , (ETU)PbI 4 , and (ETU) 3 Pb 2 I 10 using only one type of organic cation, namely, S-(2-aminoethyl)isothiouronium (ETU). (ETU)GeI 4 and (ETU)SnI 4 belong to the (110)-oriented structure-type with “3 × 3” sawtooth corrugated layers and crystallize in a structure with the orthorhombic space group Pbca. (ETU) 4 Ge 5 I 18 crystallizes in a structure with the triclinic space group P$\bar{1}$with combining macron], featuring a 2D layered structure with combinations of corner, edge, and face-sharing [GeI 6 ] octahedra. For the Pb-based series, (ETU)PbI 4 has the conventional (100) – oriented 2D type whereas (ETU) 3 Pb 2 I 10 has a unique 0D structure. Remarkably, the unstable 2D orange-phase (ETU)PbI 4 transforms to a stable 0D yellow phase (ETU) 3 Pb 2 I 10 , accompanied by the reduction of the C–S–C angle of the organic cation ETU. The optical band gaps are largely regulated by the diverse types of structure and are in the range of 1.8 eV to 2.8 eV. (ETU)SnI 4 is the only material showing notable photoluminescence at room-temperature. Our work showcases the flexibility of the organic cation in determining the structural dimensionality and provides a new strategy in generating new hybrid materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Materials Data on Sn2Sb2Pb4O13 by Materials Project

Pb4Sn2Sb2O13 crystallizes in the orthorhombic Imm2 space group. The structure is three-dimensional. there are two inequivalent Pb2+ sites. In the first Pb2+ site, Pb2+ is bonded to seven O2- atoms to form distorted PbO7 hexagonal pyramids that share corners with three PbO7 hexagonal pyramids, edges with three PbO7 hexagonal pyramids, edges with two equivalent SnO6 octahedra, and edges with four equivalent SbO6 octahedra. There are a spread of Pb–O bond distances ranging from 2.32–2.72 Å. In the second Pb2+ site, Pb2+ is bonded to seven O2- atoms to form distorted PbO7 hexagonal pyramids that share corners with three PbO7 hexagonal pyramids, edges with three PbO7 hexagonal pyramids, edges with two equivalent SbO6 octahedra, and edges with four equivalent SnO6 octahedra. There are a spread of Pb–O bond distances ranging from 2.35–2.69 Å. Sn4+ is bonded to six O2- atoms to form SnO6 octahedra that share corners with two equivalent SnO6 octahedra, corners with four equivalent SbO6 octahedra, and edges with six PbO7 hexagonal pyramids. The corner-sharing octahedra tilt angles range from 45–49°. There are a spread of Sn–O bond distances ranging from 2.07–2.11 Å. Sb5+ is bonded to six O2- atoms to form SbO6 octahedra that share corners with two equivalent SbO6 octahedra, corners with four equivalent SnO6 octahedra, and edges with six PbO7 hexagonal pyramids. The corner-sharing octahedra tilt angles range from 42–46°. There are a spread of Sb–O bond distances ranging from 2.00–2.04 Å. There are seven inequivalent O2- sites. In the first O2- site, O2- is bonded in a 4-coordinate geometry to two equivalent Pb2+ and two equivalent Sn4+ atoms. In the second O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Pb2+ and two equivalent Sb5+ atoms. In the third O2- site, O2- is bonded in a 2-coordinate geometry to two Pb2+, one Sn4+, and one Sb5+ atom. In the fourth O2- site, O2- is bonded in a 4-coordinate geometry to two equivalent Pb2+ and two equivalent Sn4+ atoms. In the fifth O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Pb2+ and two equivalent Sb5+ atoms. In the sixth O2- site, O2- is bonded in a 4-coordinate geometry to two Pb2+, one Sn4+, and one Sb5+ atom. In the seventh O2- site, O2- is bonded in a tetrahedral geometry to four Pb2+ atoms.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Machine Learning-Guided Discovery of Ternary Compounds Containing La, P, and Group 14 Elements

In this work, we integrate a deep machine learning (ML) method with first-principles calculations to efficiently search for the energetically favorable ternary compounds. Using La–Si–P as a prototype system, we demonstrate that ML-guided first-principles calculations can efficiently explore crystal structures and their relative energetic stabilities, thus greatly accelerate the pace of material discovery. A number of new La–Si–P ternary compounds with formation energies less than 30 meV/atom above the known ternary convex hull are discovered. Among them, the formation energies of La 5 SiP 3 and La 2 SiP phases are only 2 and 10 meV/atom, respectively, above the convex hull. These two compounds are dynamically stable with no imaginary phonon modes. Moreover, by replacing Si with heavier-group 14 elements in the eight lowest-energy La–Si–P structures from our ML-guided predictions, a number of low-energy La–X–P phases (X = Ge, Sn, Pb) are predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRSDate not supplied

Effect of Pressure and Oxidation State on Pnictogen Metal-Silicate Partitioning

The partitioning of trace elements between metal and silicate melts serves as the foundation for understanding the differentiation of a planetary body into a metallic core and silicate mantle. Element activity influences metal-silicate partitioning behavior. Activity coefficients are directly dependent on composition and temperature, and can be indirectly dependent on oxygen fugacity and pressure. Distinguishing the effect of pressure from other variables on the activity coefficients and partitioning is important for understanding the chemical evolution of different planetary bodies during differentiation. In this study, we investigated the influence of pressure on the activity coefficients of Cu, Mo, Pd, Pt, As, Sb, and Bi in Fe-Si metallic liquids. All of these elements exhibit moderate to high activity coefficients in Fe-Si liquids at low pressure, which significantly controls their metal-silicate partitioning behavior. Identifying whether this strong dependence persists at higher pressures is critical to modeling and understanding the chemical consequences of core formation. New experiments at 10 GPa were used to derive activity coefficients for these metals which can be compared to activity coefficients determined at 1 GPa. Experiments were conducted at 10 GPa and 2373K using a 10/5 assembly in the 880-ton multi anvil press at NASA Johnson Space Center. The standard 10/5 COMPRES assembly was slightly modified to accommodate a sample capsule machined from single-crystal MgO that minimizes melt percolation out of the sample volume during the experiment. Experiment starting materials were comprised of 70 wt.% Knippa basalt and 30 wt.% metal. The metal mixture (~85 wt.% Fe) was created by adding the elements of interest (Cu, Mo, Pd, Pt, As, Sb, Bi) to Fe metal powder. Varied amounts of Si metal (0-10 wt.% Si) were added to the metal-silicate mixtures to generate a systematic series of starting materials. For each element, an epsilon interaction parameter in Fe-Si liquid was derived from the results of our 0-10 wt.% Si metal series. To investigate whether pressure influences the trace element activity coefficients in the 1-10 GPa pressure range, we compared our results at 10 GPa to those at 1-4 GPa [1-3]. Our results can also be directly compared to interaction parameters for Au, P, V, Mn, Ga, Zn, Cd, Sn, W, Pb, and Nb previously determined at 10 GPa and 2373K following the same methods [4]. Combined, this suite of interaction parameters will directly inform metal- silicate partitioning between 1 and 10 GPa, and assess whether these values can be extrapolated to modeling differentiation processes at pressures >10 GPa. [1] Righter et al. (2018) GCA 232, 101-123 [2] Righter et al. (2019) MaPS 54, 1379-1394 [3] Steenstra et al. (2020) Icarus, 335, 113391 [4] Righter et al. (2020) Geochem. Persp. Let. 15, 44-49

Kelsey Prissel↗

DOE OSTI2020

Relaxor behavior and electrothermal properties of Sn- and Nb-modified (Ba,Ca)TiO 3 Pb-free ferroelectric

Relaxor ferroelectrics have drawn attention for possible applications in solid-state cooling and thermal energy harvesting, owing to their electrothermal energy conversion properties. Here, we have synthesized and characterized the structure–property correlations of a new Sn- and Nb-doped (Ba,Ca)TiO 3 relaxor ferroelectric with large pyroelectric and electrocaloric effects over a broad temperature range. We observed two peaks for the temperature-dependent pyroelectric coefficient: (i) -(∂P/∂T) ~ 563 µC/(m 2 K) at T~ 270 K and (ii) -(∂P/∂T) ~ 1021 µC/(m 2 K) at T~ 320 K. In addition, a broad peak for electrocaloric temperature change is observed near 320 K with a relative cooling power of ~17 J/kg. These properties could be correlated to structural changes observed using X-ray diffraction at two different temperature ranges in the material. Analysis of high-energy X-ray scattering and specific heat capacity data revealed a transition from the cubic to tetragonal phase near T m ~ 320 K, whereas an additional increase in the tetragonality (c/a) of the polar phase is observed below T s ~ 270 K.

36 MATERIALS SCIENCE↗

NASA NTRS1988

Ostwald ripening in a system with a high volume fraction of coarsening phase

The coarsening of Sn-rich and Pb-rich solid phases in contact with eutectic liquid in the volume fraction solid range above approximately 0.6, where the development of a solid skeletal structure inhibits sedimentation, is investigated. Particle intercept distributions are shown to be time independent when scaled by the average intercept. It is noted that the coarsening rate constants obtained exceed the values calculated from theory by factors ranging from about 2 to 5.

Hardy, S. C.↗

NASA NTRS1982

Solidification mechanism of highly undercooled metal alloys

Experiments were conducted on metal droplet undercooling, using Sn-25wt%Pb and Ni-34wt%Sn alloys. To achieve the high degree of undercooling, emulsification treatments were employed. Results show the fraction of supersaturated primary phase is a function of the amount of undercooling, as is the fineness of the structures. The solidification behavior of the tin-lead droplets during recalescence was analyzed using three different hypotheses; (1) solid forming throughout recalescence is of the maximum thermodynamically stable composition; (2) partitionless solidification below the T sub o temperature, and solid forming thereafter is of the maximum thermodynamically stable composition; and (3) partitionless solidification below the T sub o temperature with solid forming thereafter that is of the maximum thermodynamically metastable composition that is possible. The T sub o temperature is calculated from the equal molar free energies of the liquid solid using the regular solution approximation.

Shiohara, Y.↗

NASA NTRS2004

Thermally Conductive Metal-Tube/Carbon-Composite Joints

An improved method of fabricating joints between metal and carbon-fiber-based composite materials in lightweight radiators and heat sinks has been devised. Carbon-fiber-based composite materials have been used in such heat-transfer devices because they offer a combination of high thermal conductivity and low mass density. Metal tubes are typically used to carry heat-transfer fluids to and from such heat-transfer devices. The present fabrication method helps to ensure that the joints between the metal tubes and the composite-material parts in such heat-transfer devices have both (1) the relatively high thermal conductances needed for efficient transfer of heat and (2) the flexibility needed to accommodate differences among thermal expansions of dissimilar materials in operation over wide temperature ranges. Techniques used previously to join metal tubes with carbon-fiber-based composite parts have included press fitting and bonding with epoxy. Both of these prior techniques have been found to yield joints characterized by relatively high thermal resistances. The present method involves the use of a solder (63 percent Sn, 37 percent Pb) to form a highly thermally conductive joint between a metal tube and a carbon-fiber-based composite structure. Ordinarily, the large differences among the coefficients of thermal expansion of the metal tube, solder, and carbon-fiber-based composite would cause the solder to pull away from the composite upon post-fabrication cooldown from the molten state. In the present method, the structure of the solder is modified (see figure) to enable it to deform readily to accommodate the differential thermal expansion.

Copeland, Robert J.↗

NASA NTRS2004

Volatile Element Geochemistry in the Lower Atmosphere of Venus

We computed equilibrium abundances of volatile element compounds as a function of altitude in Venus lower atmosphere. The elements included are generally found in volcanic gases and sublimates on Earth and may be emitted in volcanic gases on Venus or volatilized from its hot surface. We predict: 1) PbS, Bi2S3, or possibly a Pb-Bi sulfosalt are the radar bright heavy metal frost in the Venusian highlands; 2) It should be possible to determine Venus' age by Pb-Pb dating of PbS condensed in the Venusian highlands, which should be a representative sample of Venusian lead; 3) The gases HBr, PbCl2, PbBr2, As4O6, As4S4, Sb4O6, BiSe, InBr, InCl, Hg, TlCl, TlBr, SeS, Se2-7, HI, I, I2, ZnCl2, and S2O have abundances greater than 0.1 ppbv in our nominal model and may be spectroscopically observable; 4) Cu, Ag, Au, Zn, Cd, Ge, and Sn are approx. 100 % condensed at the 740 K (0 km) level on Venus.

Schaefer, L.↗

DOE OSTI2023

Light–Induced Frenkel Defect Pair Formation Can Lead to Phase–Segregation of Otherwise Miscible Halide Perovskite Alloys

Alloys of ABX 3 halide perovskites (HP) exhibit unique phase behavior compared to traditional III-V and II-VI semiconductor alloys used in solar cells. While the latter typically have good mutual miscibility when their mixed components are size matched, and phase-segregate when size mismatched, HP alloys show good miscibility in the dark but can phase-segregate under light. Quantum mechanical calculations described herein reveal light-induced defect formation and migration hold the key. Specifically, the interaction between a halogen vacancy V X with halogen interstitial X i forming together a Frenkel-pair defect emerges as the enabler for phase-segregation in HP alloys. At a threshold bromine composition in the Br-I alloys, the photogenerated holes in the valence band localize, creating thereby a doubly-charged iodine Frenkel-pair (V I + I i ) 2+ . Faster migration of iodine over bromine interstitial into the vacant iodine V I site leads to the formation of iodine-rich and iodine-depleted regions, establishing phase-segregation. Removal of the mobile defects–the agent of segregation–by dark thermal annealing, supplies the opposing force, leading to reversal of phase-segregation. Furthermore, this atomistic understanding can enable some control of the phase-segregation by selecting substituting elements on the B site–such as replacing some Pb by Sn–that are unable to form stable Frenkel defects.

14 SOLAR ENERGY↗

DOE OSTI2020

Materials Data on Ho2Sn3(PbS4)3 by Materials Project

Ho2Pb3Sn3S12 crystallizes in the orthorhombic Pmc2_1 space group. The structure is three-dimensional. there are two inequivalent Ho3+ sites. In the first Ho3+ site, Ho3+ is bonded to seven S2- atoms to form distorted HoS7 pentagonal bipyramids that share corners with two equivalent SnS6 octahedra, edges with four SnS6 octahedra, and edges with two equivalent HoS7 pentagonal bipyramids. The corner-sharing octahedral tilt angles are 49°. There are a spread of Ho–S bond distances ranging from 2.77–2.84 Å. In the second Ho3+ site, Ho3+ is bonded in a 8-coordinate geometry to eight S2- atoms. There are a spread of Ho–S bond distances ranging from 2.82–3.08 Å. There are three inequivalent Pb2+ sites. In the first Pb2+ site, Pb2+ is bonded in a 8-coordinate geometry to eight S2- atoms. There are a spread of Pb–S bond distances ranging from 2.97–3.29 Å. In the second Pb2+ site, Pb2+ is bonded in a 7-coordinate geometry to seven S2- atoms. There are a spread of Pb–S bond distances ranging from 2.93–3.27 Å. In the third Pb2+ site, Pb2+ is bonded in a 8-coordinate geometry to eight S2- atoms. There are a spread of Pb–S bond distances ranging from 2.91–3.23 Å. There are three inequivalent Sn4+ sites. In the first Sn4+ site, Sn4+ is bonded to six S2- atoms to form SnS6 octahedra that share corners with two equivalent HoS7 pentagonal bipyramids, edges with two equivalent SnS6 octahedra, and edges with two equivalent HoS7 pentagonal bipyramids. There are a spread of Sn–S bond distances ranging from 2.54–2.63 Å. In the second Sn4+ site, Sn4+ is bonded to six S2- atoms to form SnS6 octahedra that share edges with two equivalent SnS6 octahedra and edges with two equivalent HoS7 pentagonal bipyramids. There are a spread of Sn–S bond distances ranging from 2.54–2.65 Å. In the third Sn4+ site, Sn4+ is bonded to five S2- atoms to form corner-sharing SnS5 trigonal bipyramids. There are a spread of Sn–S bond distances ranging from 2.45–2.58 Å. There are twelve inequivalent S2- sites. In the first S2- site, S2- is bonded in a 4-coordinate geometry to one Ho3+, one Pb2+, and two equivalent Sn4+ atoms. In the second S2- site, S2- is bonded in a 3-coordinate geometry to two equivalent Ho3+, two equivalent Pb2+, and one Sn4+ atom. In the third S2- site, S2- is bonded in a distorted single-bond geometry to four Pb2+ and one Sn4+ atom. In the fourth S2- site, S2- is bonded in a 3-coordinate geometry to two equivalent Ho3+, two equivalent Pb2+, and one Sn4+ atom. In the fifth S2- site, S2- is bonded in a 4-coordinate geometry to one Ho3+, one Pb2+, and two equivalent Sn4+ atoms. In the sixth S2- site, S2- is bonded in a 3-coordinate geometry to two equivalent Ho3+, two equivalent Pb2+, and one Sn4+ atom. In the seventh S2- site, S2- is bonded to one Ho3+, one Pb2+, and two equivalent Sn4+ atoms to form distorted corner-sharing SHoSn2Pb trigonal pyramids. In the eighth S2- site, S2- is bonded in a 5-coordinate geometry to four Pb2+ and one Sn4+ atom. In the ninth S2- site, S2- is bonded in a 2-coordinate geometry to one Ho3+, one Pb2+, and two equivalent Sn4+ atoms. In the tenth S2- site, S2- is bonded in a 5-coordinate geometry to two equivalent Ho3+, two equivalent Pb2+, and one Sn4+ atom. In the eleventh S2- site, S2- is bonded in a 3-coordinate geometry to two equivalent Ho3+, two equivalent Pb2+, and one Sn4+ atom. In the twelfth S2- site, S2- is bonded in a 4-coordinate geometry to one Ho3+, one Pb2+, and two equivalent Sn4+ atoms.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Probing elemental diffusion and radiation tolerance of perovskite solar cells via non-destructive Rutherford backscattering spectrometry

Mixed organic–inorganic halide perovskite-based solar cells have attracted interest in recent years due to their potential for both terrestrial and space applications. Analysis of interfaces is critical to predicting device behavior and optimizing device architectures. Most advanced tools to study buried interfaces are destructive in nature and can induce further degradation. Ion beam techniques, such as Rutherford backscattering spectrometry (RBS), is a useful non-destructive method to probe an elemental depth profile of multilayered perovskite solar cells (PSCs) as well as to study the inter-diffusion of various elemental species across interfaces. Additionally, PSCs are becoming viable candidates for space photovoltaic applications, and it is critical to investigate their radiation-induced degradation. RBS can be simultaneously utilized to analyze the radiation effects induced by He+ beam on the device, given their presence in space orbits. In the present work, a 2 MeV He+ beam was used to probe the evidence of elemental diffusion across PSC interfaces with architecture glass/ITO/SnO2/Cs0.05(MA0.17FA0.83)0.95Pb(I0.83Br0.17)3/spiro-OMeTAD/MoO3/Au. During the analysis, the device active area was exposed to an irradiation equivalent of up to 1.62 × 1015 He+/cm2, and yet, no measurable evidence (with a depth resolution ∼1 nm) of beam-induced ion migration was observed, implying high radiation tolerance of PSCs. On the other hand, aged PSCs exhibited indications of the movement of diverse elemental species, such as Au, Pb, In, Sn, Br, and I, in the active area of the device, which was quantified with the help of RBS.

14 SOLAR ENERGY↗

NASA NTRS2003

Minimizing Segregation during the Controlled Directional Solidification of Dendric Alloys

Gravity-driven convection induced in the liquid by density gradients of temperature or composition disrupts uniform dendritic growth during controlled directional solidification and promotes severe macrosegregation. The solute-rich region about the dendrite tip appears to play a pivotal role in channel initiation. Allen and Hunt referred to this region as an "initial transient" or dynamic region constituting steep concentration gradients. Experimental investigation also point to the role the tip region plays in developing microstructure. Hellawell and co-workers showed that flow-through dendritic channels could be effectively disrupted, and segregation minimized, during the gradient freezing of bulk castings by rotating the melt through a slight angle with respect to Earth's gravity vector. Adapting this principle to controlled directional solidification, it has been shown" that segregation in dendritic alloys can be minimized, and properties improved, by processing the sample near horizontal in conjunction with a slow axial rotation of the crucible. It is postulated that the observed microstructural uniformity arises by maintaining the developing solute field about the dendrite tip. Solute rejected during vertical directional solidification will rise or sink parallel to the primary dendrite arms during axial rotation setting the stage for accumulation, instabilities, and segregation. In contrast, during horizontal growth, the rejected solute will sink or rise perpendicular to the primary dendrite. Now, in the presence of a slight axial rotation, solute that was initially sinking (or rising) will find itself above (or below) its parent dendrite, i.e., still about the tip region. The following is intended to experimentally demonstrate the viability of this concept in coordination with a model that gives predictive insight regarding solute distribution about growing dendrites. Alloys based on the lead-tin eutectic system were used in this study. The system is well characterized, the constituent metals are available in a very pure form, and the thermophysical properties are well known. During solidification of hypoeutectic alloys, e.g., 55 wt pct Pb, the primary dendrites reject the less dense tin, and for the hypereutectic alloys, e.g., 75 wt pct Sn, the primary dendrites reject denser lead. Alloys were prepared by melting appropriate amounts of lead and tin in a glass crucible after which the homogeneous liquid was sucked directly into 5-mm i.d. glass tubes. The sample tube, containing approximately 30 cm of alloy, was then mechanically driven into the directional solidification furnace assembly and positioned such that approx. 20 cm of the sample was remelted. Subsequently, directional solidification was initiated by withdrawing the sample through a water-cooled jacket at a constant growth velocity of 2 ,microns/s. After 5 to 6 cm of growth, the sample was quickly removed from the furnace and quenched in a water bath to preserve the solid-liquid interface. Samples were directionally solidified vertically upward, nearly horizontally, and some in conjunction with an applied axial rotation of the crucible. Temperature gradients at the solid-liquid interface were measured with an in-siru K-type thermocouple. Solidified samples were cut perpendicular and parallel to the growth direction and conventionally prepared for microscopic examination.

Grugel, Richard N.↗

NASA NTRS1990

Superconductivity in the Sn-Ba-Sr-Y-Cu-O system

Since Bednorz and Muller discovered high-T(sub c) superconductivity in the La-Ba-Cu-O compound, several families of superconducting oxides have been synthesized. Here, researchers report the results of search for superconductivity in the compounds based on tin, which has a lone electron pair like Bi, Tl, Pb. The following compounds were synthesized: Sn1Ba1Sr1Cu3Ox, Sn1Ba1Ca1Cu3Ox, Sn1Ba1Mg1Cu3Ox, Sn1Sr1Ca1Cu3Ox, Sn1Sr1Mg1Cu3Ox, Sn1Ca1Mg1Cu3Ox. The initial components were oxides and carbonates of the appropriate elements. Standard firing-grinding procedure was used. Final heating was carried out at 960 C during 12 hours. Then the samples were cooled inside the furnace. All the synthesis cycles were carried out in air atmosphere. Among the synthesized compounds only Sn1Ba1Sr1Cu3Ox showed remarkable conductivity. Other compounds were practically dielectrics. Presence of a possible superconductivity in Sn1Ba1Sr1Cu3Ox was defined by using the Meissner effect. At low temperature a deviation from paramagnetic behavior is observed. The hysteresis loops obtained at lower temperatures undoubtly testify to the presence of a superconductive phase in the sample. However, the part of the superconductive phase in the Sn1Ba1Sr1Cu3Ox ceramic turned out to be small, less than 2 percent, which agrees with the estimation from magnetic data. In order to increase the content of the superconductive phase two-valent cations Ba, Sr were partially substituted by univalent (K) and three-valent ones (Y).

Aleksandrov, K. S.↗