Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle mitigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Ripple-induced neoclassical toroidal viscous torque in Augmented-First Plasma operation phase in ITER

Abstract A systematic calculation is performed on the ripple-induced neoclassical toroidal viscous (NTV) torque for new ITER scenarios designed for the Augmented-First Plasma (A-FP) operation phase with the full tungsten wall, where the plasma-wall gap is varied in view of mitigating the impact of tungsten wall-plasma interactions. The torque calculation includes drift kinetic response of the plasma thermal and energetic particles to the n = 18 ( n is the toroidal harmonic number) ripple field. For the plasma scenario with ~45 cm plasma-wall gap at the outboard mid-plane and considering the corrected ripple level of 0.17% by the ferritic steel inserts, the computed net NTV torque acting on the plasma column is in the sub-Nm level. However, with decreasing the plasma-wall gap, the computed net NTV torque can reach a level comparable to that produced by the neutral-beam momentum injection in ITER. Ripple correction by ferritic inserts reduces the net torque by a factor of 3.3 for all the three A-FP scenarios considered. The n ω d = l ω b (with ω d and ω b being the toroidal precession and bounce frequencies of trapped particles, respectively, and l an integer number) type of resonance-enhancement of the NTV torque, due to thermal particles, is found to be weak in ITER despite high- n of 18. The same also holds for the ITER 10 MA steady state scenario from the D-T operation phase, where the aforementioned resonance associated with fusion-born alphas is also included. The ripple-induced NTV torque is well below that produced by the resonant magnetic perturbation applied for controlling the type-I edge-localized mode in ITER.

ITER↗
DOE OSTI2024

Characterization of pitch carbon coating properties affecting the electrochemical behavior of silicon nanoparticle lithium-ion battery anodes

Silicon is an exciting material for next-generation lithium-ion battery anodes, due to its high theoretical capacity and availability, but its widespread implementation has been limited by extensive volume changes during cycling that causes mechanical damage and limits cycle life. One approach to mitigating these deleterious effects while still maintaining silicon's benefits is the addition of a pitch carbon coating to nanometer-sized silicon particles. Here, in this study, we present characterization of pitch-coated silicon electrodes without annealing and annealed at 700 °C and 1000 °C to determine the optimum temperature treatment, as well as pitch-only and silicon-only electrodes with and without annealing to elucidate the impacts of each component on early electrochemical behavior. Using Fourier transform infrared and Raman spectroscopies, atomic force and scanning spreading resistance microscopy, and electrochemical analysis, we find 700 °C to be the optimal annealing temperature, as amorphous carbon is created, which improves conductivity prior to cycling and facilitates ion storage during cycling that increases capacity. We also present in situ Raman spectroscopy data demonstrating the heterogeneous aging that occurs across the electrode surface during cycling.

25 ENERGY STORAGE↗
DOE OSTI2026

Engineering Microstructure in Dry-Processed Cathodes Via Calendering

Calendering serves as a multifunctional step in dry electrode processing that not only densifies the electrode but also induces polytetrafluoroethylene (PTFE) fibrillation and reorganizes the microstructure. These coupled effects are essential for achieving electrical connectivity and sufficient cohesion, yet they also introduce trade-offs, such as active material particle fracture, pore collapse, and excessive porosity loss, that can hinder ionic transport. This research systematically maps the calendering parameter space for LiNi0.6Mn0.2Co0.2O2 (NMC622) dry cathodes with a target thickness of ∼100 µm and porosity of ∼30% by varying roll gaps, roll temperature, roll speed, and the number of passes. A practical processing window for this formulation and electrode architecture is identified that achieves sufficient PTFE fibrillation and strong interfacial contact while minimizing particle fracture and preserving the porosity required for efficient ionic transport. In particular, gradual-gap calendering with moderate per-pass compression mitigates fracture and pore collapse while still reaching the target thickness with reasonable throughput, and slower roll speeds with modest roll temperatures further reduce mechanical damage. These results provide actionable guidance for scaling NMC622-based thick dry-processed cathodes.

Park, Hyunji↗
DOE OSTI2024

Co-Benefits of Mitigating Aerosol Pollution to Future Solar and Wind Energy in China Toward Carbon Neutrality

The climate commitment to achieving carbon neutrality before 2060 in China has been announced recently. In the context of pursuing carbon neutrality, sharing similar sources as greenhouse gases, aerosol particle and precursor emissions are projected to substantially decrease in China, which can potentially have a great impact on climate. Here, we investigate the effects of future aerosol reductions, because of achieving carbon neutrality, on solar and wind energy in China by using an earth system model. We show that significant reductions in aerosol emissions, particularly in eastern China, lead to increases in the surface downwelling shortwave radiation, surface air temperature and wind speed, which can further enhance the potential of solar and wind energy production. The findings underline that the pursuit of carbon neutrality can yield co-benefits of not only mitigating climate change and air pollution but also fortifying the stability of renewable energy sources.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Axially symmetric e-lens based on McMillan map

In this work, we investigate the transverse dynamics of a single particle in a model integrable accelerator lattice, based on a McMillan axially symmetric electron lens. Although the McMillan e-lens has been considered as a device potentially capable of mitigating collective space charge forces, some of its fundamental properties have not been described yet. The main goal of our work is to close this gap and understand the limitations and potential of this device. We classify possible regimes with stable trajectories and provide set of canonical action-angle variables, along with an evaluation of the dynamical aperture, Poincar\'e rotation numbers as functions of amplitudes, and spread in nonlinear tunes.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Strong-field QED limitations on TeV-class plasma wakefield accelerators

We demonstrate that quantum and classical radiation effects can become non-negligible for TeV-class beams propagating through plasma channels typical of staged plasma accelerators. Although the quantum nonlinearity parameter χ e remains small under currently envisioned experimental conditions, the cumulative influence of radiation over long acceleration distances can lead to significant modifications to the beam’s energy spread, emittance, and polarization. Our analytic models, validated by particle-in-cell simulations, highlight that for standard Gaussian beams, the orbit-induced energy spread dominates over quantum stochastic effects but can be mitigated by tailoring the beam profile, for example, through ring-shaped transverse distributions. In regimes where the radiation reaction approaches the accelerating force, the emittance may be cooled, forming distinctive ring-shaped phase-space structures. Finally, we analyze the influence of the radiation effect on spin transport inside the wakefield. These findings underscore the importance of considering both classical and quantum radiation dynamics in the design and optimization of future high-intensity plasma accelerators.

accelerator↗
DOE OSTI2026

Search for the chiral magnetic effect through beam energy dependence of charge separation using event shape selection

High-energy, heavy-ion collisions can create local domains of chirality-imbalanced quarks, reflecting the topological features of quantum chromodynamics. The chiral magnetic effect (CME) predicts an electric charge separation of quarks in such topological domains along the magnetic field ($\vec{B}$) generated by the passing of two high-Z nuclei. Here, we use a correlation observable Δ⁢𝛾$^{112}$ between charged meson pairs to detect the CME-induced charge separation and a novel event shape selection (ESS) method to mitigate the background effects related to elliptic flow (𝑣 2 ). The ESS method classifies events based on the emission pattern of final-state particles and determines Δ⁢𝛾$^{112}_{ESS}$ from the zero-flow limit. We reconstruct the $\vec{B}$ field direction from the spectator nucleons, which minimizes backgrounds unrelated to the collective motion of the system. In this work, we report the measurements of Δ⁢𝛾$^{112}$ and a background indicator Δ⁢𝛾$^{132}$ in Au+Au collisions from the Brookhaven National Laboratory Relativistic Heavy Ion Collider (RHIC) Beam Energy Scan phase II and at the top RHIC energy. After background suppression, Δ⁢𝛾$^{132}_{ESS}$ aligns with zero, and Δ⁢𝛾$^{112}_{ESS}$ is reduced to no more than 20% of Δ⁢𝛾$^{112}$. We observe a finite residual charge separation with 2.5⁢𝜎, 3⁢𝜎, and 3.2⁢𝜎 significance in the 20–50% centrality range of Au + Au collisions at 11.5, 14.6, and 19.6 GeV. The results at 17.3 and 27 GeV also show positive values but with a lower significance of 1.3⁢𝜎 and 1.1⁢𝜎, respectively. The corresponding Δ⁢𝛾$^{112}_{ESS}$ values at 7.7, 9.2, and 200 GeV are consistent with zero within uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Group-theoretic error mitigation enabled by classical shadows and symmetries

Abstract Estimating expectation values is a key subroutine in quantum algorithms. Near-term implementations face two major challenges: a limited number of samples required to learn a large collection of observables, and the accumulation of errors in devices without quantum error correction. To address these challenges simultaneously, we develop a quantum error-mitigation strategy called symmetry-adjusted classical shadows , by adjusting classical-shadow tomography according to how symmetries are corrupted by device errors. As a concrete example, we highlight global U(1) symmetry, which manifests in fermions as particle number and in spins as total magnetization, and illustrate their group-theoretic unification with respective classical-shadow protocols. We establish rigorous sampling bounds under readout errors obeying minimal assumptions, and perform numerical experiments with a more comprehensive model of gate-level errors derived from existing quantum processors. Our results reveal symmetry-adjusted classical shadows as a low-cost strategy to mitigate errors from noisy quantum experiments in the ubiquitous presence of symmetry.

Zhao, Andrew (ORCID:0000000202990277)↗
DOE OSTI2024

Axially Symmetric E-Lens Based on McMillan Map

In this work, we investigate the transverse dynamics of a single particle in a model integrable accelerator lattice, based on a McMillan axially symmetric electron lens. Although the McMillan e-lens has been considered as a device potentially capable of mitigating collective space charge forces, some of its fundamental properties have not been described yet. The main goal of our work is to close this gap and understand the limitations and potential of this device. We classify possible regimes with stable trajectories and provide set of canonical action-angle variables, along with an evaluation of the dynamical aperture, Poincar\'e rotation numbers as functions of amplitudes, and spread in nonlinear tunes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Neutrino beam bunch structure reconstruction with precision timing in the ICARUS liquid argon time projection chamber

The ICARUS detector has been operating smoothly since 2021 as the far detector in the Short Baseline Neutrino (SBN) program at Fermilab, collecting neutrino interactions from both the Booster Neutrino Beam (BNB) and off-axis from the Neutrinos at the Main Injector (NuMI) beam. Analysis of neutrino interactions in ICARUS requires mitigation of substantial cosmogenic backgrounds. This is achieved by using an external Cosmic Ray Tagger (CRT) and a Photomultiplier Tube (PMT) system embedded in the liquid argon. The intrinsic neutrino beam bunch structure, inherited time structure from the Radio Frequency (RF) system used to accelerate the protons, can be resolved at the ICARUS detector using precise timing information. Located at shallow depth, ICARUS is exposed to a high flux of cosmic rays that can be mistaken for neutrino interactions. To mitigate this background, the CRT and a 3-meter-thick concrete overburden were installed. To better model backgrounds, ICARUS makes use of an overlay technique where simulated neutrino events are superimposed on detector beam-off data. PMTs installed within a Time Projection Chamber detect argon scintillation light emitted by high energy charged particles passing through the chamber and provide the event timing of neutrino interactions. The nanosecond-level beam bunch structure is reconstructed with the PMT system and can be used to further understand backgrounds and enhance neutrino physics capabilities. In this thesis, I will discuss background mitigation techniques using precision timing and present a novel technique to select neutrino events from our unbiased data stream using the beam bunch structure.

Heggestuen, Anna [Colorado State U.] (ORCID:000000↗
DOE OSTI2026

A cryogenic muon tagging system based on kinetic inductance detectors for superconducting quantum processors

Ionizing radiation has emerged as a potential limiting factor for superconducting quantum processors, inducing quasiparticle bursts and correlated errors that challenge fault-tolerant operation. Atmospheric muons are particularly problematic due to their high energy and penetration power, making passive shielding ineffective. Therefore, monitoring the real-time muon flux is crucial to guide the development of alternative error-correction or mitigation strategies. We present the design, simulation, and first operation of a cryogenic muon-tagging system based on kinetic inductance detectors (KIDs), developed as a stand-alone cryogenic particle-tagging module for superconducting quantum processors. The system consists of two KIDs arranged in a vertical stack and operated at ∼20 mK. Monte Carlo simulations based on Geant4 guided the prototype design and provided reference expectations for muon-tagging efficiency and accidental coincidences due to ambient γ-rays. We observed a muon-induced coincidence rate among the top and bottom detectors of (192 ± 9) $\times\,10^{-3}$ events s$^{−1}$, in excellent agreement with the Monte Carlo prediction. The prototype achieves a muon-tagging efficiency of about 90% with negligible dead time. These results demonstrate the feasibility of operating a muon-tagging system at millikelvin temperatures and represent a key step toward the integration of cryogenic veto systems with multi-qubit chips to mitigate muon-induced errors.

Mariani, Ambra [INFN, Rome] (ORCID:000000028184857↗
DOE OSTI2024

Quantifying the Influence of Size, Shape, and Density of Microplastics on Their Transport Modes: A Modeling Approach

Microplastics (MPs) pose significant risks to marine ecosystems and human health, necessitating accurate predictions of their distributions in aquatic environments for effective risk mitigation. However, understanding MP transport dynamics is challenging because of the inadequate representation of MP characteristics such as size, shape, and density in numerical models. Further, the accuracy of the MP vertical profiles in existing models has not been thoroughly validated. Thus, we developed an MP transport model within the Finite Volume Community Ocean Model framework (FVCOM-MP) by integrating MP characteristics. We validated FVCOM-MP against experimental and analytical data, focusing on various MP transport modes and transitions. FVCOM-MP successfully replicates MP profiles in different transport modes, including the bedload, surface-load, suspended-load, and mixed-load modes. Additionally, we introduce phase diagrams for classifying MP transport modes based on particle characteristics, enhancing our understanding of MP dynamics in aquatic systems. The transport modes for a number of real-world MP particles, including fishing line, plastic bag/bottle fragments, synthetic fibers, tire wear particles, polyvinyl chloride and expanded polystyrene pellets, were analyzed with these phase diagrams.

Microplastic transport, Settling velocity, Rising ↗
DOE OSTI2025

Dynamics of McMillan mappings II. axially symmetric map

Here, in this article, we investigate the transverse dynamics of a single particle in a model integrable accelerator lattice, based on a McMillan axially-symmetric electron lens. Although the McMillan e-lens has been considered as a device potentially capable of mitigating collective space charge forces, some of its fundamental properties have not been described yet. The main goal of our work is to close this gap and understand the limitations and potentials of this device. It is worth mentioning that the McMillan axially symmetric map provides the first-order approximations of dynamics for a general linear lattice plus an arbitrary thin lens with motion separable in polar coordinates. Therefore, advancements in its understanding should give us a better picture of more generic and not necessarily integrable round beams. In the first part of the article, we classify all possible regimes with stable trajectories and find the canonical action-angle variables. This provides an evaluation of the dynamical aperture, Poincaré rotation numbers as functions of amplitudes, and thus determines the spread in nonlinear tunes. Also, we provide a parameterization of invariant curves, allowing for the immediate determination of the map image forward and backward in time. The second part investigates the particle dynamics as a function of system parameters. We show that there are three fundamentally different configurations of the accelerator optics causing different regimes of nonlinear oscillations. Each regime is considered in great detail, including the limiting cases of large and small amplitudes. In addition, we analyze the dynamics in Cartesian coordinates and provide a description of observable variables and corresponding spectra.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Simulation Center for Runaway Electron Avoidance and Mitigation (SCREAM SciDAC) (Technical Final Report)

Runaway electrons can severely damage the plasma facing components on ITER during a major disruption and pose a major risk for tokamak fusion. It has been recognized that an adequate disruption mitigation system (DMS) is essential for the safe operation of ITER. The United States is responsible for the design and implementation of the disruption mitigation system on ITER, and in July 2016 the Simulation Center for Runaway Electron Avoidance and Mitigation (SCREAM) was launched by DOE, in a joint Fusion Energy Sciences (FES) and Advanced Scientific Computing Research (ASCR) collaboration. SCREAM was a comprehensive theory and simulation SciDAC center that provided physics guidance in the avoidance and mitigation of runaway electrons, and in tandem with domestic and international experiments, helped establish the qualitative and quantitative bases for safe operational scenarios and viable mitigation techniques. The SCREAM center assembled a national team of experts in runaway electron physics, tokamak disruptions, magnetohydrodynamic (MHD) simulation, and advanced algorithms and computing. The team combined advanced simulation and analysis capability facilitated by direct participation of ASCR SciDAC institutes with theoretical models and code development by FES scientists to focus on the runaway risk for ITER and tokamaks in general. The research scope was focussed on integrated simulations of kinetic runaway electrons, including MHD and fluid models of impurity transport, within a research plan guided by theory. The specific research tasks were (1) establish the fundamental physics of runaway generation, saturation, and dynamical evolution in a tokamak; (2) examine the critical path toward runaway avoidance; and (3) investigate the viability and effectiveness of the leading candidate schemes for runaway mitigation. In all three areas, members of the team carried out scoping studies that established the readiness for rapid and critical advances, especially in the deployment and further development of large-to extreme-scale simulation tools. Our multi-pronged computational approach included (1) relativistic Fokker-Planck solvers with discretization in phase space, (2) self-consistent particle-in-cell techniques, (3) particle-based Monte-Carlo, and (4) MHD-particle hybrid simulations. Cross-check between these different methods provided an additional means for verification and further bolstered the fidelity of our physics prediction. Validation against experimental results brings confidence to the predictive capability for ITER and frequently leads to new ideas for understanding and mitigating the thermal quench driven runaway electron phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Solvent-Free Melt-Processed Cathode Mitigates Li Anode Instability in Polymer-Based Solid-State Batteries

Solvent-free manufacturing of battery components is a promising alternative to traditional slurry processing for reducing the cost and environmental impact. In this work, we used twin-screw melt extrusion to fabricate a polymer-based high voltage composite cathode. The melt-processed cathode is dense (near zero porosity) and thick (65 μm) and has high active material loading (80 wt %). The active particles are distributed uniformly throughout the melt-processed cathode, unlike the traditional slurry-cast cathode, which exhibits inhomogeneous particle distribution. In the melt-processed cathode, polymer and carbon form separate phases, whereas in the slurry-cast cathode they blend into a single phase. Due to these structural differences, the melt-processed cathode shows smooth charge–discharge profiles, while the slurry-cast cathode shows noisy charging and soft-shorting behavior. In conclusion, this work highlights that twin-screw extrusion as a scalable, solvent-free manufacturing method is advantageous in producing uniform cathodes, which mitigates anode instability.

25 ENERGY STORAGE↗
DOE OSTI2025

An upper pressure limit for low- Z benign termination of runaway electron beams in TCV

Abstract We present a model for the particle balance in the post-disruption runaway electron plateau phase of a tokamak discharge. The model is constructed with the help of, and applied to, experimental data from TCV discharges investigating the so-called ‘low- Z benign termination’ runaway electron mitigation scheme. In the benign termination scheme, the free electron density is first reduced in order for a subsequently induced MHD instability to grow rapidly and spread the runaway electrons widely across the wall. We show that the observed non-monotonic dependence of the free electron density with the measured neutral pressure is due to plasma re-ionization induced by runaway electron impact ionization. At higher neutral pressures, more target particles are present in the plasma for runaway electrons to collide with and ionize. Parameter scans are conducted to clarify the role of the runaway electron density and energy on the free electron density, and it is found that only the runaway electron density has a noticeable impact. While the free electron density is shown to be related to the spread of heat fluxes at termination, the exact cause for the upper neutral pressure limit remains undetermined and an object for further study.

Hoppe, M. (ORCID:0000000339948977)↗
DOE OSTI2024

Techno-economic and life-cycle analysis of strategies for improving operability and biomass quality in catalytic fast pyrolysis of forest residues

Many of the challenges faced by the first commercial biorefineries were associated with feedstock handling, quality, and cost. Strategies are needed to enable further expansion of biorefineries and meet the growing demand for bio-based fuels and products. Here, we examine 2 key feedstock challenges and mitigation strategies in the context of a catalytic fast pyrolysis (CFP) biorefinery: (1) the operability of the feed system, which may be improved by modifying the minimum particle size fed to the reactor, and (2) the quality of the biomass, which may be improved by employing air classification to remove undesirable material and increase fuel yields. We conduct techno-economic analysis (TEA) and life-cycle analysis for these strategies, employing a discrete event simulation model for biomass preprocessing combined with a series of correlations developed from literature data and a rigorous CFP conversion model. Our results highlight the importance of balancing increased cost and material losses from preprocessing against improved operability and fuel yields. Economics and sustainability were optimized when operating at the lowest minimum particle size, emphasizing the importance of minimizing material losses while maintaining the operability of the process. Economically, additional costs and material losses from air classification could be acceptable due to improved biomass conversion, and an optimum air classification speed was identified; however, the fuel GHG emissions were minimized when air classification was not used. Valorizing material removed during preprocessing as a coproduct could improve economics and sustainability, decreasing the burden of material losses.

09 - BIOMASS FUELS↗
DOE OSTI2026

Results from the last DD and DT JET campaigns in the framework of the EUROfusion Tokamak Exploitation Work Package activity

JET, the only tokamak capable of operating with deuterium–tritium (D–T) fuel (since TFTR was shutdown in 1999), has provided essential experimental data to support ITER and DEMO design and operation. Within the EUROfusion Tokamak Exploitation Work Package, JET completed its final campaigns (2022–2023), culminating in the third D–T campaign (DTE3). These experiments addressed key challenges in plasma scenarios, exhaust control, and tritium management under reactor-relevant conditions. Significant progress was achieved in demonstrating ITER-like integrated scenarios with impurity seeding, achieving partial divertor detachment and high confinement ($H_{98}(y,2)$ ≈ 0.85) at 3 MA in D–T plasmas. Advanced exhaust regimes such as quasi-continuous exhaust (QCE) and X-point radiator (XPR) were successfully achieved first in D–D and then extended to D–T operation, confirming their relevance for mixed isotope operation. Operational milestones included a new world record of 69 MJ fusion energy in tritium-rich hybrid plasmas and long-pulse H-mode operation up to 60 s, contributing with unique data to the CICLOP database. Physics studies focused on peeling-limited pedestals in support of ITER and improved understanding of edge stability and impurity screening in metallic environments. Extensive usage of the shattered pellet injector (SPI) on JET provided critical information for the design of the ITER disruption mitigation system (DMS). Real-time control systems for D/T ratio control and plasma exhaust were deployed and demonstrated in D–D and D–T, while energetic particle physics investigations unfolded the role of fast ions in turbulence suppression mechanisms. Comprehensive tritium retention studies using gas balance method, post-mortem analysis, and ITER-relevant laser induced desorption spectroscopy (LIDS) diagnostics provided essential input for tritium accountancy strategies. These results are validating the ITER operational concepts, inform DEMO design, and deliver critical experience in nuclear operation and scenario integration.

disruptions↗