Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROJECTILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

CFD Prediction for Spin Rate of Fixed Canards on a Spinning Projectile

A computational study performed for spin rate of fixed cancards on a spinning projectile is presented in this paper. The cancards configurations provide challenges in terms of the determination of the aerodynamic forces and moments and the flow field changes which could have significant effect on the stability, performance, and corrected round accuracy. Advanced time accurate Navier-Stokes computations have been performed to compute the spin rate associated with the spinning motion of the cancards configurations at supersonic speed. The results show that roll-damping moment of cancards varies linearly with the spin rate at supersonic velocity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of dust projectiles passing over an obstacle in the plasma sheath

Dust projectiles were produced in a radio-frequency plasma by increasing 6-fold the radio-frequency power put into the discharge. The initial static dust particles were observed to gain speed while moving away from the confining region and escaped from the inter-electrode space on a ballistic-like trajectory. Single-grain dynamics simulations indicated that the dust particles were accelerated by changes induced in the sheath electric field profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic diagnostic techniques for hypervelocity projectile detection, velocity measurement, and size characterization: Theoretical concept and first experimental test

A new measurement technique is suggested to augment the characterization and understanding of hypervelocity projectiles before impact. The electromagnetic technique utilizes magnetic diffusion principles to detect particles, measure velocity, and indicate relative particle dimensions. It is particularly suited for detection of small particles that may be difficult to track utilizing current characterization methods, such as high-speed video or flash radiography but can be readily used for large particle detection, where particle spacing or location is not practical for other measurement systems. In this work, particles down to 2 mm in diameter have been characterized while focusing on confining the detection signal to enable multi-particle characterization with limited particle-to-particle spacing. The focus of the paper is on the theoretical concept and the analysis of its applicability based on analytical and numerical calculation. First proof-of-principle experimental tests serve to further validate the method. Some potential applications are the characterization of particles from a shaped-charge jet after its break-up and investigating debris in impact experiments to test theoretical models for the distribution of particles size, number, and velocity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Isospin-dependent multifragmentation of relativistic projectiles

The N/Z dependence of projectile fragmentation at relativistic energies has been studied with the ALADIN forward spectrometer at the GSI Schwerionen Synchrotron (SIS). Stable and radioactive Sn and La beams with an incident energy of 600 MeV per nucleon have been used in order to explore a wide range of isotopic compositions. For the interpretation of the data, calculations with the statistical multifragmentation model for a properly chosen ensemble of excited sources were performed. The parameters of the ensemble, representing the variety of excited spectator nuclei expected in a participant-spectator scenario, are determined empirically by searching for an optimum reproduction of the measured fragment-charge distributions and correlations. An overall very good agreement is obtained. The possible modification of the liquid-drop parameters of the fragment description in the hot freeze-out environment is studied, and a significant reduction of the symmetry-term coefficient is found necessary to reproduce the mean neutron-to-proton ratios <N>/Z and the isoscaling parameters of Z{<=}10 fragments. The calculations are, furthermore, used to address open questions regarding the modification of the surface-term coefficient at freeze-out, the N/Z dependence of the nuclear caloric curve, and the isotopic evolution of the spectator system between its formation during the initial cascade stage of the reaction and its subsequent breakup.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Intra- and intergroup azimuthal correlations of particles in the interaction of gold nuclei with silver and bromine nuclei of track emulsions at the projectile energy of 10.6 GeV per nucleon

Inter- and intragroup azimuthal correlations of target and projectile fragments and of shower particles in the interactions between gold nuclei of energy 10.6 GeV per nucleon and silver and bromine nuclei of a track emulsion are studied at intermediate values of the impact parameter. The asymmetry index {beta}'{sub 1} and the collinearity index {beta}'{sub 2} of groups' asymmetry vectors are used to study azimuthal correlations between two and three groups of particles. The interplay of effects of intra- and intergroup azimuthal particle correlations is investigated.

74 ATOMIC AND MOLECULAR PHYSICS↗

The influence of projectile neutron number in the 208Pb(48Ti, n)255Rf and 208Pb(50Ti, n)257Rf reactions

Four isotopes of rutherfordium,254-257Rf, were produced by the 208Pb(48Ti, xn)256-xRf and 208Pb(50Ti, xn)258-xRf reactions (x = 1, 2) at the Lawrence Berkeley National Laboratory 88-Inch Cyclotron. Excitation functions were measured for the 1n and 2n exit channels. A maximum likelihood technique, which correctly accounts for the changing cross section at all energies subtended by the targets, was used to fit the 1n data to allow a more direct comparison between excitation functions obtained under different experimental conditions. The maximum 1n crosssections of the 208Pb(48Ti, n)255Rf and 208Pb(50Ti, n)257Rf reactions obtained from fits to the experimental data are 0.38 +/- 0.07 nb and 40 +/-5 nb, respectively. Excitation functions for the 2n exit channel were also measured, with maximum cross sections of nb for the 48Ti induced reaction, and 15.7 +/- 0.2 nb for the 50Ti induced reaction. The impact of the two neutron difference in the projectile on the 1n cross section is discussed. The results are compared to the Fusion by Diffusion model developed by Swiatecki, Wilczynska, and Wilczynski.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Steady-State and Transient Hydrocarbon Production in Graphite by Low Energy Impact of Atomic and Molecular Deuterium Projectiles

We report measurements of steady-state yields of methyl, methane and heavier hydrocarbons for deuterium atomic and molecular ions incident on ATJ graphite, HOPG, and a-C:D thin films in the energy range 10-200 eV/D. The yields were determined using a QMS technique in conjunction with calibrated hydrocarbon leaks. We have also studied transient hydrocarbon production and hydrogen (deuterium) re-emission for 80 and 150 eV/D D+, D{sub 2}{sup +}, and D{sub 3}{sup +} projectiles incident on ATJ graphite surfaces pre-loaded to steady state by 20 eV/D beams of the corresponding species. Immediately after starting the higher-energy beams, transient hydrocarbon and D2 re-emission yields significantly larger than steady-state values were observed, which exponentially decayed as a function of beam fluence. The initial yield values were related to the starting hydrocarbon and deuterium densities in the prepared sample, while the exponential decay constants provided information on the hydrocarbon kinetic release and hydrogen (deuterium) detrapping cross-sections.

03 NATURAL GAS↗

ANALYSES OF VARIOUS DAMAGE MECHANISMS IN TRANSPARENT ARMOR SUBJECT TO PROJECTILE IMPACT

Design and manufacturing of transparent armor have been historically carried out using experimental approaches. In this study, we use advanced computational modeling tools to study the various stress components during the impact event and to identify the different crack/damage driving mechanisms for the different cracking patterns. Experimentally observed damage patterns for a thick glass laminate under fragmentation simulation projectile (FSP) impact are used to compare with the modeling results. AHPCRC developed modeling software EPIC’06 [1] is used in predicting the penetration resistance of transparent armor systems. It is found that a 1-parameter single state model can be used to predict the impact penetration depth with relatively good accuracy. In addition, hoop stress and circumferential stresses are found to produce ripple cracks, needle cracks and radial cracks. It is also found that a region of high hoop stress and circumferential stress is produced by the impact at the back side of the target plate, causing the floret damage region possibly leading to higher penetration depth for thinner laminates or higher velocity impact.

36 MATERIALS SCIENCE↗

OPTIMIZING TRANSPARENT ARMOR DESIGN SUBJECT TO PROJECTILE IMPACT CONDITIONS

Design and manufacturing of transparent armor have been historically carried out using experimental approaches. In this study, we use advanced computational modeling tools to perform virtual design evaluations of transparent armor systems under different projectile impact conditions. AHPCRC developed modeling software EPIC’06 [1] is used in predicting the penetration resistance of transparent armor systems. LaGrangian-based finite element analyses combined with particle dynamics are used to simulate the damage initiation and propagation process for the armor system under impact conditions. It is found that a 1-parameter single state model can be used to predict the impact penetration depth with relatively good accuracy, suggesting that the finely comminuted glass particles follow the behavior similar to a viscous fluid. Even though the intact strength of borosilicate and soda lime glass are different, the same fractured strength can be used for both glasses to capture the penetration depth.

36 MATERIALS SCIENCE↗

Rate-Dependent Dynamic Cylindrical Cavity Expansion Equations for Conical- and Ogival-Nosed Projectiles

The dynamic cylindrical cavity expansion of rate-dependent materials was previously derived by Warren to examine the effects of strain-rate sensitivity on the radial stress acting on a perforating projectile. However, the equations presented were largely analytical and were not further applied to predict the ballistic performance of ductile target plates. The current work expands on Warren’s derivation to model the dynamics of conical and ogival geometries, and the rate-dependent model is compared to prior experimental results of 7.62-mm APM2 rounds impacting 6061-T6511 aluminum alloy plates. The results show that including rate effects improves the ballistic performance prediction, even for a marginally strain-rate sensitive material such as Al6061-T651. However, existing semi-empirical variations of the cavity expansion model can provide the same degree of accuracy if target material rate-sensitivity parameters are not readily available.

36 MATERIALS SCIENCE↗

State-selective and total cross sections for electron capture from the K-shell of multi-electron atoms by fully stripped projectiles

Capture of a K-shell electron by bare fast ions H{sup +}, He{sup 2+} and Li{sup 3+} from multi-electron atomic targets (carbon, nitrogen, oxygen, neon and argon) is theoretically studied by means of the four-body boundary-corrected first Born approximation. In a wide impact energy interval ranging from 100 to 40 000 keV/amu, extensive tables of the obtained state-selective cross sections Q{sub nlm} are presented for each individual final hydrogen-like state described by the usual quantum numbers {n,l,m}. The total cross sections Q{sub nl}, Q{sub n} and Q{sub tot} for capture summed over the quantum numbers m, {l,m} and {n,l,m}, respectively, are also reported. Theoretical cross sections Q{sub tot} are found to compare favorably with the corresponding experimental data. The maximal value of the principal quantum number n has been taken to be n=4, which satisfies the relationship n≥Z{sub P}, where Z{sub P} is the nuclear charge of the projectile. The tabulated state-selective cross sections Q{sub nlm} for single-electron capture by swift nuclei from multi-electron atoms are the first results in the literature on the theory of four-body collisions. The present data for the examined capture processes are of notable interest for many fundamental and applied problems in various interdisciplinary fields ranging from fusion research, plasma physics, astrophysics to radiotherapy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigating the relationship between radial pre-stress magnitude and ballistic projectile dwell in heavy confined ceramic targets

A series of bare silicon carbide ceramic armour disks were manufactured with high-strength steel containment to induce varying magnitudes of radial pre-stress. The induced radial stresses, ranging from 0 to 900 MPa, were measured via neutron diffraction and verified by comparison with numerical calculations. Four targets of each configuration, referred to as slip-fit, moderate pre-stress, and high pre-stress, were subject to ballistic testing with hemispherical-nose, tungsten heavy alloy long rod projectiles to determine the interface defeat transition velocity. In-situ diagnostics were unsuccessful in aiding the identification of interface defeat, necessitating a reliance on post-mortem assessment. A transition velocity of approx. 1000 m/s was identified for the unstressed target, increasing to approx. 1200 m/s for the pre-stressed configurations. No performance effect was discernible between the moderate (372 MPa) and high (899 MPa) pre-stress configurations, suggesting that an optimal performance may be achieved for lower pre-stress levels (i.e., <372 MPa). Additionally, the test results were compared with four semi-analytical predictions of interface defeat performance and good agreement was found, albeit with significant range in the model predictions.

42 ENGINEERING↗

High-velocity projectile impact induced 9R phase in ultrafine-grained aluminium

Aluminium typically deforms via full dislocations due to its high stacking fault energy. Twinning in aluminium, although difficult, may occur at low temperature and high strain rate. However, the 9R phase rarely occurs in aluminium simply because of its giant stacking fault energy. Here, by using a laser-induced projectile impact testing technique, we discover a deformation-induced 9R phase with tens of nm in width in ultrafine-grained aluminium with an average grain size of 140 nm, as confirmed by extensive post-impact microscopy analyses. The stability of the 9R phase is related to the existence of sessile Frank loops. Molecular dynamics simulations reveal the formation mechanisms of the 9R phase in aluminium. This study sheds lights on a deformation mechanism in metals with high stacking fault energies.

42 ENGINEERING↗

Feasibility of Isotope Harvesting at a Projectile Fragmentation Facility: 67Cu

The work presented here describes a proof-of-principle experiment for the chemical extraction of 67Cu from an aqueous beam stop at the National Superconducting Cyclotron Laboratory (NSCL). A 76 MeV/A 67Cu beam was stopped in water, successfully isolated from the aqueous solution through a series of chemical separations involving a chelating disk and anion exchange chromatography, then bound to NOTA-conjugated Herceptin antibodies, and the bound activity was validated using instant thin-layer chromatography (ITLC). The chemical extraction efficiency was found to be 88 ± 3% and the radiochemical yield was ≥95%. These results show that extraction of radioisotopes from an aqueous projectile-fragment beam dump is a feasible method for obtaining radiochemically pure isotopes.

07 ISOTOPE AND RADIATION SOURCES↗

{sup 10-11}Li and {sup 13-14}Be Studied by Projectile Fragmentation and pp-RPA

The level ordering in the unbound nuclei {sup 10}Li and {sup 13}Be is established on firm basis using a time dependent projectile fragmentation model, comparing to experimental data and using structure inputs obtained from a semi-phenomenological core-vibration coupling model of two-neutron halo nuclei. As a consistency test we show that the energy spectra of some Beryllium isotopes obtained by using pp-RPA predict the same shell ordering as extracted from the reaction model vs. data analysis and that the well known structure of {sup 11}Li is reproduced.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Detection of atomic and molecular mega-electron-volt projectiles using an x-ray charged coupled device camera

We show that an x-ray charge coupled device (CCD) may be used as a particle detector for atomic and molecular mega-electron-volt (MeV) projectiles of around a few hundred keV per atomic mass unit. For atomic species, spectroscopic properties in kinetic energy measurements (i.e., linearity and energy resolution) are found to be close to those currently obtained with implanted or surface barrier silicon particle detectors. For molecular species, in order to increase the maximum kinetic energy detection limit, we propose to put a thin foil in front of the CCD. This foil breaks up the molecules into atoms and spreads the charges over many CCD pixels and therefore avoiding saturation effects. This opens new perspectives in high velocity molecular dissociation studies with accelerator facilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Half-life measurements of isomeric states populated in projectile fragmentation

The half-lives of excited isomeric states observed in {sup 195}Au, {sup 201}Tl and {sup 215}Rn are reported for the first time. Delayed {gamma}-rays were correlated with nuclei produced in the projectile fragmentation of relativistic {sup 238}U ions, unambiguously identified in terms of their atomic number (Z) and mass-to-charge ratio (A/Q) after traversing an in-flight separator. The observation of a long-lived isomeric state in {sup 195}Au with t{sub 1/2} = 16{sub -4}{sup +8}{mu}s is presented. Two shorter-lived isomeric states were detected in {sup 201}Tl and {sup 215}Rn with t{sub 1/2} = 95{sub -21}{sup +39} and 57{sub -12}{sup +21} ns respectively. In total 24 isomeric states were identified in different nuclei from Pt to Rn (A {approx} 200) during the current study, the majority of which were previously reported. The wealth of spectroscopic data provides the opportunity to determine the isomeric ratios over a wide range of Z, A and angular momentum (I h) of the reaction products. In particular, high-spin states with I Greater-Than-Or-Equivalent-To 18 h provide a robust test of theoretical models of fragmentation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗