Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POSITRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Scattering of positrons and electrons by alkali atoms

Absolute total scattering cross sections (Q sub T's) were measured for positrons and electrons colliding with sodium, potassium, and rubidium in the 1 to 102 eV range, using the same apparatus and experimental approach (a beam transmission technique) for both projectiles. The present results for positron-sodium and -rubidium collisions represent the first Q sub T measurements reported for these collision systems. Features which distinguish the present comparisons between positron- and electron-alkali atom Q sub T's from those for other atoms and molecules (room-temperature gases) which have been used as targets for positrons and electrons are the proximity of the corresponding positron- and electron-alkali atom Q sub T's over the entire energy range of overlap, with an indication of a merging or near-merging of the corresponding positron and electron Q sub T's near (and above) the relatively low energy of about 40 eV, and a general tendency for the positron-alkali atom Q sub T's to be higher than the corresponding electron values as the projectile energy is decreased below about 40 eV.

Stein, T. S.↗
NASA NTRS1991

Slow positron beam generator for lifetime studies

A slow positron beam generator uses a conductive source residing between two test films. Moderator pieces are placed next to the test film on the opposite side of the conductive source. A voltage potential is applied between the moderator pieces and the conductive source. Incident energetic positrons: (1) are emitted from the conductive source; (2) are passed through test film; and (3) isotropically strike moderator pieces before diffusing out of the moderator pieces as slow positrons, respectively. The slow positrons diffusing out of moderator pieces are attracted to the conductive source which is held at an appropriate potential below the moderator pieces. The slow positrons have to pass through the test films before reaching the conductive source. A voltage is adjusted so that the potential difference between the moderator pieces and the conductive source forces the positrons to stop in the test films. Measurable annihilation radiation is emitted from the test film when positrons annihilate (combine) with electrons in the test film.

Singh, Jag J.↗
DOE OSTI2013

The Calibration of the PEPPo Polarimeter for Electrons and Positrons

The PEPPo (Polarized Electrons for Polarized Positrons) experiment at Jefferson Laboratory investigated the polarization transfer from longitudinally polarized electrons to longitudinally polarized positrons, with the aim of developing this technology for a low energy (~MeV) polarized positron source. Polarization of the positrons was measured by means of a Compton transmission polarimeter where incoming positrons transfer their polarization into circularly polarized photons that were subsequently analyzed by a thick polarized iron target. The measurement of the transmitted photon flux with respect to the orientation of the target polarization (+-) or the helicity (+-) of the incoming leptons provided the measurement of their polarization. Similar measurements with a known electron beam were also performed for calibration purposes. This presentation will describe the apparatus and calibrations performed at the injector at the Jefferson Laboratory to measure positron polarization in the momentum range 3.2-6.2 MeV/c, specifically to quantify the positron analyzing power from electron experimental data measured over a comparable momentum range.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Positron Sources for Future High Energy Physics Colliders

An unprecedented positron average current is required to fit the luminosity demands of future $e^+e^-$ high energy physics colliders. In addition, in order to access precision-frontier physics, these machines require positron polarization to enable exploring the polarization dependence in many HEP processes cross sections, reducing backgrounds and extending the reach of chiral physics studies beyond the standard model. The ILC has a mature plan for the polarized positron source based on conversion in a thin target of circularly polarized gammas generated by passing the main high energy e-beam in a long superconducting helical undulator. Compact colliders (CLIC, C3 and advanced accelerator-based concepts) adopt a simplified approach and currently do not plan to use polarized positrons in their baseline design, but could greatly benefit from the development of compact alternative solutions to polarized positron production. Increasing the positron current, the polarization purity and simplifying the engineering design are all opportunities where advances in accelerator technology have the potential to make a significant impact. This white-paper describes the current status of the field and provides R&D short-term and long-term pathways for polarized positron sources.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Hydrated doped-BaZrO 3 proton conductors studied by positron annihilation lifetime spectroscopy

The study of defect chemistry for doped BaZrO 3 proton conductors is of particular interest because of defect interactions that can affect the proton conductivity of the material. Protons incorporated due to the material's hydration can be trapped by negatively charged immobile dopants, reducing proton mobility. The reduction of the proton conduction impedes using BaZrO 3 materials in energy conversion applications at intermediate temperatures (300°C – 600°C). The probing of proton trapping in doped BaZrO 3 is hindered by the limited availability of techniques sensitive to defect chemistries. In this work, we used positron annihilation lifetime spectroscopy (PALS) to study the defect chemistry of Y-doped and Sc-doped BaZrO 3 . Using a two-state positron trapping model we showed that PALS can be used to study the defect chemistry of hydrated dense proton conductors. Positron trapping rates and lifetimes were correlated with doping levels of the materials. Probability significance t-tests were carried out for PALS parameters to verify whether there are differences/similarities for various populations: non-doped/doped, level and type of doping, high temperature, and surface effects. Further, the results revealed that the initial doping generates a significant number of traps available for positrons. Doping in yttrium increased the positron trapping rate, while this effect was not observed with scandium. Low-temperature hydration affects specimens significantly inhibiting positron trapping at undoped BaZrO 3 material and highly doped specimens. Positronium formation in rough surface layers, and highly doped specimens was detected but does not exceed 1%.

36 MATERIALS SCIENCE↗
DOE OSTI2013

The intense slow positron beam facility at the PULSTAR reactor and applications in nano-materials study

An intense slow positron beam has been established at the PULSTAR nuclear research reactor of North Carolina State University. The slow positrons are generated by pair production in a tungsten moderator from gammarays produced in the reactor core and by neutron capture reactions in cadmium. The moderated positrons are electrostatically extracted and magnetically guided out of the region near the core. Subsequently, the positrons are used in two spectrometers that are capable of performing positron annihilation lifetime spectroscopy (PALS) and positron Doppler broadening spectroscopy (DBS) to probe the defect and free volume properties of materials. One of the spectrometers (e{sup +}-PALS) utilizes an rf buncher to produce a pulsed beam and has a timing resolution of 277 ps. The second spectrometer (Ps-PALS) uses a secondary electron timing technique and is dedicated to positronium lifetime measurements with an approximately 1 ns timing resolution. PALS measurements have been conducted in the e{sup +}-PALS spectrometer on a series of nano-materials including organic photovoltaic thin films, membranes for filtration, and polymeric fibers. These studies have resulted in understanding some critical issues related to the development of the examined nano-materials.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

Mode coupling and multiquantum vibrational excitations in Feshbach-resonant positron annihilation in molecules

The dominant mechanism of low-energy positron annihilation in polyatomic molecules is through positron capture in vibrational Feshbach resonances (VFR). In this paper, we investigate theoretically the effect of anharmonic terms in the vibrational Hamiltonian on positron annihilation rates. Such interactions enable positron capture in VFRs associated with multiquantum vibrational excitations, leading to enhanced annihilation. Mode coupling can also lead to faster depopulation of VFRs, thereby reducing their contribution to the annihilation rates. To analyze this complex picture, we use coupled-cluster methods to calculate the anharmonic vibrational spectra and dipole transition amplitudes for chloroform, chloroform-d 1 , 1,1-dichloroethylene, and methanol, and use these data to compute positron resonant annihilation rates for these molecules. Theoretical predictions are compared with the annihilation rates measured as a function of incident positron energy. Overall, the results demonstrate the importance of mode coupling in both enhancement and suppression of the VFR. There is also experimental evidence for the direct excitation of multimode VFR. Their contribution is analyzed using a statistical approach, with an outlook towards more accurate treatment of this phenomenon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Ultrashort megaelectronvolt positron beam generation based on laser-accelerated electrons

Experimental generation of ultrashort MeV positron beams with high intensity and high density using a compact laser-driven setup is reported. A high-density gas jet is employed experimentally to generate MeV electrons with high charge; thus, a charge-neutralized MeV positron beam with high density is obtained during laser-accelerated electrons irradiating high-Z solid targets. It is a novel electron–positron source for the study of laboratory astrophysics. Meanwhile, the MeV positron beam is pulsed with an ultrashort duration of tens of femtoseconds and has a high peak intensity of 7.8 × 10{sup 21} s{sup −1}, thus allows specific studies of fast kinetics in millimeter-thick materials with a high time resolution and exhibits potential for applications in positron annihilation spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

On the existence and stability of electrostatic structures in non-Maxwellian electron-positron-ion plasmas

Electrostatic solitary waves in plasmas are the focus of many current studies of localized electrostatic disturbances in both laboratory and astrophysical plasmas. Here, an investigation of the nonlinear dynamics of plasma evolving in two dimensions, in the presence of excess superthermal background electrons and positrons, is undertaken. We investigate the effect of a magnetic field on weakly nonlinear ion acoustic waves. Deviation from the Maxwellian distribution is effectively modelled by the kappa model. A linear dispersion relation is derived, and a decrease in frequency and phase speed in both parallel and perpendicular modes can be seen, when the proportion of positrons to electrons increases. We show that ion acoustic solitary waves can be generated during the nonlinear evolution of a plasma fluid, and their nonlinear propagation is governed by a Zakharov-Kuznetsov (ZK) type equation. A multiple scales perturbation technique is used to derive the ZK equation. The solitary wave structures are dependent on the relation between the system parameters, specifically the superthermality of the system, the proportion of positron content, magnetic field strength, and the difference between electron and positron temperature. The parametric effect of these on electrostatic shock structures is investigated. In particular, we find that stronger superthermality leads to narrower excitations with smaller potential amplitudes. Increased positron concentration also suppresses both the amplitude and the width of solitary wave structures. However, the structures are only weakly affected by temperature differentials between electrons and positrons in our model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

The positron excess as a smoking gun for dynamical dark matter?

One of the most puzzling aspects of recent data from the AMS-02 experiment is an apparent rise in the cosmic-ray positron fraction as a function of energy. This feature is observed out to energies of approximately 350 GeV. One explanation of these results interprets the extra positrons as arising from the decays of dark-matter particles. This in turn typically requires that such particles have rather heavy TeV-scale masses and not undergo simple two-body decays to leptons. In this talk, by contrast, we show that Dynamical Dark Matter (DDM) can not only match existing AMS-02 data on the positron excess, but also accomplish this feat with significantly lighter dark-matter constituents undergoing simple two-body decays to leptons. We also demonstrate that the Dynamical Dark Matter framework makes a fairly robust prediction that the positron fraction should level off and then remain roughly constant out to approximately 1 TeV, without experiencing any sharp downturns. Thus, if we interpret the positron excess in terms of decaying dark matter, the existence of a plateau in the positron fraction at energies less than 1 TeV may be taken as a “smoking gun” of Dynamical Dark Matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

High-flux low-divergence positron beam generation from ultra-intense laser irradiated a tapered hollow target

By using two-dimensional particle-in-cell simulations, we demonstrate high-flux dense positrons generation by irradiating an ultra-intense laser pulse onto a tapered hollow target. By using a laser with an intensity of 4 × 10{sup 23 }W/cm{sup 2}, it is shown that the Breit-Wheeler process dominates the positron production during the laser-target interaction and a positron beam with a total number >10{sup 15} is obtained, which is increased by five orders of magnitude than in the previous work at the same laser intensity. Due to the focusing effect of the transverse electric fields formed in the hollow cone wall, the divergence angle of the positron beam effectively decreases to ∼15° with an effective temperature of ∼674 MeV. When the laser intensity is doubled, both the positron flux (>10{sup 16}) and temperature (963 MeV) increase, while the divergence angle gets smaller (∼13°). The obtained high-flux low-divergence positron beam may have diverse applications in science, medicine, and engineering.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Numerical analysis of electrostatic ion cyclotron instability in an electron-positron-ion plasma

This paper presents a theoretical study of the effects of positron density on the electrostatic ion cyclotron instability in an electron-positron-ion plasma using the kinetic theory approach. It is supposed that positrons and electrons can drift parallel to the magnetic field either in the same or the opposite directions. The dispersion relation for the electrostatic ion cyclotron waves in an electron-positron-ion plasma is derived, and the numerical results are investigated. It is found that an increase in positron concentration increases the critical drift velocity for excitation of the instability in both configurations. It is also found that as the positron concentration increases the growth rate of instability decreases. In addition, it is shown that at low velocities the maximum instability growth rate for the unidirectional case is higher than the counter-streaming case; however, after a certain velocity, the maximum growth rate in the counter-streaming case dominates that of the unidirectional case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2012

PhytoBeta imager: a positron imager for plant biology

Several positron emitting radioisotopes such as 11C and 13N can be used in plant biology research. The 11CO2 tracer is used to facilitate plant biology research toward optimization of plant productivity, biofuel development and carbon sequestration in biomass. Positron emission tomography (PET) imaging has been used to study carbon transport in live plants using 11CO2. Because plants typically have very thin leaves, little medium is present for the emitted positrons to undergo an annihilation event. The emitted positrons from 11C (maximum energy 960 keV) could require up to approximately 4 mm of water equivalent material for positron annihilation. Thus many of the positrons do not annihilate inside the leaf, resulting in limited sensitivity for PET imaging. To address this problem we have developed a compact beta-positive, beta-minus particle imager (PhytoBeta imager) for 11CO2 leaf imaging. The detector is based on a Hamamatsu H8500 position sensitive photomultiplier tube optically coupled via optical grease to a 0.5 mm thick Eljen EJ-212 plastic scintillator. The detector is equipped with a flexible arm to allow its placement and orientation over or under the leaf to be studied while maintaining the leaf's original orientation. To test the utility of the system the detector was used to measure carbon translocation in a leaf of the spicebush (Lindera benzoin) under two transient light conditions.

09 BIOMASS FUELS↗
DOE OSTI2018

Trapped Positrons and Electrons in the Inner Radiation Belt According to Data of the PAMELA Experiment

Measurements of secondary-electron and secondary-positron fluxes below the geomagnetic cutoff in near-Earth space were performed by means of the PAMELA magnetic spectrometer installed on board the Resurs-DK1 satellite launched on June 15, 2006, in an elliptical orbit of inclination 70° and altitude 350 to 600 km. This spectrometer permits measuring the fluxes of electrons and positrons over a wide energy range, as well as determining their spatial distributions to a precision of about 2°. A calculation of particle trajectories in the geomagnetic field makes it possible to separate electrons and positrons originating from cosmic-ray interactions in the Earth’s magnetosphere. The spatial distributions of quasitrapped, trapped, and short-lived albedo positrons and electrons of energy above 70 MeV in the radiation belt were analyzed. The ratio of the electron-to-positron fluxes and the energy spectra of the electrons and positrons in question are indicative of different productionmechanisms for stably trapped and quasitrapped secondary particles.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Nonlinear dust-acoustic structures in space plasmas with superthermal electrons, positrons, and ions

Some features of nonlinear dust-acoustic (DA) structures are investigated in a space plasma consisting of superthermal electrons, positrons, and positive ions in the presence of negatively charged dust grains with finite-temperature by employing a pseudo-potential technique in a hydrodynamic model. For this purpose, it is assumed that the electrons, positrons, and ions obey a kappa-like (κ) distribution in the background of adiabatic dust population. In the linear analysis, it is found that the dispersion relation yield two positive DA branches, i.e., the slow and fast DA waves. The upper branch (fast DA waves) corresponds to the case in which both (negatively charged) dust particles and (positively charged) ion species oscillate in phase with electrons and positrons. On the other hand, the lower branch (slow DA waves) corresponds to the case in which only dust particles oscillate in phase with electrons and positrons, while ion species are in antiphase with them. On the other hand, the fully nonlinear analysis shows that the existence domain of solitons and their characteristics depend strongly on the dust charge, ion charge, dust temperature, and the spectral index κ. It is found that the minimum/maximum Mach number increases as the spectral index κ increases. Also, it is found that only solitons with negative polarity can propagate and that their amplitudes increase as the parameter κ increases. Furthermore, the domain of Mach number shifts to the lower values, when the value of the dust charge Z{sub d} increases. Moreover, it is found that the Mach number increases with an increase in the dust temperature. Our analysis confirms that, in space plasmas with highly charged dusts, the presence of superthermal particles (electrons, positrons, and ions) may facilitate the formation of DA solitary waves. Particularly, in two cases of hydrogen ions H{sup +} (Z{sub i} = 1) and doubly ionized Helium atoms He{sup 2+} (Z{sub i} = 2), the mentioned results are the same. Additionally, the mentioned dusty plasma does not support DA solitons with positive polarity (compressive solitons). Furthermore, our analysis confirms that DA double layers cannot exist in such a system. Moreover, the positron density has not a considerable effect on the behavior of DA solitons in our model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Possible Counterpart Signal of the Fermi Bubbles at the Cosmic-Ray Positrons

The inner Galaxy has hosted cosmic-ray burst events, including those responsible for the gamma-ray Fermi bubbles and the eROSITA bubbles in X-rays. In this work, we study the Alpha Magnetic Spectrometer positron fraction and find three features around 12, 21, and 48 GeV, of which the lowest energy has a 1.4–4.9σ significance, depending on astrophysical background assumptions. Using background simulations that explain the cosmic-ray positron fraction, positron flux, and electron plus positron flux by primary and secondary cosmic rays and cosmic rays from local pulsars, we test these spectral features as originating from electron/positron burst events from the inner Galaxy. We find the 12 GeV feature to be explained by an event of age τ ≃ 3–10 Myr, in agreement with the proposed age of the Fermi bubbles. Furthermore, the energy in cosmic-ray electrons and positrons propagating along the Galactic disk and not within the Fermi bubbles volume is estimated to be 10 51.5 –10 57.5 erg, or O(10 –4 ) – O(1) the cosmic-ray energy causing the Fermi bubbles. We advocate that these positron fraction features are the counterpart signals of the Fermi bubbles, or of substructures within them, or of the eROSITA bubbles.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

PEPPo: Using a Polarized Electron Beam to Produce Polarized Positrons

Polarized positron beams have been identified as either an essential or a significant ingredient for the experimental program of both the present and next generation of lepton accelerators (JLab, Super KEK B, ILC, CLIC). An experiment demonstrating a new method for producing polarized positrons has been performed at the Continuous Electron Beam Accelerator Facility at Jefferson Lab. The PEPPo (Polarized Electrons for Polarized Positrons) concept relies on the production of polarized e⁻/e⁺ pairs from the bremsstrahlung radiation of a longitudinally polarized electron beam interacting within a high-Z conversion target. PEPPo demonstrated the effective transfer of spin-polarization of an 8.2 MeV/c polarized (P~85%) electron beam to positrons produced in varying thickness tungsten production targets, and collected and measured in the range of 3.1 to 6.2 MeV/c. In comparison to other methods this technique reveals a new pathway for producing either high-energy or thermal polarized positron beams using a relatively low polarized electron beam energy (~10MeV) .This presentation will describe the PEPPo concept, the motivations of the experiment and high positron polarization achieved.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

A buffer-gas trap for the NEPOMUC positron beam: optimization studies with electrons

Buffer-gas traps (BGTs) use inelastic interactions with nitrogen molecules to capture positrons from a continuous beam. These devices are invaluable for high-resolution studies of matter–antimatter interactions, antihydrogen research and positronium laser spectroscopy. We present a new project with the goal of producing a non-neutral plasma containing ${\sim }10^8$ low-energy positrons by installing a BGT on the NEPOMUC (NEutron induced POsitron source MUniCh) high-intensity positron beam. Details of the BGT are outlined and results are presented from experiments in which an electron beam, with a similar intensity and energy spread to the remoderated NEPOMUC beam, was used to create pulses of non-neutral electron plasma. The device is a vital component of the APEX (A Positron Electron eXperiment) project, which aims to create a low-temperature electron–positron pair plasma.

Physics↗