Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PORPHYRINS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Naphthodithiophene‐Fused Porphyrins: Synthesis, Characterization, and Impact of Extended Conjugation on Aromaticity

The fusion of tetrapyrroles with aromatic heterocycles constitutes a useful tool for manipulating their opto-electronic properties. In this work, the synthesis of naphthodithiophene-fused porphyrins was achieved through a Heck reaction-based cascade of steps followed by the Scholl reaction. The naphthodithiophene-fused porphyrins display a unique set of optical and electronic properties. Fusion of the naphtho[2,1-b:3,4-b’]dithiophene to porphyrin (F2VTP) leads to a ~20% increase in the fluorescence lifetime, which is accompanied, unexpectedly, by a more than two-fold drop in the emission quantum yield (ϕ=0.018). In contrast, fusion of the isomeric naphtho[1,2-b:4,3-b’]dithiophene to porphyrin (F3VPT) results in a ~1.5-fold increase in the fluorescence quantum yield (ϕ=0.13) with a concomitant ~30 % increase in the fluorescence lifetime. This behavior suggests that fusion of the porphyrin with the naphthodithiopheno-system mainly affects the radiative rate constant in the Q-state deactivation pathway, where the effects of the isomeric naphtho[2,1-b:3,4-b’]dithiophene- versus naphtho[1,2-b:4,3-b’]dithiophene-fusion are essentially the opposite. Interestingly, nucleus-independent chemical shifts analysis revealed a considerable difference between the aromaticities of these two isomeric systems. Furthermore, our results demonstrate that subtle structural differences in the fused components of the porphyrin can be reflected in rather significant differences between the photophysical properties of the resulting systems.

Chemistry↗
DOE OSTI2017

pH-Dependent Assembly of Porphyrin–Silica Nanocomposites and Their Application in Targeted Photodynamic Therapy

Structurally controlled nanoparticles, such as core–shell nanocomposite particles by combining two or more compositions, possess enhanced or new functionalities that benefited from the synergistic coupling of the two components. In this paper, we report new nanocomposite particles with self-assembled porphyrin arrays as the core surrounded by amorphous silica as the shell. The synthesis of such nanocomposite nanoparticles was conducted through a combined surfactant micelle confined self-assembly and silicate sol–gel process using optically active porphyrin as a functional building block. Depending on kinetic conditions, these particles exhibit structure and function at multiple length scales and locations. At the molecular scale, the porphyrins as the building blocks provide well-defined macromolecular structures for noncovalent self-assembly and unique chemistry for high-yield generation of singlet oxygen for photodynamic therapy (PDT). On the nanoscale, controlled noncovalent interactions of the porphyrin building block result in an extensive self-assembled porphyrin network that enables efficient energy transfer and impressive fluorescence for cell labeling, evidenced by absorption and photoluminescence spectra. The thin silicate shell on the nanoparticle surface allows easy functionalization, and the resultant targeting porphyrin-silica nanocomposites can selectively destroy tumor cells upon receiving light irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

“Antenna-like” Light-Harvesting in Partially Metalated Porphyrin Hydrogen-Bonded Organic Frameworks

Arrays of light harvesting molecules with long-range order hold promise as materials capable of efficient collection of photons as well as rapid transport of captured solar energy to chemical catalysts. Hydrogen-bonded organic frameworks (HOFs) could be promising artificial light-harvesting platforms, due to their crystalline nature and their comparative ease of synthesis. In this work, mixed-linkers of either zinc-metallated or free base tetrakis(4-carboxyphenyl)porphyrin HOFs were examined and found to demonstrate ‘antenna-like’ light harvesting behavior. Using time-resolved emission spectroscopy, Förster resonance energy transfer from zinc porphyrin to free-base porphyrin was assessed. Based on changes in the emission peak profile as the ratio of zinc porphyrin to free-base porphyrin is varied, we find that, in the limit of 100% zinc porphyrin, a photogenerated exciton can sample ~48 chromophores. These findings suggest that stacked linkers within HOFs can act as light harvesting ‘antennae’ and with encapsulation of suitable catalysts, may offer prospective application as photochemical energy conversion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Synthesis of Self-Assembled Porphyrin Nanoparticle Photosensitizers

The use of nanoparticles as a potential building block for photosensitizers has recently become a focus of interest in the field of photocatalysis and photodynamic therapy. Porphyrins and their derivatives are effective photosensitizers due to extended π-conjugated electronic structure, high molar absorption from visible to near-infrared spectrum, and high singlet oxygen quantum yields as well as chemical versatility. In this work, we report a synthesis of self-assembled porphyrin nanoparticle photosensitizers using zinc meso-tetra(4-pyridyl)porphyrin (ZnTPyP) through a confined noncovalent self-assembly process. Scanning electron microscopy reveals formation of monodisperse cubic nanoparticles. UV–vis characterizations reveal that optical absorption of the nanoparticles exhibits a red shift due to noncovalent self-assembly of porphyrins, which not only effectively increase intensity of light absorption but also extend light absorption broadly covering visible light for enhanced photodynamic therapy. Electron spin-resonance spectroscopy (ESR) studies show the resultant porphyrin nanoparticles release a high yield of singlet oxygen. Nitric oxide (NO) coordinates to central metal Zn ions to form stabilized ZnTPyP@NO nanoparticles. We show that under light irradiation ZnTPyP@NO nanoparticles release highly reactive peroxynitrite molecules that exhibit enhanced antibacterial photodynamic therapy (APDT) activity. Finally, the ease of the synthesis of self-assembled porphyrin nanoparticles and light-triggered release of highly reactive moieties represent a completely different photosensitizer system for APDT application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Cooperative self-assembly of porphyrins and derivatives

We report there has been widespread recent interest in self-assembly and synthesis of porphyrin and its derivatives-based ordered arrays aiming to emulate natural light-harvesting processes and energy storage. However, technologies that leverage the structural advantages of individual porphyrins have not been fully realized and have been limited by available synthesis methods. This article provides general perspectives on porphyrin and derivative chemistry, and discussions on surfactant-assisted cooperative self-assembly using amphiphilic surfactants and functional porphyrins and derivatives. The cooperative self-assembly amplifies the intrinsic advantages of individual porphyrins by engineering them into well-defined one-dimensional–three-dimensional (1D–3D) nanostructures. Surfactant-assisted self-assembly of amphiphilic surfactants and porphyrins has been utilized to form well-defined “micelle-like” nanostructures. Lastly, driven by intermolecular interactions, subsequent nucleation and growth confined within these nanostructures lead to the formation of 1D–3D ordered optically and electrically active nanomaterials with structure and function on multiple length scales.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Synthesis of porphyrin nanostructures

The present disclosure generally relates to self-assembly methods for generating porphyrin nanostructures. For example, in one embodiment a method is provided that includes preparing a porphyrin solution and a surfactant solution. The porphyrin solution is then mixed with the surfactant solution at a concentration sufficient for confinement of the porphyrin molecules by the surfactant molecules. In some embodiments, the concentration of the surfactant is at or above its critical micelle concentration (CMC), which allows the surfactant to template the growth of the nanostructure over time. The size and morphology of the nanostructures may be affected by the type of porphyrin molecules used, the type of surfactant used, the concentration of the porphyrin and surfactant the pH of the mixture of the solutions, and the order of adding the reagents to the mixture, to name a few variables.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Radiative Deactivation of Lowest Singlet and Triplet Excited States of Water-Soluble Porphyrins

Radiative deactivation of lowest excited triplet and singlet states for series of free bases and Zn{sup 2+}-complexes of water-soluble 5,10,15,20-tetrakis-(4-sulfonatophenyl)porphyrin (H{sub 2}T4SPP); 5,10,15,20-tetrakis-(4-N-alkylpyridyl) porphyrin (H{sub 2}T4AlkPyP); and 5,10,15,20-tetrakis-(3-N-alkylpyridyl)porphyrin (H{sub 2}T3AlkPyP) was studied in solutions at 77 and 293 K. The fluorescence and phosphorescence quantum yields were found to have small but detectable differences for derivatives of the same porphyrin ligand with different counterions for the ionized aryl substituents. It was shown that these differences were due to spin–orbit coupling effects and variation of the electron donor/acceptor properties of the peripheral substituents that changed the electronic energy levels in the porphyrin–counterion system.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Chromatographic isolation of vanadyl porphyrins from heavy oil resins

A broad fraction of petroleum vanadyl porphyrins of high spectral purity was isolated from heavy oil resins with high vanadium content using a two-step chromatographic method. At the first step, the primary concentrate of vanadyl porphyrins was separated from the resins on the silica gel column. At the second step, it was further purified by the gradient elution through the column packed with sulfo-cationite. According to UV—VIS spectroscopy, this technique allows one to isolate up to 70% of vanadyl porphyrins with the spectral purity corresponding to the best results of other purification methods providing only narrow fractions of vanadyl porphyrins of comparable purity. Deoxophylloerythroetioporphyrin (DPEP) and etioporphyrin (Etio) series of vanadyl porphyrins with the carbon number range of C{sub 28}—C{sub 42} and DPEP/ Etio ratio equal to 1.18 were identified by MALDI-TOF mass-spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A historical perspective on porphyrin-based metal–organic frameworks and their applications

Porphyrins are important molecules widely found in nature in the form of enzyme active sites and visible light absorption units. Recent interest in using these functional molecules as building blocks for the construction of metal–organic frameworks (MOFs) have rapidly increased due to the ease in which the locations of, and the distances between, the porphyrin units can be controlled in these porous crystalline materials. Porphyrin-based MOFs with atomically precise structures provide an ideal platform for the investigation of their structure–function relationships in the solid state without compromising accessibility to the inherent properties of the porphyrin building blocks. Here, this review will provide a historical overview of the development and applications of porphyrin-based MOFs from early studies focused on design and structures, to recent efforts on their utilization in biomimetic catalysis, photocatalysis, electrocatalysis, sensing, and biomedical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Selective Ligand Modification of Cobalt Porphyrins for Carbon Dioxide Electrolysis: Generation of a Renewable H2/CO Feedstock for Downstream Catalytic Hydrogenation

Catalytic hydrogenation is an attractive approach to produce green fuels and chemicals. The building blocks for these processes may be effectively produced from renewable power via direct electrochemical reduction of carbon dioxide in an aqueous media. For the first time, the impact of increasing the local proton concentration of cobalt porphyrin was examined by synthesizing new cobalt porphyrins 2, Co(o-OCH3)TPP and cobalt porphyrin 3, Co(o-OH)TPP. Cobalt porphyrins coated on carbon paper converted carbon dioxide and water into a mixture of hydrogen and carbon monoxide in an aqueous electrolyte at near neutral pH. Increasing the local proton availability of the commercial cobalt porphyrin 1, accelerates hydrogen generation under heterogeneous conditions across the range of potentials tested (-0.85 to -1.5 V vs. Ag/AgCl) and demonstrates high Faradaic efficiencies (ca. 90%) at low over-potentials (ca. 540 mV). The culmination of this work can help identify key parameters that facilitate generation of sustainable reagents for catalytic hydrogenation under practical and scalable conditions.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2016

Engendering Long-Term Air and Light Stability of a TiO2-Supported Porphyrinic Dye via Atomic Layer Deposition

Organic and porphyrin-based chromophores are prevalent in liquid-junction photovoltaic and photocatalytic solar-cell chemistry; however, their long-term air and light instability may limit their practicality in real world technologies. Here, we describe the protection of a zinc porphyrin dye, adsorbed on nanoparticulate TiO2, from air and light degradation by a protective coating of alumina grown with a previously developed post-treatment atomic layer deposition (ALD) technique. The protective Al2O3 ALD layer is deposited using dimethylaluminum isopropoxide as an Al source; in contrast to the ubiquitous ALD precursor trimethylalurninum, dimethylaluminum isopropoxide does not degrade the zinc porphyrin dye, as confirmed by UV vis measurements. The growth of this protective ALD layer around the dye can be monitored by an in-reactor quartz crystal microbalance (QCM). Furthermore, greater than 80% of porphyrin light absorption is retained over month of exposure to air and light when the protective coating is present, whereas almost complete loss of porphyrin absorption is observed in less than 2 days in the absence of the ALD protective layer. Applying the Al2O3 post-treatment technique to the TiO2-adsorbed dye allows the dye to remain in electronic contact with both the semiconductor surface and a surrounding electrolyte solution, the combination of which makes this technique promising for numerous other electrochemical photovoltaic and photocatalytic applications, especially those involving the dye-sensitized evolution of oxygen.

atomic layer deposition↗
DOE OSTI2018

A low-bandgap dimeric porphyrin molecule for 10% efficiency solar cells with small photon energy loss

Dimeric porphyrin molecules have great potential as donor materials for high performance bulk heterojunction organic solar cells (OSCs). Recently reported dimeric porphyrins bridged by ethynylenes showed power conversion efficiencies (PCEs) of more than 8%. In this study, we design and synthesize a new conjugated dimeric D–A porphyrin ZnP2BT-RH, in which the two porphyrin units are linked by an electron accepting benzothiadiazole (BT) unit. The introduction of the BT unit enhances the electron delocalization, resulting in a lower highest occupied molecular orbital (HOMO) energy level and an increased molar extinction coefficient in the near-infrared (NIR) region. The bulk heterojunction solar cells with ZnP2BT-RH as the donor material exhibit a high PCE of up to 10% with a low energy loss (E loss ) of only 0.56 eV. Finally, the 10% PCE is the highest for porphyrin-based OSCs with a conventional structure, and this E loss is also the smallest among those reported for small molecule-based OSCs with a PCE higher than 10% to date.

14 SOLAR ENERGY↗
DOE OSTI2025

Substituent effect on napthodithiophene-fused porphyrins: Understanding the unusual trend of fluorescence quantum yield quenching

A series of π-extended porphyrins containing thiophene units was prepared to investigate an unusual trend observed in the fluorescence quantum yield of naphtho[2,1-b:3,4-b']dithiophene-fused porphyrins. Monobenzoporphyrins carrying 2-thiophenyl (vinyl thiophene porphyrin) groups (2VTP, 2VTBr and Br2VTP) (numbering 2 and 3 refers to the position of sulfur on the thiophene ring) were synthesized through a Heck-based cascade reaction followed by a newly developed bromination method. These were converted to naphtho[2,1-b:3,4-b']dithiophene-fused porphyrin derivatives (FBr2VTP and F2VTBr) via ring closure with an intramolecular Scholl reaction. Increasingly larger Stokes shifts with a higher number of bromo groups were observed in the unfused π-extended molecular systems, reflecting the heavy atom effect. Fluorescence spectroscopy further confirmed the unusual trend seen in the previous work: structural rigidification in naphtho[2,1-b:3,4-b']dithiophene-fused porphyrins leads to longer fluorescence lifetimes but unexpectedly lowers the quantum yield. Adding one bromo group to the naphtho[2,1-b:3,4-b']dithiophene unit does not change this trend. Furthermore, the presence of two bromo groups prevents the quantum yield from dropping. DFT, TDDFT, and NICS analyses suggest a drastic change in aromaticity in the pyrrole ring where the naphtho[2,1-b:3,4-b']dithiophene is fused in FBr2VTP, which might contribute to the quantum yield reductions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Highly Efficient Cooperative Catalysis by Co III (Porphyrin) Pairs in Interpenetrating Metal-Organic Frameworks

A series of porous twofold interpenetrated In-Co III (porphyrin) metal–organic frameworks (MOFs) were constructed by in situ metalation of porphyrin bridging ligands and used as efficient cooperative catalysts for the hydration of terminal alkynes. The twofold interpenetrating structure brings adjacent Co III (porphyrins) in the two networks parallel to each other with a distance of about 8.8 Å, an ideal distance for the simultaneous activation of both substrates in alkyne hydration reactions. As a result, the In-Co III (porphyrin) MOFs exhibit much higher (up to 38 times) catalytic activity than either homogeneous catalysts or MOF controls with isolated Co III (porphyrin) centers, thus highlighting the potential application of MOFs in cooperative catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Inserting Porphyrin Quantum Dots in Bottom-Up Synthesized Graphene Nanoribbons

Diels–Alder copolymerization of tetraphenylcyclopentadienone, a precursor for cove graphene nanoribbons (cGNRs), with bifunctional porphyrins yields defined nanostructures comprised of a single cGNR-porphyrin-cGNR heterojunction within each ribbon. 13 C NMR labeling and high-resolution mass spectrometry of solubilized polymer intermediates indicates that every porphyrin is covalently linked to two extended segments of cGNRs. UV/Vis absorption and fluorescence emission spectroscopy reveal a strong electronic correlation between the porphyrin and the adjacent cGNR segments that can be attenuated through reversible metalation of the porphyrin core. This versatile bottom-up synthetic strategy provides access to structurally well-defined, functional GNR-quantum dot-GNR heterostructures within a single graphene nanoribbon.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Ligand Noninnocence in Nickel Porphyrins: Nickel Isobacteriochlorin Formation under Hydrogen Evolution Conditions

Here, an electron-deficient nickel porphyrin complex undergoes facile ring reduction to form a nickel isobacteriochlorin complex under hydrogen evolution conditions. Spectroscopic experiments indicate that the reduced nickel porphyrin undergoes subsequent reduction and protonation to form a phlorin anion rather than a metal hydride, demonstrating that the key initial proton-coupled electron transfer step is directed toward the ligand versus the metal. The phlorin anion facilely converts to the isobacteriochlorin in the presence of two-electron and three-proton equivalents. Cyclic voltammetry (CV) and spectroscopic experiments reveal that the four-electron, four-proton electrochemical reduction of nickel porphyrin to isobacteriochlorin occurs promptly in the presence of the strong proton donor tosic acid, followed by hydrogen evolution reaction (HER) catalysis at slightly more negative potentials. CVs of independently synthesized Ni isobacteriochlorin show a catalytic HER at the same potentials as those observed for the HER in CVs of the Ni porphyrin. We discover that, under strongly acidic conditions, the HER catalysis arises from conversion of the Ni isobacteriochlorin into a nickel-containing, catalytically active electrode-adsorbed species. These results show that Ni porphyrin converts to Ni isobacteriochlorin under HER catalysis conditions via a ligand-based PCET process and that it is the isobacteriochlorin complex which gives rise to an active HER catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Charge Transfer and Recombination Pathways through Fullerene Guests in Porphyrin-Based MOFs

Porphyrin-based metal–organic frameworks (MOFs) offer a unique platform for building porous donor–acceptor networks that exhibit long-lived charge separation and transport upon incorporation of electron acceptor guest species. Here, in this work, porphyrin-based MOFs, PCN-222(H 2 ) and PCN-222(Zn), synthesized as nanoparticle suspensions, are successfully infiltrated with fullerene acceptor molecules, C 60 or PC 61 BM, in both polar and nonpolar solvent environments. The location and relative binding strength of these guest species are evaluated through a combination of N 2 physisorption measurements, photoluminescence quenching, and UV–vis absorption titration experiments. Semiempirical tight binding calculations are used to screen potential locations of the fullerene guest within the MOF pores, and hybrid density functional theory (DFT)-computed interaction energies confirm the energetically favorable positions. The fundamental photophysics of these donor–acceptor host–guest combinations are probed using ultrafast transient absorption spectroscopy. Sub-picosecond electron transfer involving initial exciplex population is observed, with slow charge recombination lifetimes on the order of τ ~1 ns for all systems in both dimethylformamide and 1,4-dioxane. Charge recombination occurs through population of fullerene and/or framework porphyrin triplet states depending on the porphyrin metalation status. The photophysics of the fullerene-loaded MOFs are discussed in the context of relevant porphyrin–fullerene donor–acceptor molecules to highlight the unique role of the framework environment in dictating photoinduced electron transfer and decay pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unveiling the mechanism of the photocatalytic reduction of CO 2 to formate promoted by porphyrinic Zr-based metal–organic frameworks

A complete picture of the reaction mechanism responsible for the photocatalytic reduction of CO 2 into formate promoted by the Zr-based porphyrinic MOF-545 (PCN-222) in acetonitrile/triethanolamine (CH 3 CN/TEOA) solutions is provided for the first time by combining experimental and computational approaches. Firstly, we combined the metalation of the porphyrin linkers and the synthesis under microwave conditions of nano-sized materials (150–200 nm) to reach one of the highest CO 2 RR activities under visible light irradiation reported so far for a MOF-based catalyst in terms of formate production (identified in all cases as the sole product), i.e., 6000 μmol g –1 after 4 h for the NanoMOF-545(Fe). A thorough mechanistic study of CO 2 RR is provided afterwards, which elucidated the respective roles of TEOA, porphyrin linkers and Zr 6 -nodes. Photophysical measurements of both metalated and unmetalated MOFs excluded the prevailing belief of ligand-to-Zr 6 cluster charge-transfer state formation, while bulk photolysis proved that the porphyrinic linkers of the MOF promote the photooxidation of TEOA under catalytic conditions. DFT calculations allowed characterization with atomistic detail of a novel reaction mechanism whereby TEOA˙ radicals generated photochemically at the porphyrinic linkers play the crucial role of transferring a formal hydride to a CO 2 molecule activated on a Zr IV center, which acts as a Lewis acid. Notably, this mechanism backed by additional experimental assays explains the experimental activity trends observed upon metalation, on the basis of the ability of the materials to accomplish the photo-oxidation of TEOA. Here, while elucidating the reaction pathways at work in Zr 6 -based MOFs with chromophore linkers, the findings reported herein pinpoint new mechanistic features capable of rationalizing other light-driven reactions making use of TEOA (or structurally related donors) and ultimately, inspire the bottom-up design of new catalysts and catalytic routes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗