Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PORE STRUCTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Macrovoid resolved simulations of transport through HPRO relevant membrane geometries

Modeling the transport properties such as diffusivity and permeability of high pressure reverse osmosis (HPRO) membranes is critical for the selection and manufacture of membranes suitable for operation under high pressure. These properties can be significantly affected by the changes in heterogeneous pore structures due to compaction. Here, the modeling platform presented in this work resolves the two scale porosity in HPRO relevant membranes. A synthetic membrane geometry is constructed based on available experimental visualizations of pore structures. The simulations directly capture the flow channeling that results from a combination of material properties and geometric features of the macrovoids. A parametric study is presented to account for the transition of flow characteristics from a material governed regime to a macrovoid governed regime. Permeability of the membrane is evaluated using the simulation data and compared with an existing model that scales with the square of tortuosity over a range of material properties. The model is found to perform well under a narrow range of tortuosity while deviating from the calculated permeabilities at extreme conditions. The effective permeability of the membrane is found to vary by at least two orders of magnitude between the two flow regimes. It is also observed that tortuosity is a bounded property with its upper limit determined by the macrovoid geometry. Consequently, the tortuosity based correlations fail near a flow regime that is mainly governed by the macrovoids. The modeled permeability can be more than an order of magnitude smaller than the simulation result. A new model based on flux-weighted porosity of a membrane is introduced and its correlation with tortuosity is studied. The model agrees with the simulated data as, in addition to tortuosity, it also accounts for the flux partition within and outside the flow channels. Such correlations enable extending the existing understanding of flow characteristics to enhance predictability of porous media models.

42 ENGINEERING↗
DOE OSTI2021

A Pore‐Scale Investigation of Mineral Precipitation Driven Diffusivity Change at the Column‐Scale

Abstract Mineral precipitation affects the pore structure and thus transport properties of porous media. In this study, we investigated the pore‐scale dynamics of precipitation in diffusion controlled systems and the resulting impacts on the effective diffusivity, using a micro‐continuum reactive transport model. Forty two‐dimensional pore structures representing both idealized and realistic geometries were simulated with consideration of different precipitation scenarios and rates. A homogeneous nucleation scenario reproduced patterns observed in previous experimental study showing mixing‐induced precipitation, and a surface growth scenario captured the pattern for mineral precipitation on a substrate with the same or similar mineral structures. In all cases, local precipitation resulted in the reduction in the average porosity of the domain ( Φ ) until the cessation of diffusive transport and the termination of precipitation. The minimum porosity reached was referred to as the critical porosity ( Φ c ). The effective diffusivity ( D eff ) decreased with Φ and dropped sharply to effectively zero, that is, the critical effective diffusivity ( D eff c ), as Φ c was reached. These pore‐scale dynamics can be captured by a revised relationship that explicitly considers the critical porosity and the corresponding effective diffusivity, and the pre‐exponential coefficient and the exponent of the relationship varied with initial pore structure and the precipitation kinetics. Overall, the homogeneous nucleation scenario results in systematically larger Φ c and coefficients that give rise to a sharper decrease in diffusivity as Φ c is approached, compared to the surface growth scenario. The revised relationship was also implemented at continuum scale and used to examine column scale diffusivity change and reactions.

58 GEOSCIENCES↗
DOE OSTI2021

Electromagnetic wave absorption of multifunctional cementitious composites incorporating polyvinyl alcohol (PVA) fibers and fly ash: Effects of microstructure and hydration

Highlights: • The cementitious composite shows excellent wide-band electromagnetic wave absorption in a frequency range of 2–18 GHz. • The PVA fibers and the fly ash change the dielectric properties of the cementitious composite by Debye polarization. • The iron oxide of the cementitious binders contributes to the magnetic properties of the composites. • The impacts of the microstructure and the hydration of the cementitious composite on its microwave absorption are analyzed. This paper devises a novel method for the adjustment of the pore structure and the hydration of cement to improve the electromagnetic wave absorption of the cementitious composites incorporating polyvinyl alcohol (PVA) fibers and fly ash in a frequency range of 2–18 GHz. The underlying mechanism of the absorption is investigated to explore the possibility of the structural and functional integration of these composites. The electromagnetic parameters of the prepared cementitious composites and those of the raw materials are analyzed in a frequency range of 0.5–18 GHz. Moreover, the pore structure and the chemical environment of the cementitious composites are examined by mercury intrusion porosimetry (MIP), back-scattered electron detector (BSE), and X-ray photoelectron spectroscopy (XPS). The results indicate that the PVA fibers and the high-volume fly ash have a positive effect on electromagnetic wave absorption of the cementitious composites through the adjustment of their pore structure and hydration.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding the microstructural evolution of hypersaline cemented paste backfill with low-field NMR relaxation

Highlights: • Microstructural evolution of CPB, prepared with tap and hypersaline water, is monitored using low-field NMR relaxometry. • T{sub 1} and T{sub 2} NMR relaxation measurements compared with mechanical strength via UCS tests • Hypersaline mixing water results in slower structural evolution and lower mechanical strength. Cemented paste backfill (CPB) comprising mineral tailings, binders and mixing water is an important potential support material in the mining industry. As the mechanical properties of CPB are significantly influenced by its microstructural characteristics the development of measurement tools to better understand its pore structure evolution is important for its increased utilisation. This study reports the application of low-field nuclear magnetic resonance (NMR) relaxation time measurements to characterise the microstructural evolution of CPB materials over 56 days of hydration, contrasting common tap water and hypersaline water (~22 wt% salt) as mixing water. Distinct NMR relaxation time populations were evidenced within each CPB sample, revealing the presence of both capillary (T{sub 1,2} ≈ 10 ms) and gel pore water (T{sub 1,2} ≈ 300–500 μs), with time-dependent relaxation measurements facilitating characterisation of capillary pore structure evolution over the hydration period assessed. Hypersaline samples demonstrated a time-lag in this measured capillary pore evolution, relative to those hydrated with tap water, while pore structure evolution rates were observed to increase with increased CPB binder content. Further, both T{sub 1} and T{sub 2} NMR relaxation times were found to correlate with the uniaxial compressive strength of the CPB materials investigated, facilitating the formulation of a predictive correlation function between NMR relaxation characteristics and mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing carbon dioxide capture under humid conditions by optimizing the pore surface structure

Metal–organic frameworks (MOFs) exhibit significant potential for mitigating carbon emissions due to their high porosity and tunability. Despite numerous reports on CO 2 capture by MOF sorbents, a common challenge is their poor selectivity for CO 2 over water. Moreover, in-depth studies are much needed to elucidate the relationships among the pore surface structure, hydrophobicity, and CO 2 uptake capacity/selectivity. In this work, we investigate the factors influencing CO 2 adsorption capacity and selectivity under humidity in a series of isoreticular pillar-layer structures, Ni 2 (L) 2 (dabco) (L = bdc, ndc, adc). Our study shows that increasing ligand conjugation not only results in increased hydrophobicity, decreased pore size and BET surface area, but also leads to the change of primary binding sites of water molecules and higher binding energy of CO 2 , all of which contribute to largely increased CO 2 uptake capacity under humid conditions. Additionally, increasing ligand conjugation and consequently hydrophobicity slow down and reduce competitive water adsorption drastically. Notably, the MOF made of ligand with the highest conjugation, Ni 2 (adc) 2 (dabco), exhibits significantly enhanced CO 2 adsorption in N 2 /CO 2 binary mixtures under relatively high humidity (50% RH), with an increase of ~31% and ~36% for the composition of 15/85 and 50/50, respectively, compared to dry conditions. An experimental FTIR study and DFT theoretical calculations confirm that H 2 O occupies different primary binding site in Ni 2 (bdc) 2 (dabco) and Ni 2 (adc) 2 (dabco), and under humid conditions a higher binding energy of CO 2 is achieved with preferential H 2 O/CO 2 co-adsorption in Ni 2 (adc) 2 (dabco), potentially creating additional adsorption sites for CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modeling of linear nanopores in a-SiO 2 tuning pore surface structure

Here, new strategies are presented for the generation of models for linear nanopores in amorphous silica (a-SiO 2 ) with surface structure tuned to match experimental observations. Specifically, the models successfully target not only the overall density of surface silanol groups, but also the proportion of geminal versus mono silanols for which additional experimental NMR data is reported. The latter quantity has not been appropriately described in previous modeling, and in fact has typically not been considered. Strategies include “pore drilling” of bulk a-SiO 2 , and “cylindrical resist” methodology forming a-SiO 2 around a cylindrical exclusion region, followed by dehydroxylation and hydroxylation processes, respectively. However, these latter processes must be judiciously tailored in order to tune the proportion of geminals, in addition to the overall silanol density, to achieve experimental values. Such tailoring has not been incorporated into previous modeling. Another approach considered tunes surface structure of pores obtained by “pore drilling” through mild annealing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of Ink Formulation on Construction of Catalyst Layers for High-Performance Polymer Electrolyte Membrane Fuel Cells

Rational design of catalyst layers in a membrane electrode assembly (MEA) is crucial for achieving high-performance polymer electrolyte membrane fuel cells. Establishing a clear understanding of the property (catalyst ink)–structure (catalyst layer)–performance (MEA) relationship lays the foundation for this rational design. Here, a synergistic approach was taken to correlate the ink formulation, the microstructure of catalyst layers, and the resulting MEA performance to establish such a property–structure–performance relationship. The solvent composition (n-PA/H 2 O mixtures) demonstrated a strong influence on the performance of the MEA fabricated with an 830-EW (Aquivion) ionomer, especially polarization losses of cell activation and mass transport. The performance differences were studied in terms of how the solvent composition affects the catalyst/ionomer interface, ionomer network, and pore structure of the resulting catalyst layers. The ionomer aggregates mainly covered the surface of catalyst aggregates acting as oxygen reduction reaction active sites, and the aggregate sizes of the ionomer and catalyst (revealed by ultrasmall angle X-ray scattering and cryo-transmission electron microscopy) were dictated by tuning the solvent composition, which in turn determined the catalyst/ionomer interface (available active sites). In n-PA/H 2 O mixtures with 50~90 wt % H 2 O, the catalyst agglomerates could be effectively broken up into small aggregates, leading to enhanced kinetic activities. The boiling point of the mixed solvents determined the pore structure of ultimate catalyst layers, as evidenced by mercury porosimetry and scanning electron microscopy. For mixed solvents with a higher boiling point, the catalyst–ionomer aggregates in the ink tend to agglomerate during the solvent evaporation process and finally form larger catalyst–ionomer aggregates in the ultimate catalyst layer, resulting in more secondary pores and thus lower mass transport resistance. Both the enlarged catalyst/ionomer interface and appropriate pore structure were achieved with the catalyst layer fabricated from an n-PA/H 2 O mixture with 90 wt % H 2 O, leading to the best MEA performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Quantifying Impacts of Biomass Pelletization on Fast Pyrolysis Using a Single-Particle Reactor, X-ray Computed Tomography, and Computational Modeling

The pore structure and density of lignocellulosic feedstocks dictate intraparticle transport phenomena and thereby play an important role in thermochemical conversion processes such as fast pyrolysis for biofuel and biochemical production. Variations in microstructure are inherent from different biomass species and can be introduced by preprocessing techniques such as cutting and pelletization. Morphological changes also occur during conversion and lead to vastly different pore structures and behavior during pyrolysis, which impact required conversion times and product distributions. The current work presents a comprehensive comparison of fast pyrolysis of neat and pelletized pine feedstocks, which includes single-particle experiments, modeling, and 3D imaging by X-ray computed tomography (XCT). The particle-scale model included anisotropic heat and mass transport in a shrinking particle with pyrolysis reactions based on the CRECK mechanism with boundary conditions informed by reactor-scale simulations of the single-particle reactor. The models were validated by measurements of the temperature and mass loss from single-particle pyrolysis experiments of neat and pelletized pine. Quantitative analysis of XCT geometries revealed that pyrolytic conversion yielded chars with increased porosity and permeability compared to the unpyrolyzed materials, along with decreased tortuosity and anisotropy. Pelletization of the pine feedstock resulted in a much denser, less permeable material, which converted slower and produced more residual char after pyrolysis compared to neat pine. The results from particle modeling revealed that accounting for the dynamic and anisotropic heat and mass transport caused by differences in pore structure is critical to achieving agreement with experimental results. Overall, this study highlights the dramatic differences in conversion behavior imparted by pelletization and the importance of capturing microstructural attributes in computational models to guide the design and optimization of pyrolysis processes for specific biomass feedstocks.

09 BIOMASS FUELS↗
DOE OSTI2021

Characterization of Nanoscale Pores in Tight Gas Sandstones Using Complex Techniques: A Case Study of a Linxing Tight Gas Sandstone Reservoir

Pore structures with rich nanopores and permeability in tight gas reservoirs are poorly understood up to date. Advanced techniques are needed to be employed to accurately characterize pore structures, especially tiny pores which include micron and nanopores. In this study, various experimental techniques such as scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) T 2 , nitrogen adsorption method, and NMR cryoporometry (NMRC) are combined to interrogate the complex pore systems of the tight gas reservoir in the Linxing formation, Ordos Basin, China. Results show that tight gas sandstones are primarily comprised of residual interparticle and clay-dominated pores. Clay and quartz are two dominate minerals while pyrite occupies a nontrivial amount as well. The permeability of tight gas sandstones is very low, exhibiting an extremely poor positive correlation with porosity. While pore types and relative pore contents are more influential factors on the permeability, accurate characterization of pore size distribution is critical for the permeability of tight gas sandstones. Therefore, complementary characterization methods are carried out, indicating that neither small pores with radii < 100 nm (around peak 1 in NMR T 2 distribution) nor large pores with radii > 5 μ m (around peak 3 in NMR T 2 distribution) control the permeability by analyzing the connectivity of the pores in various size ranges, but rather pores averaging approximately 350 ± X nm (around peak 2 in NMR T 2 distribution) have sufficient connectivity to host and transmit hydrocarbons. The pore size of tight gas sandstones is dominated by the clay-rich mineral assemblage. The study shows that the NMRC technique can be a very promising method, especially when referred to as a promising “roadmap” on how to interrogate tight formations such as the tight gas sands or even shale especially for the nanopore characterization.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Microstructural changes and mass transport in cement-based materials: A modeling approach

Highlights: • Concept to relate microstructural changes, mass transport, and chemical reactions in cement-based materials is presented. • Multi-physics modeling approach utilizing an extended version of the PNP equation and the geochemical code IPHREEQC. • Case studies indicate significant changes in mass transport properties due to alterations in the microstructure. • Microstructural changes depend on exposure and interactions between chemical reactions, pore structure, and mass transport. A generic modeling framework is presented to relate microstructural changes, i.e. changes in the pore volume distribution and phase assemblage, and mass transport in cement-based materials. The modeling framework accounts for mass transport and chemical equilibrium between ions in the pore solution and solid hydrates by means of an extended version of the Poisson-Nernst-Planck equation, in which the chemical equilibrium is solved by the external geochemical code IPHREEQC. Results of numerical studies concerning carbonation and leaching of a cement-based material indicate significant changes in mass transport properties due to chemical reactions leading to alterations in the microstructure. The resulting highly non-linear (both spatial and temporal) microstructural changes are thereby depending on the exposure and indicate that interactions between chemical reactions, pore structure changes, and mass transport have to be accounted for as a whole.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microstructure and water absorption of ancient concrete from Pompeii: An integrated synchrotron microtomography and neutron radiography characterization

There is renewed interest in using advanced techniques to characterize ancient Roman concrete due to its exceptional durability and low-carbon footprint. In the present work, samples were drilled from the “Hospitium” in Pompeii and were analyzed by synchrotron microtomography (μCT) and neutron radiography to study how the microstructure, including the presence of induced cracks, affects their water adsorption. The water distribution and absorptivity were quantified by neutron radiography. The 3D crack propagation, pore size distribution and orientation, tortuosity, and connectivity were analyzed from μCT results using advanced imaging methods. Porosity was also measured by mercury intrusion porosimetry (MIP) as a reference. Ductile fracture patterns were observed once cracks were introduced. Compared to Portland cement mortar/concrete, the Pompeii samples had relatively high porosity, low connectivity, and a similar coefficient of capillary penetration. In addition, permeability was predicted from models based on percolation theory and pore structure data to evaluate the fluid transport properties. Understanding the microstructure of ancient Pompeii concrete is important because it could inspire the development of modern concrete with high durability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Membrane synthesis via in-situ pore formation in silica gels through dynamic miscibility with soybean oil

The dynamic immiscibility between vegetable oil and organic silica precursors during sol-gel synthesis was used to tailor the microstructure of gels made with tetraethoxysilane (TEOS) or tetraethoxysilane+methyltrimethoxysilane (MTMS). Vegetable oil was investigated as an environmentally friendly and cheaper alternative to many other porogens. Oil concentrations of 9.09 v/v% and 33.33 v/v% were studied. For both TEOS and TEOS+MTMS gels, the miscibility of the oil and precursor decreases as the silica gel network forms, leading to oil-rich regions within the silica matrix. Gels containing MTMS maintained partial miscibility with the oil during gel formation due to the non-hydrolysable methyl groups on the MTMS. The pore structure of MTMS gels appeared more interconnected compared to the isolated pores observed in gels made with only TEOS. To create membranes with hierarchical pore structures, solvent exchanges were performed on gels or dried gels (i.e., xerogels) were calcined. The effect of the methyl group was also observed in the results of the time sweep rheology, as the addition of oil to the TEOS+MTMS gels caused an increase in the time to form the spanning gel. The trend was the opposite for oil additions to TEOS gels, which only contained polar groups. Xerogel membranes made with TEOS+MTMS had higher specific surface areas (SSAs) than those made with TEOS. For oil concentrations of 33.33 v/v%, xerogels made from TEOS+MTMS had an average SSA of 1068 + 113 m2 g-1, an order of magnitude higher than the average SSA of 103 + 6 m2 g-1 for xerogels made with TEOS.

sol-gel, dynamic immiscibility, oil-alkoxide inter↗
DOE OSTI2024

Selective ion transport through hydrated micropores in polymer membranes

Abstract Ion-conducting polymer membranes are essential in many separation processes and electrochemical devices, including electrodialysis 1 , redox flow batteries 2 , fuel cells 3 and electrolysers 4,5 . Controlling ion transport and selectivity in these membranes largely hinges on the manipulation of pore size. Although membrane pore structures can be designed in the dry state 6 , they are redefined upon hydration owing to swelling in electrolyte solutions. Strategies to control pore hydration and a deeper understanding of pore structure evolution are vital for accurate pore size tuning. Here we report polymer membranes containing pendant groups of varying hydrophobicity, strategically positioned near charged groups to regulate their hydration capacity and pore swelling. Modulation of the hydrated micropore size (less than two nanometres) enables direct control over water and ion transport across broad length scales, as quantified by spectroscopic and computational methods. Ion selectivity improves in hydration-restrained pores created by more hydrophobic pendant groups. These highly interconnected ion transport channels, with tuned pore gate sizes, show higher ionic conductivity and orders-of-magnitude lower permeation rates of redox-active species compared with conventional membranes, enabling stable cycling of energy-dense aqueous organic redox flow batteries. This pore size tailoring approach provides a promising avenue to membranes with precisely controlled ionic and molecular transport functions.

Science & Technology - Other Topics↗
DOE OSTI2021

In situ TEM observation of calcium silicate hydrate nanostructure at high temperatures

Fire poses a substantial threat to concrete structures because calcium silicate hydrate (C-S-H) is not thermally stable at high temperatures. Herein, in situ TEM at temperatures from 20 to 800 °C was conducted to study the thermal-induced structural changes in C-S-H. We captured C-S-H shrinks at an average rate of 0.02 μm{sup 2}/{sup o}C upon heating with three stages observed, including induction, constant, and rapid periods. Our observation revealed that an 800 nm pore could be healed during pore structure evolution owing to the reconstruction and deformation among C-S-H blocks. The Ca/Si ratio was dropped at higher temperatures because of the leakage of calcium ions from the C-S-H structure to form CaO precipitates. The temperature-driven phase transformation and degradation were also detected using electron diffraction that C-S-H was transformed into metastable calcium silicate minerals above 800 °C. This work provides insights into the nanoscale transformation of C-S-H at high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Improving Carbonate-Promoted C–H Carboxylation Using Mesoporous Carbon Supports

C–H carboxylation is an attractive way to utilize CO 2 for chemical production provided that it does not consume resource-intensive reagents. Alkali carbonates dispersed into the pores of mesoporous supports display strongly basic reactivity under CO 2 , allowing them to be used as base promoters for C–H carboxylation of (hetero)arenes in the absence of other reagents or catalysts. Mesoporous oxides are convenient support materials, but only a relatively small fraction of the dispersed carbonate (ca. 10-20%) is converted to carboxylate products when metal oxide supports are used. Here we compare mesoporous oxide and carbon supports and investigate the dependence of carbonate reactivity on pore structure. We show that using mesoporous carbons supports can increase the carbonate conversion by 2–4x when compared to oxide supports. This improved carbonate reactivity is maintained across a variety of mesoporous carbons with different pore structures (ordered vs. disordered) and pore diameters, indicating that the dispersed carbonate is intrinsically more reactive on the surface of a carbon material compared to an oxide surface. Reaction of the carboxylate products with dimethyl carbonate yields isolable methyl esters as the final product and regenerates the dispersed carbonate. We show that mesoporous carbon supports are robust to at least 5 cycles of successive C–H carboxylation and methylation with dimethyl carbonate. Furthermore, understanding how the support structure affects dispersed carbonate reactivity is valuable for advancing C–H carboxylation toward practical application and utilizing these materials in other CO 2 transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Important Role of Ion Flux Regulated by Separators in Lithium Metal Batteries

Abstract Polyolefin separators are the most common separators used in rechargeable lithium (Li)‐ion batteries. However, the influence of different polyolefin separators on the performance of Li metal batteries (LMBs) has not been well studied. By performing particle injection simulations on the reconstructed three‐dimensional pores of different polyethylene separators, it is revealed that the pore structure of the separator has a significant impact on the ion flux distribution, the Li deposition behavior, and consequently, the cycle life of LMBs. It is also discovered that the homogeneity factor of Li‐ion toward Li metal electrode is positively correlated to the longevity and reproducibility of LMBs. This work not only emphasizes the importance of the pore structure of polyolefin separators but also provides an economic and effective method to screen favorable separators for LMBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Clinkerless ultra-high strength concrete based on alkali-activated slag at high temperatures

This work investigates the degradation mechanisms of clinkerless alkali-activated slag based ultra-high strength concrete (AAS-UHSC) upon exposure to high temperatures up to 800 °C. The heat-induced mechanical, mineralogical, molecular, microstructural, and pore structure alterations of AAS-UHSC prepared with various activator types, water-to-powder ratios, and fiber incorporation are studied. The results demonstrate the beneficial roles of potassium incorporation on improving the thermal stability and integrity of AAS-UHSC, via suppressing deleterious crystallization and transformation of aluminosilicate phases at high temperature. In contrast to Portland cement clinker-based UHSC, no sign of explosive spalling is observed in AAS-UHSC, likely due to the presence of microcracks that enhance the pore network connectivity. The mechanical degradation of AAS-UHSC at high temperature below 600 °C is resulted from dehydration and decomposition of phases and consecutive thermal cracking, together with enlarged porosity and coarsened pore structure. As the temperature rising to 800 °C, crystallization and transformation of phases, as well as formation of porous microstructure, considerably aggravate the mechanical degradation of AAS-UHSC. In contrast to the thermal damage mitigation by polymeric fibers in conventional UHSC, the fiber incorporation has little positive impact on the thermal resistance of AAS-UHSC.

36 MATERIALS SCIENCE↗