Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Investigation of infra-red and nonequilibrium air radiation

This report describes progress on the first year of a research program on the infrared radiation of air plasmas conducted in the High Temperature Gasdynamics Laboratory at Stanford University. This program is intended to investigate the masking of infrared signatures by the air plasma formed behind the bow shock of high velocity missiles. To this date, the radiative emission of air plasmas in the infrared has been the object of few experimental investigations, and although several infrared systems are already modeled in radiation codes such as NEQAIR, measurements are required to validate numerical predictions and indicate whether all transitions of importance are accounted for. The present program is motivated by the fact that 9 excited states (A, B, C, D, B', F, H, and H') of NO radiate in the infrared, especially between 1 and 1.5 microns where at least 9 transitions involving can be observed. Because these IR transitions are relatively well separated from each other, excited NO states concentrations can be easily measured, thus providing essential information on excited-state chemistry for use in optical diagnostics or in electronic excitation model validation. Developing accurate collisional-radiative models for these excited NO states is of importance as the UV-VUV transitions of NO (beta, gamma, epsilon, beta prime, gamma prime) produce a major, if not dominant, fraction of the radiation emitted by air plasmas. During the first year of the program, research has focused on the spectral range 1.0 to 1.5 microns, as detailed in Section 2 of this report. The measurements, conducted in a 50 kW radio-frequency inductively coupled plasma torch operating on air at atmospheric pressure, extend previous shock tube investigations by Wray to a wider spectral range (1.0 to 1.5 microns vs 0.9 to 1.2 microns) and higher temperatures (7600 K in the plasma torch versus 6700 K in the shock-tube). These higher temperatures in the present experiment have made it possible to observe high-lying excited NO states that were previously undetectable. These measurements are currently being extended up to 5 microns, with particular attention paid to the rovibronic bands of ground state NO, molecular continua, CO transitions, and other systems of importance. Publications and presentations resulting from or related to this work are cited in Section 3, and Section 4 lists the personnel who contributed to this report.

Kruger, Charles H.↗

Initiation of ecton processes by interaction of a plasma with a microprotrusion on a metal surface

Evolution of rapid ({approx}10 ns) Ohmic overheating of a microprotrusion on a surface in contact with a plasma by emission current is studied taking into account the energy carried by plasma ions and electrons, as well as Ohmic heating, emissive source of energy release (Nottingham effect), and heat removal due to heat conduction. Plasma parameters were considered in the range of n = 10{sup 14}-10{sup 20} cm{sup -3} and T{sub e} = 0.1 eV-10 keV. The threshold value of energy transferred to the surface from the plasma is found to be 200 MW/cm{sup 2}; above this value, heating becomes explosive (namely, an increase in the temperature growth rate ({delta}{sup 2}T/{delta}t{sup 2} > 0) and in passing current ({delta}J/{delta}t > 0) is observed in the final stage at T {approx} 10{sup 4} K and j {approx} 10{sup 8} A/cm{sup 2}). In spite of the fact that Ohmic heating does not play any significant role for plasmas with a density lower than 10 18 cm{sup -3} because the current is limited by the space charge of electrons, rapid overheating of top of microprotrusion is observed much sooner (over a time period of {approx}1 ns) when the threshold is exceeded. In this case, intense ionization of vapor of the wall material leads to an increase in the plasma density at the surface, and the heating becomes of the Ohmic explosion type. Such conditions for the formation of a micrixplosion on the surface and of an ecton accompanying it can be created during the interaction of a plasma with the cathode, anode, or an insulated wall and may lead to the formation of cathode and anode spots, as well as unipolar arcs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Verification methods for drift–diffusion reaction models for plasma simulations

Abstract Compared to other computational physics areas such as codes for general computational fluid dynamics, the documentation of verification methods for plasma fluid codes remains under developed. Current analytical solutions for plasma are often highly limited in terms of testing highly coupled physics, due to the harsh assumptions needed to derive even simple plasma equations. This work highlights these limitations, suggesting the method of manufactured solutions (MMSs) as a potential option for future verification efforts. To demonstrate the flexibility of MMS in verifying these highly coupled systems, the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework was utilized. Thanks to the MOOSE framework’s robustness and modularity, as well as to its physics module capabilities and ecosystem applications (i.e. Zapdos and the chemical reaction network) developed for plasma physics modeling and simulation, this report lays the groundwork for a structured method of conducting plasma fluid code verification.

DeChant, Corey (ORCID:0000000293779732)↗

Design of a high energy density experiment to measure the suppression of hydrodynamic instability in an applied magnetic field

A transverse magnetic field can suppress the hydrodynamic instability growth of an unstable plasma interface. This effect, of interest to inertial confinement fusion and astrophysics, has mostly been studied via simulation. Here, we present the design of an experiment at the National Ignition Facility (NIF) to demonstrate this effect in a laboratory. Simulations indicate that the timescale for the diffusion of the magnetic field across the mixing region should be at least comparable to the timescale of the instability growth in order to have a measurable suppression effect. This motivates the use of lower density target materials than usual high energy density (HED) hydrodynamics experiments to permit faster hydrodynamics and higher plasma conductivities (through higher temperature), for a given laser drive and magnetic field. We discuss a target design for creating a Rayleigh–Taylor unstable HED plasma interface that uses 320 mg/cc iodine-doped carbon foam as the heavy material, 20 mg/cc carbon foam as the light material, and a 6 lm amplitude, a 120 lm wavelength ripple machined at the interface, which shows a measurable suppression effect with a nominal NIF drive and a 30 T magnetic field (the present facility limit). Here, models indicate lower density foams that may display even larger suppression effects, as the Hohlraum drive also radiatively preheats the foam to permit even higher temperatures and, hence, higher conductivities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the near-electrode processes in quasi-steady plasma accelerators with impenetrable electrodes

Near-electrode processes in a coaxial plasma accelerator with equipotential impenetrable electrodes are simulated using a two-dimensional (generally, time-dependent) two-fluid MHD model with allowance for the Hall effect and the plasma conductivity tensor. The simulations confirm the theoretically predicted mechanism of the so-called 'crisis of current' caused by the Hall effect. The simulation results are compared with available experimental data. The influence of both the method of plasma supply to the channel and an additional longitudinal magnetic field on the development of near-electrode instabilities preceding the crisis of current is studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of charging process and size distribution of dust grain on the electric conductivity of dusty plasma

The effects of dust size distribution and charging process of dust grains on the complex electric conductivity of dusty plasmas have been investigated in the present paper. Comparisons are made between real dusty plasma in which there are many different dust grain species and the mono-sized dusty plasma (MDP) in which there is only one kind of dust grain whose size is the average dust size. In some cases the complex electric conductivity of real dusty plasma is larger than that of MDP, while in other cases it is smaller than that of MDP, it depends on the dust size distribution function.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flux Compression Magnetic Nozzle

In pulsed fusion propulsion schemes in which the fusion energy creates a radially expanding plasma, a magnetic nozzle is required to redirect the radially diverging flow of the expanding fusion plasma into a rearward axial flow, thereby producing a forward axial impulse to the vehicle. In a highly electrically conducting plasma, the presence of a magnetic field B in the plasma creates a pressure B(exp 2)/2(mu) in the plasma, the magnetic pressure. A gradient in the magnetic pressure can be used to decelerate the plasma traveling in the direction of increasing magnetic field, or to accelerate a plasma from rest in the direction of decreasing magnetic pressure. In principle, ignoring dissipative processes, it is possible to design magnetic configurations to produce an 'elastic' deflection of a plasma beam. In particular, it is conceivable that, by an appropriate arrangement of a set of coils, a good approximation to a parabolic 'magnetic mirror' may be formed, such that a beam of charged particles emanating from the focal point of the parabolic mirror would be reflected by the mirror to travel axially away from the mirror. The degree to which this may be accomplished depends on the degree of control one has over the flux surface of the magnetic field, which changes as a result of its interaction with a moving plasma.

Thio, Y. C. Francis↗

Arc-driven rail gun research

The equations describing the performance of an inductively-driven rail gun are analyzed numerically. Friction between the projectile and rails is included through an empirical formulation. The equations are applied to the experiment of Rashleigh and Marshall to obtain an estimate of energy distribution in rail guns as a function of time. The effect of frictional heat dissipation on the bore of the gun is calculated. The mechanism of plasma and projectile acceleration in a dc rail gun is described from a microscopic point of view through the establishment of the Hall field. The plasma conductivity is shown to be a tensor indicating that there is a small component of current parallel to the direction of acceleration. The plasma characteristics are evaluated as a function of plasma mass through a simple fluid mechanical analysis of the plasma. By equating the energy dissipated in the plasma with the radiation heat loss, the properties of the plasma are determined.

Ray, P. K.↗

Characterisation of plasma in a rail gun

The mechanism of plasma and projectile acceleration in a DC rail gun is described from a microscopic point of view through the establishment of the Hall field. The plasma conductivity is shown to be a tensor, indicating that there is a small component of current parallel to the direction of acceleration. The plasma characteristics are evaluated in the experiment of Bauer et. al., as a function of plasma mass through a simple fluid mechanical analysis of the plasma. By equating the energy dissipatated in the plasma with the radiation heat loss, the properties of the plasma are determined.

Ray, P. K.↗

Investigation of Infra-red and Nonequilibrium Air Radiation

This report summarizes the results obtained during a research program on the infrared radiation of air plasmas conducted in the High Temperature Gasdynamics Laboratory at Stanford University. This program was intended to investigate the masking of infrared signatures by the air plasma formed behind the bow shock of high velocity missiles. Prior to this work, the radiative emission of air plasmas in the infrared had been the object of few experimental investigations, and although several infrared systems were already modeled in radiation codes such as NEQAIR, measurements were required to validate numerical predictions and indicate whether all transitions of importance were accounted for in the model. The program was further motivated by the fact that 9 excited states (A, B, C, D, B', F, H, and H') of NO radiate in the infrared, especially between 1 and 1.5 microns where at least 9 transitions involving can be observed. Because these IR transitions are relatively well separated from each other, excited NO states concentrations can be easily measured, thus providing essential information on excited-state chemistry for use in optical diagnostics or in electronic excitation model validation. Detailed comparisons between measured and simulated spectra are presented.

Kruger, Charles H.↗

Thermal conductivity calculation of complex (dusty) plasmas

The thermal conductivity of three-dimensional (3D) strongly coupled complex (dusty) plasmas has been calculated through the improved Evan-Gillan nonequilibrium molecular dynamics (NEMD) algorithm. The extensive NEMD simulations are performed to study the performance of the algorithm and compared the results determined for perturbed heat energy current to the results obtained by equilibrium molecular dynamics (EMD) simulations. The calculations show that the present algorithm gives accurate results with fast convergence and small size effects over a wide range of plasma coupling and screening parameters. The present simulation results are in agreement with part of others NEMD and EMD data in the literature with simulation values generally overpredicting the thermal conductivity by 3%-20%, depending on plasma parameters. It is shown that the homogenous perturbed method can be employed to estimate the thermal conductivity and to understand the fundamental behaviors in 3D complex Yukawa liquids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of linear and nonlinear conductivity of plasma-like systems on the basis of the Fokker-Planck equation

The problems of high linear conductivity in an electric field, as well as nonlinear conductivity, are considered for plasma-like systems. First, we recall several observations of nonlinear fast charge transport in dusty plasma, molecular chains, lattices, conducting polymers, and semiconductor layers. Exploring the role of noise we introduce the generalized Fokker-Planck equation. Second, one-dimensional models are considered on the basis of the Fokker-Planck equation with active and passive velocity-dependent friction including an external electrical field. On this basis, it is possible to find the linear and nonlinear conductivities for electrons and other charged particles in a homogeneous external field. It is shown that the velocity dependence of the friction coefficient can lead to an essential increase of the electron average velocity and the corresponding conductivity in comparison with the usual model of constant friction, which is described by the Drude-type conductivity. Applications including novel forms of controlled charge transfer and non-Ohmic conductance are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low sputtering, cross-field, gas switch and method of operation

A gas switch includes a gas-tight housing containing an ionizable gas, an anode disposed within the gas-tight housing, and a cathode disposed within the gas-tight housing, where the cathode includes a conduction surface. The gas switch also includes a control grid positioned between the anode and the cathode, where the control grid is arranged to receive a bias voltage to establish a conducting plasma between the anode and the cathode. In addition, the gas switch includes a plurality of magnets selectively arranged to generate a magnetic field proximate the conduction surface that reduces the kinetic energy of charged particles striking the conduction surface and raises the conduction current density at the cathode surface to technically useful levels.

42 ENGINEERING↗

Coulomb log for conductivity of dense plasmas

The Coulomb log (log Λ) approximation is widely used to approximate electron transport coefficients in dense plasmas. It is a classical approximation to the momentum transport cross section. Here, the accuracy of this approximation for electrical conductivity in dense plasmas is assessed by comparing to fully quantum mechanical calculations for realistic scattering potentials. It is found that the classical approximation is accurate to ±10% when log Λ > 3, irrespective of the plasma species. The thermodynamic regime (density and temperature) for which log Λ > 3 corresponds to does, however, strongly depend on the material. For increasing Z, log Λ is greater than 3 for increasingly high temperatures and lower densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of plasma generated by hypervelocity impact

The characteristics of plasma generated by hypervelocity impact were studied through both theoretical analysis and numerical simulation. Based on thermodynamics and statistical physics, a thermal ionization model was proposed to explore the relationships of ionization degree and plasma conductivity to temperature with consideration of the velocity distribution law in the thermodynamic equilibrium state. In order to derive the temperature, internal energy, and density of the plasma generated by the impact for the above relationships, a 3-D model for the impact of an aluminum spherical projectile on an aluminum target was established and five cases with different impact angles were numerically simulated. Then, the temperature calculated from the internal energy and the Thomas Fermi (TF) model, the internal energy and the density of the plasma were put into the function of the ionization degree to study the characteristics of plasma. Finally, based on the experimental data, a good agreement was obtained between the theoretical predictions and the experimental results, and the feasibility of this theoretical model was verified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge-exchange plasma generated by an ion thruster

The use of high voltage solar arrays greatly reduces or eliminates power processing requirements in space electric propulsion systems. This use also requires substantial areas of solar array to be at high positive potential relative to space and most of the spacecraft. The charge exchange plasma conducts electrons from the ion beam to such positive surfaces, and thereby electrically load the high voltage solar array. To evaluate this problem, the charge-exchange plasma generated by an ion beam was investigated experimentally. Based upon the experimental data, a simple model was derived for the charge-exchange plasma. This model is conservative in the sense that both the electron/ion density and the electron current density should be equal to, or less than, the preducted value for all directions in the hemisphere upstream of the ion beam direction. Increasing the distance between a positive potential surface (such as a high voltage solar array) and the thruster is the simplest way to control interactions. Both densities and currents vary as the inverse square of this distance.

Kaufman, H. R.↗

The structure of bow shocks formed by the interaction of pulsed-power driven magnetised plasma flows with conducting obstacles

We present an experimental study of the development and structure of bow shocks produced by the interaction of a magnetised, collisional, super-Alfvénic plasma flow with conducting cylindrical obstacles. The plasma flow with an embedded, frozen-in magnetic field (Re M ~ 20) is produced by the current-driven ablation of fine aluminium wires in an inverse, exploding wire array z-pinch. We show that the orientation of the embedded field with respect to the obstacles has a dramatic effect on the bow shock structure. When the field is aligned with the obstacle, a sharp bow shock is formed with a global structure that is determined simply by the fast magneto-sonic Mach number. When the field is orthogonal to the obstacle, magnetic draping occurs. This leads to the growth of a magnetic precursor and the subsequent development of a magnetised bow shock that is mediated by two-fluid effects, with an opening angle and a stand-off distance, that are both many times larger than in the parallel geometry. By changing the field orientation, we change the fluid regime and physical mechanisms that are responsible for the development of the bow shocks. MHD simulations show good agreement with the structure of well-developed bow shocks. However, collisionless, two-fluid effects will need to be included within models to accurately reproduce the development of the shock with an orthogonal B-field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increasing Black Hole Feedback-induced Quenching with Anisotropic Thermal Conduction

Feedback from central supermassive black holes is often invoked to explain the low star formation rates (SFRs) in the massive galaxies at the centers of galaxy clusters. However, the detailed physics of the coupling of the injected feedback energy with the intracluster medium (ICM) is still unclear. Using high-resolution magnetohydrodynamic cosmological simulations of galaxy cluster formation, we investigate the role of anisotropic thermal conduction in shaping the thermodynamic structure of clusters, and in particular, in modifying the impact of black hole feedback. Stratified anisotropically conducting plasmas are formally always unstable, and thus more prone to mixing, an expectation borne out by our results. The increased mixing efficiently isotropizes the injected feedback energy, which in turn significantly improves the coupling between the feedback energy and the ICM. This facilitates an earlier disruption of the cool-core, reduces the SFR by more than an order of magnitude, and results in earlier quenching despite an overall lower amount of feedback energy injected into the cluster core. With conduction, the metallicity gradients and dispersions are lowered, aligning them better with observational constraints. These results highlight the important role of thermal conduction in establishing and maintaining the quiescence of massive galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗