Non-Traditional Chemistry Research: From Organic Electronics to Cooperative Threat Reduction ? with a Stop in Explosives on the Way.
Abstract not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided.
This meeting focuses on the latest progress and challenges regarding organic electronics devices, artificial light-harvesting systems, and inorganic/organic hybrid nanoscale systems and especially on the synergy between these fields.
A representative mesoporous metal–organic-framework (MOF) material, NU-1000, has been rendered electronically conductive via a robust inorganic approach that permits retention of MOF crystallinity and porosity. The approach is based on condensed-phase grafting of molecular tin species onto the MOF nodes via irreversible reaction with hydroxyl and aqua ligands presented at the node surface, a self-limiting process termed solvothermal installation (of metal ions) in MOFs (SIM, a solution-phase analog of atomic layer deposition in MOFs). Treatment of the modified MOF with aerated steam at 120 °C converts the grafted tin molecules to tetratin(IV)oxy clusters, with the clusters being sited between insulating pairs of zirconia-like nodes (the zirconium component being key to endowing the parent material with requisite chemical and thermal stability). By introducing new O–H presenting ligands on the modified-MOF node, the high-temperature steam step additionally serves to reset the material to reactive form, thus enabling a second self-limiting tin-grafting step to be run (and after further steam treatment, enabling a third). Difference-envelop-density (DED) analyses of synchrotron-derived X-ray scattering data, with and without installed tin species, show that the clusters formed after one cycle are spatially isolated, but that repetitive SIM cycling adds metal and oxygen ions in a way that enshrouds nodes, links clusters, and yields continuous one-dimensional strands of oxy-tin(IV), oriented exclusively along the c axis of the MOF. Two-probe conductivity measurements show that the parent MOF and the version containing isolated oxy-tin(IV) clusters are electrically insulating, but that the versions featuring continuous strands show an electrical conductivity of 1.8 × 10–7 S/cm after three Sn-SIM cycles. When combined with interdigitated microelectrodes, the solvent-free and conductive-glass-modified material (three Sn-SIM cycles) displays a substantial and persistent increase in electrical conductivity during exposure to 5% H2, indicating a role for dissociated H2 as an electronic dopant. The increase can be repetitively reversed by alternating H2 with air, illustrating the ability of the conductive MOF to function as a resistive sensor for H2 and suggesting further potential applications that may capitalize on the combination of high volumetric surface area, high mesoporosity, high chemical and thermal stability, and significant electrical conductivity.
We present our understanding of the electronic energy landscape and dynamics of charge separation at organic donor/acceptor interfaces. The organic/organic interface serves as a valuable point of reference and plays an important role in emerging electronic and optoelectronic applications, particularly organic photovoltaics (OPVs). The key issue on electronic structure at organic donor/acceptor interfaces is the difference in the lowest unoccupied molecular orbitals or that in the highest occupied molecular orbitals. This difference represents an energy gain needed to overcome the exciton binding energy in a charge-separation process in OPV. A sufficiently large energy gain favors the formation of charge transfer (CT) states that are energetically close to the charge-separation state. At an organic donor/acceptor interface in an OPV device, these high-energy CT states, also called hot CT excitons, are necessary intermediates in a successful charge-separation process.
Significance Organic electronics, particularly polymers, can be synthesized and processed with low temperatures and, more importantly, have the potential to be environmentally benign candidates for electronic applications. However, there has been no report of totally decomposable polymer semiconductors. Their availability will enable low-cost and fully disintegrable transient electronics. We have developed an innovative concept based on imine chemistry that allows totally disintegrable and biocompatible semiconducting polymers. Using an ultrathin biodegradable substrate, we successfully fabricated polymer transistors and logic circuits that show high performance and are ultralightweight, but they can be fully disintegrable. Our work significantly advances organic materials to enable environmentally friendly and biointegrated electronic applications.
A triazine- and pyridinium-containing water-soluble material of 1,1′,1″-(4,4′,4″-(1,3,5-triazine-2,4,6-triyl)tris(benzene-4,1-diyl)) tris(methylene)tripyridinium bromide (TzPyBr) was developed as an organic electron-selective layer in solution-processed inverted organic solar cells due to its strong anti-erosion capacity against non-polar organic solvents commonly used for the active layer. Ohmic-like contact with the adjacent active materials like fullerene derivatives is speculated to be formed, as confirmed by the work-function measurements with scanning Kelvin probe and ultraviolet photoelectron spectroscopy techniques. Besides, considering the deep highest occupied molecular orbital energy level of TzPyBr, excellent hole-blocking property of the electron-selective layer is also anticipated. The inverted organic photovoltaic devices based on the TzPyBr/ITO (indium tin oxide) bilayer cathode exhibit dramatically enhanced performance compared to the control devices with bare ITO as the cathode and even higher efficiency than the conventional type devices with ITO and Al as the electrodes.
In one aspect, solid-state organic intermediate-band photovoltaic devices are provided. A solid-state organic intermediate-band photovoltaic device, in some embodiments, comprises an organic electron donor and an organic electron acceptor, wherein the organic electron donor comprises a singlet energy level separated from a triplet energy level by an energy gap. The device also comprises a triplet sensitizer comprising singlet and triplet energy levels falling within the singlet-triplet energy gap of the electron donor.
In one aspect, solid-state organic intermediate-band photovoltaic devices are provided. A solid-state organic intermediate-band photovoltaic device, in some embodiments, comprises an organic electron donor and an organic electron acceptor, wherein the organic electron donor comprises a singlet energy level separated from a triplet energy level by an energy gap. The device also comprises a triplet sensitizer comprising singlet and triplet energy levels falling within the singlet-triplet energy gap of the electron donor.
Not Available
Hybrid materials with nanoscale structure that incorporates inorganic and organic phases with electronic properties offer potential in an extensive functional space that includes photovoltaics, light emission, and sensing. This work describes the nanoscale structure of model hybrid materials with phases of silica and electronically active bola-amphiphile assemblies containing either oligo(p-phenylene vinylene) or oligo(thiophene) segments. The hybrid materials studied here were synthesized by evaporation-induced self-assembly and characterized by X-ray scattering techniques. Grazing-incidence X-ray scattering studies of these materials revealed the formation of two-dimensional hexagonally packed cylindrical micelles of the organic molecules with diameters between 3.1 and 3.6 nm and cylindrical axes parallel to the surface. During the self-assembly process at low pH, the cylindrical aggregates of conjugated molecules become surrounded by silica giving rise to a hybrid structure with long-range order. Specular X-ray reflectivity confirmed the long-range periodicity of the hybrid films within a specific range of molar ratios of tetraethyl orthosilicate to cationic amphiphile. We did not observe any long-range ordering in fully organic analogues unless quaternary ammonium groups were replaced by tertiary amines. These observations suggest that charge screening in these biscationic conjugated molecules by the mineral phase is a key factor in the evolution of long range order in the self-assembling hybrids.
We report on the electronic structure of freshly evaporated and air-exposed Molybdenum tri-oxide (MoO 3 ) and the energy-level alignment between this compound and a hole-transport material [e.g., N,N'-diphenyl-N,N'-bis (1-naphthyl)-1,1'-biphenyl-4,4'-diamine (α-NPD)]. Ultraviolet and inverse photoelectron spectroscopy show that freshly evaporated MoO 3 exhibits deep-lying electronic states with an electron affinity (EA) of 6.7 eV and ionization energy (IE) of 9.7 eV. Air exposure reduces EA and IE by ~1 eV, to 5.5 and 8.6 eV, respectively, but does not affect the hole-injection efficiency, which is confirmed by device studies. Thus, MoO 3 can be applied in low-vacuum environment, which is particularly important for low-cost manufacturing processes. Our findings of the energy-level alignment between MoO 3 and α-NPD also leads to a revised interpretation of the charge-injection mechanism, whereby the hole-injection corresponds to an electron extraction from the organic highest-occupied molecular orbital (HOMO) level via the MoO 3 conduction band.
Electron transport is of fundamental importance, and has application in a variety of fields. Different scattering mechanisms affect electron transport in solids. It is important to comprehensively understand these mechanisms and their scattering cross-sections to predict electron transport properties. Whereas electron transport is well understood for high kinetic energy (KE) electrons, there are inconsistencies in the low KE regime. In this study, velocity map imaging soft X-ray photoelectron spectroscopy is applied to unsupported organic nanoparticles to extract experimental values of inelastic and elastic mean free paths. The obtained data is used to calculate corresponding scattering cross-sections. The data demonstrates a decrease of the Inelastic Mean Free Path and increase of the Elastic Mean Free Path with increasing electron KE between 10-50 eV.
Abstract Organic mixed ionic–electronic conductors (OMIECs) have varied performance requirements across a diverse application space. Chemically doping the OMIEC can be a simple, low‐cost approach for adapting performance metrics. However, complex challenges, such as identifying new dopant materials and elucidating design rules, inhibit its realization. Here, these challenges are approached by introducing a new n‐dopant, tetrabutylammonium hydroxide (TBA‐OH), and identifying a new design consideration underpinning its success. TBA‐OH behaves as both a chemical n‐dopant and morphology additive in donor acceptor co‐polymer naphthodithiophene diimide‐based polymer, which serves as an electron transporting material in organic electrochemical transistors (OECTs). The combined effects enhance OECT transconductance, charge carrier mobility, and volumetric capacitance, representative of the key metrics underpinning all OMIEC applications. Additionally, when the TBA + counterion adopts an “edge‐on” location relative to the polymer backbone, Coulombic interaction between the counterion and polaron is reduced, and polaron delocalization increases. This is the first time such mechanisms are identified in doped‐OECTs and doped‐OMIECs. The work herein therefore takes the first steps toward developing the design guidelines needed to realize chemical doping as a generic strategy for tailoring performance metrics in OECTs and OMIECs.
Significance Transport of objects in man-made systems typically relies on energy gradients that span the distance over which the particles must travel. Biological systems do not have these large-scale gradients available and instead transport particles with repeated local interactions between asymmetric structures, powered by nondirectional sources of energy like heat or chemical reactions. This process is called “ratcheting.” Here, we exploit the ratcheting mechanism to transport charge-carrying particles, electrons, through an amorphous organic film in which local structural inhomogeneities disrupt the gradients needed for typical electrical conduction to occur efficiently. This work explores basic mechanisms by which energy that is normally wasted in an electronic or photoelectrical device could be harnessed to do electrical work.
Two-electron three-center bonding interactions in organic ions like methonium (CH{sub 5}{sup +}), ethonium (C{sub 2}H{sub 7}{sup +}), and protonated alkanes n−C{sub 4}H{sub 11}{sup +} isomers (butonium cations) are described and characterized within the theoretical framework of the topological analysis of the electron density decomposition into its effectively paired and unpaired contributions. These interactions manifest in some of this type of systems as a concentration of unpaired electron cloud around the bond paths, in contrast to the well known paradigmatic boron hydrids in which it is not only concentrated close to the atomic nucleus and the bond paths but out of them and over the region defined by the involved atoms as a whole. This result permits to propose an attempt of classification for these interactions based in such manifestations. In the first type, it is called as interactions through bonds and in the second type as interactions through space type.
Multiphase vapor-deposited glasses are an important class of materials for organic electronics, particularly organic photovoltaics and thermoelectrics. These blends are frequently regarded as molecular alloys and there have been few studies of their structure at nanometer scales. Here, in this work, we show that a codeposited system of TPD (N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine) and DO37 (disperse orange 37), two small molecule glass-formers, separates into amorphous, compositionally distinct phases with a domain size and spacing ca. 10s of nanometers that depends on substrate temperature during deposition. Domains rich in one of the two components become larger and more pure at higher deposition temperatures. We use resonant soft X-ray scattering (RSoXS) complemented with atomic force microscopy (AFM) and photoinduced force microscopy to measure the phase separation, topography, and purity of the deposited films. A forward-simulation approach to RSoXS analysis, the National Institute of Standards and Technology RSoXS Simulation Suite (NIST RSoXS simulation suite), is used with models developed from AFM images to evaluate the energy dependence of scattering across multiple length scales and interpret the RSoXS with respect to structure within the films. We find that the RSoXS is sensitive to a length scale of phase separation buried within the film that is consistent with the surface composition profile, and correlates to the topography to an extent that depends on substrate temperature. We demonstrate that vacuum scattering, which is often ignored in RSoXS analysis, contributes significantly to the features and energy dependence of the RSoXS pattern, and then illustrate how to properly account for vacuum scattering to analyze films with significant roughness. We then use this analysis framework to understand structure development mechanisms that occur during vapor deposition of a TPD-DO37 codeposited glass with results that outline paths to tune morphology in multicomponent materials.
Nanoglobules are a form of organic matter found in interplanetary dust particles and primitive meteorites and are commonly associated with {sup 15}N and D isotopic anomalies that are suggestive of interstellar processes. We report the discovery of two isotopically-anomalous organic globules from the Stardust collection of particles from Comet 81P/Wild 2 and compare them with nanoglobules from the Murchison CM2 meteorite. One globule from Stardust Cometary Track 80 contains highly aromatic organic matter and a large {sup 15}N anomaly ({delta}{sup 15}N = 1120{per_thousand}). Associated, non-globular, organic matter from this track is less enriched in {sup 15}N and contains a mixture of aromatic and oxidized carbon similar to bulk insoluble organic material (IOM) from primitive meteorites. The second globule, from Cometary Track 2, contains non-aromatic organic matter with abundant nitrile ({single_bond}C{triple_bond}N) and carboxyl ({single_bond}COOH) functional groups. It is significantly enriched in D ({delta}D = 1000{per_thousand}) but has a terrestrial {sup 15}N/{sup 14}N ratio. Experiments indicate that similar D enrichments, unaccompanied by {sup 15}N fractionation, can be reproduced in the laboratory by electron irradiation of epoxy or cyanoacrylate. Thus, a terrestrial origin for this globule cannot be ruled out, and, conversely, exposure to high-energy electron irradiation in space may be an important factor in producing D anomalies in organic materials. For comparison, we report two Murchison globules: one with a large {sup 15}N enrichment and highly aromatic chemistry analogous to the Track 80 globule and the other only moderately enriched in {sup 15}N with IOM-like chemistry. The observation of organic globules in Comet 81P/Wild 2 indicates that comets likely sampled the same reservoirs of organic matter as did the chondrite parent bodies. The observed isotopic anomalies in the globules are most likely preserved signatures of low temperature (<10 K) chemistry in the interstellar medium or perhaps the outer regions of the solar nebula. In other extraterrestrial samples, D isotopic anomalies, but not those of {sup 15}N, may be explained in part by exposure to ionizing electron radiation.