Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORGANIC ACIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Contact Freezing of Water Droplets by Crystalline Organic Acids

The ability of water to freeze into ice crystals in mixed-phase clouds affects physical properties, including particle size, precipitation rates, and radiative properties. The presence of an insoluble particle at the surface of water droplets can promote ice nucleation at temperatures higher than that of pure water, even in the absence of a collision. However, contact freezing remains an underexplored mode of ice nucleation. Here, we present a study of atmospherically relevant organic acids and their role as effective ice-nucleating particles (INP) in contact mode using a Raman-microscope-equipped environmental chamber. We determined contact freezing temperatures induced by solid crystals of docosanol, adipic acid, cis-pinonic acid, fumaric acid, 4-hydroxybenzoic acid, palmitic acid, phthalic acid, sebacic acid, stearic acid, terephthalic acid, and vanillic acid. All solids except fumaric acid promoted contact freezing of water droplets at significantly higher temperatures than pure water in the chamber (−15.0 to −18.5 °C vs −21.3 °C). Physical and chemical properties were identified which correlate with greater effectiveness of INPs in the contact mode, including crystal lattice mismatch with ice, carbon number, and insolubility in water. In conclusion, we suggest that the presence of these organic solids in atmospheric aerosols may promote atmospheric ice nucleation at warm temperatures.

Clouds↗

Growth and inactivation of Listeria monocytogenes in sterile extracts of fruits and vegetables: Impact of the intrinsic factors pH, sugar and organic acid content

Intrinsic characteristics of fresh produce, such as pH, water activity, acid content and nutrient availability are critical factors in determining the survival and growth of Listeria monocytogenes (Lm). In this study, sterile fresh produce juice was used to analyze Lm growth potential among 14 different commodities and to identify physicochemical characteristics in those juices that affect Lm growth. Significant growth of Lm was observed in juices with pH ≥5.6 and low acidity (0.04–0.07 % titratable acidity (TA)) (cantaloupe, carrot, celery, green pepper, parsley, and romaine lettuce), slight reduction of Lm was observed in juices with pH 4.1 (tomato) and pH 3.9 (mango), and no Lm counts were recovered from juices with pH ≤3.8 and high acidity (0.28–1.17 % TA) (apple, blueberry, grape, peach, and pineapple). Although these acidic fruit juices possessed a high sugar content, the pH and acidity of produce juice seemed to be the primary determinants for Lm growth. The neutralization of acidic juices (i.e., Fuji and Gala apple, blueberry, grape, mango, pineapple, peach, and tomato) enabled Lm growth at 37 °C in all juices except for Gala apple and peach. Strong decline in Lm populations in Gala apple, grape and peach juices might be linked to sensitivity to organic acids, such as malic acid. As a result, Lm populations significantly decreased in pH-neutral (7.6) cauliflower juice, suggesting that potential antilisterial substances may play a role in Lm decline in cauliflower juice.

60 APPLIED LIFE SCIENCES↗

Carbon and Hydrogen Isotope Measurements of Alcohols and Organic Acids by Online Pyroprobe-GC-IRMS

The detection of methane in the atmosphere of Mars, combined with evidence showing widespread water-rock interaction during martian history, suggests that the production of methane on Mars may be the result of mineral surface-catalyzed CO2 and or CO reduction during Fisher-Tropsch Type (FTT) reactions. A better understanding of these reaction pathways and corresponding C and H isotope fractionations is critical to deciphering the synthesis of organic compounds produced under abiotic hydrothermal conditions. Described here is a technique for the extraction and analysis of both C and H isotopes from alcohols (C1-C4) and organic acids (C1-C6). This work is meant to provide a "proof of concept" for making meaningful isotope measurements on complex mixtures of solid-phase hydrocarbons and other intermediary products produced during high-temperature and high-pressure synthesis on mineral-catalyzed surfaces. These analyses are conducted entirely "on-line" utilizing a CDS model 5000 Pyroprobe connected to a Thermo Trace GC Ultra that is interfaced with a Thermo MAT 253 isotope ratio mass spectrometer operating in continuous flow mode. Also, this technique is designed to carry a split of the GC-separated product to a DSQ II quadrupole mass spectrometer as a means of making semi-quantitative compositional measurements. Therefore, both chemical and isotopic measurements can be carried out on the same sample.

Socki, Richard A.↗

Optimization of a Lithium Ion Battery Bioleaching Process Utilizing Organic Acids Produced by Gluconobacter oxydans

Growing our global economic and environmental focus relies, in part, on our development of a sustainable system to recycle valuable metals. This endeavor to recycle these elements falls within the scope of Idaho National Laboratories (INL) mission to pursue new sustainable energy systems that are competitive. To succeed in this endeavor in not only a low-cost but environmentally safe practice, Gluconobacter oxydans was utilized for its ability to produce a bio-lixiviant known for its critical material leaching abilities. G. oxydans is a rod-shaped, gram negative, acidophilic, and obligately aerobic organism. Unlike many other aerobic organisms, it does not completely oxidize its carbon sources to water and carbon dioxide. Instead it incompletely oxidizes its substrates to aldehydes, ketones and organic acids. Because of this metabolic pathway, it was utilized in a batch reactor setting to produce sufficient amounts of a low-pH bio-lixiviant so that leaching processes could be performed on lithium ion battery cathode powders. Some of these processes included adding different molar ratios of a redox agent to the produced bio-lixiviant, alternating concentrations of lithium ion battery cathode powders, varying leaching time, and changing the temperature each leach was performed at. From this, a biohydrometallurgy process was successfully created for the leaching of cobalt from lithium ion cathode powders This project provided a multitude of laboratory and research experiences that resulted in ample opportunity for professional and personal growth. In addition to this, the INL experience fostered the development of many personal skills and business skills to assist in future career opportunities.

25 ENERGY STORAGE↗

Insight into the Ligand-Mediated Synthesis of Colloidal CsPbBr 3 Perovskite Nanocrystals: The Role of Organic Acid, Base, and Cesium Precursors

While convenient solution-based procedures have been realized for the synthesis of colloidal perovskite nanocrystals, the impact of surfactant ligands on the shape, size, and surface properties still remains poorly understood, which calls for a more detailed structure-morphology study. Here in this paper we have systematically varied the hydrocarbon chain composition of carboxylic acids and amines to investigate the surface chemistry and the independent impact of acid and amine on the size and shape of perovskite nanocrystals. Solution phase studies on purified nanocrystal samples by (1)H NMR and IR spectroscopies have confirmed the presence of both carboxylate and alkylammonium ligands on surfaces, with the alkylammonium ligand being much more mobile and susceptible to detachment from the nanocrystal surfaces during polar solvent washes. Moreover, the chain length variation of carboxylic acids and amines, ranging from 18 carbons down to two carbons, has shown independent correlation to the size and shape of nanocrystals in addition to the temperature effect. We have additionally demonstrated that employing a more soluble cesium acetate precursor in place of the universally used Cs 2 CO 3 results in enhanced processability without sacrificing optical properties, thus offering a more versatile recipe for perovskite nanocrystal synthesis that allows the use of organic acids and amines bearing chains shorter than eight carbon atoms. Overall our studies have shed light on the influence of ligand chemistry on crystal growth and stabilization of the nanocrystals, which opens the door to functionalizable perovskite nanocrsytals through surface ligand manipulation.

colloidal nanocrystal↗

Integrated Ion-Exchange Membrane Resin Wafer Assemblies for Aromatic Organic Acid Separations Using Electrodeionization

Aromatic acids, such as p-coumaric acid, are valuable chemical intermediates that are used in the specialty chemical industries because they are precursors to phenylpropanoid compounds. The separation of p-coumaric acid from fermentation broths is a critical step in the biochemical production process and more broadly the circular carbon economy. Electrodeionization (EDI) has been applied toward separations of low-carbon chain acids, but purifying p-coumaric acid has been challenging due to fouling and irreversible binding with ion-exchange membranes and resins. Here, we report a new membrane wafer assembly (MWA) consisting of laminated ion exchange membranes to porous ionomer-binder resin wafers for EDI. The MWAs in an EDI stack showed a 7-fold increase in p-coumaric acid capture while also using 70% less specific energy consumption when benchmarked against state-of-the-art resin wafer EDI modules. The more efficient p-coumaric acid recovery was ascribed to (i) the 38% reduction in interfacial transport resistance between the membrane and resin wafer and (ii) using imidazolium anion exchange membranes and ionomer binders in the MWA. MD simulations revealed enhanced transport rates for p-coumarate in imidazolium ionomers through π–π interactions. As a result, adopting the new MWA significantly reduced the amount of ion-exchange membranes in EDI and may lead to drastic capital cost savings.

42 ENGINEERING↗

Hygroscopic Properties of Internally Mixed Particles Composed of NaCl and Water-Soluble Organic Acids

Atmospheric aging of naturally emitted marine aerosol often leads to formation of internally mixed particles composed of sea salts and water soluble organic compounds of anthropogenic origin. Mixing of sea salt and organic components has profound effects on the evolving chemical composition and hygroscopic properties of the resulted particles, which are poorly understood. Here, we have studied chemical composition and hygroscopic properties of laboratory generated NaCl particles mixed with malonic acid (MA) and glutaric acid (GA) at different molar ratios using micro-FTIR spectroscopy and X-ray elemental microanalysis.Hygroscopic properties of inte rnally mixed NaCl and organic acid particles were distinctly different from pure components and varied significantly with the type and amount of organic compound present. Experimental results were in a good agreement with the AIM modeling calculations of gas/liquid/solid partitioning in studied systems. X-ray elemental microanalysis of particles showed that Cl/Na ratio decreased with increasing organic acid component in the particles with MA yielding lower ratios relative to GA. We attribute the depletion of chloride to the formation of Na-malonate and Na-glutarate salts resulted by HCl evaporation from dehydrating particles.

chloride depletion↗

Analysis of plant ABCB organic acid transporters (Final Report)

Functional Analysis and Genetic Manipulation of Plant ABCB Organic Ion Transporters- The project explores how ABC transporters export hydrophobic aromatics, identifies structural characteristics that regulate lateral positioning, and uses nanodisc technology to create platforms for structural studies of ABC plasma membrane transport proteins.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluate the role of organic acids in the protection of ligands from radiolytic degradation

In the Advanced TALSPEAK process, the bis(2-ethylhexyl)phosphoric acid (HDEHP) extractant used in the traditional TALSPEAK process is replaced by the extractant 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]). In addition, the aqueous phase complexant and buffer used in traditional TALSPEAK is replaced with the combination of N-(2-hydroxyethyl)ethylenediamine-N,N’,N’-triacetic acid (HEDTA) and citric acid. In order to evaluate the possible impacts of gamma radiolysis upon the efficacy of the Advanced TALSPEAK flowsheet, aqueous and organic phases corresponding to the extraction section of the proposed flowsheet were irradiated in the INL test loop under an ambient atmosphere. The results of these studies conducted at INL, led INL researchers to conclude that the scarcity of values of rate constants for the reaction of hydroxyl radical with the components of the Advanced TALSPEAK process chemistry was severely limiting the interpretation of the results of radiolysis studies performed at the INL. In this work, the rate of reaction of hydroxyl radical with citric acid at several pH values was measured using a competitive pulse radiolysis technique. This report describes those results and is written in completion of milestone M3FT-16IN030102028, the goal of which was to evaluate the role of organic acids in the protection of ligands from radiolytic degradation. The results reported here demonstrate the importance of obtaining hydroxyl radical reaction rate data for the conditions that closely resemble actual solution conditions expected to be used in an actual solvent extraction process. This report describes those results and is written in completion of milestone M3FT-16IN030102028, the goal of which was to evaluate the role of organic acids in the protection of ligands from radiolytic degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organic acid-tolerant microorganisms and uses thereof for producing organic acids

Organic acid-tolerant microorganisms and methods of using same. The organic acid-tolerant microorganisms comprise modifications that reduce or ablate AcsA activity or AcsA homolog activity. The modifications increase tolerance of the microorganisms to such organic acids as 3-hydroxypropionic acid (3HP), acrylic acid, and propionic acid. Further modifications to the microorganisms such as increasing expression of malonyl-CoA reductase and/or acetyl-CoA carboxylase provide or increase the ability of the microorganisms to produce 3HP. Methods of generating an organic acid with the modified microorganisms are provided. Methods of using acsA or homologs thereof as counter-selectable markers include replacing acsA or homologs thereof in cells with genes of interest and selecting for the cells comprising the genes of interest with amounts of organic acids effective to inhibit growth of cells harboring acsA or the homologs.

60 APPLIED LIFE SCIENCES↗

Hydrolysis of lignocellulose by anaerobic fungi produces free sugars and organic acids for two–stage fine chemical production with Kluyveromyces marxianus

Development of the bioeconomy is driven by our ability to access the energy-rich carbon trapped in recalcitrant plant materials. Current strategies to release this carbon rely on expensive enzyme cocktails and physicochemical pretreatment, producing inhibitory compounds that hinder subsequent microbial bioproduction. Anaerobic fungi are an appealing solution as they hydrolyze crude, untreated biomass at ambient conditions into sugars that can be converted into value-added products by partner organisms. However, some carbon is lost to anaerobic fungal fermentation products. To improve efficiency and recapture this lost carbon, we built a two-stage bioprocessing system pairing the anaerobic fungus Piromyces indianae with the yeast Kluyveromyces marxianus, which grows on a wide range of sugars and fermentation products. In doing so we produce fine and commodity chemicals directly from untreated lignocellulose. P. indianae efficiently hydrolyzed substrates such as corn stover and poplar to generate sugars, fermentation acids, and ethanol, which K. marxianus consumed while producing 2.4 g/L ethyl acetate. An engineered strain of K. marxianus was also able to produce 550 mg/L 2-phenylethanol and 150 mg/L isoamyl alcohol from P. indianae hydrolyzed lignocellulosic biomass. Despite the use of crude untreated plant material, production yields were comparable to optimized rich yeast media due to the use of all available carbon including organic acids, which formed up to 97% of free carbon in the fungal hydrolysate. Furthermore, this work demonstrates that anaerobic fungal pretreatment of lignocellulose can sustain the production of fine chemicals at high efficiency by partnering organisms with broad substrate versatility.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular Architecture and Reactivity of Organic Acids on Kaolinite and Gamma-Alumina

Interactions at mineral surfaces impact the environmental fate of organic materials. Their complexity led us to investigate simpler systems, the interaction of salicylic or myristic acid with ?-alumina or kaolinite from aqueous or hexane solution using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The stability of all the adsorbed materials against removal by water or hexane raises the question of whether this may be a first step toward carbon sequestration. To gain insight, we used fully-loaded samples to explore the exchange of each with its deuterated equivalent and possible displacement by the other acid. Myristic shows almost total exchange on the surface of kaolinite and partial exchange on ?-alumina. All displacement sample spectra always showed presence of both organics. The spectrum of salicylic acid, but not that of myristic acid, was unchanged when applied first.

Bailey, Diana↗

The Influence of Mineralogy on Recovering Organic Acids from Mars Analogue Materials Using the One-Pot Derivatization Experiment on the Sample Analysis at Mars(SAM) Instrument Suite

The search for complex organic molecules on Mars, including important biomolecules such as amino acids and carboxylic acids, will require a chemical extraction and a derivatization step to transform these organic compounds into species that are sufficiently volatile to be detected by gas chromatography mass spectrometry (GCMS). We have developed a ''one-pot'' extraction and chemical derivatization protocol using N-methyl-N-(tert-butyldimethylsilyl) trifluoroacetamide (MTBSTFA) and dimethylformamide (DMF) for the Sample Analysis at Mars (SAM) experiment instrument suite on NASA's the Mars Science Laboratory (MSL) mission. The temperature and duration of the derivatization reaction, pre-concentration of chemical derivatives, and gas chromatographic separation parameters have been optimized under SAM instrument design constraints. MTBSTFA/DMF extraction and derivatization at 300 1C for several minutes of a variety of terrestrial Mars analog materials facilitated the detection of amino acids and carboxylic acids in a surface soil sample collected from the Atacama Desert and a carbonate-rich stromatolite sample from Svalbard. However, the rapid reaction of MTBSTFA with water in several analog materials that contained high abundances of hydrated minerals, and the possible deactivation of derivatized compounds by iron oxides, as detected by XRD/XRF using the CheMin field unit Terra, proved to be highly problematic for the direct extraction of organics using MTBSTFA. The combination of pyrolysis and two different wet-chemical derivatization methods employed by SAM should enable a wide range of organic compounds to be detected by GCMS if present on Mars.

MSL↗

Effect of Ambient Organic Acids on the Water Structure at ${\rm TiO}_{2}$ Interfaces

A molecular-level understanding of the effects of ambient organic compounds on the wettability of titanium dioxide ( ${\rm TiO}_{2}$ ) surfaces is relevant to many of its energy-related and environmental applications. Herein, we focus on two common atmospheric carboxylic acids, formic and acetic acid, and characterize their adsorption/ desorption at the aqueous interfaces of anatase and rutile ${\rm TiO}_{2}$ using molecular dynamics with an ab initio deep neural network potential. Our simulations show that these acids prefer to be localized in the interfacial water layers close to the ${\rm TiO}_{2}$ surface where they are stabilized by the interaction/exchange of their acid proton with a surface oxygen, rather than chemisorb at the surface Ti sites by displacing the adsorbed water. Notably, these acids make the surface of anatase hydrophobic, whereas the larger fraction of adsorbed water dissociation can offset their effect on rutile. Furthermore, these results provide a picture where carboxylic acids control the wettability of ${\rm TiO}_{2}$ largely through acid-base chemistry at the interface rather than chemisorption on the oxide surface, a finding that can help improve the design of self-cleaning surfaces and photocatalytic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detection of dilute organic acids in water by inelastic tunneling spectroscopy

Study of inelastic electron tunneling spectroscopy (IETS) spectra obtained from junctions exposed to dilute solutions of organic molecules in both liquid and vapor phases. The results indicate that it is possible in principle to detect the presence and to measure the concentration of at least some organic molecules in dilute aqueous solution by means of the IETS technique. Some fine points pertaining to the application of this technique are discussed, and it is pointed out that through appropriate refinements IETS may become a valuable tool for analytical water chemistry.

Skarlatos, Y.↗

Nitric acid-organic mixtures surveyed for use in separation by anion exchange methods

Column elution-spectrographic analysis technique compares certain solvents directly to the methanol system, using inert rare earths instead of actinides. Distribution ratios for americium between 90 percent solvent, 10 percent 5 M nitric acid and Dowex 1 nitrate form resin for a large group of organics miscible in water was determined.

Bloomquist, C. A. A.↗