Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPTICAL MODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Heralding efficiency and correlated-mode coupling of near-IR fiber-coupled photon pairs

We report on a systematic experimental study of heralding efficiency and generation rate of telecom-band infrared photon pairs generated by spontaneous parametric down-conversion and coupled to single mode optical fibers. We define the correlated-mode coupling efficiency--an inherent source efficiency--and explain its relation to heralding efficiency. For our experiment, we developed a reconfigurable computer controlled pump-beam and collection-mode optical apparatus which we used to measure the generation rate and correlated-mode coupling efficiency. The use of low-noise, high-efficiency superconducting-nanowire single-photon-detectors in this setup allowed us to explore focus configurations with low overall photon flux. The measured data agree well with theory and we demonstrated a correlated-mode coupling efficiency of 97%±2%, which is the highest efficiency yet achieved for this type of system. These results confirm theoretical treatments and demonstrate that very high overall heralding efficiencies can, in principle, be achieved in quantum optical systems. We expect that these results and techniques will be widely incorporated into future systems that require, or benefit from, a high heralding efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Engineering of slow Bloch modes for optical trapping

In the present paper, we propose an approach based on slow Bloch mode microcavity that enables the optical trapping of small nanoparticles over a broad surface. A specific design based on a double-period photonic crystal is presented. It enables an easy coupling using a wide free-space Gaussian beam and the cavity Q factor can be tuned at will. Moreover, the microcavity mode is mainly localized within the photonic crystal holes, meaning that each hole of the microcavity behaves as efficient nanotweezers. Experimental studies have shown that 200 nm and 100 nm particles can be trapped within the microcavity, in a spatial region that corresponds to the size of one hole (200 nm wide). The experimental trap stiffness has been extracted. It shows that this approach is among the most performant ones if we take into account the size of the cavity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Ballistic photocurrent driven by optical phonon modes in a polaronic ferroelectric

In this study, we investigate the effect of local electron-phonon coupling on nonlinear optical conductivity in an interacting ferroelectric system. Using real-time simulations, we show an enhancement in nonlinear conductivity under linearly polarized light due to generation of the phonon-assisted ballistic current in addition to the injection current generated by electron-hole pairs. The optically excited phonon modes generate an asymmetric carrier distribution that causes a strong directional ballistic current. The ballistic current enhances the photocurrent several times at above band-gap excitation frequencies and is sublinearly dependent on the excitation intensity. This strong phonon-assisted zero-frequency directional ballistic current demonstrates an alternative way to boost the bulk photovoltaic effect (BPVE) in electronic ferroelectric materials with strong local electron-phonon coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRSDate not supplied

Spatial Mode-Diversity Optical Receivers for Free-Space Optical and Quantum Communications

We present an overview of spatial mode-diversity (SMD) receiver systems based on photonic lanterns for space-to-ground optical and quantum communications systems. Recent results are presented for direct-detection pulse-position modulated (PPM) and multi-Gbps coherent communications. We discuss designs for scalability in combination with integrated photonics.

Optical communications↗
DOE OSTI2018

Selective Excitation of Localized Spin-Wave Modes by Optically Pumped Surface Acoustic Waves

We explore the feasibility of exciting localized spin-wave modes in ferromagnetic nanostructures using surface acoustic waves. The time-resolved Faraday effect is used to probe the magnetization dynamics of an array of nickel nanowires. The optical-pump pulse excites both spin-wave modes of the nanowires and acoustic modes of the substrate and we observe that, when the frequencies of these modes coincide, the amplitude of magnetization dynamics is substantially enhanced due to magnetoelastic coupling between the two. Notably, by tuning the magnitude of an externally applied magnetic field, optically excited surface acoustic waves can selectively excite either the upper or lower branches of a splitting in the nanowire’s spin-wave spectrum, which micromagnetic simulations indicate is caused by localization of spin waves in different parts of the nanowire. Furthermore, our results indicate the feasibility of using acoustic waves to selectively excite spatially confined spin waves, an approach that may find utility in future magnonic devices where coherent structural deformations could be used as coherent sources of propagating spin waves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

The performance of CROW structures on detection of virus nanoparticles

Coupled resonator optical waveguide (CROW) structures were investigated as a whispering gallery mode optical resonator for biosensing applications. A single mode optical fiber taper was used to evanescently couple light into the microspheres. We have simulated the theoretical model of the crow structure with two and three microspheres. The coupled-resonator-induced transparency (CRIT) phenomenon was observed in the crow structures. In this paper, two crow structures and a single microsphere resonator are compared with each other. We have reported the high sensitivity of the crow structures compared to a single microsphere. We have demonstrated apparent shifts of CRIT transparent peak when the virus nanoparticles are placed on the surface of the microsphere. As a result, these crow structures can be used as a biosensing sensor with high sensitivity. The theoretical simulation was carried out at the operating wavelength of 1550 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS2009

Critical Coupling Between Optical Fibers and WGM Resonators

Two recipes for ensuring critical coupling between a single-mode optical fiber and a whispering-gallery-mode (WGM) optical resonator have been devised. The recipes provide for phase matching and aperture matching, both of which are necessary for efficient coupling. There is also a provision for suppressing intermodal coupling, which is detrimental because it drains energy from desired modes into undesired ones. According to one recipe, the tip of the single-mode optical fiber is either tapered in diameter or tapered in effective diameter by virtue of being cleaved at an oblique angle. The effective index of refraction and the phase velocity at a given position along the taper depend on the diameter (or effective diameter) and the index of refraction of the bulk fiber material. As the diameter (or effective diameter) decreases with decreasing distance from the tip, the effective index of refraction also decreases. Critical coupling and phase matching can be achieved by placing the optical fiber and the resonator in contact at the proper point along the taper. This recipe is subject to the limitation that the attainable effective index of refraction lies between the indices of refraction of the bulk fiber material and the atmosphere or vacuum to which the resonator and fiber are exposed. The other recipe involves a refinement of the previously developed technique of prism coupling, in which the light beam from the optical fiber is collimated and focused onto one surface of a prism that has an index of refraction greater than that of the resonator. Another surface of the prism is placed in contact with the resonator. The various components are arranged so that the collimated beam is focused at the prism/resonator contact spot. The recipe includes the following additional provisions:

Matsko, Andrey↗
NASA NTRS1984

Distributed strain measurement in a rectangular plate using an array of optical fiber sensors

Single mode optical fiber waveguide has been used to determine the two-dimensional strain distribution on a simply supported rectangular plate. Each of the fifty individual fibers in the rectangular grid array attached to one surface of the plate yields a measurement of the strain integrated along the length of that fiber on the specimen. By using similar sensor information from all of the fibers, both the functional form and the amplitude of the distribution may be determined. Limits on the dynamic range and spatial resolution are indicated. Applications in the measurement of internal strain and the monitoring of physically small critical-structural components are suggested.

Claus, R. O.↗
NASA NTRS1984

Stress concentration measurement in a rectangular plate using an array of embedded optical fibers

Embedded single mode optical fiber waveguide has been used to determine the two-dimensional stress distribution produced by point loading on a simply supported rectangular plate. Each of the fifty individual fibers in the rectangular grid array attached to the plate yields a measurement of the stress integrated along the length of that fiber on the specimen. By using information from all the fibers, both the functional form and the amplitude of the distribution may be determined. Limits on the dynamic range and spatial resolution are indicated. Applications in the measurement of internal stress and the monitoring of physically small critical structural components are suggested.

Claus, R. O.↗
NASA NTRS2014

Whispering Gallery Optical Resonator Spectroscopic Probe and Method

Disclosed herein is a spectroscopic probe comprising at least one whispering gallery mode optical resonator disposed on a support, the whispering gallery mode optical resonator comprising a continuous outer surface having a cross section comprising a first diameter and a second diameter, wherein the first diameter is greater than the second diameter. A method of measuring a Raman spectrum and an Infra-red spectrum of an analyte using the spectroscopic probe is also disclosed.

Anderson, Mark S.↗
DOE OSTI2016

Electronic structure and electron-phonon coupling in TiH$_2$

Calculations using first principles methods and strong coupling theory are carried out to understand the electronic structure and superconductivity in cubic and tetragonal TiH$_2$. A large electronic density of states at the Fermi level in the cubic phase arises from Ti-$t_{2g}$ states and leads to a structural instability against tetragonal distortion at low temperatures. However, constraining the in-plane lattice constants diminishes the energy gain associated with the tetragonal distortion, allowing the cubic phase to be stable at low temperatures. Furthermore, calculated phonon dispersions show decoupled acoustic and optic modes arising from Ti and H vibrations, respectively and frequencies of optic modes to be rather high. The cubic phase has a large electron-phonon coupling parameter $\lambda$ and critical temperature of several K. Contribution of the hydrogen sublattice to $\lambda$ is found to be small in this material, which we understand from strong coupling theory to be due to the small H-$s$ DOS at the Fermi level and high energy of hydrogen modes at the tetrahedral sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1991

Selective mode injection and observation for few-mode fiber optics

By etching the cladding along several millimeters of circular- or elliptical-core few-mode fiberoptics, access to the core is achieved and extremely pure modes can be injected. The same etching technique allows measurement of the modal purity at the far end of the fiber. Modal purities of -26 dB have been obtained. A holographic technique is also demonstrated that allows all the light of each mode to be focused to an independent spot.

Shaklan, Stuart↗
NASA NTRS1990

Elliptical-core two-mode optical-fiber sensor implementation methods

We present experimental methods for the practical implementation of few-mode elliptical-core sensors. Techniques for desensitizing the lead-in and lead-out fibers are discussed and results of a vibration sensor embedded in a graphite-epoxy composite are presented. A scheme using a single-mode elliptical-core fiber as the lead-in fiber and an offset circular-core single-mode fiber as the lead-out fiber is successfully implemented. Detection techniques for few-mode fiber sensors are reviewed and a novel fringe-counting method to unambiguously detect the amplitude and direction of dynamic strain is reported for the first time.

Murphy, Kent A.↗
DOE OSTI2019

Vibrational and electron-phonon coupling properties of $β$-Ga 2 O 3 from first-principles calculations: Impact on the mobility and breakdown field

The wide band gap semiconductor $β$-Ga 2 O 3 shows promise for applications in high-power and high-temperature electronics. The phonons of $β$-Ga 2 O 3 play a crucial role in determining its important material characteristics for these applications such as its thermal transport, carrier mobility, and breakdown voltage. In this work, we apply predictive calculations based on density functional theory and density functional perturbation theory to understand the vibrational properties, phonon-phonon interactions, and electron-phonon coupling of $β$-Ga 2 O 3 . We calculate the directionally dependent phonon dispersion, including the effects of LO-TO splitting and isotope substitution, and quantify the frequencies of the infrared and Raman-active modes, the sound velocities, and the heat capacity of the material. Our calculated optical-mode Grüneisen parameters reflect the anharmonicity of the monoclinic crystal structure of $β$-Ga 2 O 3 and help explain its low thermal conductivity. We also evaluate the electron-phonon coupling matrix elements for the lowest conduction band to determine the phonon mode that limits the mobility at room temperature, which we identified as a polar-optical mode with a phonon energy of 29 meV. We further apply these matrix elements to estimate the breakdown field of $β$-Ga 2 O 3 . Our theoretical characterization of the vibrational properties of $β$-Ga 2 O 3 highlights its viability for high-power electronic applications and provides a path for experimental development of materials for improved performance in devices.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Physical properties and applications of In{sub x}Ga{sub 1−x}N nanowires

We have successfully grown In{sub x}Ga{sub 1−x}N nanowires by plasma-assisted molecular beam epitaxy on silicon substrates. The alloy composition and crystal quality have been analyzed by Raman scattering, photoluminescence spectroscopy and x-ray fluorescence nanoprobe techniques. In{sub x}Ga{sub 1−x}N is an one-mode alloy, where the different optical modes have an intermediate frequency of that of pure InN and GaN. The sample composition can be derived from the Raman data. On the other hand, by using the optical gap provided by the emission spectra, we conclude that the samples have a lower Ga content than that provided by the Raman analysis. X-ray fluorescence maps and photoluminescence measured in single nanowires help to explain this contradictory result.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS2005

Nonlinear optical whispering gallery mode resonators

Whispering gallery mode (WGM) optical resonators comprising nonlinear optical materials, where the nonlinear optical material of a WGM resonator includes a plurality of sectors within the optical resonator and nonlinear coefficients of two adjacent sectors are oppositely poled.

Ilchenko, Vladimir↗
DOE OSTI2014

Continuous Variable Cluster State Generation over the Optical Spatial Mode Comb

One way quantum computing uses single qubit projective measurements performed on a cluster state (a highly entangled state of multiple qubits) in order to enact quantum gates. The model is promising due to its potential scalability; the cluster state may be produced at the beginning of the computation and operated on over time. Continuous variables (CV) offer another potential benefit in the form of deterministic entanglement generation. This determinism can lead to robust cluster states and scalable quantum computation. Recent demonstrations of CV cluster states have made great strides on the path to scalability utilizing either time or frequency multiplexing in optical parametric oscillators (OPO) both above and below threshold. The techniques relied on a combination of entangling operators and beam splitter transformations. Here we show that an analogous transformation exists for amplifiers with Gaussian inputs states operating on multiple spatial modes. By judicious selection of local oscillators (LOs), the spatial mode distribution is analogous to the optical frequency comb consisting of axial modes in an OPO cavity. We outline an experimental system that generates cluster states across the spatial frequency comb which can also scale the amount of quantum noise reduction to potentially larger than in other systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗