Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ni”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Measurement and analysis of distribution coefficients in Fe-Ni alloys containing S and/or P. I - K sub Ni and K sub P

The distribution coefficients of Ni and P in Fe-Ni-S-P alloys are determined using a plane front solidification technique. It is found that the distribution coefficient of Ni is altered only when both S and P are present as alloy constituents; the coefficient increases with S and P contents in the liquid alloy and varies from 0.9 to 1.30. The behavior of the distribution coefficient of P is determined by the S/P ratio in the liquid; the coefficient increases with the S/P ratio and varies from 0.25 to 5.8. Expressions are presented which relate the distribution coefficients of Ni and P to the S and P contents in the liquid.

Sellamuthu, R.↗
NASA NTRS2000

Design of a 10.8 kWh, 28V Ni-MH Battery Using Commercial Ni-MH Cells

This paper describes the design of a 10.8 kWh, 28V, Ni-MH battery using commercial off-the shelf (COTS) 4/3A Ni-MH cells for the X-38 vehicle, an experimental version of the Crew Return Vehicle (CRY). This will be an autonomous vehicle that will enable International Space Station crews to return to earth in the event of a medical, or other, emergency. The X-38 will be powered by 3 batteries: a 32 V primary battery, which will power the vehicle avionics for up to 7 hours for a loiter and de-orbit phase of the descent; a 28 V Ni-MH battery which will take over for the primary battery after de-orbit until landing, and a 270V Ni-Cd battery, which will be used to power electromechanical actuators and the winches controlling a parachute for landing.

Hellen, Robert M.↗
DOE OSTI2021

Interplay Between Cation and Anion Redox in Ni-Based Disordered Rocksalt Cathodes

The reversibility of the redox processes plays a crucial role in the electrochemical performance of lithium-excess cation-disordered rocksalt (DRX) cathodes. Here, we report a comprehensive analysis of the redox reactions in a representative Ni-based DRX cathode. The aim of this work is to elucidate the roles of multiple cations and anions in the charge compensation mechanism that is ultimately linked to the unique electrochemical performance of Ni-based DRX cathodes. Generally, the low-voltage discharge plateau that results in the low energy efficiency and strong voltage hysteresis is associated with the low-voltage oxygen redox. However, incorporating Mo cation promotes the oxygen activity and the Mo migration between octahedral and tetrahedral sites enhances the O reduction potential as well as energy efficiency. This work highlights the important role that electrochemically inactive transition metal plays in the redox chemistry and provides useful insights into the potential pathway to further address the challenges in Ni-based DRX systems.

Yue, Yuan↗
DOE OSTI2025

Uncovering the Critical Role of Ni on Surface Lattice Stability in Anionic Redox Active Li 1.2 Ni 0.2 Mn 0.6 O 2

Anionic redox reaction (ARR) can provide extra capacity beyond transition metal (TM) redox in lithium-rich TM oxide cathodes. Practical ARR application is much hindered by the structure instability, particularly at the surface. Oxygen release has been widely accepted as the ringleader of surficial structure instability. However, the role of TM in surface stability has been much overlooked, not to mention its interplay with oxygen release. Herein, TM dissolution and oxygen release are comparatively investigated in Li 1.2 Ni 0.2 Mn 0.6 O 2 . Ni is verified to detach from the lattice counter-intuitively despite the overwhelming stoichiometry of Mn, facilitating subsequent oxygen release of the ARR process. Intriguingly, surface reorganization occurs following regulated Ni dissolution, enabling the stabilization of the surface and elimination of oxygen release in turn. Accordingly, a novel optimization strategy is proposed by adding a relaxation step at 4.50 V within the first cycle procedure. Battery performance can be effectively improved, with voltage decay suppressed from 3.44 mV/cycle to 1.60 mV/cycle, and cycle stability improved from 66.77% to 90.01% after 100 cycles. This work provides new perspectives for clarifying ARR surface instability and guidance for optimizing ARR performance.

25 ENERGY STORAGE↗
DOE OSTI2024

Electrochemically Assisted Single Crystal Growth of Reduced Preyssler Polyoxometalates Decorated with M 2+ ( M = Co, Ni) and Cubane–Like Ni 4 O 4 Units

Polyoxometalates (POMs) are of great interest to the scientific community, and their reduction and nucleation have been well–established by multi–step techniques. The present study develops an electrochemical approach for simultaneous reduction and nucleation of polyoxometalate–containing solids. Herein we report crystal growth of reduced Preyssler polyoxotungstate–based (anionic formula [NaP 5 W 30 O 110 ] 14– ) new crystalline solids made of Preyssler anions interlinked by Co 2+ and Ni 2+ ions. Crystal nucleation and in situ reduction were achieved at room temperature using a two silver wire electrode setup in various aqueous solutions under constant applied potentials. The POM material was deposited on the cathode, and its structure was characterized by X–ray diffraction techniques. The primary structure type observed involves POMs decorated by disordered Co 2+ /Ni 2+ octahedra and fused into 1–D pillars by additional Co 2+ /Ni 2+ octahedra. Additionally, a secondary phase was observed in the Ni–based reactions, where reduced Preyssler anions are decorated by Ni 4 O 4 cubane–like units. To understand the electrochemical process, polarization curves of the electrolyte solutions are presented, suggesting an applied potential best suited for crystal growth. The work highlights the effectiveness of an electrochemical pathway where nucleation and simultaneous reduction of POMs can make novel reduced POM solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Study of the effects of implantation on the high Fe-Ni-Cr and Ni-Cr-Al alloys

A theoretical study of the effects of implantation on the corrosion resistance of Fe-Ni-Cr and Ni-Cr-Al alloys was undertaken. The purpose was to elucidate the process by which corrosion scales form on alloy surfaces. The experiments dealt with Ni implanted with Al, exposed to S at high temperatures, and then analyzed using scanning electron microscopy, scanning Auger spectroscopy and X-ray fluorescence spectroscopy. Pair bonding and tight-binding models were developed to study the compositions of the alloys and as a result, a new surface ordering effect was found which may exist in certain real alloys. With these models, the behavior of alloy constituents in the presence of surface concentrations of O or S was also studied. Improvements of the models to take into account the important effects of long- and short-range ordering were considered. The diffusion kinetics of implant profiles at various temperatures were investigated, and it was found that significant non-equilibrium changes in the profiles can take place which may affect the implants' performance in the presence of surface contaminants.

Ribarsky, M. W.↗
DOE OSTI2025

Upcycling Mixed Spent Ni-Lean Cathodes into Ni-Rich Polycrystalline Cathodes

Sustainable battery recycling is vital for conserving resources and reducing environmental impacts. Current open- and closed-loop recycling strategies often focus on recovering individual components, making the reuse of mixed cathode materials a complex challenge. Meanwhile, the research on upcycling has been limited to using pristine cathode feedstocks and virgin materials for synthesis. Here, to address this issue, we present an upcycling approach for spent Ni-lean mixed cathode materials that integrate an upcycling hydrometallurgical recycling process with traditional hydrometallurgical methods. This strategy achieves a utilization of 92.31 mol % of recycled materials, enabling the regeneration of Ni-rich cathode materials while significantly reducing the reliance on virgin resources. The regenerated 83Ni cathode materials demonstrate physical properties comparable to those produced from virgin materials. Electrochemical evaluations using single-layer pouch cells show that both recycled and virgin cathodes exhibit initial specific capacity close to 201.1 mAh/g and maintain approximately 88 % capacity retention after 500 cycles. Additionally, 2Ah cells confirmed these findings, delivering 85 % capacity retention after about 900 cycles. Techno-economic analysis demonstrates notable environmental benefits, including reductions in greenhouse gas emissions and energy consumption, achieving 232.75 MJ/kg of product, which is 8.6 % lower than traditional methods and comparable to direct upcycling. Furthermore, the upcycling hydrometallurgical recycling process generates the highest profit, proving its economic viability. This scalable and versatile process is adaptable to varying transition metal compositions, facilitating a closed-loop recycling system that bridges mixed spent cathodes with next-generation cathode materials, and offers a sustainable solution for managing waste battery materials.

Hydrometallurgical recycling↗
DOE OSTI2020

The sensitive surface chemistry of Co-free, Ni-rich layered oxides: identifying experimental conditions that influence characterization results

Recent studies have suggested that Co-free, Ni-rich layered cathodes (e.g., doped LiNiO2) can provide promising battery performance for practical applications. However, these layered cathodes suffer from significant surface instability during various stages of the sample history, which generates inherent challenges for achieving stable battery performance and obtaining statistically representative characterization results. To reliably report the surface chemistry of these materials, delicate controls of stepwise sample preparation are required. In this study, we aim to reveal how the surface chemistry of LiNiO2 based materials changes with various environments, including human exhalation, sample storage, sample preparation, electrochemistry cycling, and surface doping. Our results demonstrate that the surface of these materials is highly reactive and prone to alter at various stages of sample handling and characterization. The sensitive surface could impact the interpretation of the surface chemical and structural information, including surface carbonate formation, transition metal reduction and dissolution, and surface reconstruction. Importantly, the heterogeneity of the surface degradation calls for a consolidation of nanoscale, high-resolution characterization, and ensemble-averaged methods in order to improve statistical representation. Furthermore, the doping chemistry can effectively mitigate the surface degradation and improve overall battery performance due to the enhanced surface oxygen retention. Our study highlights the necessity of strict measurements through complementary characterizations at multiple length scales to eliminate unintentional biased conclusions.

surface chemistry, Co-free Ni-rich cathodes, Istab↗
DOE OSTI2020

In situ and ex situ studies of anomalous eutectic formation in undercooled Ni–Sn alloys

Anomalous eutectic formation in undercooled Ni-Sn alloys was investigated by in situ X-ray diffraction and ex situ remelting and annealing experiments. Dynamic recrystallization and partial remelting of primary solids followed by repeated nucleation and growth of eutectic grains in the mushy zone were revealed by time-resolved X-ray diffraction. Ex situ experiments demonstrated that partial remelting of near-equilibrium solidified alloys of eutectic or near-eutectic composition can convert regular lamellar eutectic into anomalous eutectic, whereas high-temperature annealing of splat-quenched alloys of similar composition can convert eutectic or two-phase dendrites into anomalous eutectic. It is concluded that compared to ripening in solid-states, partial remelting of eutectic or two-phase dendrites in a mushy zone provides a more realistic mechanism for anomalous eutectic formation in undercooled solidification of Ni-Sn eutectic alloys. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Crystal growth↗
DOE OSTI2025

Etching-assisted upcycling of Ni-lean to Ni-rich cathode materials

Upcycling is recognized as a sustainable recycling approach for spent lithium-ion batteries. However, existing upcycling methods typically involve intricate pretreatment or post-treatment steps, complicating their practical application. Here, in this study, we propose a straightforward, etching-assisted upcycling method that effectively transforms polycrystalline Ni-lean cathodes into high-performance single crystal Ni-rich cathodes. During the etching step, nickel acetate was dissolved into acetic acid and then polycrystalline NMC111 are etched in the solution. Finally, polycrystalline NMC111 are converted into single crystal particles coated with amorphous nickel acetate. This significantly enhances elemental diffusion during subsequent sintering by minimizing both particle size and the contact distance between NMC111 and nickel acetate. As elemental diffusion is improved and acetate ions decompose completely during sintering, the process requires neither additional pretreatment nor post-treatment. The resulting cathode materials (Etched-UP622) exhibit superior structural and electrochemical properties compared to the Control622, achieving an energy density of 719.7 Wh/kg, approximately 56.7 mAh/g higher than Control622 and 125.5 Wh/kg higher than NMC111. Etched-UP622 also delivers higher discharge capacity, improved rate performance and cycling stability, surpassing Control622 and NMC111. Meanwhile, NMC811 also can be synthesized by the proposed strategy, and the discharge capacity can reach 166.9 mAh/g at 1C, similar to 14 mAh/g higher than Control811. Overall, this etching-assisted strategy simplifies the upcycling process and offers a scalable, sustainable route for producing high-quality cathode materials.

Acid etching↗
DOE OSTI2021

Comment on Improved CO 2 Hydrogenation on Ni–ZnO/MCM-41 Catalysts with Cooperative Ni and ZnO Sites

A recent publication from Murthy et al.1 describes experiments in which they proposed the hypothesis that a bifunctional catalyst consisting of adlineated,2 nanometer-sized domains of Ni and ZnO, confined within the pores of MCM-41, hydrogenates carbon dioxide adsorbed on the ZnO using hydrogen atoms produced by the Ni-catalyzed dissociation of H2. The reanalysis of their data presented below suggests that the reaction rates they employed to test their hypothesis, when properly normalized, show little to no effect of bifunctionality. This closer inspection of their data raises the possibility that the observed effects may instead arise from experimental artifacts (e.g., different levels of conversion, finite rates of mass transport) or morphological correlations that were not considered by the authors.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Degradation in Ni-Rich LiNi 1– x – y Mn x Co y O 2 /Graphite Batteries: Impact of Charge Voltage and Ni Content

Ni-rich LiNi 1– x–y Mn x CoyO 2 (NMC) materials are attractive as cathodes for Li-ion batteries due to their high energy density and low Co content. However, these materials may display poor electrochemical reversibility relating to structural and interfacial instabilities. The influence of Ni content and level of delithiation during charge on degradation mechanisms and relevance to electrochemical cycling behavior are probed for LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode materials in a full cell configuration under two upper voltage limits (4.1 and 4.3 V). The combined use of dQ/dV analysis of electrochemical voltage profiles, operando XRD, and postcycling scanning electron microscopy (SEM) measurements indicates that a major contributor to capacity fade is the large anisotropic volume change from an H2 $\leftrightarrows$ H3 phase transition and associated mechanical degradation particularly for NMC811. Notably, transition metal dissolution and deposition on the negative electrode are found to correlate with the structural changes occurring in the cathode under high voltage charge. X-ray photoelectron spectroscopy (XPS) analyses of the cycled cathodes reveal a more organic-rich cathode–electrolyte interphase (CEI) when cycling to 4.3 V with lower relative amounts of LiF. Surface reconstruction is not a significant factor under these cycling conditions as determined by soft X-ray absorption spectroscopy (sXAS) analysis. The results emphasize the opportunity to match the electrochemical test parameters with the specific NMC active material to mitigate degradation and extend cycle life.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ni-Rich Li[Ni x MnyCo 1– x – y ]O 2 Single Crystals as Superior Fast Charge Cathodes for Lithium-Ion Batteries

The utilization of single-crystal (SC) Li[Ni x MnyCo 1-x-y ]O 2 (NMC) cathodes has facilitated unparalleled performance in commercial high-energy lithium-ion batteries (LIBs). In the current study, we evaluate the application of SC cathodes in fast charge (FC)-LIBs where particle cracking is a predominant failure mechanism. Ni-rich SC-NMC samples with various compositions, sizes, and shapes are synthesized and investigated for their influence on FC performance. We reveal the necessity of utilizing smaller SCs (<1 μm) as larger sizes (>2 μm) experience significant particle-level lithium concentration gradients under FC conditions. To improve lithium transport and minimize side reactivities, we strategically expose the (104) crystal facets on the surface. Exceptional performance was observed on an optimized SC-LiNi 0.80 Mn 0.05 Co 0.15 O 2 , delivering a discharge capacity of 165 mAh/g even after 150 cycles at 6C charge. Our study not only demonstrates the promise of SC-NMC but also provides the key insights for the design and optimization of advanced cathodes for FC-LIBs.

25 ENERGY STORAGE↗
DOE OSTI2024

Electronic structure, magnetic correlations, and superconducting pairing in the reduced Ruddlesden-Popper bilayer La 3 Ni 2 O 6 under pressure: Different role of d 3 z 2 - r 2 orbital compared with La 3 Ni 2 O 7

The recent discovery of superconductivity in bilayer La 3 Ni 2 O 7 (327-LNO) under pressure stimulated much interest in layered nickelates. However, superconductivity was not found in another bilayer nickelate system, La 3 Ni 2 O 6 (326-LNO), even under pressure. To understand the similarities and differences between 326-LNO and 327-LNO, using density functional theory and the random phase approximation (RPA), we systematically investigate 326-LNO under pressure. The large crystal-field splitting between the e g orbitals caused by the missing apical oxygen moves the d 3z 2 -r 2 orbital farther away from the Fermi level, implying that the d 3z 2 -r 2 orbital plays a less important role in 326-LNO than in 327-LNO. This also results in a smaller bandwidth for the d x 2 -y 2 orbital and a reduced energy gap for the bonding-antibonding splitting of the d 3z 2 -r 2 orbital in 326-LNO, as compared to 327-LNO. Moreover, the in-plane hybridization between the d x 2 -y 2 and d 3z 2 -r 2 orbitals is found to be small in 326-LNO, while it is much stronger in 327-LNO. Furthermore, the low-spin ferromagnetic state is found to be the likely ground state in 326-LNO under high pressure. The weak interlayer coupling suggests that s ± -wave pairing is unlikely in 326-LNO. The robust in-plane ferromagnetic coupling also suggests that d-wave superconductivity, which is usually caused by antiferromagnetic fluctuations of the d x 2 -y 2 orbital, is also unlikely in 326-LNO. These conclusions are supported by our many-body RPA calculations of the pairing behavior. Additionally, contrasting with the cuprates, for the bilayer cuprate HgBa 2 CaCu 2 O 6 , we find a strong self-doping effect of the d x 2 -y 2 orbital under pressure, with the charge of Cu being reduced by approximately 0.13 electrons from 0 GPa to 25 GPa. In contrast, we do not observe such a change in the electronic density in 326-LNO under pressure, establishing another important difference between the nickelates and the cuprates.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fabrication of Thin III-V Solar Cells on Ni Films using Electroless Ni Deposition

Thin solar cells are inherently fragile, and must be properly supported during fabrication, handling and use. Metal films can provide this support, but accomplishing this can be challenging. Here we describe a method for fabricating thin III-V solar cells on Ni films, using electroless deposition to deposit a thick (10-50 um) Ni film onto the bottom of an inverted III-V solar cell prior to substrate removal. Cells have been fabricated on both rigid and flexible supports with no loss of performance when compared to cells processed using standard inverted-cell processing.

14 SOLAR ENERGY↗