Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “National Campaign”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Micropulse Differential Absorption Lidar (MPD) Network Demonstration Field Campaign Report

The National Center for Atmospheric Research (NCAR) and Montana State University (MSU) are nearing completion of a National Science Foundation (NSF) major research instrumentation grant to build five micropulse differential absorption lidars (MPDs) for water vapor profiling. The first demonstration of the MPD configured as a five-unit network occurred at the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility Southern Great Plains (SGP) field sites near Lamont, Oklahoma from 17 April–21 July 2019 for a total of 96 days of operation. The field deployment was funded in part by DOE (which provided support for the MPD installation, power at the field sites, personnel to launch 3-hourly radiosondes from the Central Facility, and the cost of the radiosondes themselves), internal NCAR funds (to support the MPD shipping costs and NCAR staff travel expenses), and NSF/Major Research Instrumentation (MRI) funds (to support the MSU travel expenses to participate in the instrument setup).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

National Weather Service Radiosonde Evaluation Field Campaign Report

The purpose of the campaign was to perform a full evaluation of participating vendor’s radiosondes to qualify for potential use in the National Weather Service (NWS) upper air field operations. The NWS has specific requirements that vendors systems were evaluated against to determine if the vendor’s radiosonde performs within specifications. For this evaluation, the NWS was pursuing commercial off-the-shelf (COTS) ground/tracking systems in the 403 MHz frequency band over the previously used Telemetry Receiving System (TRS) and house-built software using the 1680 MHz frequency. The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) observatory served as the warm and dry test region. The radiosondes were assessed for precision of the radiosonde (unit under test versus itself) and accuracy of the radiosonde’s humidity measurements (unit under test versus a cryogenic frostpoint hygrometer [CFH]).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Sandia National Laboratories FY20 Progress Report

The Energetic Neutrons campaign led by Sandia National Laboratories (SNL) had a successful year testing electronic devices and printed circuit boards (PCBs) under 14 MeV neutron irradiation at OMEGA. During FY20 the Energetic Neutrons campaign increased the number and complexity of experiments, continued collaborations with external organizations, and generated knowledge that supports SNL’s National Security mission. In FY20 the Energetic Neutrons campaign was executed by an early career team led by a new PI. The SNL team members were trained to take over new responsibilities during the shot day to increase the number and complexity of experiments in the campaigns. Also, in FY20 for the first time the Energetic Neutrons campaign had a graduate student contributing with pre and post-irradiation characterizations at SNL of the semiconductor devices irradiated at OMEGA. In FY20 SNL collaborated with the Air Force Nuclear Weapons Center (AFNWC) and supported experiments related to radiation effects in semiconductor devices. SNL also gave the opportunity to ride along to Los Alamos National Laboratory and multiple scientists from MIT and LLE. SNL continued using the last two generations of the Neutron Effects Diagnostics (NEDs) to field active and passive experiments but also redesigned the latest generation of the NEDs to accommodate larger components and improve the vacuum sealing as shown in figure 1a. The redesigned NEDs allowed SNL to perform active tests of a high voltage (HV) PCB for the first time at OMEGA; where signals before, during and after the irradiation were recorded. The HV PCB installed in one of the SNL NEDs is shown in figure 1b where a 3D-printed nosecone was used to check for mechanical and electrical interference. Passive irradiations of multiple components were followed up with leakage current, gain measurements and radiation-induced defect characterization.

42 ENGINEERING↗
DOE OSTI2024

High-yield implosion modeling using the Frustraum: Assessing and controlling the formation of polar jets and enhancing implosion performance with applied magnetization

Frustraums have a higher laser-to-capsule x-ray radiation coupling efficiency and can accommodate a large capsule, thus potentially generating a higher yield with less laser energy than cylindrical Hohlraums for a given Hohlraum volume [Amendt et al., Phys. Plasmas 26, 082707 (2019]. Frustraums are expected to have less m = 4 azimuthal asymmetries arising from the intrinsic inner-laser-beam geometry on the National Ignition Facility. An experimental campaign at Lawrence Livermore National Laboratory to demonstrate the high-coupling efficiency and radiation symmetry tuning of the Frustraum has been under way since 2021. Simulations benchmarked against experimental data show that implosions using Frustraums can achieve more yield with higher ignition margins than cylindrical Hohlraums using the same laser energy. Hydrodynamic jets in capsules along the Hohlraum axis, driven by radiation-flux asymmetries in a Hohlraum with a gold liner on a depleted uranium (DU) wall, are present around stagnation, and these “polar” jets can cause severe yield degradation. The early-time Legendre mode P4<0 radiation-flux asymmetry is a leading cause of these jets, which can be reduced by using an unlined DU Hohlraum because the shape of the shell is predicted to be more prolate. Magnetization can increase the implosion robustness and reduce the required hotspot ρR for ignition; therefore, magnetizing the Frustraum can maintain the same yield while reducing the required laser energy or increase the yield using the same laser energy—all under the constraint that the ignition margin is preserved. Reducing polar jets is particularly important for magnetized implosions because of the intrinsic toroidal hotspot ion temperature topology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

233 U oxide Measurement Campaign Data: Passive and Active Neutron Multiplicity Measurements of Uranium Oxide Samples at Oak Ridge National Laboratory

During FY2023, three measurement campaigns were conducted at Oak Ridge National Laboratory. The goal was to quantify the neutron signatures of samples of uranium oxide containing uranium 233 and uranium-235. This report presents the neutron multiplicity data obtained using the large volume active well coincidence counter (LV-AWCC).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Land-Surface Temperature Transitions at the Bankhead National Forest (LASTT-BNF) Field Campaign Report

Land surface types that are common in the Southeast United States (e.g., forests, agriculture, urban) can play key roles in the regulation of surface-atmosphere energy exchange and boundary-layer evolution in the region (Hinkle et al. 2024). Heterogeneity in these land-surface types and associated emissivities can drive strong transitions in land surface temperature (LST), which is an important component of the surface energy balance. Within the forested canopy surrounding the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s field deployment at the Bankhead National Forest (BNF) in Alabama main site (M1) (Kuang et al. 2026), the different components of the vegetation and ground surface can create strong gradients in surface temperature that can influence the canopy thermal environment and vegetative function (e.g., stress, transpiration), both of which can have important, yet poorly characterized, controls on lower atmospheric processes (e.g., thermal turbulence, secondary circulations).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Sandia National Laboratories FY21 Progress Report

The Energetic Neutrons campaign led by Sandia National Laboratories (SNL) had a successful year testing electronic devices and printed circuit boards (PCBs) under 14 MeV neutron irradiation at OMEGA. During FY21 Sandia’s Neutron Effects Diagnostics (NEDs) and data acquisition systems were upgraded to test novel commercial off-the-shelf and Sandia-fabricated electronic components that support SNL’s National Security mission. The upgrades to the Sandia platform consisted of new cable chains, sample mount fixtures and a new fiber optics platform for testing optoelectronic devices.

42 ENGINEERING↗
NASA NTRS2005

Coupling of the Inner Magnetosphere with the Underlying Atmosphere and Ionosphere

The following is a final report summarizing our very successful inner magnetosphere research program through which we have made significant contributions to: (1) research through data analysis, modeling and participation in community-wide campaigns, (2) the development of the space science discipline through leadership in national and international campaigns, service on steering committees, review panels and the development and maintenance of campaign and community web sites, (3) education and human resources by the participation of graduate, undergraduate and high school students in our research programs and (4) outreach through development of web-based materials and interactive games. We describe each of these activities below.

Sharber, James M.↗
DOE OSTI2024

EPCAPE-Partitioning Thrust-Los Alamos National Laboratory (EPCAPE-PT-LANL) Field Campaign Report

Coastal cities offer a unique environment for studying aerosol-cloud interactions and the effects of urban emissions on aerosol and cloud properties. As part of the U.S. Department of Energy Atmospheric Radiation Measurement (ARM)’s Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE), the Partitioning Thrust by Los Alamos National Laboratory (EPCAPE-PT-LANL) was conducted to complement the science goals of EPCAPE and add additional in-depth measurements of aerosols and clouds at Mt. Soledad. Our campaign focused on measuring the physical, optical, and chemical properties of aerosols, trace gases, and their interactions within marine stratocumulus clouds in La Jolla, California (see Figure 1).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

TEX-HEU: Integral Experiments with Highly Enriched Uranium and Polyethylene (IER-297 CED-3b Report)

This report documents the experimental critical configurations and measurements for IER-297, Thermal/Epithermal eXperiments (TEX) using highly enriched uranium (HEU) fuel, moderated and reflected by polyethylene. These experiments establish the baseline TEX-HEU configurations spanning thermal, intermediate, and fast fission energy regimes. The experiment campaign was completed in FY2020 at the National Critical Experiments Research Center at the Nevada National Security Site. The campaign produced six documented critical configurations (0”, ¹/₈” A, ¹/₈” B, ¹/₄”, ¹/₂”, and 1¹/₂”) and one reproducibility measurement (¹/₈” R). Table 1 summarizes these seven experiments along with their period and calculated reactivity, in order of execution. The Comet General Purpose Critical Assembly Machine was used to conduct the TEX-HEU experiments. The HEU fuel consists of U(93+) plates, collectively known as the “Jemima” plates. Each experiment consisted of an alternating stack of these HEU plates with or without polyethylene moderator plates. By varying the thicknesses of the polyethylene plates, the neutron spectrum of the experiment could be fine-tuned to a specific fission energy regime. The experiments were reflected by 1” of polyethylene consisting of a bottom and top plate and outer reflector rings to surround the HEU and polyethylene plates. The fine reactivity control of the system was provided by the thickness of the top reflector plate, which could be varied in increments of ¹/₃₂”.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Empirical Bounding Analysis and User Recommendations for a Neutron Multiplicity Detector

Neutron multiplicity detectors are useful for a variety of applications including nuclear emergency response, nuclear nonproliferation, safeguards, and criticality safety. When measuring black-box problems (i.e., when the system being measured is completely unknown) with systems that have relatively low detection efficiency, expert analysis is frequently required to determine appropriate bounds for system parameters such as neutron multiplication and neutron leakage. This is because the detection efficiency can vary wildly, which also means that the resulting system parameters can have large variations. This work applies an empirical approach to provide bounds on system parameters (such as system multiplication, neutron leakage, and detector efficiency). The results of this bounding analysis are then used as inputs to provide recommendations to users regarding criticality safety. In addition to describing the method used, this work provides sample results from a measurement campaign performed at the National Criticality Experiments Research Center (NCERC).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Assessment of rare earth element fractionation in NIF implosions with radiochemically doped capsules

An ongoing experimental campaign at the National Ignition Facility (NIF) aims to measure neutron induced nuclear reaction cross–sections using radiochemically doped target capsules. Critical to this campaign is the ability to collect a representative sample of the reaction products using Solid Radiochemical Collectors (SRCs) fielded around the NIF chamber. The shot presented in this paper used a doped target capsule with a neopentane gas fill was to investigate the ratio of isotopes collected at three chamber angles. It was found that SRC samples of rare earth elements collected from NIF are representative of the ingoing dopant mix, thereby concluding that fractionation does not occur during a NIF implosion. This validates the doped capsule method for use in measuring neutron induced reaction cross-sections.

Capsule Doping↗
DOE OSTI2023

Characterizing PuO 2 Powder at Oak Ridge National Laboratory for the Multi-Lab Plutonium Process Signatures Campaign FY 2022

This report highlights the development of advanced analytical capabilities at Oak Ridge National Laboratory to characterize PuO 2 powder to support the Multi-Lab Plutonium Process Signatures Campaign in FY 2022. Two samples from a batch of 76 statistical precipitation runs were packaged and shipped from Pacific Northwest National Laboratory to Oak Ridge National Laboratory at the beginning of FY 2022. Techniques were used to characterize the sample, including powder X-ray diffraction, Raman spectroscopy, and diffuse reflectance spectroscopy. A brief description of each technique, the results and discussion, and future work are described in this report. Opportunities to expand current capabilities and include additional analytical capabilities for the next campaign will also be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Spent Nuclear Fuel Mechanical Loads in the General Package Drop Scenario

The US Department of Energy Spent Fuel and Waste Science and Technology program is performing research to determine the mechanical loading conditions applied to spent nuclear fuel (SNF) during normal conditions of transportation to inform mechanical tests of SNF and close an important knowledge gap related to the practical disposition of SNF in the US. A recent multi-national collaborative test campaign measured SNF assembly impact response to the 30 cm horizontal package drop scenario, which is a common regulatory basis test of SNF package design. Researchers at Pacific Northwest National Laboratory (PNNL) are using the test data to validate explicit finite element models to calculate the mechanical loads and structural response of spent nuclear fuel assemblies in the as-tested 30 cm horizontal package drop scenario. Once the as-tested package drop model is validated, the next step is to apply the model to the general 30 cm drop scenario, which includes all impact angles, all fuel assembly types, and all burnup conditions. PNNL is developing a damage model that will incorporate the results of finite element parametric studies to establish trends in SNF mechanical loading to various input parameters, like impact orientation and burnup. The damage model will have the capability to estimate mechanical loads for any single set of input parameters, but it will first be used to describe the upper bounds of potential SNF loading in the 30 cm drop scenario. This paper describes PNNL’s progress toward developing the general solution to the problem of spent nuclear fuel mechanical loads in the 30 cm package drop scenario and it describes the next steps in closing the knowledge gap.

Klymyshyn, Nicholas A.↗
NASA NTRSDate not supplied

Overview of Community Response Testing Campaign with NASA's X-59 Aircraft

Prohibition of civil supersonic flight over land became federal regulation in 1973, currently codified in 14 CFR Part 91.817. Of concern, the sonic booms that result when aircraft travel at supersonic speeds were deemed an untenable source of noise affecting populations directly under and near flight paths. Over the past fifty years, research in aircraft design and shaping has led to the prospect of low-noise supersonic flight. As part of its Quesst mission, NASA is building an experimental aircraft, the X-59, to demonstrate this capability. After completing flight test and design validation phases, NASA will field a national community testing campaign in order to collect data on how people perceive the sound from low-noise supersonic flight. The collected data will be provided to national and international regulators as they consider replacing the overland speed limit with a noise-based limit. This presentation provides an overview of the community test campaign, and identifies some of the key objectives, plans, and anticipated challenges.

X-59↗
NASA NTRS2010

Australian Soil Moisture Field Experiments in Support of Soil Moisture Satellite Observations

Large-scale field campaigns provide the critical fink between our understanding retrieval algorithms developed at the point scale, and algorithms suitable for satellite applications at vastly larger pixel scales. Retrievals of land parameters must deal with the substantial sub-pixel heterogeneity that is present in most regions. This is particularly the case for soil moisture remote sensing, because of the long microwave wavelengths (L-band) that are optimal. Yet, airborne L-band imagers have generally been large, heavy, and required heavy-lift aircraft resources that are expensive and difficult to schedule. Indeed, US soil moisture campaigns, have been constrained by these factors, and European campaigns have used non-imagers due to instrument and aircraft size constraints. Despite these factors, these campaigns established that large-scale soil moisture remote sensing was possible, laying the groundwork for satellite missions. Starting in 2005, a series of airborne field campaigns have been conducted in Australia: to improve our understanding of soil moisture remote sensing at large scales over heterogeneous areas. These field data have been used to test and refine retrieval algorithms for soil moisture satellite missions, and most recently with the launch of the European Space Agency's Soil Moisture Ocean Salinity (SMOS) mission, to provide validation measurements over a multi-pixel area. The campaigns to date have included a preparatory campaign in 2005, two National Airborne Field Experiments (NAFE), (2005 and 2006), two campaigns to the Simpson Desert (2008 and 2009), and one Australian Airborne Cal/val Experiment for SMOS (AACES), just concluded in the austral spring of 2010. The primary airborne sensor for each campaign has been the Polarimetric L-band Microwave Radiometer (PLMR), a 6-beam pushbroom imager that is small enough to be compatible with light aircraft, greatly facilitating the execution of the series of campaigns, and a key to their success. An L-band imaging radar is being added to the complement to provide simultaneous active-passive L-band observations, for algorithm development activities in support of NASA's upcoming Soil Moisture Active Passive (.S"M) mission. This paper will describe the campaigns, their objectives, their datasets, and some of the unique advantages of working with small/light sensors and aircraft. We will also review the main scientific findings, including improvements to the SMOS retrieval algorithm enabled by NAFE observations and the evaluation of the Simpson Desert as a calibration target for L-band satellite missions. Plans for upcoming campaigns will also be discussed.

Kim, Edward↗
DOE OSTI2024

Model-Based Sequential Design of Experiments for Pilot Testing of Novel Water-Lean CO2 Capture Solvent

Poster for the 2024 Fossil Energy and Carbon Management Meeting. It summarizes work done on process modeling and uncertainty quantification in preparation for the test campaign at the National Carbon Capture Center for a general audience. The poster includes sections detailing background on the EEMPA solvent, sequential design of experiments, process modeling (including results from the model), uncertainty quantification, and the goals of the test campaign.

Hedrick, Katherine↗
NASA NTRS1986

Scientific reasons for a network of ST radars and cooperative campaigns

Due to their capabilities of measuring wind profiles in the troposphere and stratosphere with good time and height resolution, whatever the weather conditions, stratosphere-troposphere (ST) radars are well adapted to carry out atmospheric research in many fields as well as to fulfill the meteorological forecasting needs. Examples are presented from previous and future national or international campaigns planned in France. The ST radars were used first by themselves with the adjunction of radiosonde data. Then networks were built and used to get horizontal parameters. It appears that ST radar networks should naturally be included in cooperative campaigns.

Petitdidier, M.↗