Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NUCLEAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Fracture toughness evaluations for spent nuclear fuel dry storage canister welds and spent nuclear fuel clad-pellet structures

Integrity of spent nuclear fuel (SNF) interim storage canisters is very important to the safety of the back-end nuclear fuel cycle. Stress corrosion cracking (SCC) potential of interim storage canister has been considered as a high priority. Because no post-weld heat treatment was required for forming these canisters, the high tensile residual stress existed within these canister welds. This can change the fracture resistance capacity significantly as well as increase SCC potential. Due to relative thin shell thickness of a canister weldment, the spiral notch torsion test (SNTT) method was used to estimate the canister weldment fracture toughness. SNTT was developed to measure the intrinsic fracture toughness of structural materials using small specimens. The SNTT method has been applied to a wide variety of structural materials, such as low-alloy steels, stainless steel, aluminum alloy, ceramics, concrete, and composites. The SNTT system operates by applying pure torsion to cylindrical specimens with a notch line that spirals around the specimen at a 45° pitch. In order to carry out pure torsion load mode, biaxial tension/torsion tester was developed accordingly to perform SNTT protocol. Moreover, applying fracture mechanics approach to SNF system reliability investigation is warranted due to the inherent flaws and hydride structures existed in a SNF system after nuclear reactor operation. However, none of the existing fracture toughness data deal with fuel cladding specific geometry or spent fuel material conditions, such as cladding structure with the pellet-inserts and the associated pellet clad mechanical interactions induced mixed-mode damage mechanisms. Thus, the development of an intrinsic fracture mechanics approach that is suitable for SNF materials is needed. Furthermore, due to thin wall and small dimension of clad tubing structure, the SNTT method was used to estimate the clad tubing structure fracture toughness. Fracture testing were performed on the received stainless steel canister weldment, most SNTT weld samples fracture initiation sites are at heat-affected zone (HAZ) regions. The estimated fracture toughness J Q ’ for the baseline SS304 steel is at 283 kJ/m². The estimated JQ’ for the SS304/308 weld and baseline metals are 148 kJ/m 2 and 459 kJ/m 2 , respectively. Out of cell fracture testing for spent fuel structure were carried out on the surrogate rods made of Zr-4 clad and alumina inserts, the estimated fracture toughness values for baseline Zr-4 cladding with alumina-pellet inserts are: (1) For SNTT samples with a short or medium crack length, between 5.4-mm and 8-mm, the estimate J IQ upon fracture initiation for the baseline Zr-4 cladding is at 50 kJ/m 2 with 2-sigma uncertainty of 3.26 kJ/m 2 , and the associated K IQ is at 67.46 MPa$\sqrt{m}$; and (2) For SNTT samples with a long crack length, around 13-mm, the crack initialization is deviated from that of the Mode-I tensile fracture and appears to be a mixed-mode fracture of Mode I - tensile stress and Mode III - out of plane shear stress; the estimated J MQ is at 18.9 kJ/m 2 , the associated K MQ is at 41.4 MPa$\sqrt{m}$.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Computational Workflows for Uncertainty-Quantified Nuclear Reactions: From Nuclear Theory Inputs to Astrophysical Reaction Rates

Reactions on unstable nuclei, particularly those on the neutron-rich side of stability, are important for both fundamental and applied physics. For fundamental science, the most prevalent use case is astrophysi cal nucleosynthesis by rapid neutron capture—the r-process—by which heavy nuclei are formed in extreme astrophysical environments, such as in supernovae and neutron star mergers; see, e.g., Refs. [1–3]. For ap plications, these processes are relevant for the interpretation of radiochemical data from historic nuclear tests, which contribute to our ability to certify the enduring stockpile in the absence of nuclear testing [4]; see Ref. [5] for a broader discussion of applications. However, reaction cross sections involving unsta ble species are generally poorly understood, for the simple reason that useful data become scarce as one moves away from stability. While there are avenues for improving the amount and quality of data for these species [6], one is fundamentally reliant on nuclear theory to make progress on these fields of study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Intern Poster Session 08/13: Autonomous Nuclear Robotics: Applications in nuclear waste inspection and hot cell experiments

The nuclear industry is experiencing renewed interest in autonomous robotics, yet most deployed systems remain teleoperated with limited autonomy. This work presents two contributions toward fully autonomous nuclear robotic systems: autonomous waste inspection at the Hanford Site and an autonomous hot cell laboratory framework. Inspections of Hanford's underground waste storage tanks are performed manually at significant cost and personnel exposure. We developed a reinforcement-learning (RL) training pipeline for a custom-built inspection arm. In parallel, we are designing an autonomous laboratory framework for post-irradiation examination in hot cells at the Specimen Preparation Laboratory (SPL) that integrates computer vision, task and motion planning, hardware execution, and operator-in-the-loop control. These systems demonstrate a path toward safer, more efficient nuclear operations by reducing human exposure while maintaining rigorous human oversight at critical decision points.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Nuclear Power Plant Infrastructure Evaluations for Removal of Spent Nuclear Fuel

This report provides evaluations of the NPP site infrastructure and near-site transportation infrastructure for removing spent nuclear from 16 (NPP) sites. The material to be removed from the NPP sites includes both the spent nuclear fuel (SNF) and the greater-than-Class C low level radioactive waste (GTCC waste) that is stored, or will be stored, at the sites.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Effects of nuclear structure and quantum interference on diffractive vector meson production in ultra-peripheral nuclear collisions

Here we study diffractive vector meson production in ultra-peripheral collisions (UPCs) of heavy nuclei, utilizing a theoretical framework based on the Color Glass Condensate (CGC) formalism. We focus on Au + Au, U + U, Ru + Ru, Zr + Zr, and Pb + Pb collisions, examining the transverse momentum dependence of vector meson production cross-sections and co s(2ΔΦ)asymmetries in the decay product distributions to explore the role of nuclear geometry. The angular modulation is due to the linear polarization of the incoming photons and quantum interference effects. We extract nuclear radii and find them to be consistent with experimental data from the STAR collaboration. The amplitudes of the cos(2ΔΦ)modulation in the cross-section and the extracted radii depend on the nuclear geometry. This dependence is dominated by the geometry-dependent variation of the minimum impact parameter required for ultra-peripheral collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Gamma-ray spectrometry as a tool for exploring archaeological nuclear facilities: a case study from the Nevada Test Site Nuclear Rocket Development Station

Since its first demonstration in the early 2000s, the exploration of gamma-ray spectrometry (GRS) applications as a geophysical tool in archaeology remains nascent. While intentional neutron activation, which requires a gamma-ray analysis, has seen increasing use as a geoforensics technique in archaeology, little or no research has been published concerning the possibility of GRS as an industrial archaeological tool for use in exploring nuclear sites or facilities where neutron activation and surface contamination may have already occurred. Consequently, the use of GRS as a geophysical tool for the archaeological investigation of abandoned or decommissioned nuclear facilities is proposed, demonstrated, and discussed using a case study from the Nevada Test Site Nuclear Rocket Development Station.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Chicago Pile-1 paved the way for nuclear science and a lab in Los Alamos First self-sustaining nuclear chain reaction was nearly 80 years ago

On a bitter-cold winter day, 43 scientists gathered at an abandoned squash court at the University of Chicago where they would ultimately enable a secret lab in Los Alamos to change the world just years later. It was December 2, 1942. The group, led by Italian physicist and Nobel laureate Enrico Fermi, stacked graphite bricks, piling 57 layers that totaled more than 770,000 pounds. Later named Chicago Pile-1, their goal was to create the world’s first self-sustaining, controlled nuclear chain reaction. Inside the approximately 20-feet-tall pile were smaller blocks of uranium and control rods that, when removed, would cause the reaction to go critical – meaning create a nuclear chain reaction. It was roughly $1 million worth of materials, equivalent to nearly $16 million today, and a concept that a nuclear chain reaction would allow the weaponization of the atom. “Its success would be the crucial proof needed to know it would be possible to create an atomic bomb,” said LANL Historian Roger Meade (C-NR). “This was the precursor to the Lab we have today, nearly 80 years later.”

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A highly-enriched 244 Pu reference material for nuclear safeguards and nuclear forensics measurements

A highly-enriched 244 Pu isotope dilution reference material has been prepared and characterized for metrologically traceable measurements of very small quantities of plutonium. The amount of plutonium in samples associated with nuclear safeguards and nuclear forensic measurements can be significantly less than 1 ng. Accordingly, the ability to quantify the amount and isotopic composition of plutonium from a single mass-spectrometric analysis is particularly desirable. The highly-enriched 244 Pu reference material, described here, will minimize the magnitude of spike corrections necessary to obtain accurate information on plutonium isotopic composition from isotope dilution measurements.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

Nuclear Energy for Economy-wide Net Zero Solutions: Advancing Nuclear-Hydrogen Production

This presentation was prepared for the Canadian Standards Association Virtual Seminar on Hydrogen Production using Nuclear Energy, held on February 15, 2022. The presentation introduces the US DOE program on Integrated Energy Systems and provides an overview of the Light Water Reactor Sustainability projects to demonstrate hydrogen production at operating nuclear plants in the US.

08 HYDROGEN↗
DOE OSTI2025

Determining hexavalent chromium transport properties in alkaline nuclear waste using nuclear magnetic resonance spectroscopy

This study focuses on the transport properties of hexavalent chromium, specifically the chromate anion, to improve predictive models and environmental remediation strategies for Cr(VI) migration. Using 53 Cr Nuclear Magnetic Resonance (NMR) spectroscopy, the research quantifies chromate in multicomponent electrolytes replicating nuclear waste conditions at the Hanford Site in Washington State. The consistency of the 53 Cr NMR signal integral with chromate concentration, despite varying matrix compositions, establishes it as a reliable concentration indicator. The transport properties of chromate in an alkaline solution were assessed using relaxation-based measurements via saturation recovery and Carr-Purcell-Meiboom-Gill experiments, determining spin-lattice and spin-spin relaxation times. These measurements, combined with the Bloembergen-Purcell-Pound equation, helped estimate the rotational correlation time and the 53 Cr self-diffusion coefficient using Stokes-Einstein-Debye and Stokes-Einstein equations. Direct measurements were obtained through pulsed field gradient stimulated echo 53 Cr NMR spectroscopy. Monte Carlo simulations further estimated uncertainty propagation. The results enhance comprehension of chromate transport and highlight prospects for identifying transport properties of NMR-active nuclei, traditionally considered unreachable.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Update of the Nuclear Criticality Slide Rule Calculations: Plutonium systems – Delayed Fission Gamma

IRSN (France), LLNL (USA) and ORNL (USA) began a long-term collaboration effort in 2015 to update the nuclear criticality Slide Rule for the emergency response to a nuclear criticality accident. The Slide Rule permits the estimation of neutron and gamma dose rates and integrated doses based upon estimated fission yields, as a function of distance from the fission source, and time after criticality accidents for different critical systems. This paper presents results from the fourth phase of the current update of the Slide Rule project, in which delayed fission-product gamma (DFG) dose rates of unreflected plutonium critical systems were compared by several modern 3D radiation transport codes (MCNP, COG, SCALE), using updated flux-to-dose conversion factors. Dose rates are calculated for fissile material at five moderation ratios (H/Pu), at 1 m above the ground as a function of distance (between 30 cm and 1,200 m) from the external surface of the source to the center of the detector, and for periods between 1 s and 1,000 min after the critical instantaneous event. Further efforts have been devoted to the determination of the delayed gamma source, by comparing the time-dependent energy spectra obtained from several methods. Overall, DFG dose rates calculated by each participant led to consistent results. Extra effort is under way to identify the cause of the remaining differences, by comparing precisely the gamma source, and particularly nuclides inventories.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Nuclear Reaction Data Evaluations for Nuclear Applications Physics and modeling [Slides]

This presentation provides an evaluation workflow scheme for the project. It also discusses nuclear data libraries, including an overview of worldwide nuclear data libraries and current funding agencies. The presentation also discusses the theoretical framework commonly used in the evaluated work, including the R-matrix theory (≈ up to a few keVs for heavy nuclei) as well as pre-equilibrium (PE) and Hauser-Feshbach (HF) theory (⪆1 MeV for medium/heavy nuclei). Inclusion of experimental effects are also discussed. Examples of evaluated work, including theory, experiments, and applications are discussed, specifically n+ 28,29,30 Si evaluation (direct capture component), n+ 53 Cr evaluation (strong multiple scattering effects), n+ 239 Pu(n,γf) reaction (fluctuations in neutron multiplicities), and α+ 17,18 O evaluations (emerging neutron spectra).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

International Nuclear Security Nuclear Material Accounting and Control Kit Participant Guides

You work at a facility that stores large amounts of nuclear material in varying containerizations. Management has just approved the establishment of a tamper indicating device program in order to cut down on the effort required to conduct inventories, and to enhance overall control of nuclear materials within the site boundary. You have been assigned, along with your colleagues, to conduct an initial assessment to determine the ideal TID types to be used at your facility. You will apply TIDs to a variety of apparatuses that are representative of the closure mechanisms on different containers and entry points to rooms and vaults onsite.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2026

United States Nuclear Power Reactor Used Nuclear Fuel Database and Applications

The Unified Database (UDB) within STANDARDS serves as the foundational data infrastructure for managing the United States' spent nuclear fuel inventory of 315,111 discharged assemblies totaling 91,036 metric tons of heavy metal. The database organizes this complex inventory through over 200 interconnected tables structured into eight primary attribute categories, supporting integrated analyses across storage, transportation, and disposal domains. Data enters the UDB through the GC-859 Nuclear Fuel Data Survey, which transitioned to web-based collection in 2023, improving data quality through real-time validation. The UDB enables automated generation of input files for nuclear safety analyses, reducing preparation time from weeks to hours while maintaining traceability. Applications include national inventory reporting, Certificate of Compliance assessments, and facility optimization. The three-tier distribution model balances accessibility with security requirements for federal agencies, national laboratories, and research organizations. The UDB provides essential data infrastructure as spent fuel management transitions from site-specific to integrated national campaigns.

Stefanovic, Peter↗
DOE OSTI2024

Nuclear suppression of coherent J / ψ photoproduction in heavy-ion ultraperipheral collisions and leading twist nuclear shadowing

We determine the nuclear suppression factor S Pb ( x ) , where x = M J / ψ 2 / W γ p 2 with M J / ψ the J / ψ mass and W γ p the photon-nucleon energy, for the cross section of coherent J / ψ photoproduction in heavy-ion ultraperipheral collisions at the Large Hadron Collider and Relativistic Heavy Ion Collider by performing the χ 2 fit to all available data on the cross section d σ A A → J / ψ A A / d y as a function of the J / ψ rapidity y and the photoproduction cross section σ γ A → J / ψ A ( W γ p ) as a function of W γ p . We find that while the d σ A A → J / ψ A A / d y data alone constrain S Pb ( x ) for x ≥ 10 − 3 , the combined d σ A A → J / ψ A A / d y and σ γ A → J / ψ A ( W γ p ) data allow us to determine S Pb ( x ) in the wide interval 10 − 5 < x < 0.05 . In particular, the data favor S Pb ( x ) , which decreases with a decrease of x in the 10 − 4 < x < 0.01 interval and can be both decreasing or constant for x < 10 − 4 . Identifying S Pb ( x ) with the ratio of the gluon distributions in Pb and the proton R g ( x , Q 0 2 ) = g A ( x , Q 0 2 ) / [ A g p ( x , Q 0 2 ) ] , we demonstrate that the leading twist approximation for nuclear shadowing provides a good description of all the data on d σ A A → J / ψ A A / d y and σ γ A → J / ψ A ( W γ p ) as well as on the experimental values for S Pb ( x ) derived from σ γ A → J / ψ A ( W γ p ) . We also show that modern nuclear parton distributions reasonably reproduce S Pb ( x ) as well. Published by the American Physical Society 2024

Guzey, V. (ORCID:0000000223938507)↗