Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NP stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

89 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Two-Electron–Two-Proton Transfer from Colloidal ZnO and TiO 2 Nanoparticles to Molecular Substrates

Transfers of multiple electrons and protons are challenging yet central to many energy-conversion processes and other chemical and biochemical reactions. Semiconducting oxides can hold multiple redox equivalents. This study describes the 2e – /2H + transfer reactivity of photo-reduced ZnO and TiO 2 nanoparticle (NP) colloids with molecular 2e – /2H + acceptors, to form new O-H, N-H, and C-H bonds. The reaction stoichi-ometries were monitored by NMR and optical spectroscopies. Faster 2e – /2H + transfer rates were observed for substrates forming O-H or N-H bonds, presumably due to initial hydrogen bonding at the oxide surface. Chemically reduced ZnO NPs stabilized by Na + or Ca 2+ also engage in 2e – /2H + transfer reactivity, showing that protons transferred in these processes are inherent to the oxide nanoparticles and do not exclusively stem from photoreduction. Furthermore, these results highlight the potential of ZnO and TiO 2 for multiple proton-coupled electron transfer (PCET) reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Reconstruction and Dissolution of Copper Catalysts during Electrocatalytic Nitrate Reduction

Copper-based electrocatalysts are widely explored for electrochemical nitrate remediation, yet their stability under operating conditions remains poorly understood. While nanoscale and subnanoscale Cu motifs are known to restructure during the nitrate reduction reaction (NO 3 RR), how these transformations translate into irreversible material loss remains unclear. Here, we quantify Cu dissolution during NO 3 RR as a function of catalyst architecture and electrolyte chemistry using two model systems: single-atom Cu (Cu 1 ) and Cu nanoparticles (Cu NP ). Time-resolved leaching measurements, integrated with in situ X-ray absorption spectroscopy (XAS), reveal measurable Cu loss for both catalysts during NO 3 RR. Dissolution is concentrated at the initiation of electrolysis, coinciding with rapid restructuring, and depends strongly on morphology, with Cu NP consistently exhibiting greater Cu loss than Cu 1 . In situ XAS reveals that Cu 1 forms transient metallic clusters under reduction that largely redisperse upon returning to open-circuit voltage, whereas Cu NP undergoes reduction of an oxidized surface layer accompanied by sustained Cu loss during electrolysis. Notably, the presence of nitrate significantly intensifies restructuring and Cu loss, highlighting the critical role of electrolyte composition. Furthermore, these findings establish a direct link between electrochemical restructuring and Cu dissolution, unveiling electrolyte-dependent interactions as key determinants of catalyst durability in electrochemical nitrate conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Low Thermal Conductivity and Diffusivity at High Temperatures Using Stable High–Entropy Spinel Oxide Nanoparticles

The realization of low thermal conductivity at high temperatures (0.11 W m –1 K –1 800 °C) in ambient air in a porous solid thermal insulation material, using stable packed nanoparticles of high-entropy spinel oxide with 8 cations (HESO-8 NPs) with a relatively high packing density of ≈50%, is reported. The high-density HESO-8 NP pellets possess around 1000-fold lower thermal diffusivity than that of air, resulting in much slower heat propagation when subjected to a transient heat flux. The low thermal conductivity and diffusivity are realized by suppressing all three modes of heat transfer, namely solid conduction, gas conduction, and thermal radiation, via stable nanoconstriction and infrared-absorbing nature of the HESO-8 NPs, which are enabled by remarkable microstructural stability against coarsening at high temperatures due to the high entropy. Furthermore, this work can elucidate the design of the next-generation high-temperature thermal insulation materials using high-entropy ceramic nanostructures.

thermal insulation↗
DOE OSTI2023

Strategies for regeneration of Pt-alloy catalysts supported on silica for propane dehydrogenation

Catalyst stability, resistance to deactivation, and regeneration remain a challenge for high temperature reaction processes. For Pt alloys used in propane dehydrogenation (PDH), the primary pathways of catalyst deactivation include coke formation and metal nanoparticle sintering over time. Recent work shows that silica-supported catalysts provide excellent selectivity for this reaction, but the regenerability of silica-supported catalysts has not been established. In this work, we study a series of Pt alloys, including PtMn, PtZn, and PtSn, for the PDH reaction at 550 °C and 600 °C, and we subject the catalysts to regeneration over multiple cycles. While oxidation in air restores the reactivity completely with minimal catalyst sintering, it is surprising to find that these catalysts can also be regenerated in pure hydrogen. Here we explore the types of coke formed on these catalysts using in situ temperature programmed oxidation (TPO). Two types of coke are found: one on the metallic NP surface, and a second on the silica support. Our work shows that treatment in hydrogen causes redistribution of the coke between the metal and support, which can restore most catalytic activity lost during a reaction run. Finally, periodic introduction of H 2 during a reaction cycle may constitute an unexplored strategy for extending the lifetime of PDH catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unusual Metal–Organic Framework Topology and Radiation Resistance through Neptunyl Coordination Chemistry

A Np(V) neptunyl metal–organic framework (MOF) with rod-shaped secondary building units was synthesized, characterized, and irradiated with γ rays. Furthermore, single-crystal X-ray diffraction data revealed an anionic framework containing infinite helical chains of actinyl–actinyl interaction (AAI)-connected neptunyl ions linked together through tetratopic tetrahedral organic ligands (NSM). NSM exhibits an unprecedented net, demonstrating that AAIs may be exploited to give new MOFs and new topologies. To probe its radiation stability, we undertook the first irradiation study of a transuranic MOF and its organic linker building block using high doses of γ rays. Diffraction and spectroscopic data demonstrated that the radiation resistance of NSM is greater than that of its linker building block alone. Approximately 6 MGy of irradiation begins to induce notable changes in the long- and short-range order of the framework, whereas 3 MGy of irradiation induces total X-ray amorphization and changes in the local vibrational bands of the linker building block.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Technical Guidance on Use of the Linseis Vertical Dilatometer L75

Linseis vertical Dilatometer L75 thermal expansion equipment is a complete system which can be used for measuring change of the absolute length of a sample, determination of the thermal expansion coefficient (CTE), shrinkage, and sintering. The 238 Pu Supply Program is interested in re-establishing the capability to determine CTE and measuring the change of the absolute length of various 237 Np Al/cermet samples during heating. The change in length of the measured sample is recorded using a highly sensitive Linear Variable Differential Transformer (LVDT). The dilatometer is user-friendly and simple to operate which will allow technicians to be trained easily on its use. This equipment was designed to be used specifically for ceramics. It has a highly vacuum tight push rod dilatometer, a high-resolution inductive transducer using innovative and comprehensive temperature controls which provide excellent performance as a measurement system yielding high accuracy, reproducibility, and long-term stability.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Assessing subtle variations in the actinyl oxo reactivity through characterization of neptunyl complexes. Final Report

Formation of the actinyl cation, [An(V,VI)O 2 ] n+ (n = 1,2), imparts unique chemical properties to the lighter actinide elements (U, Np, and Pu) that has yet to be fully understood. The axial O atoms (oxo) of the [An(VI)O 2 ] 2+ are considered weak Lewis bases that exhibit only meager interact with other metal cations and regarded as poor hydrogen acceptors for nearby water molecules. Oxo atoms of [An(V)O 2 ] + should engage in stronger bonding interactions due to a higher degree of Lewis basicity, but the actual interactions have yet to be fully explored. Intermolecular interactions can impact radionuclide separations, corrosion of spent fuel, and mobility of actinides in environmental systems; there is, therefore, a critical need to understand how the subtle difference in electronic properties of the An(V) and An(VI) metal center influence actinyl chemistry. The objective of this proposal was to determine the chemical components that influence the intermolecular interactions occurring between neptunyl ([Np(V)O 2 ] + and [Np(VI)O 2 ] 2+ ) cations and neighboring species. My overall hypothesis was that the intermolecular attraction that occurs between the neptunyl oxo atoms and neighboring species (H atoms, low-valent cations, actinyl cations) is primarily controlled by the electronic properties of the actinyl cation, but can be further influenced by the electron donating properties of the equatorial ligands. The hypothesis was tested through the following research objectives: (1) Determine the fundamental differences in H-bonding between Np(V)O 2+ and Np(VI)O 2 2+ and neighboring donor molecules; (2) Identify the major differences in bonding between low-valence metal cations and neptunyl oxo groups, and (3) Assess the impact of the equatorial ligand on the formation of cation-cation interactions within molecular species. Major outcomes of the research include: (1) More precisely identifying oxo interactions (actinyl-cation; actinyl-actinyl, actinyl-hydrogen) and the factors that impact the vibrational modes for actinyl cation; (2) Identification of H-bonding modes for the [An(V,VI)O 2 ] n+ (n = 1,2), with direct H-bonding interactions to the oxo group of the Np(V)O 2+ cation more prevalent than in hexavalent species and recognition of the importance of H-bonding networks, that can impart bond asymmetry and activation of vibrational modes with the actinyl moiety; (3) Delineation of the importance of charge density for engaging the cation-oxo interaction for both pentavalent and hexavalent species; (4) Determining the importance of sterics and ligand binding in formation of specific actinyl-actinyl interactions and the resulting vibrational modes associated with this bonding motify and (5) Understanding how the functionalization of the ligand can impact redox stability of neptunyl cations. Deliverables from this work include 11 peer-reviewed manuscripts and 13 (including six by graduate students) oral/poster presentations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Enhanced resistance to decay of imprinted nanopatterns in thin films by bare nanoparticles compared to polymer-grafted nanoparticles

We extend a previous study on the influence of nanoparticles on the decay of nanoimprinted polymer film patterns to compare the effects of “bare” silica (SiO 2 ) nanoparticles and SiO 2 nanoparticles with grafted polymer layers having the same chemical composition as the polymer matrix. This method involves nanoimprinting substrate-supported polymer films using a pattern replicated from a digital versatile disc (DVD), and then annealing the patterned polymer nanocomposite films at elevated temperatures to follow the decay of the topographic surface pattern with time by atomic force microscopy imaging after quenching. We quantified the relaxation of the pattern height (“slumping”) and determined the relaxation time τ for this pattern decay process as a function of nanoparticle filler type and concentration to determine how nanoparticle additives influence relative film stability. Attractive interactions between the bare nanoparticles and the polymer matrix significantly enhance the thermal resilience of the nanopatterns to decay, compared to those of the particle brushes, wherein the particle core interactions are screened from the matrix via the brush layer. A novel aspect of this method is that it readily lends itself to in situ film relaxation measurements in a manufacturing context. We observe that the relaxation time of the pattern relaxation exhibits entropy–enthalpy compensation in the free energy parameters governing the pattern relaxation process as a function of temperature, irrespective of the NP system used, consistent with our previous experimental and computational studies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Interactive effects of salinity, redox, and colloids on greenhouse gas production and carbon mobility in coastal wetland soils

Coastal wetlands, including freshwater systems near large lakes, rapidly bury carbon, but less is known about how they transport carbon either to marine and lake environments or to the atmosphere as greenhouse gases (GHGs) such as carbon dioxide and methane. This study examines how GHG production and organic matter (OM) mobility in coastal wetland soils vary with the availability of oxygen and other terminal electron acceptors. We also evaluated how OM and redox-sensitive species varied across different size fractions: particulates (0.45–1μm), fine colloids (0.1–0.45μm), and nano particulates plus truly soluble (<0.1μm; NP+S) during 21-day aerobic and anaerobic slurry incubations. Soils were collected from the center of a freshwater coastal wetland (FW-C) in Lake Erie, the upland-wetland edge of the same wetland (FW-E), and the center of a saline coastal wetland (SW-C) in the Pacific Northwest, USA. Anaerobic methane production for FW-E soils were 47 and 27,537 times greater than FW-C and SW-C soils, respectively. High Fe 2+ and dissolved sulfate concentrations in FW-C and SW-C soils suggest that iron and/or sulfate reduction inhibited methanogenesis. Aerobic CO 2 production was highest for both freshwater soils, which had a higher proportion of OM in the NP+S fraction (64±28% and 70±10% for FW-C and FW-E, respectively) and organic C:N ratios reflective of microbial detritus (5.3±5.3 and 5.3±7.0 for FW-E and FW-C, respectively) compared to SW-C, which had a higher fraction of particulate (58±9%) and fine colloidal (19±7%) OM and organic C:N ratios reflective of vegetation detritus (11.4 ± 1.7). The variability in GHG production and shifts in OM size fractionation and composition observed across freshwater and saline soils collected within individual and across different sites reinforce the high spatial variability in the processes controlling OM stability, mobility, and bioavailability in coastal wetland soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Low-Temperature Non-Oxidative Coupling of Methane on Atomically Dispersed Titanium–Aluminum–Boron Nanopowder

Nonoxidative coupling of methane represents a long-standing challenge in heterogeneous catalysis, as it requires activation of the carbon–hydrogen (C–H) bond, controlled carbon–carbon (C–C) bond formation, and effective hydrogen management without relying on oxidants. Here, we report a low-temperature C–H activation and nonoxidative C–C coupling of methane over atomically dispersed titanium–aluminum–boron nanopowder (Ti–Al–B NP) utilizing a catalytic microreactor coupled to synchrotron single-photon photoionization reflectron time-of-flight mass spectrometry. The soft-ionization, in situ probing method detects the nascent reaction products and radical intermediates under operando conditions, including methyl radical, C2 hydrocarbons, and molecular hydrogen. Methane activation is initiated at 800 K, approximately 700 K below the gas-phase decomposition threshold, leading predominantly to ethylene formation with selectivity reaching up to 78% among the C–C coupled products. Electronic structure calculations on model Ti–Al–B clusters elucidate a cooperative catalytic mechanism in which titanium enables methane adsorption and C–H activation, boron acts as a reversible hydrogen reservoir, and aluminum stabilizes methylene intermediates, thereby facilitating selective C–C coupling and dehydrogenation. These findings establish a distinct catalyst architecture for nonoxidative methane coupling based on earth abundant elements alternative to expensive platinum and other noble metal-containing conventional catalysts and provide molecular-level design principles for controlling dehydrogenation and subsequent C–C bond formation in challenging light alkane conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Atomically dispersed single iron sites for promoting Pt and Pt 3 Co fuel cell catalysts: performance and durability improvements

Significantly reducing platinum group metal (PGM) loading while improving catalytic performance and durability is critical to accelerating proton-exchange membrane fuel cells (PEMFCs) for transportation. In this study, we report an effective strategy to boost PGM catalysts through integrating PGM-free atomically-dispersed single metal active sites in the carbon support toward the cathode oxygen reduction reaction (ORR). We achieved uniform and fine Pt nanoparticle (NP) (~2 nm) dispersion on an already highly ORR-active FeN 4 site-rich carbon (FeN 4 –C). Furthermore, we developed an effective approach to preparing a well-dispersed and highly ordered L1 2 Pt 3 Co intermetallic nanoparticle catalyst on the FeN 4 –C support. DFT calculations predicted a synergistic interaction between Pt clusters and surrounding FeN 4 sites through weakening O 2 adsorption by 0.15 eV on Pt sites and reducing activation energy to break O–O bonds, thereby enhancing the intrinsic activity of Pt. Experimentally, we verified the synergistic effect between Pt or Pt 3 Co NPs and FeN 4 sites, leading to significantly enhanced ORR activity and stability. Especially in a membrane electrode assembly (MEA) with a low cathode Pt loading (0.1 mg Pt cm –2 ), the Pt/FeN 4 –C catalyst achieved a mass activity of 0.451 A mg Pt –1 and retained 80% of the initial values after 30 000 voltage cycles (0.60 to 0.95 V), exceeding DOE 2020 targets. Furthermore, the Pt 3 Co/FeN 4 catalyst achieved significantly enhanced performance and durability concerning initial mass activity (0.72 A mg Pt –1 ), power density (824 mW cm –2 at 0.67 V), and stability (23 mV loss at 1.0 A cm –2 ). The approach to exploring the synergy between PGM and PGM-free Fe–N–C catalysts provides a new direction to design advanced catalysts for hydrogen fuel cells and various electrocatalysis processes.

25 ENERGY STORAGE↗
DOE OSTI2023

Rapid Polyolefin Plastic Hydrogenolysis Mediated by Single-Site Heterogeneous Electrophilic/Cationic Organo-group IV Catalysts

A homologous series of cationic electrophilic group IV metal hydrides (M = Ti, Zr, Hf) created by chemisorption of the corresponding MNp 4 precursors on highly Brønsted acidic sulfated alumina (AlS) to yield loosely coordinated surface AlS/MNp 2 (Np = neopentyl) species are systematically characterized by ICP, EXAFS/XANES, DRIFTS, and solid-state high-resolution multidimensional NMR spectroscopy (SSNMR), as well as by energy span DFT computation. With effective stirring, these complexes readily undergo reaction with H 2 to yield AlS/M(alkyl)H species, which are highly active for the hydrogenolysis of diverse commercial polyethylenes, α-olefin-ethylene copolymers, isotactic polypropylene, and postconsumer polyolefins including high-density polyethylenes, yielding medium and small linear and branched hydrocarbons at turnover frequencies as high as 36,300 h –1 at 200 °C/17 atm H 2 for M = Zr. For given polyolefin and reaction conditions, turnover frequencies scale approximately as M = Zr > Hf > Ti, whereas catalyst thermal stability scales approximately as M = Hf ≈ Zr > Ti, and these trends are qualitatively understandable from the DFT analysis. These catalytic results reveal that the AlS/Hf(R)H-mediated hydrogenolysis favors wax-like and liquid products, whereas the AlS/Zr(R)H-mediated hydrogenolysis can be tuned between gases and liquids. Finally, DFT analysis identifies β-alkyl elimination as the turnover-limiting C–C scission process, which is particularly facile in these cationic d 0 complexes but not so in the neutrally charged analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Plutonium mobilization from contaminated estuarine sediments, Esk Estuary (UK)

Since 1952, liquid radioactive effluent containing 238-242 Pu, 241 Am, 237 Np, 137 Cs, and 99 Tc has been released with authorization from the Sellafield nuclear complex (UK) into the Irish Sea. This represents the largest source of plutonium (Pu) discharged in all western Europe, with 276 kg having been released. In the Eastern Irish Sea, the majority of the transuranic activity has settled into an area of sediments (Mudpatch) located off the Cumbrian coast. Radionuclides from the Mudpatch have been re-dispersed via particulate transport in fine-grained estuarine and intertidal sediments to the North-East Irish Sea, including the intertidal saltmarsh located at the mouth of the Esk Estuary. Saltmarshes are highly dynamic systems which are vulnerable to external agents (sea level change, erosion, sediment supply, and freshwater inputs), and their stability remains uncertain under current sea level rise projections and possible increases in storm activity. In this work, we examined factors affecting Pu mobility in contaminated sediments collected from the Esk Estuary by conducting leaching experiments under both anoxic and oxic conditions. Here, leaching experiments were conducted over a 9-month period and were periodically sampled to determine solution phase Pu via multicollector-inductively coupled plasma-mass spectrometry (MC-ICP-MS), and to measure redox indicators (Eh, pH and extractable Fe(II)). Microbial community composition was also characterized in the sediments, and at the beginning and end of the anoxic/oxic experiments. Results show that: 1) Pu leaching is about three times greater in solutions leached under anoxic conditions compared to oxic conditions, 2) the sediment slurry microbial communities shift as conditions change from anoxic to oxic, 3) Pu leaching is enhanced in the shallow sediments (0–10 cm depth), and 4) the magnitude of Pu leached from sediments is not correlated with total Pu, indicating that the biogeochemistry of sediment-associated Pu is spatially heterogeneous. These findings provide constraints on the stability of redox sensitive Pu in biogeochemically dynamic/transient environments on a timescale of months and suggests that anoxic conditions can enhance Pu mobility in estuarine systems.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Solid state 59 Co NMR study of a Np(VII) compound

Np(VII) compounds with [Co(NH 3 ) 6 ] 3+ cations were synthesized and structurally examined using powder X-ray diffraction. Multiple phases were observed, consisting of octahedral [Co(NH 3 ) 6 ] 3+ cations, discrete tetragonal bipyramidal [NpO 4 (OH) 2 ] 3− anions, and waters of hydration. Electric field gradient tensors at Co sites were measured by solid state 59 Co nuclear magnetic resonance (NMR) spectroscopy and compared with theoretical calculations. The relative contributions of the chemical shift and electric field tensors to the NMR lineshape were determined by recording spectra at field strengths of 7.04 and 11.74 Tesla. Further, the evolution of structure and morphology as a function of sample age and the effects on NMR spectral parameters has also been investigated. These results demonstrate the use of NMR at multiple fields to expand understanding of the stability and electronic structure of high valent neptunium compounds.

heptavalent neptunium↗
DOE OSTI2026

Transient Triamidoamine Neptunium(V)–Mono(Imido) Complexes: C–H Activations and Hydrogen Atom Transfer Driven by Effective Nuclear Charge

Metal-mono(imido) linkages have been known for seven decades, and they are found in transition metal, main group, lanthanide, thorium, and uranium complexes. However, transuranium-mono(imido) complexes remain unknown in any scenario. Here, we present evidence for transient neptunium(V)–mono(imido) complexes. Treatment of [Np III (Tren TIPS )] (1, Tren TIPS = {N(CH 2 CH 2 NSiPr i 3 ) 3 } 3– ) with N 3 R (R = SiMe 3 ; 1-adamantyl, Ad) results in N 2 evolution and dark purple solutions consistent with the formation of [Np V (Tren TIPS )(NR)] (3NpNR). However, solutions of 3NpNR rapidly turn orange, where for R = SiMe 3 the isolated 1:1 products are [Np IV (Tren TIPS ){N(H)SiMe 3 }] (4a) and [Np IV (Tren TIPS-2H ){N(H)SiMe 3 }] (4b, Tren TIPS-2H = {N(CH 2 CH 2 NS i Pri 3 ) 2 (NCH 2 CH 2 NSiPr i 2 C[Me]=CH 2 )} 3– ). The latter contains a dehydrogenated-Pr i vinyl functionality accounting for the source of the two amido H atoms. The reaction for R = Ad proceeds similarly, but only [Np IV (Tren TIPS ){N(H)Ad}] (5a) could be unequivocally confirmed, though its isolation suggests generality of the imido-to-amido functional group transformation. Complexes 4a/4b exhibit slow relaxation of their magnetization, adding to the small number of transuranium single ion magnets. Experimental and computational analysis suggests that the amido products are formed by C–H activation and two sequential hydrogen atom transfer reactions involving a three-step proton-coupled electron-transfer sequence of H • radical abstraction, electron transfer, then another H • radical abstraction step. In contrast to transient 3NpNR, the 5f 2 uranium(IV)-imido complex [K(2.2.2-cryptand)][U IV (Tren TIPS )(NSiMe 3 )] (8UNSiMe 3 ) is robust, even in boiling THF, suggesting the transience of 5f 2 3NpNR is not due to the 5f n -count but the increased effective nuclear charge of neptunium vs uranium. This work highlights divergence of uranium- and neptunium-imido stabilities, emphasizing that the latter is an inherently challenging synthetic target.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Non–linear bonding trends in maleonitrile-1,2–dithiolate complexes of the transuranium actinides

The trivalent actinides are produced in the nuclear fuel cycle during power production and provide the largest long-term radiation dose in used nuclear fuel. It is ideal for these elements to be removed from used nuclear fuel for disposal and a necessity for fuel recycling. A key challenge to this is the similarity of chemical behavior of the trivalent actinides to the lanthanides that are also present as fission products in used fuel. Thus far, some of the most effective separations of actinides from lanthanides utilise chelating agents containing sulfur moieties such as dithiophosphinates that selectively bind to actinide ions because of a greater bond covalency relative to lanthanide ions. Typically, greater differences between actinide and lanthanide ions are observable the more ligands and chelators bonds have a covalent character. Here, a series of complexes of the trivalent actinides Np(III) through Cf(III) (excluding Bk(III)) with maleonitrile-1,2-dithiolate (mnt 2– ) are synthesized along with their lanthanide counterparts (La(III) – Nd(III), Sm(III) – Gd(III), Dy(III)), in order to characterize the nature of chemical bonds with these metal ions and a polarizable, non-innocent, sulfur-donor ligand. The metal-sulfur bonds in these complexes trend shorter than measured for lanthanides with equivalent ionic radii. However, particularly large deviations are observed in the neptunium and plutonium complexes in both structure and bonding, resulting in a nonlinear bond length trendline for the actinide series. Density Functional Theory (DFT) calculations with Quantum Theory of Atoms in Molecules (QTAIM) and Natural Bond Order (NBO) analyses indicate that for the neptunium and plutonium complexes, the presence of increased 5f-orbital participation, energy degeneracy of the metal and ligand orbitals, and the structure packing result in shortened M–S bonds. The stabilization of the energy of the 5f-orbitals and the decrease in f-contribution to bonding orbitals in the later actinides results in structural properties more similar to the lanthanide complexes.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2025

Unconventional low temperature decomposition of a saturated hydrocarbon over atomically-dispersed titanium-aluminum-boron catalyst

Sonochemically-synthesized atomically-dispersed titanium-aluminum-boron nanopowder (TiAlB NP) exhibits a remarkable low-temperature catalytic activation of aliphatic C-H bonds at 750 K followed by C-C bond activation thus emerging as a potent low-cost alternative to expensive platinum group metals. Here, the model saturated hydrocarbon, exo-tetrahydrodicyclopentadiene (C10H16), undergoes catalytic decomposition on TiAlB NPs in a chemical microreactor to produce 1,3-cyclopentadiene (c-C5H6), cyclopentene (c-C5H8), and molecular hydrogen (H2) as detected in situ via isomer-selective, single-photon ionization time-of-flight mass spectrometry. Extensive electronic structure theory calculations on model clusters of the catalyst decode a unique synergy among the atomic constituents of the catalyst and chemical bonding in this stepwise, retro Diels Alder reaction: Ti, although insensitive to C-H activation in its metallic state, initiates the catalysis via chemisorption of the hydrocarbon, adjacent B centers readily abstract hydrogen atoms and store them during the catalytic cycle, while Al stabilizes the catalyst structure yet providing space for critical docking sites for the departing hydrocarbons.

Biswas, Souvick↗