Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model and Tool”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

FATE: The drifting Fish Aggregating Device (dFAD) TrajEctory Modeling Tool for Marine Protected Area Management

Drifting fish aggregating devices (dFADs) routinely enter marine protected areas (MPAs) and may undermine MPA protections by drifting out of the MPA with the aggregated fish biomass, or grounding and damaging sensitive coral reef habitats. MPA managers must decide whether to deploy resources in response to dFAD intrusions. To address this issue, we propose to quantify dFAD activity in relation to ocean currents, fish biomass, and animal telemetry at Palmyra Atoll, part of the Pacific Remote Islands Marine National Monument in the central Pacific Ocean. Specifically, we propose to develop the dFAD TrajEctory Tool (FATE). FATE is an innovative decision support tool that will use NASA observations and numerical models to predict future dFAD trajectories and inform TNC and USFWS whether they should deploy tactical resources (boats, personnel) to monitor, intercept, or retrieve dFADs that have entered the Refuge. The objectives are to use NASA observational constraints on ocean winds and currents to assist with the ecological management of the Palmyra Atoll NWR and MPA. Specifically, we will deliver an operational software tool that quantifies the grounding risk associated with each tracked dFAD and decision support for grounding risk mitigation via intercept at sea. This project addresses Element 3.3: Protected area management of the 2022 Ecological Conservation Solicitation by developing a tool needed by MPA managers to make tactical and strategic decisions focused on improving the effectiveness of MPAs. By quantifying the riskof dFADs, this project will help monitor and better inform the deployment of tactical (ships/personnel) and strategic (legislative) resources to better manage MPAs. This project is a collaboration between The Nature Conservancy, who operate long-term projects within the Palmyra MPA, and the U.S. Fish and Wildlife Service, who have the authority to make decisions related to its management. We expect that the results of our proposal will benefit marine resources within the Palmyra MPA and could be transferred to other remote MPAs within the US and other island nations within the Pacific Ocean.

TrajEctory↗

A Quasi-Two-Dimensional Electrochemistry Modeling Tool for Planar Solid Oxide Fuel Cell Stacks

A two-dimensional numerical model is presented for the efficient computation of the steady-state current density, species concentration, and temperature distributions in planar solid oxide fuel cell stacks. The model reduction techniques, engineering approximations, and numerical procedures used to simulate the stack physics while maintaining adequate computational speed are discussed. The results of the model for benchmark cases with and without on-cell methane reformation are presented with comparisons to results from other research described in the literature. The capabilities, performance, and scalability of the model for the study of large multi-cell stacks are then demonstrated.

03 NATURAL GAS↗

Update on Small Modular Reactors Dynamic System Modeling Tool: Web Application

Previous reports focused on the development of component and system models as well as end-to-end system models using Modelica and Dymola for two advanced reactor architectures: (1) Advanced Liquid Metal Reactor and (2) fluoride high-temperature reactor (FHR). The focus of this report is the release of the first beta version of the web-based application for model use and collaboration, as well as an update on the FHR model. The web-based application allows novice users to configure end-to-end system models from preconfigured choices to investigate the instrumentation and controls implications of these designs and allows for the collaborative development of individual component models that can be benchmarked against test systems for potential inclusion in the model library. A description of this application is provided along with examples of its use and a listing and discussion of all the models that currently exist in the library.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development and application of modeling tools for sodium fast reactor inspection

To support the development of in-service inspection methods for the Advanced Sodium Test Reactor for Industrial Demonstration (ASTRID) project led by the French Atomic Energy Commission (CEA), several tools that allow situations specific to Sodium cooled Fast Reactors (SFR) to be modeled have been implemented in the CIVA software and exploited. This paper details specific applications and results obtained. For instance, a new specular reflection model allows the calculation of complex echoes from scattering structures inside the reactor vessel. EMAT transducer simulation models have been implemented to develop new transducers for sodium visualization and imaging. Guided wave analysis tools have been developed to permit defect detection in the vessel shell. Application examples and comparisons with experimental data are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New technology for an ancient fish: A lamprey life cycle modeling tool with an R Shiny application

Lampreys (Petromyzontiformes) are an ancient group of fishes with complex life histories. We created a life cycle model that includes an R Shiny interactive web application interface to simulate abundance by life stage. This will allow scientists and managers to connect available demographic information in a framework that can be applied to questions regarding lamprey biology and conservation. We used Pacific lamprey ( Entosphenus tridentatus ) as a case study to highlight the utility of this model. We applied a global sensitivity analysis to explore the importance of individual life stage parameters to overall population size, and to better understand the implications of existing gaps in knowledge. We also provided example analyses of selected management scenarios (dam passage, fish translocations, and hatchery additions) influencing Pacific lamprey in fresh water. These applications illustrate how the model can be applied to inform conservation efforts. This tool will provide new capabilities for users to explore their own questions about lamprey biology and conservation. Simulations can hone hypotheses and predictions, which can then be empirically tested in the real world.

Gomes, Dylan G. E. (ORCID:0000000226423728)↗

Status of Computational Aerodynamic Modeling Tools for Aircraft Loss-of-Control

A concerted effort has been underway over the past several years to evolve computational capabilities for modeling aircraft loss-of-control under the NASA Aviation Safety Program. A principal goal has been to develop reliable computational tools for predicting and analyzing the non-linear stability & control characteristics of aircraft near stall boundaries affecting safe flight, and for utilizing those predictions for creating augmented flight simulation models that improve pilot training. Pursuing such an ambitious task with limited resources required the forging of close collaborative relationships with a diverse body of computational aerodynamicists and flight simulation experts to leverage their respective research efforts into the creation of NASA tools to meet this goal. Considerable progress has been made and work remains to be done. This paper summarizes the status of the NASA effort to establish computational capabilities for modeling aircraft loss-of-control and offers recommendations for future work.

Frink, Neal T.↗

Comparison of Human Modeling Tools for Efficiency of Prediction of EVA Tasks

Design of ExtraVehicular Activity (EVA) interfaces for International Space Station is important to successful assembly. This is highlighted by the recent rise in the estimate of time required for EVA during the assembly to 900 hours. The traditional method of evaluating EVA design is examination of mockups in neutral buoyancy testing. While effective, this is costly. Any tools for streamlining this process have positive cost and schedule implications for Station design. The human modelling software package Jack has been shown to be a useful tool in computer-aided design of space hardware requiring actuation in EVA. The package has been used to aid in the design of flight hardware for a Station Assembly Mission; evaluation was based on comparison of the computer simulations with neutral buoyancy simulations. When used to predict the feasibility of tasks, the software was found to be effective for reach and visibility evaluation. Some limitations have been encountered in prediction of work clearances. Another human simulator is currently being evaluated using the same hardware and comparisons to the same Neutral Buoyancy simulations. Preliminary results for ERGO, which is derived from robotics software, indicate similar strengths and weaknesses.

Dischinger, H. Charles, Jr.↗

An Extensible High Energy Density Modeling Tool for Extreme Regimes

The overreaching goal of the project is to develop a simulation capability to model an entire High Energy Density (HED) target heated by an X-ray Free Electron Laser (XFEL) beam including the surrounding material with a focus on target material associated with subsequent shots. Our primary objective is to study target fratricide problems, where radiation/debris from the current shot degrade the target for subsequent shots. This work will have a large impact on research being conducted at HED facilities where the quality of data is directly related to the effective repetition rate of the driver, which is often limited by target fratricide problems. This project focuses on a stream of closely spaced droplet targets that are appropriate for new very high repetition rate sources such as the ~1 MHz LCLS-II upgraded XFEL. The capability of the PISALE (Pacific Island Structured-AMR with ALE) code is extended to model this class of problems. We summarize the capability and improvements made to the HED branch of the PISALE code. We discuss our simulations of target fratricide for small (5 micron) hydrogen droplets heated by an XFEL beam at SLAC. We also compare simulations of the initial dynamics of larger (50 micron) water droplets, heated by the same XFEL beam, with experimental data. We briefly discuss training, dissemination, and related activities associated with this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improving Dose Modeling With Dynamic Modeling Tools [Slides]

Utilities aiming for higher fuel enrichment for power uprates or extended operation times before refueling must conduct a new dose analysis. Current conservative dose estimation standards may cause utilities to exceed regulatory limits for proposed increased fuel enrichment. A more accurate modeling of doses from reactor accidents can lower these conservative assumptions. Prescott et al. (2022) demonstrated that the Event Modeling Risk Assessment using Linked Diagrams (EMRALD) software tool, developed at Idaho National Laboratory (INL), can be coupled with the Modular Accident Analysis Program (MAAP5) for dynamic accident analysis in reactor plants. EMRALD forms models of potential accident scenarios, while MAAP5 simulates the accident progression and dose consequences. By integrating these software tools with utility-specific data, a more precise estimation of dose consequences from plant accidents can be achieved. Preliminary findings indicate that EMRALD provides accurate mean core damage frequencies for generalized accident scenarios. Future work includes expanding the model to account for plant-specific data and mitigation factors.

97 - MATHEMATICS AND COMPUTING↗

Evaluation of reliability modeling tools for advanced fault tolerant systems

The Computer Aided Reliability Estimation (CARE III) and Automated Reliability Interactice Estimation System (ARIES 82) reliability tools for application to advanced fault tolerance aerospace systems were evaluated. To determine reliability modeling requirements, the evaluation focused on the Draper Laboratories' Advanced Information Processing System (AIPS) architecture as an example architecture for fault tolerance aerospace systems. Advantages and limitations were identified for each reliability evaluation tool. The CARE III program was designed primarily for analyzing ultrareliable flight control systems. The ARIES 82 program's primary use was to support university research and teaching. Both CARE III and ARIES 82 were not suited for determining the reliability of complex nodal networks of the type used to interconnect processing sites in the AIPS architecture. It was concluded that ARIES was not suitable for modeling advanced fault tolerant systems. It was further concluded that subject to some limitations (the difficulty in modeling systems with unpowered spare modules, systems where equipment maintenance must be considered, systems where failure depends on the sequence in which faults occurred, and systems where multiple faults greater than a double near coincident faults must be considered), CARE III is best suited for evaluating the reliability of advanced tolerant systems for air transport.

Baker, Robert↗

Numerical modeling tools for chemical vapor deposition

Development of general numerical simulation tools for chemical vapor deposition (CVD) was the objective of this study. Physical models of important CVD phenomena were developed and implemented into the commercial computational fluid dynamics software FLUENT. The resulting software can address general geometries as well as the most important phenomena occurring with CVD reactors: fluid flow patterns, temperature and chemical species distribution, gas phase and surface deposition. The physical models are documented which are available and examples are provided of CVD simulation capabilities.

Jasinski, Thomas J.↗

Mobile Building Energy Audit and Modeling Tools: Cooperative Research and Development (Final Report)

Broadly accessible, low cost, accurate, and easy-to-use energy auditing tools remain out of reach for managers of the aging U.S. building population (over 80% of U.S. commercial buildings are more than 10 years old*). concept3D and NREL's commercial buildings group will work to translate and extend NREL's existing spreadsheet-based energy auditing tool for a browser-friendly and mobile-computing platform. NREL will also work with concept3D to further develop a prototype geometry capture and materials inference tool operable on a smart phone/pad platform. These tools will be developed to interoperate with NREL's Building Component Library and OpenStudio energy modeling platforms, and will be marketed by concept3D to commercial developers, academic institutions and governmental agencies. concept3D is NREL's lead developer and subcontractor of the Building Component Library.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

U.S. Department of Energy, Office of Nuclear Energy, Nuclear Fuels Storage and Transportation Planning Project Modeling Tools

The U.S. Department Energy, Office of Nuclear Energy's (DOE-NE) Nuclear Fuels Storage and Transportation (NFST) is developing foundational capabilities and tools to support and inform the future deployment of consolidated interim storage and large-scale transportation of SNF. These tools include Used Nuclear Fuel Storage, Transportation, and Disposal Analysis Resource and Data System (UNF-Standards), Stakeholder Tool for Assessing Radioactive Transportation (START), Transportation and Storage Logistics (TSL), Next- Generation System Analysis Model (NGSAM), Execution Strategy Analysis (ESA), Multi-Objective Evaluation Framework (MOEF), and the Centralized Used Fuel Resource for Information Exchange (CURIE). (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Applying Modeling Tools to Ground System Procedures

As part of a long-term effort to revitalize the Ground Systems (GS) Engineering Section practices, Systems Modeling Language (SysML) and Business Process Model and Notation (BPMN) have been used to model existing GS products and the procedures GS engineers use to produce them.

modeling↗

Analysis of control-oriented wake modeling tools using lidar field results

Abstract. The objective of this paper is to compare field data from a scanning lidar mounted on a turbine to control-oriented wind turbine wake models. The measurements were taken from the turbine nacelle looking downstream at the turbine wake. This field campaign was used to validate control-oriented tools used for wind plant control and optimization. The National Wind Technology Center in Golden, CO, conducted a demonstration of wake steering on a utility-scale turbine. In this campaign, the turbine was operated at various yaw misalignment set points, while a lidar mounted on the nacelle scanned five downstream distances. Primarily, this paper examines measurements taken at 2.35 diameters downstream of the turbine. The lidar measurements were combined with turbine data and measurements of the inflow made by a highly instrumented meteorological mast on-site. This paper presents a quantitative analysis of the lidar data compared to the control-oriented wake models used under different atmospheric conditions and turbine operation. Furthermore, these results show that good agreement is obtained between the lidar data and the models under these different conditions.

17 WIND ENERGY↗

Petri nets as a modeling tool for discrete concurrent tasks of the human operator

The basic concepts of Petri nets are reviewed as well as their application as the fundamental model of technical systems with concurrent discrete events such as hardware systems and software models of computers. The use of Petri nets is proposed for modeling the human operator dealing with concurrent discrete tasks. Their properties useful in modeling the human operator are discussed and practical examples are given. By means of and experimental investigation of binary concurrent tasks which are presented in a serial manner, the representation of human behavior by Petri nets is demonstrated.

Schumacher, W.↗

Integration of discrete-event dynamics and machining dynamics for machine tool: Modeling, analysis and algorithms

Machining dynamics research lays a solid foundation for machining operations by providing stable combinations of spindle speed and depth of cut. Furthermore, machine learning has been applied to predict tool life as a function of cutting speed. However, the existing research does not consider the discrete-event dynamics in machine shop, i.e., the machine tool needs to process a series of parts in queue under various practical production requirements. This paper addresses the integration of discrete-event dynamics and machining dynamics to achieve cost savings in machining. A learning-based cost function is first proposed for the studied integrated optimization problem of machine tool. The proposed cost function utilizes the predicted tool life under different stable cutting speeds for further optimizing speed selection of machine tool to deal with the discrete-event dynamics in machine shop. Then, according to the practical production requirements, effective mathematical optimization models are developed for the related integrated optimization problems with the consideration of cost, makespan and due date, respectively. Numerical results show the effectiveness of our proposed methods and also the potential to be used in practice.

Ma, Mason↗