Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mineralogy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Stress-sensitivity of fracture conductivity of Tuscaloosa Marine Shale cores

Production decline from wells producing from shale rocks is typically quite rapid. One possible factor responsible for such decline is loss in fracture conductivity. This is true in the case of the Tuscaloosa Marine shale reservoir. In this work, the stress-dependent fracture conductivity of TMS core samples is investigated using five propped cores under varying stress conditions. In addition, the effects of static rock mechanical properties and rock mineralogy on conductivity decline are investigated. The mineralogy of each core sample was determined by X-ray Diffraction analysis. Fracture conductivity was measured using a Hassler-type pressure core holder with a pressure rating of 15,000 psi (103.42 MPa). Estimated rock mechanical properties showed that shale anisotropy could affect fracture conductivity. The time decline in conductivity revealed two possible decline trends, a) decline from the reduction in induced fracture width, and b) decline from the healing of developed micro-cracks. An exponential decline in fracture conductivity with increasing confinement pressure was observed with an average decline rate constant of 3.15 x 10 -10 mPa -1 . While rock mineralogy did not have any clear relationship with conductivity decline, the effects of rock mechanical properties were only important at 10.34 MPa confinement pressure and above. The observation showed that a high Young's modulus correlate to high conductivity, whereas a high Poisson's ratio correlate to low conductivity. This study provides useful observations for optimizing fracture design to enhance well productivity in the TMS.

02 PETROLEUM↗
DOE OSTI2022

Dynamics of organic matter molecular composition under aerobic decomposition and their response to the nitrogen addition in grassland soils

Grassland soils store a substantial proportion of the global soil carbon (C) stock. The transformation of C in grassland soils with respect to chemical composition and persistence strongly regulate the predicted terrestrial-atmosphere C flux in global C biogeochemical cycling models. In addition, increasing atmospheric nitrogen (N) deposition alters C chemistry in grassland soils. However, there remains controversy about the importance of mineralogical versus biochemical preservation of soil C, as well as uncertainty regarding how grassland soil C chemistry responds to elevated N. This study used grassland soils with diverse soil organic matter (SOM) chemistries in an 8-month aerobic incubation experiment to evaluate whether the chemical composition of SOM converged across sites over time, and how SOM persistence responded to the N addition. This study demonstrates that over the course of incubation, the richness of labile compounds decreased in soils with less ferrihydrite content, whereas labile compounds were more persistent in ferrihydrite rich soils. In contrast, we found that the richness of more complex compounds increased over the incubation in most sites, independent of soil mineralogy. Moreover, we demonstrate the extent to which the diverse chemical composition of SOM converged among sites in response to microbial decomposition. N fertilization decreased soil respiration and inhibited the convergence of molecular composition across ecosystems by altering N demand for microbial metabolism and chemical interactions between minerals and organic molecules. This study provides original evidence that the decomposition and metabolism of labile organic molecules were largely regulated by soil mineralogy (physicochemical preservation), while the metabolism of more complex organic molecules was controlled by substrate complexity (biochemical preservation) independent to mineral-organic interactions. This study advanced our understanding of the dynamic biogeochemical cycling of C by unveiling that N addition dampened C respiration and diminished the convergence of SOM chemistry across diverse grassland ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Metasomatic alteration of coarse‐grained igneous calcium‐aluminum‐rich inclusions from CK3 carbonaceous chondrites

Abstract We report on the primary and secondary mineralogies of three coarse‐grained igneous calcium‐aluminum‐rich inclusions (CAIs) (Compact Type A [CTA], Type B [B], and forsterite‐bearing type B [FoB]) from the Northwest Africa (NWA) 5343 (CK3.7) and NWA 4964 (CK3.8) carbonaceous chondrites, compare them with the mineralogy of igneous CAIs from the Allende (CV3.6) chondrite, and discuss the nature of the alteration processes that affected the CK and CV CAIs. The primary mineralogy and mineral chemistry of the CK3 CAIs studied are similar to those from Allende; however, primary melilite and anorthite are nearly completely absent. Although the secondary minerals identified in CK CAIs (Al‐diopside, andradite, Cl‐apatite, clintonite, forsterite, ferroan olivine, Fe,Ni‐sulfides, grossular, ilmenite, magnetite, plagioclase, spinel, titanite, and wadalite) occur also in the Allende CAIs, there are several important differences: (i) In addition to melilite and anorthite, which are nearly completely replaced by secondary minerals, the alteration of CK CAIs also affected high‐Ti pyroxenes (fassaite and grossmanite) characterized by high Ti 3+ /Ti 4+ ratio and spinel. These pyroxenes are corroded and crosscut by veins of Fe‐ and Ti‐bearing grossular, Fe‐bearing Al,Ti‐diopside, titanite, and ilmenite. Spinel is corroded by Fe‐bearing Al‐diopside and grossular. (ii) The secondary mineral assemblages of grossular + monticellite and grossular + wollastonite, commonly observed in the Allende CAIs, are absent; the Fe‐bearing grossular + Fe‐bearing Al‐diopside ± Fe,Mg‐spinel, Fe‐bearing grossular + Fe,Mg‐olivine ± Fe,Mg‐spinel, and Ca,Na‐plagioclase + Fe‐bearing Al‐diopside + Fe‐bearing grossular assemblages are present instead. These mineral assemblages are often crosscut by veins of Fe‐bearing Al‐diopside, Fe,Mg‐olivine, Fe,Mg‐spinel, and Ca,Na‐plagioclase. The coarse‐grained secondary grossular and Al‐diopside often show multilayered chemical zoning with distinct compositional boundaries between the layers; the abundances of Fe and Ti typically increase toward the grain edges. (iv) Sodium‐rich secondary minerals, nepheline and sodalite, commonly observed in the peripheral portions of the Allende CAIs, are absent; Ca,Na‐plagioclase is present instead. We conclude that coarse‐grained igneous CAIs from CK3.7–3.8 s and Allende experienced an open‐system multistage metasomatic alteration in the presence of an aqueous solution–infiltration metasomatism. This process resulted in localized mobilization of all major rock‐forming elements: Si, Ca, Al, Ti, Mg, Fe, Mn, Na, K, and Cl. The metasomatic alteration of CK CAIs is more advanced and occurred under higher temperature and higher oxygen fugacity than that of the Allende CAIs.

Geochemistry & Geophysics↗
DOE OSTI2023

The iron oxidation state of Ryugu samples

The Hayabusa2 mission sampled Ryugu, an asteroid that did not suffer extensive thermal metamorphism, and returned rocks to the Earth with no significant air exposure. It therefore offers a unique opportunity to study the redox state of carbonaceous Cb-type asteroids and evaluate the overall redox state of the most primitive rocks of the solar system. An analytical framework was developed to investigate the iron mineralogy and valence state in extraterrestrial material at the micron scale by combining x-ray diffraction, conventional Mössbauer (MS), and nuclear forward scattering (NFS) spectroscopies. An array of standard minerals was analyzed and cross-calibrated between MS and NFS. Then, MS and NFS spectra on three Ryugu grains were collected at the bulk and the micron scales. In Ryugu samples, iron is essentially accommodated in magnetite, clay minerals (serpentine–smectite), and sulfides. Only a single set of Mössbauer parameters was necessary to account for the entire variability observed in MS and NFS spectra, at all spatial scales investigated. These parameters therefore make up a fully consistent iron mineralogical model for the Ryugu samples. As far as MS and NFS spectroscopies are concerned, Ryugu grains are overall similar to each other and share most of their mineralogical features with CI-type chondrites. In detail however, no ferrihydrite is found in Ryugu particles even at the very sensitive scale of Mössbauer spectroscopy. The typical Fe 3+ /Fe tot of clay minerals is much lower than typical redox ratios measured in CI chondrites (Fe 3+ /Fe tot = 85%–90%). Furthermore, magnetite from Ryugu is stoichiometric with no significant maghemite component, whereas up to 12% of maghemite was previously identified in the Orgueil's so-called magnetite. These differences suggest that most CI meteorites suffered terrestrial alteration and that the preterrestrial composition of these carbon-rich samples was less oxidized than previously measured. However, it is not clear yet whether or not the parent bodies of CI chondrites were as reduced as Ryugu. Finally, the high spatial resolution of NFS allows to disentangle the redox state and the crystal chemistry of iron accommodated in serpentine and smectite. The most likely polytype of serpentine is lizardite, containing <35% of Fe 3+ , a fraction of which being tetrahedrally coordinated. Smectite is more oxidized (Fe 3+ /Fe tot > 65%) and mainly contains octahedral ferric iron. In conclusion, this finding implies that these clays formed from highly alkaline fluids and the spatial variability highlighted here may suggest a temporal evolution or a spatial variability of the nature of this fluid.

58 GEOSCIENCES↗
DOE OSTI2021

Fracture Sustainability in Enhanced Geothermal Systems: Experimental and Modeling Constraints

Enhanced geothermal systems (EGS) offer the potential for a much larger energy source than conventional hydrothermal systems. Hot, low-permeability rocks are prevalent at depth around the world, but the challenge of extracting thermal energy depends on the ability to create and sustain open fracture networks. Laboratory experiments were conducted using a suite of selected rock cores (granite, metasediment, rhyolite ash-flow tuff, and silicified rhyolitic tuff) at relevant pressures (uniaxial loading up to 20.7 MPa and fluid pressures up to 10.3 MPa) and temperatures (150–250 °C) to evaluate the potential impacts of circulating fluids through fractured rock by monitoring changes in fracture aperture, mineralogy, permeability, and fluid chemistry. Because a fluid in disequilibrium with the rocks (deionized water) was used for these experiments, there was net dissolution of the rock sample: this increased with increasing temperature and experiment duration. Thermal-hydrological-mechanical-chemical (THMC) modeling simulations were performed for the rhyolite ash-flow tuff experiment to test the ability to predict the observed changes. These simulations were performed in two steps: a thermal-hydrological-mechanical (THM) simulation to evaluate the effects of compression of the fracture, and a thermal-hydrological-chemical (THC) simulation to evaluate the effects of hydrothermal reactions on the fracture mineralogy, porosity, and permeability. Furthermore, these experiments and simulations point out how differences in rock mineralogy, fluid chemistry, and geomechanical properties influence how long asperity-propped fracture apertures may be sustained. Such core-scale experiments and simulations can be used to predict EGS reservoir behavior on the field scale.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

HFTS-1 Natural Joint Data and Engineering Summary

This report provides an analysis of engineering and geologic data collected from the Hydraulic Fracturing Test Site #1 (HTSF-1) project in the southern Midland Basin, Reagan County, Texas. The site is being studied as part of the Science-informed Machine Learning for Accelerating Real-Time Decisions in Subsurface Applications (SMART) Initiative at the National Energy Technology Laboratory (NETL). The data collected is intended to provide a basis of understanding of the site and to construct simulation models. This report provides a summary analysis of the engineering and geologic data collected from the project to provide a basis of understanding of the site and to construct simulation models. The report examines various possible correlations in engineering properties based on natural fracture data from the program, which consisted of 11 horizontal wells, one vertical well, and one slant well. The horizontal wells are in two horizons: 1) Upper and 2) Middle Wolfcamp formations. Program data include: fracture frequency and fracture orientation data from four core runs in a slant well; fracture spacing and orientation from a vertical pilot well; laboratory triaxial testing and mineralogical determinations; and porosity results from magnetic resonance analyses from various wells, together with observations based on the data collection. In addition, available references were reviewed on the site for additional insights. As the focus of the report is on the natural system, hydraulic fracture data from the site were not examined in detail in this report. Data variability is the chief observation in examination of the database. Fracture frequency in the slant well can range from sections with values as high as five fractures per ft to sections up to 100+ ft in length with no natural observed fractures. Fracture spacing across is typically less than 10 ft, but can range up to hundreds of feet. Apparent fracturing shows the trends in two predominate orientations, E-SW and WNW-ESE, but minor variations exist. The rock units vary across the site from siliceous mudstones to calcareous mudstones, showing a general layering with depth. The laboratory properties such as strength and modulus show no apparent trend with depth, but appear to correlate with rock mineralogy with high strength and modulus values where calcium content is high. In addition, an attempt to examine variability and mineralogy on a larger scale was made using a color-coded system based on gamma ray measurements. A staged colored approach was adopted, presuming that lower gamma ray values indicate higher value of calcium content (blue scale) and that higher gamma ray values indicate higher clay mineral content (orange scale). As provided in report appendices, the system correlated well with visual examination of the slant core and the petrofabric analyses of the vertical pilot well. The results showed large variability in mineral content along the horizontal plane across the site. The change in mineral content was also rapid, on a scale less than that of the average hydraulic fracture stage length of about 180 ft.

42 ENGINEERING↗
DOE OSTI2024

Iron dissolution from Patagonian dust in the Southern Ocean: under present and future conditions

Although the input of desert dust as a key source of trace metals in the Southern Ocean (SO) has been previously studied, the dissolution process of metals in surface waters, particularly iron (Fe), remain poorly understood. Given the crucial role of Fe in primary production and the biological carbon pump in the SO, we focused on experimental estimations of Fe dissolution from Patagonian dust, the primary natural dust source in the SO. Our study considered both current and projected future conditions, encompassing sea-surface warming, acidification, increased photosynthetically active radiation, and doubled dust inputs. Through controlled laboratory experiments using filtered SO seawater, conducted over 7 days, we assessed changes in particulate Fe (pFe) concentrations, Fe redox speciation (Fe(II)/Fe(III)), and in the mineralogy of Fe-bearing dust in abiotic condition. The predominant minerals in the dust included quartz and aluminosilicates, with silicon (Si), aluminum (Al), and Fe as the major elements. No significant alterations in the mineralogy and the elemental composition of the dust were recorded during the dissolution experiments, neither under present nor under projected future conditions. The particulate Fe(II)/Fe(III) ratio remained consistently at 0.25 during the experiments, unaffected by changed conditions. Consequently, changes in environmental conditions in the SO would therefore not significantly alter the mineralogy and redox speciation of pFe in the Patagonian dust. On the contrary, pFe exhibited a dissolution rate of 3.8% and 1.6% per day under present and future conditions, respectively. The environmental changes anticipated for 2100 in the SO will likely to result in a decrease in the dissolution rate of pFe. Thus, even though a doubling of dust input by 2100 is anticipated, it will unlikely provide significantly more dissolved Fe (dFe) in seawater in the SO. Consequently, the future intensification of Patagonian dust inputs may not alleviate the Fe limitation in the SO.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Investigation of the Effect of Injected CO 2 on the Morrow B Sandstone through Laboratory Batch Reaction Experiments: Implications for CO 2 Sequestration in the Farnsworth Unit, Northern Texas, USA

About one million tons of CO 2 have been injected into the Farnsworth unit to date. The target reservoir for CO 2 injection is the Morrow B Sandstone, which is primarily made of quartz with lesser amounts of albite, calcite, chlorite, and clay minerals. The impact of CO 2 injection on the mineralogy, porosity, and pore water composition of the Morrow B Sandstone is a major concern. Although numerical modeling studies suggest that porosity changes will be minimal, significant alterations to mineralogy and pore water composition are expected. Given the implications for CO 2 storage effectiveness and risk assessment, it is crucial to verify the accuracy of theoretical model predictions through laboratory experiments. To this end, batch reaction experiments were conducted to model conditions near an injection well in the Morrow B Sandstone and at locations further away, where the CO 2 has been diluted by formation water. The laboratory experiments involved submerging thin sections of both coarse- and fine-grained facies of the Morrow B Sandstone in formation water samples with varying levels of CO 2 . The experiments were conducted at the reservoir temperature of 75 °C. Two experimental runs were conducted, one lasting for 61 days and the other for 72 days. The initial fluid composition used in the second run was the same as in the first. The mineralogy changes in the thin sections were analyzed using SEM and the Tescan Integrated Mineral Analyzer (TIMA), while changes in the composition of the formation water were determined using ICP-AES. During each experiment, a thin layer of white fine-grained particles consisting mainly of dolomite and silica formed on the surface of the thin sections, leading to significant reductions in Ca, Mg, and Sr in the formation water. This outcome is consistent with numerical model predictions that dolomite would be the primary mineral that would react with injected CO 2 and that silica would be oversaturated in the formation water. Changes in mineral abundance in the thin sections themselves were much less systematic than in the theoretical modeling experiments, perhaps reflecting heterogeneities in the mineral grain size surface area to volume ratios and mineral distributions in the thin sections not considered in the numerical models.

58 GEOSCIENCES↗
DOE OSTI2020

Studies on the Encapsulation of Brine Generated from a Process Using Selective Electrodialysis Reversal

This topical report summarizes the laboratory testing, geochemical modeling, and mineralogical testing conducted to examine the efficacy of wastewater encapsulation for the brine generated from the Saltworks Flex electrodialysis reversal technology. Within the laboratory testing, the short- and long-term physical properties of seven separate mix designs were examined along with the leaching of each mix design. Additionally, geochemical thermodynamic modeling was used along with mineralogical analyses to help gain a fundamental understanding of the chemistry involved in the encapsulation process. Encapsulation is a process that results in the immobilization of constituents of interest by creating an engineered material that contains the waste within its matrix, both physically and chemically, in such a manner that the receiving environment is protected from adverse effects. Within the context of this study, encapsulation mix designs involved mixing the Saltworks brine with fly ash and various additives, principally lime (calcium oxide) and cement, to form a paste that eventually sets and hardens into a monolith upon placement in a landfill. Moisture conditioning fly ash with wastewater sources for on-site landfill disposal is a process that is in use at some sites and has been presented as a viable option to dispose of liquid wastes. However, because chemical reactions that can lead to sequestration of constituents of interest are not optimized, leaching can occur. Therefore, in this study, mixes were created to mimic moisture conditioning, as well as engineered pastes of varying mix designs. The study found that engineered encapsulation mixes provide significant resistance to leaching compared to moisture conditioning alone. The best performing encapsulation mix used lime as the additive, which proved superior to the use of cement. After 90 days of curing, this encapsulated mix was 5.5 times stronger than the moisture conditioned mix. Additionally, this mix exhibited an approximate 2.5 order of magnitude drop in hydraulic conductivity compared to the moisture conditioned mix. When comparing leaching, nearly all the chloride was found to evolve from the moisture conditioned mix, whereas only 6.7% of the chlorine contained in the best performing encapsulated mix leached out. Mineralogical analysis via X-ray diffraction (XRD) showed a significant concentration of the chloride sequestering mineral, Friedel’s salt, in the best performing encapsulation mix, whereas none was observed in the moisture conditioned mix, pointing to it being the primary chemical mechanism for chloride retention, along with the physical impermeability of the material. With respect to the modeling study, the model was successful in predicting the presence of most mineral phases observed in the XRD analysis.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Novel Geochemistry Determined from High P-T Simulation Experiments of HFTS 2

A standard method in unconventional oil and gas production is the process of hydraulic fracturing followed by a shut-in period, during which the fracture fluid remains pressurized in the reservoir for up to three weeks before production begins. Despite this widely used process, very little is known about what occurs in the reservoir during this shut-in process. In order to properly delineate potential reservoir reactions that may occur during shut-in that would lead to corrosion and scaling events, experiments were conducted in high pressure, high temperature reactors to simulate conditions of the Wolfcamp Formation in the Delaware Basin. Experimental design allowed the assessment of the effect of proppant, microbiology, and time on the mineralogy and fluid chemistry in the reservoir. Results suggest the biggest impact on fluid chemistry and shale mineralogy during shut-in is time. Analyses demonstrate dissolution of the shale material, with maximum dissolved ions occurring after 7 days of the shut-in period. After 21 days, results suggest precipitation occurs. The Delaware Basin is demonstrated to be high in sulfate content, which further increases in the fluid due to dissolution reactions during shut-in. The pressure vessel experiments suggest there was no significant contribution to reactions from microbiology during the shut-in period. However, early production samples demonstrate a significant selection of the microorganism Caminicella, a genus of which has previously been correlated to corrosion and sulfide production. Results suggest shut-in conditions may provide high sulfate concentrations that could later be utilized by a shifted microbial community to drive potential well infrastructure failure. This is the first study to incorporate microbiology, mineralogy, and fluid chemistry to investigate the fundamental geochemical reactions that occur during shut-in and early phase production of the Delaware Basin. Results from this study can complement observations from the Hydraulic Fracture Test Site 2 observations.

Gulliver, Djuna↗
DOE OSTI2022

Calcium dissolution in bridgmanite in the Earth’s deep mantle

Accurate knowledge of the mineralogy is essential for understanding the lower mantle, which represents more than half of Earth'svolume. CaSiO 3 perovskite is believed to be the third-most-abundant mineral throughout the lower mantle, following bridgmanite and ferropericlase. Here we experimentally show that the calcium solubility in bridgmanite increases steeply at about 2,300 kelvin and above 40 gigapascals to a level sufficient for a complete dissolution of all CaSiO 3 component in pyrolite into bridgmanite, resulting in the disappearance of CaSiO 3 perovskite at depths greater than about 1,800 kilometres along the geotherm. Hence we propose a change from a two-perovskite domain (TPD; bridgmanite plus CaSiO 3 perovskite) at the shallower lower mantle to a single-perovskite domain (SPD; calcium-rich bridgmanite) at the deeper lower mantle. Iron seems to have a key role in increasing the calcium solubility in bridgmanite. The temperature-driven nature can cause large lateral variations in the depth of the TPD-to-SPD change in response to temperature variations (by more than 500 kilometres). Furthermore, the SPD should have been thicker in the past when the mantle was warmer. Our finding requires revision of the deep-mantle mineralogy models and will have an impact on our understanding of the composition, structure, dynamics and evolution of the region.

58 GEOSCIENCES↗
DOE OSTI2024

Gender in Mineral Names

Minerals are the fundamental constituents of Earth, and mineral names appear in scientific literature for disciplines including geology, chemistry, materials science, biology, and medicine, among others. Choosing a name is the full responsibility of the authors of new mineral proposals submitted to the International Mineralogical Association (IMA). Scientific nomenclature and its traditions have evolved over time and, consequently, mineral names track changes in the landscape of mineralogy with respect to language, technology, and culture. To evaluate these changes, the namesake information for all 5896 minerals approved by the IMA or ‘grandfathered’ into use as of December 2022 was recorded and categorized within a workable database. The compiled information yields diverse insights into the intersection of science and culture and could also be used to project future trends. In this study, we used the name database to investigate gender diversity among mineral eponyms. More than half (c. 54%) of all mineral species are named after people, the identities of whom are largely a reflection of the people that have historically been involved, in one way or another, in the geosciences and in the mining industry. Of the 2738 people with minerals named for them, approximately 6.1% are (interpreted to be) women. Nearly all minerals named for women were named during the last sixty years, although the rate of growth in the year-on-year percentage of women among new mineral namesakes has slowed since about 1985. If current and historical trends hold, our model predicts that women will not comprise more than about 10.35% of newly established mineral namesakes in future years. The representation of women among mineral namesakes also differs starkly among countries. For example, Russians comprise 43.11% of women with minerals named for them, but account for only 15.12% of all eponyms. However, there are additional disparities beyond the proportions of namesakes. For scientists who were alive when a mineral was named for them, women were an average of 3.74 years older than men when evaluated over the same timespan (1954–2022). These results demonstrate that gender-based disparities are imprinted into current mineral nomenclature and indicate that gender parity among new mineral namesakes is impossible without unprecedented changes in the upstream demographics that are most likely to affect naming trends.

58 GEOSCIENCES↗
DOE OSTI2023

Geogenic, Anthropogenic, and Authigenic Minerals Hosting Arsenic and Antimony in Yellowknife Bay Sediments

Abstract Yellowknife Bay (Great Slave Lake, Northwest Territories, Canada) is a water body valued by surrounding communities for its subsistence, recreational, and cultural use. Located directly downstream of the former Giant Mine and Con Mine, Yellowknife Bay has received inputs from mine waste streams enriched in arsenic (As), antimony (Sb), and metals since the late 1930s. Lake sediments in Yellowknife Bay provide a record of metal(loid) contamination from aerially deposited roaster stack emissions, mine effluent, and Giant Mine tailings. A sediment sampling program was conducted in Yellowknife Bay to characterize As and Sb mineralogy using scanning electron microscopy-mineral liberation analysis. Mineralogical analysis of As- and Sb-hosted minerals in nine sediment cores suggests that arsenic trioxide (As2O3), originally deposited during the period of peak-mining emissions, has since been transformed into authigenic sulfides (interpreted to be realgar) down core from peak-mining emissions. Arsenic has also been attenuated by iron (Fe)-oxyhydroxides and roaster-generated iron oxides up-core from peak-mining emissions, near the sediment–water interface. The Sb-bearing minerals appear to be stable in Yellowknife Bay sediments, with no conclusive evidence of post-depositional mobility having been identified. The observed prevalence of arsenic trioxide in surface sediments proximal to Giant Mine suggests that As and Sb contamination is ongoing, likely from terrestrial weathering of contaminated soils and shoreline outcrops. Arsenic-bearing oxide minerals prevalent in surface sediments may become unstable should redox conditions in the hypolimnion change; prolonged anoxia could destabilize the As hosting minerals and release As to bottom waters. Therefore, long-term monitoring of the water column, including hypolimnion conditions, in Yellowknife Bay is recommended.

Mineralogy↗
DOE OSTI2022

Fast redox switches lead to rapid transformation of goethite in humid tropical soils: A Mössbauer spectroscopy study

Abstract Humid tropical forest soils experience frequent rainfall, which limits oxygen diffusion and creates redox heterogeneity in upland soils. In this study we gauged the effect of short‐term anoxic conditions on Fe mineralogy of relatively Fe‐ and C‐rich surface soils (C/Fe mole ratio ∼5) from a humid tropical forest in Puerto Rico. Soils subjected to 4‐d oxic/anoxic oscillation were characterized by selective chemical extractions, Mössbauer spectroscopy (MBS), and X‐ray diffraction. Chemical extraction data suggested that rapidly switching redox conditions had subtle effects on bulk Fe mineralogy. Mössbauer, on the other hand, indicated that (a) the soil Fe is a mixture of goethites of varying characteristics with minor contributions from ferrihydrite (<5%) and Fe(III)‐organic matter (OM) phases (∼10%), and (b) anoxic conditions rapidly transformed all forms of goethite to relatively stable Fe oxides. Such fast changes in goethite features could be due to rapid depletion and sorption of bio‐released structural Al or sorbed OM onto residual soil components. The rapid temporal changes in MBS parameters and corresponding pore water nominal oxidation state of C values suggest that Fe‐C transformations in these upland tropical soils are complex and intricately coupled. A comprehensive understanding of the fate of Fe, Al, and OM (Fe‐organic moieties) during redox switches and concurrent changes in pore water chemistry is critical for development of robust transport models in humid tropical soils, which are subject to episodic low‐redox events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Global rare earth element resources: A concise review

Deposits enriched in rare earth elements (REEs) are abundant and diverse in mineralogy, but those of current economic value have extremely limited geographic distribution. Due to rapidly increasing demand and concerns about supply chain security, new and improved methods of prospecting, beneficiation, separation, purification, and recycling are needed. By overviewing the types and geographic distribution of REE reserves globally, their petrogenesis and major mineralogic assemblages, this review aims to provide a foundation for posing new directions for research and development in these areas. In conclusion, our review also seeks to provide a concise summary of important background information that is accessible to researchers from a variety of disciplines who are seeking to engage in this rapidly expanding field.

58 GEOSCIENCES↗